diff options
Diffstat (limited to 'drivers/clk/sunxi-ng/ccu-sun50i-h616.c')
| -rw-r--r-- | drivers/clk/sunxi-ng/ccu-sun50i-h616.c | 60 |
1 files changed, 59 insertions, 1 deletions
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h616.c b/drivers/clk/sunxi-ng/ccu-sun50i-h616.c index 190816c35da9..daa462c7d477 100644 --- a/drivers/clk/sunxi-ng/ccu-sun50i-h616.c +++ b/drivers/clk/sunxi-ng/ccu-sun50i-h616.c @@ -328,10 +328,16 @@ static SUNXI_CCU_M_WITH_MUX_GATE(gpu0_clk, "gpu0", gpu0_parents, 0x670, 24, 1, /* mux */ BIT(31), /* gate */ CLK_SET_RATE_PARENT); + +/* + * This clk is needed as a temporary fall back during GPU PLL freq changes. + * Set CLK_IS_CRITICAL flag to prevent from being disabled. + */ +#define SUN50I_H616_GPU_CLK1_REG 0x674 static SUNXI_CCU_M_WITH_GATE(gpu1_clk, "gpu1", "pll-periph0-2x", 0x674, 0, 2, /* M */ BIT(31),/* gate */ - 0); + CLK_IS_CRITICAL); static SUNXI_CCU_GATE(bus_gpu_clk, "bus-gpu", "psi-ahb1-ahb2", 0x67c, BIT(0), 0); @@ -645,6 +651,20 @@ static const char * const tcon_tv_parents[] = { "pll-video0", "pll-video0-4x", "pll-video1", "pll-video1-4x" }; +static SUNXI_CCU_MUX_WITH_GATE(tcon_lcd0_clk, "tcon-lcd0", + tcon_tv_parents, 0xb60, + 24, 3, /* mux */ + BIT(31), /* gate */ + CLK_SET_RATE_PARENT); +static SUNXI_CCU_MUX_WITH_GATE(tcon_lcd1_clk, "tcon-lcd1", + tcon_tv_parents, 0xb64, + 24, 3, /* mux */ + BIT(31), /* gate */ + CLK_SET_RATE_PARENT); +static SUNXI_CCU_GATE(bus_tcon_lcd0_clk, "bus-tcon-lcd0", "ahb3", + 0xb7c, BIT(0), 0); +static SUNXI_CCU_GATE(bus_tcon_lcd1_clk, "bus-tcon-lcd1", "ahb3", + 0xb7c, BIT(1), 0); static SUNXI_CCU_MP_WITH_MUX_GATE(tcon_tv0_clk, "tcon-tv0", tcon_tv_parents, 0xb80, 0, 4, /* M */ @@ -855,8 +875,12 @@ static struct ccu_common *sun50i_h616_ccu_clks[] = { &hdmi_cec_clk.common, &bus_hdmi_clk.common, &bus_tcon_top_clk.common, + &tcon_lcd0_clk.common, + &tcon_lcd1_clk.common, &tcon_tv0_clk.common, &tcon_tv1_clk.common, + &bus_tcon_lcd0_clk.common, + &bus_tcon_lcd1_clk.common, &bus_tcon_tv0_clk.common, &bus_tcon_tv1_clk.common, &tve0_clk.common, @@ -989,8 +1013,12 @@ static struct clk_hw_onecell_data sun50i_h616_hw_clks = { [CLK_HDMI_CEC] = &hdmi_cec_clk.common.hw, [CLK_BUS_HDMI] = &bus_hdmi_clk.common.hw, [CLK_BUS_TCON_TOP] = &bus_tcon_top_clk.common.hw, + [CLK_TCON_LCD0] = &tcon_lcd0_clk.common.hw, + [CLK_TCON_LCD1] = &tcon_lcd1_clk.common.hw, [CLK_TCON_TV0] = &tcon_tv0_clk.common.hw, [CLK_TCON_TV1] = &tcon_tv1_clk.common.hw, + [CLK_BUS_TCON_LCD0] = &bus_tcon_lcd0_clk.common.hw, + [CLK_BUS_TCON_LCD1] = &bus_tcon_lcd1_clk.common.hw, [CLK_BUS_TCON_TV0] = &bus_tcon_tv0_clk.common.hw, [CLK_BUS_TCON_TV1] = &bus_tcon_tv1_clk.common.hw, [CLK_TVE0] = &tve0_clk.common.hw, @@ -1062,6 +1090,8 @@ static const struct ccu_reset_map sun50i_h616_ccu_resets[] = { [RST_BUS_HDMI] = { 0xb1c, BIT(16) }, [RST_BUS_HDMI_SUB] = { 0xb1c, BIT(17) }, [RST_BUS_TCON_TOP] = { 0xb5c, BIT(16) }, + [RST_BUS_TCON_LCD0] = { 0xb7c, BIT(16) }, + [RST_BUS_TCON_LCD1] = { 0xb7c, BIT(17) }, [RST_BUS_TCON_TV0] = { 0xb9c, BIT(16) }, [RST_BUS_TCON_TV1] = { 0xb9c, BIT(17) }, [RST_BUS_TVE_TOP] = { 0xbbc, BIT(16) }, @@ -1120,6 +1150,19 @@ static struct ccu_pll_nb sun50i_h616_pll_cpu_nb = { .lock = BIT(28), }; +static struct ccu_mux_nb sun50i_h616_gpu_nb = { + .common = &gpu0_clk.common, + .cm = &gpu0_clk.mux, + .delay_us = 1, /* manual doesn't really say */ + .bypass_index = 1, /* GPU_CLK1@400MHz */ +}; + +static struct ccu_pll_nb sun50i_h616_pll_gpu_nb = { + .common = &pll_gpu_clk.common, + .enable = BIT(29), /* LOCK_ENABLE */ + .lock = BIT(28), +}; + static int sun50i_h616_ccu_probe(struct platform_device *pdev) { void __iomem *reg; @@ -1171,6 +1214,14 @@ static int sun50i_h616_ccu_probe(struct platform_device *pdev) writel(val, reg + SUN50I_H616_PLL_AUDIO_REG); /* + * Set the input-divider for the gpu1 clock to 3, to reach a safe 400 MHz. + */ + val = readl(reg + SUN50I_H616_GPU_CLK1_REG); + val &= ~GENMASK(1, 0); + val |= 2; + writel(val, reg + SUN50I_H616_GPU_CLK1_REG); + + /* * First clock parent (osc32K) is unusable for CEC. But since there * is no good way to force parent switch (both run with same frequency), * just set second clock parent here. @@ -1190,6 +1241,13 @@ static int sun50i_h616_ccu_probe(struct platform_device *pdev) /* Re-lock the CPU PLL after any rate changes */ ccu_pll_notifier_register(&sun50i_h616_pll_cpu_nb); + /* Reparent GPU during GPU PLL rate changes */ + ccu_mux_notifier_register(pll_gpu_clk.common.hw.clk, + &sun50i_h616_gpu_nb); + + /* Re-lock the GPU PLL after any rate changes */ + ccu_pll_notifier_register(&sun50i_h616_pll_gpu_nb); + return 0; } |