1 files changed, 10 insertions, 43 deletions

diff --git a/drivers/firmware/efi/libstub/arm32-stub.c b/drivers/firmware/efi/libstub/arm32-stub.c
index 7826553af2ba..40243f524556 100644
--- a/drivers/firmware/efi/libstub/arm32-stub.c
+++ b/drivers/firmware/efi/libstub/arm32-stub.c
@@ -18,7 +18,7 @@ efi_status_t check_platform_features(void)
 	/* LPAE kernels need compatible hardware */
 	block = cpuid_feature_extract(CPUID_EXT_MMFR0, 0);
 	if (block < 5) {
-		pr_efi_err("This LPAE kernel is not supported by your CPU\n");
+		efi_err("This LPAE kernel is not supported by your CPU\n");
 		return EFI_UNSUPPORTED;
 	}
 	return EFI_SUCCESS;
@@ -120,7 +120,7 @@ static efi_status_t reserve_kernel_base(unsigned long dram_base,
 	 */
 	status = efi_get_memory_map(&map);
 	if (status != EFI_SUCCESS) {
-		pr_efi_err("reserve_kernel_base(): Unable to retrieve memory map.\n");
+		efi_err("reserve_kernel_base(): Unable to retrieve memory map.\n");
 		return status;
 	}
 
@@ -162,7 +162,7 @@ static efi_status_t reserve_kernel_base(unsigned long dram_base,
 					     (end - start) / EFI_PAGE_SIZE,
 					     &start);
 			if (status != EFI_SUCCESS) {
-				pr_efi_err("reserve_kernel_base(): alloc failed.\n");
+				efi_err("reserve_kernel_base(): alloc failed.\n");
 				goto out;
 			}
 			break;
@@ -199,14 +199,8 @@ efi_status_t handle_kernel_image(unsigned long *image_addr,
 	unsigned long kernel_base;
 	efi_status_t status;
 
-	/*
-	 * Verify that the DRAM base address is compatible with the ARM
-	 * boot protocol, which determines the base of DRAM by masking
-	 * off the low 27 bits of the address at which the zImage is
-	 * loaded. These assumptions are made by the decompressor,
-	 * before any memory map is available.
-	 */
-	kernel_base = round_up(dram_base, SZ_128M);
+	/* use a 16 MiB aligned base for the decompressed kernel */
+	kernel_base = round_up(dram_base, SZ_16M) + TEXT_OFFSET;
 
 	/*
 	 * Note that some platforms (notably, the Raspberry Pi 2) put
@@ -215,41 +209,14 @@ efi_status_t handle_kernel_image(unsigned long *image_addr,
 	 * base of the kernel image is only partially used at the moment.
 	 * (Up to 5 pages are used for the swapper page tables)
 	 */
-	kernel_base += TEXT_OFFSET - 5 * PAGE_SIZE;
-
-	status = reserve_kernel_base(kernel_base, reserve_addr, reserve_size);
-	if (status != EFI_SUCCESS) {
-		pr_efi_err("Unable to allocate memory for uncompressed kernel.\n");
-		return status;
-	}
-
-	/*
-	 * Relocate the zImage, so that it appears in the lowest 128 MB
-	 * memory window.
-	 */
-	*image_addr = (unsigned long)image->image_base;
-	*image_size = image->image_size;
-	status = efi_relocate_kernel(image_addr, *image_size, *image_size,
-				     kernel_base + MAX_UNCOMP_KERNEL_SIZE, 0, 0);
+	status = reserve_kernel_base(kernel_base - 5 * PAGE_SIZE, reserve_addr,
+				     reserve_size);
 	if (status != EFI_SUCCESS) {
-		pr_efi_err("Failed to relocate kernel.\n");
-		efi_free(*reserve_size, *reserve_addr);
-		*reserve_size = 0;
+		efi_err("Unable to allocate memory for uncompressed kernel.\n");
 		return status;
 	}
 
-	/*
-	 * Check to see if we were able to allocate memory low enough
-	 * in memory. The kernel determines the base of DRAM from the
-	 * address at which the zImage is loaded.
-	 */
-	if (*image_addr + *image_size > dram_base + ZIMAGE_OFFSET_LIMIT) {
-		pr_efi_err("Failed to relocate kernel, no low memory available.\n");
-		efi_free(*reserve_size, *reserve_addr);
-		*reserve_size = 0;
-		efi_free(*image_size, *image_addr);
-		*image_size = 0;
-		return EFI_LOAD_ERROR;
-	}
+	*image_addr = kernel_base;
+	*image_size = 0;
 	return EFI_SUCCESS;
 }