diff options
Diffstat (limited to 'drivers/gpu/drm/amd/display/dc/dc.h')
| -rw-r--r-- | drivers/gpu/drm/amd/display/dc/dc.h | 146 |
1 files changed, 128 insertions, 18 deletions
diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h index dbf8158b832e..bfc5474c0f4c 100644 --- a/drivers/gpu/drm/amd/display/dc/dc.h +++ b/drivers/gpu/drm/amd/display/dc/dc.h @@ -47,7 +47,7 @@ struct aux_payload; struct set_config_cmd_payload; struct dmub_notification; -#define DC_VER "3.2.198" +#define DC_VER "3.2.207" #define MAX_SURFACES 3 #define MAX_PLANES 6 @@ -118,7 +118,26 @@ struct dc_plane_cap { uint32_t min_height; }; -// Color management caps (DPP and MPC) +/** + * DOC: color-management-caps + * + * **Color management caps (DPP and MPC)** + * + * Modules/color calculates various color operations which are translated to + * abstracted HW. DCE 5-12 had almost no important changes, but starting with + * DCN1, every new generation comes with fairly major differences in color + * pipeline. Therefore, we abstract color pipe capabilities so modules/DM can + * decide mapping to HW block based on logical capabilities. + */ + +/** + * struct rom_curve_caps - predefined transfer function caps for degamma and regamma + * @srgb: RGB color space transfer func + * @bt2020: BT.2020 transfer func + * @gamma2_2: standard gamma + * @pq: perceptual quantizer transfer function + * @hlg: hybrid log–gamma transfer function + */ struct rom_curve_caps { uint16_t srgb : 1; uint16_t bt2020 : 1; @@ -127,36 +146,68 @@ struct rom_curve_caps { uint16_t hlg : 1; }; +/** + * struct dpp_color_caps - color pipeline capabilities for display pipe and + * plane blocks + * + * @dcn_arch: all DCE generations treated the same + * @input_lut_shared: shared with DGAM. Input LUT is different than most LUTs, + * just plain 256-entry lookup + * @icsc: input color space conversion + * @dgam_ram: programmable degamma LUT + * @post_csc: post color space conversion, before gamut remap + * @gamma_corr: degamma correction + * @hw_3d_lut: 3D LUT support. It implies a shaper LUT before. It may be shared + * with MPC by setting mpc:shared_3d_lut flag + * @ogam_ram: programmable out/blend gamma LUT + * @ocsc: output color space conversion + * @dgam_rom_for_yuv: pre-defined degamma LUT for YUV planes + * @dgam_rom_caps: pre-definied curve caps for degamma 1D LUT + * @ogam_rom_caps: pre-definied curve caps for regamma 1D LUT + * + * Note: hdr_mult and gamut remap (CTM) are always available in DPP (in that order) + */ struct dpp_color_caps { - uint16_t dcn_arch : 1; // all DCE generations treated the same - // input lut is different than most LUTs, just plain 256-entry lookup - uint16_t input_lut_shared : 1; // shared with DGAM + uint16_t dcn_arch : 1; + uint16_t input_lut_shared : 1; uint16_t icsc : 1; uint16_t dgam_ram : 1; - uint16_t post_csc : 1; // before gamut remap + uint16_t post_csc : 1; uint16_t gamma_corr : 1; - - // hdr_mult and gamut remap always available in DPP (in that order) - // 3d lut implies shaper LUT, - // it may be shared with MPC - check MPC:shared_3d_lut flag uint16_t hw_3d_lut : 1; - uint16_t ogam_ram : 1; // blnd gam + uint16_t ogam_ram : 1; uint16_t ocsc : 1; uint16_t dgam_rom_for_yuv : 1; struct rom_curve_caps dgam_rom_caps; struct rom_curve_caps ogam_rom_caps; }; +/** + * struct mpc_color_caps - color pipeline capabilities for multiple pipe and + * plane combined blocks + * + * @gamut_remap: color transformation matrix + * @ogam_ram: programmable out gamma LUT + * @ocsc: output color space conversion matrix + * @num_3dluts: MPC 3D LUT; always assumes a preceding shaper LUT + * @shared_3d_lut: shared 3D LUT flag. Can be either DPP or MPC, but single + * instance + * @ogam_rom_caps: pre-definied curve caps for regamma 1D LUT + */ struct mpc_color_caps { uint16_t gamut_remap : 1; uint16_t ogam_ram : 1; uint16_t ocsc : 1; - uint16_t num_3dluts : 3; //3d lut always assumes a preceding shaper LUT - uint16_t shared_3d_lut:1; //can be in either DPP or MPC, but single instance - + uint16_t num_3dluts : 3; + uint16_t shared_3d_lut:1; struct rom_curve_caps ogam_rom_caps; }; +/** + * struct dc_color_caps - color pipes capabilities for DPP and MPC hw blocks + * @dpp: color pipes caps for DPP + * @mpc: color pipes caps for MPC + */ struct dc_color_caps { struct dpp_color_caps dpp; struct mpc_color_caps mpc; @@ -350,10 +401,14 @@ struct dc_config { uint8_t vblank_alignment_max_frame_time_diff; bool is_asymmetric_memory; bool is_single_rank_dimm; + bool is_vmin_only_asic; bool use_pipe_ctx_sync_logic; bool ignore_dpref_ss; bool enable_mipi_converter_optimization; bool use_default_clock_table; + bool force_bios_enable_lttpr; + uint8_t force_bios_fixed_vs; + }; enum visual_confirm { @@ -365,6 +420,7 @@ enum visual_confirm { VISUAL_CONFIRM_SWAPCHAIN = 6, VISUAL_CONFIRM_FAMS = 7, VISUAL_CONFIRM_SWIZZLE = 9, + VISUAL_CONFIRM_SUBVP = 14, }; enum dc_psr_power_opts { @@ -386,9 +442,31 @@ enum dcc_option { DCC_HALF_REQ_DISALBE = 2, }; +/** + * enum pipe_split_policy - Pipe split strategy supported by DCN + * + * This enum is used to define the pipe split policy supported by DCN. By + * default, DC favors MPC_SPLIT_DYNAMIC. + */ enum pipe_split_policy { + /** + * @MPC_SPLIT_DYNAMIC: DC will automatically decide how to split the + * pipe in order to bring the best trade-off between performance and + * power consumption. This is the recommended option. + */ MPC_SPLIT_DYNAMIC = 0, + + /** + * @MPC_SPLIT_DYNAMIC: Avoid pipe split, which means that DC will not + * try any sort of split optimization. + */ MPC_SPLIT_AVOID = 1, + + /** + * @MPC_SPLIT_DYNAMIC: With this option, DC will only try to optimize + * the pipe utilization when using a single display; if the user + * connects to a second display, DC will avoid pipe split. + */ MPC_SPLIT_AVOID_MULT_DISP = 2, }; @@ -623,6 +701,14 @@ struct dc_state; struct resource_pool; struct dce_hwseq; +/** + * struct dc_debug_options - DC debug struct + * + * This struct provides a simple mechanism for developers to change some + * configurations, enable/disable features, and activate extra debug options. + * This can be very handy to narrow down whether some specific feature is + * causing an issue or not. + */ struct dc_debug_options { bool native422_support; bool disable_dsc; @@ -642,6 +728,11 @@ struct dc_debug_options { bool disable_stutter; bool use_max_lb; enum dcc_option disable_dcc; + + /** + * @pipe_split_policy: Define which pipe split policy is used by the + * display core. + */ enum pipe_split_policy pipe_split_policy; bool force_single_disp_pipe_split; bool voltage_align_fclk; @@ -715,8 +806,6 @@ struct dc_debug_options { bool validate_dml_output; bool enable_dmcub_surface_flip; bool usbc_combo_phy_reset_wa; - bool disable_dsc_edp; - unsigned int force_dsc_edp_policy; bool enable_dram_clock_change_one_display_vactive; /* TODO - remove once tested */ bool legacy_dp2_lt; @@ -732,7 +821,6 @@ struct dc_debug_options { /* Enable dmub aux for legacy ddc */ bool enable_dmub_aux_for_legacy_ddc; bool disable_fams; - bool optimize_edp_link_rate; /* eDP ILR */ /* FEC/PSR1 sequence enable delay in 100us */ uint8_t fec_enable_delay_in100us; bool enable_driver_sequence_debug; @@ -740,12 +828,14 @@ struct dc_debug_options { int crb_alloc_policy_min_disp_count; bool disable_z10; bool enable_z9_disable_interface; - bool enable_sw_cntl_psr; union dpia_debug_options dpia_debug; bool disable_fixed_vs_aux_timeout_wa; bool force_disable_subvp; bool force_subvp_mclk_switch; bool allow_sw_cursor_fallback; + unsigned int force_subvp_num_ways; + unsigned int force_mall_ss_num_ways; + bool alloc_extra_way_for_cursor; bool force_usr_allow; /* uses value at boot and disables switch */ bool disable_dtb_ref_clk_switch; @@ -759,7 +849,9 @@ struct dc_debug_options { bool use_legacy_soc_bb_mechanism; bool exit_idle_opt_for_cursor_updates; bool enable_single_display_2to1_odm_policy; + bool enable_double_buffered_dsc_pg_support; bool enable_dp_dig_pixel_rate_div_policy; + enum lttpr_mode lttpr_mode_override; }; struct gpu_info_soc_bounding_box_v1_0; @@ -815,6 +907,17 @@ struct dc { uint32_t *dcn_reg_offsets; uint32_t *nbio_reg_offsets; + + /* Scratch memory */ + struct { + struct { + /* + * For matching clock_limits table in driver with table + * from PMFW. + */ + struct _vcs_dpi_voltage_scaling_st clock_limits[DC__VOLTAGE_STATES]; + } update_bw_bounding_box; + } scratch; }; enum frame_buffer_mode { @@ -1018,6 +1121,7 @@ union surface_update_flags { uint32_t clock_change:1; uint32_t stereo_format_change:1; uint32_t lut_3d:1; + uint32_t tmz_changed:1; uint32_t full_update:1; } bits; @@ -1086,6 +1190,9 @@ struct dc_plane_state { /* private to dc_surface.c */ enum dc_irq_source irq_source; struct kref refcount; + struct tg_color visual_confirm_color; + + bool is_statically_allocated; }; struct dc_plane_info { @@ -1505,6 +1612,9 @@ enum dc_status dc_process_dmub_set_mst_slots(const struct dc *dc, uint8_t mst_alloc_slots, uint8_t *mst_slots_in_use); +void dc_process_dmub_dpia_hpd_int_enable(const struct dc *dc, + uint32_t hpd_int_enable); + /******************************************************************************* * DSC Interfaces ******************************************************************************/ |