diff options
Diffstat (limited to 'drivers/hwmon/nct7904.c')
| -rw-r--r-- | drivers/hwmon/nct7904.c | 150 |
1 files changed, 148 insertions, 2 deletions
diff --git a/drivers/hwmon/nct7904.c b/drivers/hwmon/nct7904.c index 1f5743d68984..b0425694f702 100644 --- a/drivers/hwmon/nct7904.c +++ b/drivers/hwmon/nct7904.c @@ -8,6 +8,9 @@ * Copyright (c) 2019 Advantech * Author: Amy.Shih <amy.shih@advantech.com.tw> * + * Copyright (c) 2020 Advantech + * Author: Yuechao Zhao <yuechao.zhao@advantech.com.cn> + * * Supports the following chips: * * Chip #vin #fan #pwm #temp #dts chip ID @@ -20,6 +23,7 @@ #include <linux/i2c.h> #include <linux/mutex.h> #include <linux/hwmon.h> +#include <linux/watchdog.h> #define VENDOR_ID_REG 0x7A /* Any bank */ #define NUVOTON_ID 0x50 @@ -41,6 +45,7 @@ #define FANCTL_MAX 4 /* Counted from 1 */ #define TCPU_MAX 8 /* Counted from 1 */ #define TEMP_MAX 4 /* Counted from 1 */ +#define SMI_STS_MAX 10 /* Counted from 1 */ #define VT_ADC_CTRL0_REG 0x20 /* Bank 0 */ #define VT_ADC_CTRL1_REG 0x21 /* Bank 0 */ @@ -87,18 +92,42 @@ #define FANCTL1_FMR_REG 0x00 /* Bank 3; 1 reg per channel */ #define FANCTL1_OUT_REG 0x10 /* Bank 3; 1 reg per channel */ +#define WDT_LOCK_REG 0xE0 /* W/O Lock Watchdog Register */ +#define WDT_EN_REG 0xE1 /* R/O Watchdog Enable Register */ +#define WDT_STS_REG 0xE2 /* R/O Watchdog Status Register */ +#define WDT_TIMER_REG 0xE3 /* R/W Watchdog Timer Register */ +#define WDT_SOFT_EN 0x55 /* Enable soft watchdog timer */ +#define WDT_SOFT_DIS 0xAA /* Disable soft watchdog timer */ + #define VOLT_MONITOR_MODE 0x0 #define THERMAL_DIODE_MODE 0x1 #define THERMISTOR_MODE 0x3 #define ENABLE_TSI BIT(1) +#define WATCHDOG_TIMEOUT 1 /* 1 minute default timeout */ + +/*The timeout range is 1-255 minutes*/ +#define MIN_TIMEOUT (1 * 60) +#define MAX_TIMEOUT (255 * 60) + +static int timeout; +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, "Watchdog timeout in minutes. 1 <= timeout <= 255, default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) "."); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + static const unsigned short normal_i2c[] = { 0x2d, 0x2e, I2C_CLIENT_END }; struct nct7904_data { struct i2c_client *client; + struct watchdog_device wdt; struct mutex bank_lock; int bank_sel; u32 fanin_mask; @@ -361,6 +390,7 @@ static int nct7904_read_temp(struct device *dev, u32 attr, int channel, struct nct7904_data *data = dev_get_drvdata(dev); int ret, temp; unsigned int reg1, reg2, reg3; + s8 temps; switch (attr) { case hwmon_temp_input: @@ -466,7 +496,8 @@ static int nct7904_read_temp(struct device *dev, u32 attr, int channel, if (ret < 0) return ret; - *val = ret * 1000; + temps = ret; + *val = temps * 1000; return 0; } @@ -889,6 +920,95 @@ static const struct hwmon_chip_info nct7904_chip_info = { .info = nct7904_info, }; +/* + * Watchdog Function + */ +static int nct7904_wdt_start(struct watchdog_device *wdt) +{ + struct nct7904_data *data = watchdog_get_drvdata(wdt); + + /* Enable soft watchdog timer */ + return nct7904_write_reg(data, BANK_0, WDT_LOCK_REG, WDT_SOFT_EN); +} + +static int nct7904_wdt_stop(struct watchdog_device *wdt) +{ + struct nct7904_data *data = watchdog_get_drvdata(wdt); + + return nct7904_write_reg(data, BANK_0, WDT_LOCK_REG, WDT_SOFT_DIS); +} + +static int nct7904_wdt_set_timeout(struct watchdog_device *wdt, + unsigned int timeout) +{ + struct nct7904_data *data = watchdog_get_drvdata(wdt); + /* + * The NCT7904 is very special in watchdog function. + * Its minimum unit is minutes. And wdt->timeout needs + * to match the actual timeout selected. So, this needs + * to be: wdt->timeout = timeout / 60 * 60. + * For example, if the user configures a timeout of + * 119 seconds, the actual timeout will be 60 seconds. + * So, wdt->timeout must then be set to 60 seconds. + */ + wdt->timeout = timeout / 60 * 60; + + return nct7904_write_reg(data, BANK_0, WDT_TIMER_REG, + wdt->timeout / 60); +} + +static int nct7904_wdt_ping(struct watchdog_device *wdt) +{ + /* + * Note: + * NCT7904 does not support refreshing WDT_TIMER_REG register when + * the watchdog is active. Please disable watchdog before feeding + * the watchdog and enable it again. + */ + struct nct7904_data *data = watchdog_get_drvdata(wdt); + int ret; + + /* Disable soft watchdog timer */ + ret = nct7904_write_reg(data, BANK_0, WDT_LOCK_REG, WDT_SOFT_DIS); + if (ret < 0) + return ret; + + /* feed watchdog */ + ret = nct7904_write_reg(data, BANK_0, WDT_TIMER_REG, wdt->timeout / 60); + if (ret < 0) + return ret; + + /* Enable soft watchdog timer */ + return nct7904_write_reg(data, BANK_0, WDT_LOCK_REG, WDT_SOFT_EN); +} + +static unsigned int nct7904_wdt_get_timeleft(struct watchdog_device *wdt) +{ + struct nct7904_data *data = watchdog_get_drvdata(wdt); + int ret; + + ret = nct7904_read_reg(data, BANK_0, WDT_TIMER_REG); + if (ret < 0) + return 0; + + return ret * 60; +} + +static const struct watchdog_info nct7904_wdt_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE, + .identity = "nct7904 watchdog", +}; + +static const struct watchdog_ops nct7904_wdt_ops = { + .owner = THIS_MODULE, + .start = nct7904_wdt_start, + .stop = nct7904_wdt_stop, + .ping = nct7904_wdt_ping, + .set_timeout = nct7904_wdt_set_timeout, + .get_timeleft = nct7904_wdt_get_timeleft, +}; + static int nct7904_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -1009,10 +1129,36 @@ static int nct7904_probe(struct i2c_client *client, data->fan_mode[i] = ret; } + /* Read all of SMI status register to clear alarms */ + for (i = 0; i < SMI_STS_MAX; i++) { + ret = nct7904_read_reg(data, BANK_0, SMI_STS1_REG + i); + if (ret < 0) + return ret; + } + hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, data, &nct7904_chip_info, NULL); - return PTR_ERR_OR_ZERO(hwmon_dev); + ret = PTR_ERR_OR_ZERO(hwmon_dev); + if (ret) + return ret; + + /* Watchdog initialization */ + data->wdt.ops = &nct7904_wdt_ops; + data->wdt.info = &nct7904_wdt_info; + + data->wdt.timeout = WATCHDOG_TIMEOUT * 60; /* Set default timeout */ + data->wdt.min_timeout = MIN_TIMEOUT; + data->wdt.max_timeout = MAX_TIMEOUT; + data->wdt.parent = &client->dev; + + watchdog_init_timeout(&data->wdt, timeout * 60, &client->dev); + watchdog_set_nowayout(&data->wdt, nowayout); + watchdog_set_drvdata(&data->wdt, data); + + watchdog_stop_on_unregister(&data->wdt); + + return devm_watchdog_register_device(dev, &data->wdt); } static const struct i2c_device_id nct7904_id[] = { |