diff options
Diffstat (limited to 'drivers/i3c/master/svc-i3c-master.c')
| -rw-r--r-- | drivers/i3c/master/svc-i3c-master.c | 84 |
1 files changed, 75 insertions, 9 deletions
diff --git a/drivers/i3c/master/svc-i3c-master.c b/drivers/i3c/master/svc-i3c-master.c index 0a68fd1b81d4..a7bfc678153e 100644 --- a/drivers/i3c/master/svc-i3c-master.c +++ b/drivers/i3c/master/svc-i3c-master.c @@ -127,6 +127,8 @@ /* This parameter depends on the implementation and may be tuned */ #define SVC_I3C_FIFO_SIZE 16 +#define SVC_I3C_PPBAUD_MAX 15 +#define SVC_I3C_QUICK_I2C_CLK 4170000 #define SVC_I3C_EVENT_IBI BIT(0) #define SVC_I3C_EVENT_HOTJOIN BIT(1) @@ -182,6 +184,7 @@ struct svc_i3c_regs_save { * @ibi.lock: IBI lock * @lock: Transfer lock, protect between IBI work thread and callbacks from master * @enabled_events: Bit masks for enable events (IBI, HotJoin). + * @mctrl_config: Configuration value in SVC_I3C_MCTRL for setting speed back. */ struct svc_i3c_master { struct i3c_master_controller base; @@ -212,6 +215,7 @@ struct svc_i3c_master { } ibi; struct mutex lock; int enabled_events; + u32 mctrl_config; }; /** @@ -529,12 +533,61 @@ static irqreturn_t svc_i3c_master_irq_handler(int irq, void *dev_id) return IRQ_HANDLED; } +static int svc_i3c_master_set_speed(struct i3c_master_controller *m, + enum i3c_open_drain_speed speed) +{ + struct svc_i3c_master *master = to_svc_i3c_master(m); + struct i3c_bus *bus = i3c_master_get_bus(&master->base); + u32 ppbaud, odbaud, odhpp, mconfig; + unsigned long fclk_rate; + int ret; + + ret = pm_runtime_resume_and_get(master->dev); + if (ret < 0) { + dev_err(master->dev, "<%s> Cannot get runtime PM.\n", __func__); + return ret; + } + + switch (speed) { + case I3C_OPEN_DRAIN_SLOW_SPEED: + fclk_rate = clk_get_rate(master->fclk); + if (!fclk_rate) { + ret = -EINVAL; + goto rpm_out; + } + /* + * Set 50% duty-cycle I2C speed to I3C OPEN-DRAIN mode, so the first + * broadcast address is visible to all I2C/I3C devices on the I3C bus. + * I3C device working as a I2C device will turn off its 50ns Spike + * Filter to change to I3C mode. + */ + mconfig = master->mctrl_config; + ppbaud = FIELD_GET(GENMASK(11, 8), mconfig); + odhpp = 0; + odbaud = DIV_ROUND_UP(fclk_rate, bus->scl_rate.i2c * (2 + 2 * ppbaud)) - 1; + mconfig &= ~GENMASK(24, 16); + mconfig |= SVC_I3C_MCONFIG_ODBAUD(odbaud) | SVC_I3C_MCONFIG_ODHPP(odhpp); + writel(mconfig, master->regs + SVC_I3C_MCONFIG); + break; + case I3C_OPEN_DRAIN_NORMAL_SPEED: + writel(master->mctrl_config, master->regs + SVC_I3C_MCONFIG); + break; + } + +rpm_out: + pm_runtime_mark_last_busy(master->dev); + pm_runtime_put_autosuspend(master->dev); + + return ret; +} + static int svc_i3c_master_bus_init(struct i3c_master_controller *m) { struct svc_i3c_master *master = to_svc_i3c_master(m); struct i3c_bus *bus = i3c_master_get_bus(m); struct i3c_device_info info = {}; unsigned long fclk_rate, fclk_period_ns; + unsigned long i2c_period_ns, i2c_scl_rate, i3c_scl_rate; unsigned int high_period_ns, od_low_period_ns; u32 ppbaud, pplow, odhpp, odbaud, odstop, i2cbaud, reg; int ret; @@ -555,12 +608,15 @@ static int svc_i3c_master_bus_init(struct i3c_master_controller *m) } fclk_period_ns = DIV_ROUND_UP(1000000000, fclk_rate); + i2c_period_ns = DIV_ROUND_UP(1000000000, bus->scl_rate.i2c); + i2c_scl_rate = bus->scl_rate.i2c; + i3c_scl_rate = bus->scl_rate.i3c; /* * Using I3C Push-Pull mode, target is 12.5MHz/80ns period. * Simplest configuration is using a 50% duty-cycle of 40ns. */ - ppbaud = DIV_ROUND_UP(40, fclk_period_ns) - 1; + ppbaud = DIV_ROUND_UP(fclk_rate / 2, i3c_scl_rate) - 1; pplow = 0; /* @@ -570,7 +626,7 @@ static int svc_i3c_master_bus_init(struct i3c_master_controller *m) */ odhpp = 1; high_period_ns = (ppbaud + 1) * fclk_period_ns; - odbaud = DIV_ROUND_UP(240 - high_period_ns, high_period_ns) - 1; + odbaud = DIV_ROUND_UP(fclk_rate, SVC_I3C_QUICK_I2C_CLK * (1 + ppbaud)) - 2; od_low_period_ns = (odbaud + 1) * high_period_ns; switch (bus->mode) { @@ -579,20 +635,27 @@ static int svc_i3c_master_bus_init(struct i3c_master_controller *m) odstop = 0; break; case I3C_BUS_MODE_MIXED_FAST: - case I3C_BUS_MODE_MIXED_LIMITED: /* * Using I2C Fm+ mode, target is 1MHz/1000ns, the difference * between the high and low period does not really matter. */ - i2cbaud = DIV_ROUND_UP(1000, od_low_period_ns) - 2; + i2cbaud = DIV_ROUND_UP(i2c_period_ns, od_low_period_ns) - 2; odstop = 1; break; + case I3C_BUS_MODE_MIXED_LIMITED: case I3C_BUS_MODE_MIXED_SLOW: - /* - * Using I2C Fm mode, target is 0.4MHz/2500ns, with the same - * constraints as the FM+ mode. - */ - i2cbaud = DIV_ROUND_UP(2500, od_low_period_ns) - 2; + /* I3C PP + I3C OP + I2C OP both use i2c clk rate */ + if (ppbaud > SVC_I3C_PPBAUD_MAX) { + ppbaud = SVC_I3C_PPBAUD_MAX; + pplow = DIV_ROUND_UP(fclk_rate, i3c_scl_rate) - (2 + 2 * ppbaud); + } + + high_period_ns = (ppbaud + 1) * fclk_period_ns; + odhpp = 0; + odbaud = DIV_ROUND_UP(fclk_rate, i2c_scl_rate * (2 + 2 * ppbaud)) - 1; + + od_low_period_ns = (odbaud + 1) * high_period_ns; + i2cbaud = DIV_ROUND_UP(i2c_period_ns, od_low_period_ns) - 2; odstop = 1; break; default: @@ -611,6 +674,7 @@ static int svc_i3c_master_bus_init(struct i3c_master_controller *m) SVC_I3C_MCONFIG_I2CBAUD(i2cbaud); writel(reg, master->regs + SVC_I3C_MCONFIG); + master->mctrl_config = reg; /* Master core's registration */ ret = i3c_master_get_free_addr(m, 0); if (ret < 0) @@ -1645,6 +1709,7 @@ static const struct i3c_master_controller_ops svc_i3c_master_ops = { .disable_ibi = svc_i3c_master_disable_ibi, .enable_hotjoin = svc_i3c_master_enable_hotjoin, .disable_hotjoin = svc_i3c_master_disable_hotjoin, + .set_speed = svc_i3c_master_set_speed, }; static int svc_i3c_master_prepare_clks(struct svc_i3c_master *master) @@ -1775,6 +1840,7 @@ static void svc_i3c_master_remove(struct platform_device *pdev) { struct svc_i3c_master *master = platform_get_drvdata(pdev); + cancel_work_sync(&master->hj_work); i3c_master_unregister(&master->base); pm_runtime_dont_use_autosuspend(&pdev->dev); |