diff options
Diffstat (limited to 'drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c')
| -rw-r--r-- | drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 45 |
1 files changed, 37 insertions, 8 deletions
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c index 84d219ae6aee..0b776cb91928 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c @@ -27,7 +27,8 @@ * - FIFO size: 4KB * * - LSM6DSO/LSM6DSOX/ASM330LHH/LSM6DSR/ISM330DHCX: - * - Accelerometer/Gyroscope supported ODR [Hz]: 13, 26, 52, 104, 208, 416 + * - Accelerometer/Gyroscope supported ODR [Hz]: 13, 26, 52, 104, 208, 416, + * 833 * - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16 * - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000 * - FIFO size: 3KB @@ -791,7 +792,8 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = { .odr_avl[3] = { 104000, 0x04 }, .odr_avl[4] = { 208000, 0x05 }, .odr_avl[5] = { 416000, 0x06 }, - .odr_len = 6, + .odr_avl[6] = { 833000, 0x07 }, + .odr_len = 7, }, [ST_LSM6DSX_ID_GYRO] = { .reg = { @@ -804,7 +806,8 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = { .odr_avl[3] = { 104000, 0x04 }, .odr_avl[4] = { 208000, 0x05 }, .odr_avl[5] = { 416000, 0x06 }, - .odr_len = 6, + .odr_avl[6] = { 833000, 0x07 }, + .odr_len = 7, }, }, .fs_table = { @@ -994,7 +997,8 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = { .odr_avl[3] = { 104000, 0x04 }, .odr_avl[4] = { 208000, 0x05 }, .odr_avl[5] = { 416000, 0x06 }, - .odr_len = 6, + .odr_avl[6] = { 833000, 0x07 }, + .odr_len = 7, }, [ST_LSM6DSX_ID_GYRO] = { .reg = { @@ -1007,7 +1011,8 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = { .odr_avl[3] = { 104000, 0x04 }, .odr_avl[4] = { 208000, 0x05 }, .odr_avl[5] = { 416000, 0x06 }, - .odr_len = 6, + .odr_avl[6] = { 833000, 0x07 }, + .odr_len = 7, }, }, .fs_table = { @@ -1171,7 +1176,8 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = { .odr_avl[3] = { 104000, 0x04 }, .odr_avl[4] = { 208000, 0x05 }, .odr_avl[5] = { 416000, 0x06 }, - .odr_len = 6, + .odr_avl[6] = { 833000, 0x07 }, + .odr_len = 7, }, [ST_LSM6DSX_ID_GYRO] = { .reg = { @@ -1184,7 +1190,8 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = { .odr_avl[3] = { 104000, 0x04 }, .odr_avl[4] = { 208000, 0x05 }, .odr_avl[5] = { 416000, 0x06 }, - .odr_len = 6, + .odr_avl[6] = { 833000, 0x07 }, + .odr_len = 7, }, }, .fs_table = { @@ -2036,11 +2043,21 @@ static int st_lsm6dsx_init_hw_timer(struct st_lsm6dsx_hw *hw) return 0; } -static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw) +static int st_lsm6dsx_reset_device(struct st_lsm6dsx_hw *hw) { const struct st_lsm6dsx_reg *reg; int err; + /* + * flush hw FIFO before device reset in order to avoid + * possible races on interrupt line 1. If the first interrupt + * line is asserted during hw reset the device will work in + * I3C-only mode (if it is supported) + */ + err = st_lsm6dsx_flush_fifo(hw); + if (err < 0 && err != -ENOTSUPP) + return err; + /* device sw reset */ reg = &hw->settings->reset; err = regmap_update_bits(hw->regmap, reg->addr, reg->mask, @@ -2059,6 +2076,18 @@ static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw) msleep(50); + return 0; +} + +static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw) +{ + const struct st_lsm6dsx_reg *reg; + int err; + + err = st_lsm6dsx_reset_device(hw); + if (err < 0) + return err; + /* enable Block Data Update */ reg = &hw->settings->bdu; err = regmap_update_bits(hw->regmap, reg->addr, reg->mask, |