diff options
Diffstat (limited to 'drivers/media/cec/platform/seco/seco-cec.c')
| -rw-r--r-- | drivers/media/cec/platform/seco/seco-cec.c | 803 |
1 files changed, 803 insertions, 0 deletions
diff --git a/drivers/media/cec/platform/seco/seco-cec.c b/drivers/media/cec/platform/seco/seco-cec.c new file mode 100644 index 000000000000..075dd79beb6f --- /dev/null +++ b/drivers/media/cec/platform/seco/seco-cec.c @@ -0,0 +1,803 @@ +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause +/* + * CEC driver for SECO X86 Boards + * + * Author: Ettore Chimenti <ek5.chimenti@gmail.com> + * Copyright (C) 2018, SECO SpA. + * Copyright (C) 2018, Aidilab Srl. + */ + +#include <linux/module.h> +#include <linux/acpi.h> +#include <linux/delay.h> +#include <linux/dmi.h> +#include <linux/gpio/consumer.h> +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/platform_device.h> + +/* CEC Framework */ +#include <media/cec-notifier.h> + +#include "seco-cec.h" + +struct secocec_data { + struct device *dev; + struct platform_device *pdev; + struct cec_adapter *cec_adap; + struct cec_notifier *notifier; + struct rc_dev *ir; + char ir_input_phys[32]; + int irq; +}; + +#define smb_wr16(cmd, data) smb_word_op(CMD_WORD_DATA, SECOCEC_MICRO_ADDRESS, \ + cmd, data, SMBUS_WRITE, NULL) +#define smb_rd16(cmd, res) smb_word_op(CMD_WORD_DATA, SECOCEC_MICRO_ADDRESS, \ + cmd, 0, SMBUS_READ, res) + +static int smb_word_op(short data_format, u16 slave_addr, u8 cmd, u16 data, + u8 operation, u16 *result) +{ + unsigned int count; + short _data_format; + int status = 0; + + switch (data_format) { + case CMD_BYTE_DATA: + _data_format = BRA_SMB_CMD_BYTE_DATA; + break; + case CMD_WORD_DATA: + _data_format = BRA_SMB_CMD_WORD_DATA; + break; + default: + return -EINVAL; + } + + /* Active wait until ready */ + for (count = 0; count <= SMBTIMEOUT; ++count) { + if (!(inb(HSTS) & BRA_INUSE_STS)) + break; + udelay(SMB_POLL_UDELAY); + } + + if (count > SMBTIMEOUT) + /* Reset the lock instead of failing */ + outb(0xff, HSTS); + + outb(0x00, HCNT); + outb((u8)(slave_addr & 0xfe) | operation, XMIT_SLVA); + outb(cmd, HCMD); + inb(HCNT); + + if (operation == SMBUS_WRITE) { + outb((u8)data, HDAT0); + outb((u8)(data >> 8), HDAT1); + } + + outb(BRA_START + _data_format, HCNT); + + for (count = 0; count <= SMBTIMEOUT; count++) { + if (!(inb(HSTS) & BRA_HOST_BUSY)) + break; + udelay(SMB_POLL_UDELAY); + } + + if (count > SMBTIMEOUT) { + status = -EBUSY; + goto err; + } + + if (inb(HSTS) & BRA_HSTS_ERR_MASK) { + status = -EIO; + goto err; + } + + if (operation == SMBUS_READ) + *result = ((inb(HDAT0) & 0xff) + ((inb(HDAT1) & 0xff) << 8)); + +err: + outb(0xff, HSTS); + return status; +} + +static int secocec_adap_enable(struct cec_adapter *adap, bool enable) +{ + struct secocec_data *cec = cec_get_drvdata(adap); + struct device *dev = cec->dev; + u16 val = 0; + int status; + + if (enable) { + /* Clear the status register */ + status = smb_rd16(SECOCEC_STATUS_REG_1, &val); + if (status) + goto err; + + status = smb_wr16(SECOCEC_STATUS_REG_1, val); + if (status) + goto err; + + /* Enable the interrupts */ + status = smb_rd16(SECOCEC_ENABLE_REG_1, &val); + if (status) + goto err; + + status = smb_wr16(SECOCEC_ENABLE_REG_1, + val | SECOCEC_ENABLE_REG_1_CEC); + if (status) + goto err; + + dev_dbg(dev, "Device enabled"); + } else { + /* Clear the status register */ + status = smb_rd16(SECOCEC_STATUS_REG_1, &val); + status = smb_wr16(SECOCEC_STATUS_REG_1, val); + + /* Disable the interrupts */ + status = smb_rd16(SECOCEC_ENABLE_REG_1, &val); + status = smb_wr16(SECOCEC_ENABLE_REG_1, val & + ~SECOCEC_ENABLE_REG_1_CEC & + ~SECOCEC_ENABLE_REG_1_IR); + + dev_dbg(dev, "Device disabled"); + } + + return 0; +err: + return status; +} + +static int secocec_adap_log_addr(struct cec_adapter *adap, u8 logical_addr) +{ + u16 enable_val = 0; + int status; + + /* Disable device */ + status = smb_rd16(SECOCEC_ENABLE_REG_1, &enable_val); + if (status) + return status; + + status = smb_wr16(SECOCEC_ENABLE_REG_1, + enable_val & ~SECOCEC_ENABLE_REG_1_CEC); + if (status) + return status; + + /* Write logical address + * NOTE: CEC_LOG_ADDR_INVALID is mapped to the 'Unregistered' LA + */ + status = smb_wr16(SECOCEC_DEVICE_LA, logical_addr & 0xf); + if (status) + return status; + + /* Re-enable device */ + status = smb_wr16(SECOCEC_ENABLE_REG_1, + enable_val | SECOCEC_ENABLE_REG_1_CEC); + if (status) + return status; + + return 0; +} + +static int secocec_adap_transmit(struct cec_adapter *adap, u8 attempts, + u32 signal_free_time, struct cec_msg *msg) +{ + u16 payload_len, payload_id_len, destination, val = 0; + u8 *payload_msg; + int status; + u8 i; + + /* Device msg len already accounts for header */ + payload_id_len = msg->len - 1; + + /* Send data length */ + status = smb_wr16(SECOCEC_WRITE_DATA_LENGTH, payload_id_len); + if (status) + goto err; + + /* Send Operation ID if present */ + if (payload_id_len > 0) { + status = smb_wr16(SECOCEC_WRITE_OPERATION_ID, msg->msg[1]); + if (status) + goto err; + } + /* Send data if present */ + if (payload_id_len > 1) { + /* Only data; */ + payload_len = msg->len - 2; + payload_msg = &msg->msg[2]; + + /* Copy message into registers */ + for (i = 0; i < payload_len; i += 2) { + /* hi byte */ + val = payload_msg[i + 1] << 8; + + /* lo byte */ + val |= payload_msg[i]; + + status = smb_wr16(SECOCEC_WRITE_DATA_00 + i / 2, val); + if (status) + goto err; + } + } + /* Send msg source/destination and fire msg */ + destination = msg->msg[0]; + status = smb_wr16(SECOCEC_WRITE_BYTE0, destination); + if (status) + goto err; + + return 0; + +err: + return status; +} + +static void secocec_tx_done(struct cec_adapter *adap, u16 status_val) +{ + if (status_val & SECOCEC_STATUS_TX_ERROR_MASK) { + if (status_val & SECOCEC_STATUS_TX_NACK_ERROR) + cec_transmit_attempt_done(adap, CEC_TX_STATUS_NACK); + else + cec_transmit_attempt_done(adap, CEC_TX_STATUS_ERROR); + } else { + cec_transmit_attempt_done(adap, CEC_TX_STATUS_OK); + } + + /* Reset status reg */ + status_val = SECOCEC_STATUS_TX_ERROR_MASK | + SECOCEC_STATUS_MSG_SENT_MASK | + SECOCEC_STATUS_TX_NACK_ERROR; + smb_wr16(SECOCEC_STATUS, status_val); +} + +static void secocec_rx_done(struct cec_adapter *adap, u16 status_val) +{ + struct secocec_data *cec = cec_get_drvdata(adap); + struct device *dev = cec->dev; + struct cec_msg msg = { }; + bool flag_overflow = false; + u8 payload_len, i = 0; + u8 *payload_msg; + u16 val = 0; + int status; + + if (status_val & SECOCEC_STATUS_RX_OVERFLOW_MASK) { + /* NOTE: Untested, it also might not be necessary */ + dev_warn(dev, "Received more than 16 bytes. Discarding"); + flag_overflow = true; + } + + if (status_val & SECOCEC_STATUS_RX_ERROR_MASK) { + dev_warn(dev, "Message received with errors. Discarding"); + status = -EIO; + goto rxerr; + } + + /* Read message length */ + status = smb_rd16(SECOCEC_READ_DATA_LENGTH, &val); + if (status) + return; + + /* Device msg len already accounts for the header */ + msg.len = min(val + 1, CEC_MAX_MSG_SIZE); + + /* Read logical address */ + status = smb_rd16(SECOCEC_READ_BYTE0, &val); + if (status) + return; + + /* device stores source LA and destination */ + msg.msg[0] = val; + + /* Read operation ID */ + status = smb_rd16(SECOCEC_READ_OPERATION_ID, &val); + if (status) + return; + + msg.msg[1] = val; + + /* Read data if present */ + if (msg.len > 1) { + payload_len = msg.len - 2; + payload_msg = &msg.msg[2]; + + /* device stores 2 bytes in every 16-bit val */ + for (i = 0; i < payload_len; i += 2) { + status = smb_rd16(SECOCEC_READ_DATA_00 + i / 2, &val); + if (status) + return; + + /* low byte, skipping header */ + payload_msg[i] = val & 0x00ff; + + /* hi byte */ + payload_msg[i + 1] = (val & 0xff00) >> 8; + } + } + + cec_received_msg(cec->cec_adap, &msg); + + /* Reset status reg */ + status_val = SECOCEC_STATUS_MSG_RECEIVED_MASK; + if (flag_overflow) + status_val |= SECOCEC_STATUS_RX_OVERFLOW_MASK; + + status = smb_wr16(SECOCEC_STATUS, status_val); + + return; + +rxerr: + /* Reset error reg */ + status_val = SECOCEC_STATUS_MSG_RECEIVED_MASK | + SECOCEC_STATUS_RX_ERROR_MASK; + if (flag_overflow) + status_val |= SECOCEC_STATUS_RX_OVERFLOW_MASK; + smb_wr16(SECOCEC_STATUS, status_val); +} + +static const struct cec_adap_ops secocec_cec_adap_ops = { + /* Low-level callbacks */ + .adap_enable = secocec_adap_enable, + .adap_log_addr = secocec_adap_log_addr, + .adap_transmit = secocec_adap_transmit, +}; + +#ifdef CONFIG_CEC_SECO_RC +static int secocec_ir_probe(void *priv) +{ + struct secocec_data *cec = priv; + struct device *dev = cec->dev; + int status; + u16 val; + + /* Prepare the RC input device */ + cec->ir = devm_rc_allocate_device(dev, RC_DRIVER_SCANCODE); + if (!cec->ir) + return -ENOMEM; + + snprintf(cec->ir_input_phys, sizeof(cec->ir_input_phys), + "%s/input0", dev_name(dev)); + + cec->ir->device_name = dev_name(dev); + cec->ir->input_phys = cec->ir_input_phys; + cec->ir->input_id.bustype = BUS_HOST; + cec->ir->input_id.vendor = 0; + cec->ir->input_id.product = 0; + cec->ir->input_id.version = 1; + cec->ir->driver_name = SECOCEC_DEV_NAME; + cec->ir->allowed_protocols = RC_PROTO_BIT_RC5; + cec->ir->priv = cec; + cec->ir->map_name = RC_MAP_HAUPPAUGE; + cec->ir->timeout = MS_TO_NS(100); + + /* Clear the status register */ + status = smb_rd16(SECOCEC_STATUS_REG_1, &val); + if (status != 0) + goto err; + + status = smb_wr16(SECOCEC_STATUS_REG_1, val); + if (status != 0) + goto err; + + /* Enable the interrupts */ + status = smb_rd16(SECOCEC_ENABLE_REG_1, &val); + if (status != 0) + goto err; + + status = smb_wr16(SECOCEC_ENABLE_REG_1, + val | SECOCEC_ENABLE_REG_1_IR); + if (status != 0) + goto err; + + dev_dbg(dev, "IR enabled"); + + status = devm_rc_register_device(dev, cec->ir); + + if (status) { + dev_err(dev, "Failed to prepare input device"); + cec->ir = NULL; + goto err; + } + + return 0; + +err: + smb_rd16(SECOCEC_ENABLE_REG_1, &val); + + smb_wr16(SECOCEC_ENABLE_REG_1, + val & ~SECOCEC_ENABLE_REG_1_IR); + + dev_dbg(dev, "IR disabled"); + return status; +} + +static int secocec_ir_rx(struct secocec_data *priv) +{ + struct secocec_data *cec = priv; + struct device *dev = cec->dev; + u16 val, status, key, addr, toggle; + + if (!cec->ir) + return -ENODEV; + + status = smb_rd16(SECOCEC_IR_READ_DATA, &val); + if (status != 0) + goto err; + + key = val & SECOCEC_IR_COMMAND_MASK; + addr = (val & SECOCEC_IR_ADDRESS_MASK) >> SECOCEC_IR_ADDRESS_SHL; + toggle = (val & SECOCEC_IR_TOGGLE_MASK) >> SECOCEC_IR_TOGGLE_SHL; + + rc_keydown(cec->ir, RC_PROTO_RC5, RC_SCANCODE_RC5(addr, key), toggle); + + dev_dbg(dev, "IR key pressed: 0x%02x addr 0x%02x toggle 0x%02x", key, + addr, toggle); + + return 0; + +err: + dev_err(dev, "IR Receive message failed (%d)", status); + return -EIO; +} +#else +static void secocec_ir_rx(struct secocec_data *priv) +{ +} + +static int secocec_ir_probe(void *priv) +{ + return 0; +} +#endif + +static irqreturn_t secocec_irq_handler(int irq, void *priv) +{ + struct secocec_data *cec = priv; + struct device *dev = cec->dev; + u16 status_val, cec_val, val = 0; + int status; + + /* Read status register */ + status = smb_rd16(SECOCEC_STATUS_REG_1, &status_val); + if (status) + goto err; + + if (status_val & SECOCEC_STATUS_REG_1_CEC) { + /* Read CEC status register */ + status = smb_rd16(SECOCEC_STATUS, &cec_val); + if (status) + goto err; + + if (cec_val & SECOCEC_STATUS_MSG_RECEIVED_MASK) + secocec_rx_done(cec->cec_adap, cec_val); + + if (cec_val & SECOCEC_STATUS_MSG_SENT_MASK) + secocec_tx_done(cec->cec_adap, cec_val); + + if ((~cec_val & SECOCEC_STATUS_MSG_SENT_MASK) && + (~cec_val & SECOCEC_STATUS_MSG_RECEIVED_MASK)) + dev_warn_once(dev, + "Message not received or sent, but interrupt fired"); + + val = SECOCEC_STATUS_REG_1_CEC; + } + + if (status_val & SECOCEC_STATUS_REG_1_IR) { + val |= SECOCEC_STATUS_REG_1_IR; + + secocec_ir_rx(cec); + } + + /* Reset status register */ + status = smb_wr16(SECOCEC_STATUS_REG_1, val); + if (status) + goto err; + + return IRQ_HANDLED; + +err: + dev_err_once(dev, "IRQ: R/W SMBus operation failed (%d)", status); + + /* Reset status register */ + val = SECOCEC_STATUS_REG_1_CEC | SECOCEC_STATUS_REG_1_IR; + smb_wr16(SECOCEC_STATUS_REG_1, val); + + return IRQ_HANDLED; +} + +struct cec_dmi_match { + const char *sys_vendor; + const char *product_name; + const char *devname; + const char *conn; +}; + +static const struct cec_dmi_match secocec_dmi_match_table[] = { + /* UDOO X86 */ + { "SECO", "UDOO x86", "0000:00:02.0", "Port B" }, +}; + +static struct device *secocec_cec_find_hdmi_dev(struct device *dev, + const char **conn) +{ + int i; + + for (i = 0 ; i < ARRAY_SIZE(secocec_dmi_match_table) ; ++i) { + const struct cec_dmi_match *m = &secocec_dmi_match_table[i]; + + if (dmi_match(DMI_SYS_VENDOR, m->sys_vendor) && + dmi_match(DMI_PRODUCT_NAME, m->product_name)) { + struct device *d; + + /* Find the device, bail out if not yet registered */ + d = bus_find_device_by_name(&pci_bus_type, NULL, + m->devname); + if (!d) + return ERR_PTR(-EPROBE_DEFER); + + put_device(d); + *conn = m->conn; + return d; + } + } + + return ERR_PTR(-EINVAL); +} + +static int secocec_acpi_probe(struct secocec_data *sdev) +{ + struct device *dev = sdev->dev; + struct gpio_desc *gpio; + int irq = 0; + + gpio = devm_gpiod_get(dev, NULL, GPIOF_IN); + if (IS_ERR(gpio)) { + dev_err(dev, "Cannot request interrupt gpio"); + return PTR_ERR(gpio); + } + + irq = gpiod_to_irq(gpio); + if (irq < 0) { + dev_err(dev, "Cannot find valid irq"); + return -ENODEV; + } + dev_dbg(dev, "irq-gpio is bound to IRQ %d", irq); + + sdev->irq = irq; + + return 0; +} + +static int secocec_probe(struct platform_device *pdev) +{ + struct secocec_data *secocec; + struct device *dev = &pdev->dev; + struct device *hdmi_dev; + const char *conn = NULL; + int ret; + u16 val; + + hdmi_dev = secocec_cec_find_hdmi_dev(&pdev->dev, &conn); + if (IS_ERR(hdmi_dev)) + return PTR_ERR(hdmi_dev); + + secocec = devm_kzalloc(dev, sizeof(*secocec), GFP_KERNEL); + if (!secocec) + return -ENOMEM; + + dev_set_drvdata(dev, secocec); + + /* Request SMBus regions */ + if (!request_muxed_region(BRA_SMB_BASE_ADDR, 7, "CEC00001")) { + dev_err(dev, "Request memory region failed"); + return -ENXIO; + } + + secocec->pdev = pdev; + secocec->dev = dev; + + if (!has_acpi_companion(dev)) { + dev_dbg(dev, "Cannot find any ACPI companion"); + ret = -ENODEV; + goto err; + } + + ret = secocec_acpi_probe(secocec); + if (ret) { + dev_err(dev, "Cannot assign gpio to IRQ"); + ret = -ENODEV; + goto err; + } + + /* Firmware version check */ + ret = smb_rd16(SECOCEC_VERSION, &val); + if (ret) { + dev_err(dev, "Cannot check fw version"); + goto err; + } + if (val < SECOCEC_LATEST_FW) { + dev_err(dev, "CEC Firmware not supported (v.%04x). Use ver > v.%04x", + val, SECOCEC_LATEST_FW); + ret = -EINVAL; + goto err; + } + + ret = devm_request_threaded_irq(dev, + secocec->irq, + NULL, + secocec_irq_handler, + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + dev_name(&pdev->dev), secocec); + + if (ret) { + dev_err(dev, "Cannot request IRQ %d", secocec->irq); + ret = -EIO; + goto err; + } + + /* Allocate CEC adapter */ + secocec->cec_adap = cec_allocate_adapter(&secocec_cec_adap_ops, + secocec, + dev_name(dev), + CEC_CAP_DEFAULTS | + CEC_CAP_CONNECTOR_INFO, + SECOCEC_MAX_ADDRS); + + if (IS_ERR(secocec->cec_adap)) { + ret = PTR_ERR(secocec->cec_adap); + goto err; + } + + secocec->notifier = cec_notifier_cec_adap_register(hdmi_dev, conn, + secocec->cec_adap); + if (!secocec->notifier) { + ret = -ENOMEM; + goto err_delete_adapter; + } + + ret = cec_register_adapter(secocec->cec_adap, dev); + if (ret) + goto err_notifier; + + ret = secocec_ir_probe(secocec); + if (ret) + goto err_notifier; + + platform_set_drvdata(pdev, secocec); + + dev_dbg(dev, "Device registered"); + + return ret; + +err_notifier: + cec_notifier_cec_adap_unregister(secocec->notifier, secocec->cec_adap); +err_delete_adapter: + cec_delete_adapter(secocec->cec_adap); +err: + release_region(BRA_SMB_BASE_ADDR, 7); + dev_err(dev, "%s device probe failed\n", dev_name(dev)); + + return ret; +} + +static int secocec_remove(struct platform_device *pdev) +{ + struct secocec_data *secocec = platform_get_drvdata(pdev); + u16 val; + + if (secocec->ir) { + smb_rd16(SECOCEC_ENABLE_REG_1, &val); + + smb_wr16(SECOCEC_ENABLE_REG_1, val & ~SECOCEC_ENABLE_REG_1_IR); + + dev_dbg(&pdev->dev, "IR disabled"); + } + cec_notifier_cec_adap_unregister(secocec->notifier, secocec->cec_adap); + cec_unregister_adapter(secocec->cec_adap); + + release_region(BRA_SMB_BASE_ADDR, 7); + + dev_dbg(&pdev->dev, "CEC device removed"); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int secocec_suspend(struct device *dev) +{ + int status; + u16 val; + + dev_dbg(dev, "Device going to suspend, disabling"); + + /* Clear the status register */ + status = smb_rd16(SECOCEC_STATUS_REG_1, &val); + if (status) + goto err; + + status = smb_wr16(SECOCEC_STATUS_REG_1, val); + if (status) + goto err; + + /* Disable the interrupts */ + status = smb_rd16(SECOCEC_ENABLE_REG_1, &val); + if (status) + goto err; + + status = smb_wr16(SECOCEC_ENABLE_REG_1, val & + ~SECOCEC_ENABLE_REG_1_CEC & ~SECOCEC_ENABLE_REG_1_IR); + if (status) + goto err; + + return 0; + +err: + dev_err(dev, "Suspend failed (err: %d)", status); + return status; +} + +static int secocec_resume(struct device *dev) +{ + int status; + u16 val; + + dev_dbg(dev, "Resuming device from suspend"); + + /* Clear the status register */ + status = smb_rd16(SECOCEC_STATUS_REG_1, &val); + if (status) + goto err; + + status = smb_wr16(SECOCEC_STATUS_REG_1, val); + if (status) + goto err; + + /* Enable the interrupts */ + status = smb_rd16(SECOCEC_ENABLE_REG_1, &val); + if (status) + goto err; + + status = smb_wr16(SECOCEC_ENABLE_REG_1, val | SECOCEC_ENABLE_REG_1_CEC); + if (status) + goto err; + + dev_dbg(dev, "Device resumed from suspend"); + + return 0; + +err: + dev_err(dev, "Resume failed (err: %d)", status); + return status; +} + +static SIMPLE_DEV_PM_OPS(secocec_pm_ops, secocec_suspend, secocec_resume); +#define SECOCEC_PM_OPS (&secocec_pm_ops) +#else +#define SECOCEC_PM_OPS NULL +#endif + +#ifdef CONFIG_ACPI +static const struct acpi_device_id secocec_acpi_match[] = { + {"CEC00001", 0}, + {}, +}; + +MODULE_DEVICE_TABLE(acpi, secocec_acpi_match); +#endif + +static struct platform_driver secocec_driver = { + .driver = { + .name = SECOCEC_DEV_NAME, + .acpi_match_table = ACPI_PTR(secocec_acpi_match), + .pm = SECOCEC_PM_OPS, + }, + .probe = secocec_probe, + .remove = secocec_remove, +}; + +module_platform_driver(secocec_driver); + +MODULE_DESCRIPTION("SECO CEC X86 Driver"); +MODULE_AUTHOR("Ettore Chimenti <ek5.chimenti@gmail.com>"); +MODULE_LICENSE("Dual BSD/GPL"); |