diff options
Diffstat (limited to 'drivers/mfd/Kconfig')
| -rw-r--r-- | drivers/mfd/Kconfig | 95 |
1 files changed, 28 insertions, 67 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 30db49f31866..fcc141e067b9 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -15,6 +15,7 @@ config MFD_CS5535 tristate "AMD CS5535 and CS5536 southbridge core functions" select MFD_CORE depends on PCI && (X86_32 || (X86 && COMPILE_TEST)) + depends on !UML help This is the core driver for CS5535/CS5536 MFD functions. This is necessary for using the board's GPIO and MFGPT functionality. @@ -300,15 +301,6 @@ config MFD_CS47L92 help Support for Cirrus Logic CS42L92, CS47L92 and CS47L93 Smart Codecs -config MFD_ASIC3 - bool "Compaq ASIC3" - depends on GPIOLIB - depends on ARM || COMPILE_TEST - select MFD_CORE - help - This driver supports the ASIC3 multifunction chip found on many - PDAs (mainly iPAQ and HTC based ones) - config PMIC_DA903X bool "Dialog Semiconductor DA9030/DA9034 PMIC Support" depends on I2C=y @@ -550,15 +542,6 @@ config MFD_HI655X_PMIC help Select this option to enable Hisilicon hi655x series pmic driver. -config HTC_PASIC3 - tristate "HTC PASIC3 LED/DS1WM chip support" - select MFD_CORE - help - This core driver provides register access for the LED/DS1WM - chips labeled "AIC2" and "AIC3", found on HTC Blueangel and - HTC Magician devices, respectively. Actual functionality is - handled by the leds-pasic3 and ds1wm drivers. - config MFD_INTEL_QUARK_I2C_GPIO tristate "Intel Quark MFD I2C GPIO" depends on PCI @@ -702,7 +685,7 @@ config MFD_INTEL_PMC_BXT config MFD_IPAQ_MICRO bool "Atmel Micro ASIC (iPAQ h3100/h3600/h3700) Support" - depends on SA1100_H3100 || SA1100_H3600 + depends on SA1100_H3600 select MFD_CORE help Select this to get support for the Microcontroller found in @@ -1080,17 +1063,6 @@ config PCF50633_GPIO Say yes here if you want to include support GPIO for pins on the PCF50633 chip. -config UCB1400_CORE - tristate "Philips UCB1400 Core driver" - depends on AC97_BUS - depends on GPIOLIB - help - This enables support for the Philips UCB1400 core functions. - The UCB1400 is an AC97 audio codec. - - To compile this driver as a module, choose M here: the - module will be called ucb1400_core. - config MFD_PM8XXX tristate "Qualcomm PM8xxx PMIC chips driver" depends on (ARM || HEXAGON || COMPILE_TEST) @@ -1514,7 +1486,7 @@ config TPS6105X config TPS65010 tristate "TI TPS6501x Power Management chips" depends on I2C && GPIOLIB - default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK + default MACH_OMAP_OSK help If you say yes here you get support for the TPS6501x series of Power Management chips. These include voltage regulators, @@ -1795,35 +1767,6 @@ config MFD_TC3589X additional drivers must be enabled in order to use the functionality of the device. -config MFD_TMIO - bool - default n - -config MFD_T7L66XB - bool "Toshiba T7L66XB" - depends on ARM && HAVE_CLK - select MFD_CORE - select MFD_TMIO - help - Support for Toshiba Mobile IO Controller T7L66XB - -config MFD_TC6387XB - bool "Toshiba TC6387XB" - depends on ARM && HAVE_CLK - select MFD_CORE - select MFD_TMIO - help - Support for Toshiba Mobile IO Controller TC6387XB - -config MFD_TC6393XB - bool "Toshiba TC6393XB" - depends on ARM && HAVE_CLK - select GPIOLIB - select MFD_CORE - select MFD_TMIO - help - Support for Toshiba Mobile IO Controller TC6393XB - config MFD_TQMX86 tristate "TQ-Systems IO controller TQMX86" select MFD_CORE @@ -2224,14 +2167,32 @@ config SGI_MFD_IOC3 If you have an SGI Origin, Octane, or a PCI IOC3 card, then say Y. Otherwise say N. -config MFD_INTEL_M10_BMC - tristate "Intel MAX 10 Board Management Controller" - depends on SPI_MASTER - select REGMAP_SPI_AVMM - select MFD_CORE +config MFD_INTEL_M10_BMC_CORE + tristate + select MFD_CORE + select REGMAP + default n + +config MFD_INTEL_M10_BMC_SPI + tristate "Intel MAX 10 Board Management Controller with SPI" + depends on SPI_MASTER + select MFD_INTEL_M10_BMC_CORE + select REGMAP_SPI_AVMM + help + Support for the Intel MAX 10 board management controller using the + SPI interface. + + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the functionality + of the device. + +config MFD_INTEL_M10_BMC_PMCI + tristate "Intel MAX 10 Board Management Controller with PMCI" + depends on FPGA_DFL + select MFD_INTEL_M10_BMC_CORE + select REGMAP help - Support for the Intel MAX 10 board management controller using the - SPI interface. + Support for the Intel MAX 10 board management controller via PMCI. This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality |