aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/drivers/net/dsa/sja1105/sja1105_ptp.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/dsa/sja1105/sja1105_ptp.c')
-rw-r--r--drivers/net/dsa/sja1105/sja1105_ptp.c26
1 files changed, 18 insertions, 8 deletions
diff --git a/drivers/net/dsa/sja1105/sja1105_ptp.c b/drivers/net/dsa/sja1105/sja1105_ptp.c
index a22f8e3fc06b..bc0e47c1dbb9 100644
--- a/drivers/net/dsa/sja1105/sja1105_ptp.c
+++ b/drivers/net/dsa/sja1105/sja1105_ptp.c
@@ -16,14 +16,15 @@
/* PTPSYNCTS has no interrupt or update mechanism, because the intended
* hardware use case is for the timestamp to be collected synchronously,
- * immediately after the CAS_MASTER SJA1105 switch has triggered a CASSYNC
- * pulse on the PTP_CLK pin. When used as a generic extts source, it needs
- * polling and a comparison with the old value. The polling interval is just
- * the Nyquist rate of a canonical PPS input (e.g. from a GPS module).
- * Anything of higher frequency than 1 Hz will be lost, since there is no
- * timestamp FIFO.
+ * immediately after the CAS_MASTER SJA1105 switch has performed a CASSYNC
+ * one-shot toggle (no return to level) on the PTP_CLK pin. When used as a
+ * generic extts source, the PTPSYNCTS register needs polling and a comparison
+ * with the old value. The polling interval is configured as the Nyquist rate
+ * of a signal with 50% duty cycle and 1Hz frequency, which is sadly all that
+ * this hardware can do (but may be enough for some setups). Anything of higher
+ * frequency than 1 Hz will be lost, since there is no timestamp FIFO.
*/
-#define SJA1105_EXTTS_INTERVAL (HZ / 2)
+#define SJA1105_EXTTS_INTERVAL (HZ / 4)
/* This range is actually +/- SJA1105_MAX_ADJ_PPB
* divided by 1000 (ppb -> ppm) and with a 16-bit
@@ -754,7 +755,16 @@ static int sja1105_extts_enable(struct sja1105_private *priv,
return -EOPNOTSUPP;
/* Reject requests with unsupported flags */
- if (extts->flags)
+ if (extts->flags & ~(PTP_ENABLE_FEATURE |
+ PTP_RISING_EDGE |
+ PTP_FALLING_EDGE |
+ PTP_STRICT_FLAGS))
+ return -EOPNOTSUPP;
+
+ /* We can only enable time stamping on both edges, sadly. */
+ if ((extts->flags & PTP_STRICT_FLAGS) &&
+ (extts->flags & PTP_ENABLE_FEATURE) &&
+ (extts->flags & PTP_EXTTS_EDGES) != PTP_EXTTS_EDGES)
return -EOPNOTSUPP;
rc = sja1105_change_ptp_clk_pin_func(priv, PTP_PF_EXTTS);