diff options
Diffstat (limited to 'drivers/net/ethernet/chelsio/cxgb4/t4_hw.c')
-rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 112 |
1 files changed, 100 insertions, 12 deletions
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c index 2b03f6187a24..a3544041ad32 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -198,7 +198,7 @@ static void t4_report_fw_error(struct adapter *adap) if (pcie_fw & PCIE_FW_ERR_F) { dev_err(adap->pdev_dev, "Firmware reports adapter error: %s\n", reason[PCIE_FW_EVAL_G(pcie_fw)]); - adap->flags &= ~FW_OK; + adap->flags &= ~CXGB4_FW_OK; } } @@ -4105,6 +4105,9 @@ static inline fw_port_cap32_t cc_to_fwcap_fec(enum cc_fec cc_fec) * @mbox: the Firmware Mailbox to use * @port: the Port ID * @lc: the Port's Link Configuration + * @sleep_ok: if true we may sleep while awaiting command completion + * @timeout: time to wait for command to finish before timing out + * (negative implies @sleep_ok=false) * * Set up a port's MAC and PHY according to a desired link configuration. * - If the PHY can auto-negotiate first decide what to advertise, then @@ -4124,6 +4127,7 @@ int t4_link_l1cfg_core(struct adapter *adapter, unsigned int mbox, int ret; fw_mdi = (FW_PORT_CAP32_MDI_V(FW_PORT_CAP32_MDI_AUTO) & lc->pcaps); + /* Convert driver coding of Pause Frame Flow Control settings into the * Firmware's API. */ @@ -4143,8 +4147,13 @@ int t4_link_l1cfg_core(struct adapter *adapter, unsigned int mbox, fw_fec = cc_to_fwcap_fec(cc_fec); /* Figure out what our Requested Port Capabilities are going to be. + * Note parallel structure in t4_handle_get_port_info() and + * init_link_config(). */ if (!(lc->pcaps & FW_PORT_CAP32_ANEG)) { + if (lc->autoneg == AUTONEG_ENABLE) + return -EINVAL; + rcap = lc->acaps | fw_fc | fw_fec; lc->fc = lc->requested_fc & ~PAUSE_AUTONEG; lc->fec = cc_fec; @@ -4156,7 +4165,11 @@ int t4_link_l1cfg_core(struct adapter *adapter, unsigned int mbox, rcap = lc->acaps | fw_fc | fw_fec | fw_mdi; } - /* Note that older Firmware doesn't have FW_PORT_CAP32_FORCE_PAUSE, so + /* Some Requested Port Capabilities are trivially wrong if they exceed + * the Physical Port Capabilities. We can check that here and provide + * moderately useful feedback in the system log. + * + * Note that older Firmware doesn't have FW_PORT_CAP32_FORCE_PAUSE, so * we need to exclude this from this check in order to maintain * compatibility ... */ @@ -4185,6 +4198,13 @@ int t4_link_l1cfg_core(struct adapter *adapter, unsigned int mbox, ret = t4_wr_mbox_meat_timeout(adapter, mbox, &cmd, sizeof(cmd), NULL, sleep_ok, timeout); + + /* Unfortunately, even if the Requested Port Capabilities "fit" within + * the Physical Port Capabilities, some combinations of features may + * still not be leagal. For example, 40Gb/s and Reed-Solomon Forward + * Error Correction. So if the Firmware rejects the L1 Configure + * request, flag that here. + */ if (ret) { dev_err(adapter->pdev_dev, "Requested Port Capabilities %#x rejected, error %d\n", @@ -4942,7 +4962,13 @@ static void pl_intr_handler(struct adapter *adap) */ int t4_slow_intr_handler(struct adapter *adapter) { - u32 cause = t4_read_reg(adapter, PL_INT_CAUSE_A); + /* There are rare cases where a PL_INT_CAUSE bit may end up getting + * set when the corresponding PL_INT_ENABLE bit isn't set. It's + * easiest just to mask that case here. + */ + u32 raw_cause = t4_read_reg(adapter, PL_INT_CAUSE_A); + u32 enable = t4_read_reg(adapter, PL_INT_ENABLE_A); + u32 cause = raw_cause & enable; if (!(cause & GLBL_INTR_MASK)) return 0; @@ -4994,7 +5020,7 @@ int t4_slow_intr_handler(struct adapter *adapter) ulptx_intr_handler(adapter); /* Clear the interrupts just processed for which we are the master. */ - t4_write_reg(adapter, PL_INT_CAUSE_A, cause & GLBL_INTR_MASK); + t4_write_reg(adapter, PL_INT_CAUSE_A, raw_cause & GLBL_INTR_MASK); (void)t4_read_reg(adapter, PL_INT_CAUSE_A); /* flush */ return 1; } @@ -5217,7 +5243,7 @@ int t4_read_rss(struct adapter *adapter, u16 *map) static unsigned int t4_use_ldst(struct adapter *adap) { - return (adap->flags & FW_OK) && !adap->use_bd; + return (adap->flags & CXGB4_FW_OK) && !adap->use_bd; } /** @@ -6106,7 +6132,7 @@ unsigned int t4_get_mps_bg_map(struct adapter *adapter, int pidx) * ( MPSBGMAP[Port 1] << 8 ) | * ( MPSBGMAP[Port 0] << 0 )) */ - if (adapter->flags & FW_OK) { + if (adapter->flags & CXGB4_FW_OK) { u32 param, val; int ret; @@ -6693,6 +6719,47 @@ int t4_sge_ctxt_flush(struct adapter *adap, unsigned int mbox, int ctxt_type) } /** + * t4_read_sge_dbqtimers - reag SGE Doorbell Queue Timer values + * @adap - the adapter + * @ndbqtimers: size of the provided SGE Doorbell Queue Timer table + * @dbqtimers: SGE Doorbell Queue Timer table + * + * Reads the SGE Doorbell Queue Timer values into the provided table. + * Returns 0 on success (Firmware and Hardware support this feature), + * an error on failure. + */ +int t4_read_sge_dbqtimers(struct adapter *adap, unsigned int ndbqtimers, + u16 *dbqtimers) +{ + int ret, dbqtimerix; + + ret = 0; + dbqtimerix = 0; + while (dbqtimerix < ndbqtimers) { + int nparams, param; + u32 params[7], vals[7]; + + nparams = ndbqtimers - dbqtimerix; + if (nparams > ARRAY_SIZE(params)) + nparams = ARRAY_SIZE(params); + + for (param = 0; param < nparams; param++) + params[param] = + (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) | + FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_DBQ_TIMER) | + FW_PARAMS_PARAM_Y_V(dbqtimerix + param)); + ret = t4_query_params(adap, adap->mbox, adap->pf, 0, + nparams, params, vals); + if (ret) + break; + + for (param = 0; param < nparams; param++) + dbqtimers[dbqtimerix++] = vals[param]; + } + return ret; +} + +/** * t4_fw_hello - establish communication with FW * @adap: the adapter * @mbox: mailbox to use for the FW command @@ -7026,10 +7093,10 @@ int t4_fw_upgrade(struct adapter *adap, unsigned int mbox, if (!t4_fw_matches_chip(adap, fw_hdr)) return -EINVAL; - /* Disable FW_OK flag so that mbox commands with FW_OK flag set - * wont be sent when we are flashing FW. + /* Disable CXGB4_FW_OK flag so that mbox commands with CXGB4_FW_OK flag + * set wont be sent when we are flashing FW. */ - adap->flags &= ~FW_OK; + adap->flags &= ~CXGB4_FW_OK; ret = t4_fw_halt(adap, mbox, force); if (ret < 0 && !force) @@ -7068,7 +7135,7 @@ int t4_fw_upgrade(struct adapter *adap, unsigned int mbox, */ (void)t4_init_devlog_params(adap); out: - adap->flags |= FW_OK; + adap->flags |= CXGB4_FW_OK; return ret; } @@ -8461,6 +8528,10 @@ void t4_handle_get_port_info(struct port_info *pi, const __be64 *rpl) fc = fwcap_to_cc_pause(linkattr); speed = fwcap_to_speed(linkattr); + /* Reset state for communicating new Transceiver Module status and + * whether the OS-dependent layer wants us to redo the current + * "sticky" L1 Configure Link Parameters. + */ lc->new_module = false; lc->redo_l1cfg = false; @@ -8497,9 +8568,15 @@ void t4_handle_get_port_info(struct port_info *pi, const __be64 *rpl) */ pi->port_type = port_type; + /* Record new Module Type information. + */ pi->mod_type = mod_type; + /* Let the OS-dependent layer know if we have a new + * Transceiver Module inserted. + */ lc->new_module = t4_is_inserted_mod_type(mod_type); + t4_os_portmod_changed(adapter, pi->port_id); } @@ -8507,8 +8584,10 @@ void t4_handle_get_port_info(struct port_info *pi, const __be64 *rpl) fc != lc->fc || fec != lc->fec) { /* something changed */ if (!link_ok && lc->link_ok) { lc->link_down_rc = linkdnrc; - dev_warn(adapter->pdev_dev, "Port %d link down, reason: %s\n", - pi->tx_chan, t4_link_down_rc_str(linkdnrc)); + dev_warn_ratelimited(adapter->pdev_dev, + "Port %d link down, reason: %s\n", + pi->tx_chan, + t4_link_down_rc_str(linkdnrc)); } lc->link_ok = link_ok; lc->speed = speed; @@ -8518,6 +8597,11 @@ void t4_handle_get_port_info(struct port_info *pi, const __be64 *rpl) lc->lpacaps = lpacaps; lc->acaps = acaps & ADVERT_MASK; + /* If we're not physically capable of Auto-Negotiation, note + * this as Auto-Negotiation disabled. Otherwise, we track + * what Auto-Negotiation settings we have. Note parallel + * structure in t4_link_l1cfg_core() and init_link_config(). + */ if (!(lc->acaps & FW_PORT_CAP32_ANEG)) { lc->autoneg = AUTONEG_DISABLE; } else if (lc->acaps & FW_PORT_CAP32_ANEG) { @@ -8535,6 +8619,10 @@ void t4_handle_get_port_info(struct port_info *pi, const __be64 *rpl) t4_os_link_changed(adapter, pi->port_id, link_ok); } + /* If we have a new Transceiver Module and the OS-dependent code has + * told us that it wants us to redo whatever "sticky" L1 Configuration + * Link Parameters are set, do that now. + */ if (lc->new_module && lc->redo_l1cfg) { struct link_config old_lc; int ret; |