diff options
Diffstat (limited to 'drivers/net/phy/micrel.c')
-rw-r--r-- | drivers/net/phy/micrel.c | 82 |
1 files changed, 54 insertions, 28 deletions
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 6a5fd18f062c..fdb43dd9b5cd 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -20,6 +20,7 @@ * ksz8081, ksz8091, * ksz8061, * Switch : ksz8873, ksz886x + * ksz9477 */ #include <linux/kernel.h> @@ -268,23 +269,12 @@ out: return ret; } -static int kszphy_config_init(struct phy_device *phydev) +/* Some config bits need to be set again on resume, handle them here. */ +static int kszphy_config_reset(struct phy_device *phydev) { struct kszphy_priv *priv = phydev->priv; - const struct kszphy_type *type; int ret; - if (!priv) - return 0; - - type = priv->type; - - if (type->has_broadcast_disable) - kszphy_broadcast_disable(phydev); - - if (type->has_nand_tree_disable) - kszphy_nand_tree_disable(phydev); - if (priv->rmii_ref_clk_sel) { ret = kszphy_rmii_clk_sel(phydev, priv->rmii_ref_clk_sel_val); if (ret) { @@ -295,11 +285,30 @@ static int kszphy_config_init(struct phy_device *phydev) } if (priv->led_mode >= 0) - kszphy_setup_led(phydev, type->led_mode_reg, priv->led_mode); + kszphy_setup_led(phydev, priv->type->led_mode_reg, priv->led_mode); return 0; } +static int kszphy_config_init(struct phy_device *phydev) +{ + struct kszphy_priv *priv = phydev->priv; + const struct kszphy_type *type; + + if (!priv) + return 0; + + type = priv->type; + + if (type->has_broadcast_disable) + kszphy_broadcast_disable(phydev); + + if (type->has_nand_tree_disable) + kszphy_nand_tree_disable(phydev); + + return kszphy_config_reset(phydev); +} + static int ksz8041_config_init(struct phy_device *phydev) { struct device_node *of_node = phydev->mdio.dev.of_node; @@ -611,6 +620,8 @@ static int ksz9031_read_status(struct phy_device *phydev) if ((regval & 0xFF) == 0xFF) { phy_init_hw(phydev); phydev->link = 0; + if (phydev->drv->config_intr && phy_interrupt_is_valid(phydev)) + phydev->drv->config_intr(phydev); } return 0; @@ -700,8 +711,14 @@ static int kszphy_suspend(struct phy_device *phydev) static int kszphy_resume(struct phy_device *phydev) { + int ret; + genphy_resume(phydev); + ret = kszphy_config_reset(phydev); + if (ret) + return ret; + /* Enable PHY Interrupts */ if (phy_interrupt_is_valid(phydev)) { phydev->interrupts = PHY_INTERRUPT_ENABLED; @@ -779,7 +796,7 @@ static struct phy_driver ksphy_driver[] = { .phy_id_mask = MICREL_PHY_ID_MASK, .name = "Micrel KS8737", .features = PHY_BASIC_FEATURES, - .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .flags = PHY_HAS_INTERRUPT, .driver_data = &ks8737_type, .config_init = kszphy_config_init, .config_aneg = genphy_config_aneg, @@ -793,7 +810,7 @@ static struct phy_driver ksphy_driver[] = { .phy_id_mask = 0x00ffffff, .name = "Micrel KSZ8021 or KSZ8031", .features = PHY_BASIC_FEATURES, - .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .flags = PHY_HAS_INTERRUPT, .driver_data = &ksz8021_type, .probe = kszphy_probe, .config_init = kszphy_config_init, @@ -811,7 +828,7 @@ static struct phy_driver ksphy_driver[] = { .phy_id_mask = 0x00ffffff, .name = "Micrel KSZ8031", .features = PHY_BASIC_FEATURES, - .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .flags = PHY_HAS_INTERRUPT, .driver_data = &ksz8021_type, .probe = kszphy_probe, .config_init = kszphy_config_init, @@ -829,7 +846,7 @@ static struct phy_driver ksphy_driver[] = { .phy_id_mask = MICREL_PHY_ID_MASK, .name = "Micrel KSZ8041", .features = PHY_BASIC_FEATURES, - .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .flags = PHY_HAS_INTERRUPT, .driver_data = &ksz8041_type, .probe = kszphy_probe, .config_init = ksz8041_config_init, @@ -847,7 +864,7 @@ static struct phy_driver ksphy_driver[] = { .phy_id_mask = MICREL_PHY_ID_MASK, .name = "Micrel KSZ8041RNLI", .features = PHY_BASIC_FEATURES, - .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .flags = PHY_HAS_INTERRUPT, .driver_data = &ksz8041_type, .probe = kszphy_probe, .config_init = kszphy_config_init, @@ -865,7 +882,7 @@ static struct phy_driver ksphy_driver[] = { .phy_id_mask = MICREL_PHY_ID_MASK, .name = "Micrel KSZ8051", .features = PHY_BASIC_FEATURES, - .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .flags = PHY_HAS_INTERRUPT, .driver_data = &ksz8051_type, .probe = kszphy_probe, .config_init = kszphy_config_init, @@ -883,7 +900,7 @@ static struct phy_driver ksphy_driver[] = { .name = "Micrel KSZ8001 or KS8721", .phy_id_mask = 0x00fffffc, .features = PHY_BASIC_FEATURES, - .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .flags = PHY_HAS_INTERRUPT, .driver_data = &ksz8041_type, .probe = kszphy_probe, .config_init = kszphy_config_init, @@ -901,7 +918,7 @@ static struct phy_driver ksphy_driver[] = { .name = "Micrel KSZ8081 or KSZ8091", .phy_id_mask = MICREL_PHY_ID_MASK, .features = PHY_BASIC_FEATURES, - .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .flags = PHY_HAS_INTERRUPT, .driver_data = &ksz8081_type, .probe = kszphy_probe, .config_init = kszphy_config_init, @@ -919,7 +936,7 @@ static struct phy_driver ksphy_driver[] = { .name = "Micrel KSZ8061", .phy_id_mask = MICREL_PHY_ID_MASK, .features = PHY_BASIC_FEATURES, - .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .flags = PHY_HAS_INTERRUPT, .config_init = kszphy_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, @@ -932,7 +949,7 @@ static struct phy_driver ksphy_driver[] = { .phy_id_mask = 0x000ffffe, .name = "Micrel KSZ9021 Gigabit PHY", .features = PHY_GBIT_FEATURES, - .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .flags = PHY_HAS_INTERRUPT, .driver_data = &ksz9021_type, .probe = kszphy_probe, .config_init = ksz9021_config_init, @@ -952,7 +969,7 @@ static struct phy_driver ksphy_driver[] = { .phy_id_mask = MICREL_PHY_ID_MASK, .name = "Micrel KSZ9031 Gigabit PHY", .features = PHY_GBIT_FEATURES, - .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .flags = PHY_HAS_INTERRUPT, .driver_data = &ksz9021_type, .probe = kszphy_probe, .config_init = ksz9031_config_init, @@ -969,7 +986,6 @@ static struct phy_driver ksphy_driver[] = { .phy_id = PHY_ID_KSZ8873MLL, .phy_id_mask = MICREL_PHY_ID_MASK, .name = "Micrel KSZ8873MLL Switch", - .flags = PHY_HAS_MAGICANEG, .config_init = kszphy_config_init, .config_aneg = ksz8873mll_config_aneg, .read_status = ksz8873mll_read_status, @@ -980,7 +996,7 @@ static struct phy_driver ksphy_driver[] = { .phy_id_mask = MICREL_PHY_ID_MASK, .name = "Micrel KSZ886X Switch", .features = PHY_BASIC_FEATURES, - .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .flags = PHY_HAS_INTERRUPT, .config_init = kszphy_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, @@ -991,12 +1007,22 @@ static struct phy_driver ksphy_driver[] = { .phy_id_mask = MICREL_PHY_ID_MASK, .name = "Micrel KSZ8795", .features = PHY_BASIC_FEATURES, - .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .flags = PHY_HAS_INTERRUPT, .config_init = kszphy_config_init, .config_aneg = ksz8873mll_config_aneg, .read_status = ksz8873mll_read_status, .suspend = genphy_suspend, .resume = genphy_resume, +}, { + .phy_id = PHY_ID_KSZ9477, + .phy_id_mask = MICREL_PHY_ID_MASK, + .name = "Microchip KSZ9477", + .features = PHY_GBIT_FEATURES, + .config_init = kszphy_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .suspend = genphy_suspend, + .resume = genphy_resume, } }; module_phy_driver(ksphy_driver); |