diff options
Diffstat (limited to 'drivers/net/phy')
-rw-r--r-- | drivers/net/phy/dp83867.c | 2 | ||||
-rw-r--r-- | drivers/net/phy/dp83869.c | 5 | ||||
-rw-r--r-- | drivers/net/phy/fixed_phy.c | 28 | ||||
-rw-r--r-- | drivers/net/phy/marvell.c | 2 | ||||
-rw-r--r-- | drivers/net/phy/mdio_bus.c | 2 | ||||
-rw-r--r-- | drivers/net/phy/mscc/mscc.h | 2 | ||||
-rw-r--r-- | drivers/net/phy/mscc/mscc_main.c | 8 |
7 files changed, 24 insertions, 25 deletions
diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c index 4017ae1692d8..f3c04981b8da 100644 --- a/drivers/net/phy/dp83867.c +++ b/drivers/net/phy/dp83867.c @@ -488,7 +488,7 @@ static int dp83867_verify_rgmii_cfg(struct phy_device *phydev) return 0; } -#ifdef CONFIG_OF_MDIO +#if IS_ENABLED(CONFIG_OF_MDIO) static int dp83867_of_init(struct phy_device *phydev) { struct dp83867_private *dp83867 = phydev->priv; diff --git a/drivers/net/phy/dp83869.c b/drivers/net/phy/dp83869.c index cfb22a21a2e6..53ed3abc26c9 100644 --- a/drivers/net/phy/dp83869.c +++ b/drivers/net/phy/dp83869.c @@ -176,7 +176,7 @@ static int dp83869_set_strapped_mode(struct phy_device *phydev) return 0; } -#ifdef CONFIG_OF_MDIO +#if IS_ENABLED(CONFIG_OF_MDIO) static int dp83869_of_init(struct phy_device *phydev) { struct dp83869_private *dp83869 = phydev->priv; @@ -218,10 +218,13 @@ static int dp83869_of_init(struct phy_device *phydev) ret = phy_read_mmd(phydev, DP83869_DEVADDR, DP83869_STRAP_STS1); if (ret < 0) return ret; + if (ret & DP83869_STRAP_MIRROR_ENABLED) dp83869->port_mirroring = DP83869_PORT_MIRRORING_EN; else dp83869->port_mirroring = DP83869_PORT_MIRRORING_DIS; + + ret = 0; } if (of_property_read_u32(of_node, "rx-fifo-depth", diff --git a/drivers/net/phy/fixed_phy.c b/drivers/net/phy/fixed_phy.c index 4a3d34f40cb9..c4641b1704d6 100644 --- a/drivers/net/phy/fixed_phy.c +++ b/drivers/net/phy/fixed_phy.c @@ -19,7 +19,6 @@ #include <linux/slab.h> #include <linux/of.h> #include <linux/gpio/consumer.h> -#include <linux/seqlock.h> #include <linux/idr.h> #include <linux/netdevice.h> #include <linux/linkmode.h> @@ -34,7 +33,6 @@ struct fixed_mdio_bus { struct fixed_phy { int addr; struct phy_device *phydev; - seqcount_t seqcount; struct fixed_phy_status status; bool no_carrier; int (*link_update)(struct net_device *, struct fixed_phy_status *); @@ -80,19 +78,17 @@ static int fixed_mdio_read(struct mii_bus *bus, int phy_addr, int reg_num) list_for_each_entry(fp, &fmb->phys, node) { if (fp->addr == phy_addr) { struct fixed_phy_status state; - int s; - - do { - s = read_seqcount_begin(&fp->seqcount); - fp->status.link = !fp->no_carrier; - /* Issue callback if user registered it. */ - if (fp->link_update) - fp->link_update(fp->phydev->attached_dev, - &fp->status); - /* Check the GPIO for change in status */ - fixed_phy_update(fp); - state = fp->status; - } while (read_seqcount_retry(&fp->seqcount, s)); + + fp->status.link = !fp->no_carrier; + + /* Issue callback if user registered it. */ + if (fp->link_update) + fp->link_update(fp->phydev->attached_dev, + &fp->status); + + /* Check the GPIO for change in status */ + fixed_phy_update(fp); + state = fp->status; return swphy_read_reg(reg_num, &state); } @@ -150,8 +146,6 @@ static int fixed_phy_add_gpiod(unsigned int irq, int phy_addr, if (!fp) return -ENOMEM; - seqcount_init(&fp->seqcount); - if (irq != PHY_POLL) fmb->mii_bus->irq[phy_addr] = irq; diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 4ea226566cec..c9ecf3c8c3fd 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -429,7 +429,7 @@ static int m88e1101_config_aneg(struct phy_device *phydev) return marvell_config_aneg(phydev); } -#ifdef CONFIG_OF_MDIO +#if IS_ENABLED(CONFIG_OF_MDIO) /* Set and/or override some configuration registers based on the * marvell,reg-init property stored in the of_node for the phydev. * diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 255fdfcc13a6..6ceee82b2839 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -764,6 +764,7 @@ EXPORT_SYMBOL(mdiobus_scan); static void mdiobus_stats_acct(struct mdio_bus_stats *stats, bool op, int ret) { + preempt_disable(); u64_stats_update_begin(&stats->syncp); u64_stats_inc(&stats->transfers); @@ -778,6 +779,7 @@ static void mdiobus_stats_acct(struct mdio_bus_stats *stats, bool op, int ret) u64_stats_inc(&stats->writes); out: u64_stats_update_end(&stats->syncp); + preempt_enable(); } /** diff --git a/drivers/net/phy/mscc/mscc.h b/drivers/net/phy/mscc/mscc.h index f828c917b9f7..fbcee5fce7b2 100644 --- a/drivers/net/phy/mscc/mscc.h +++ b/drivers/net/phy/mscc/mscc.h @@ -374,7 +374,7 @@ struct vsc8531_private { #endif }; -#ifdef CONFIG_OF_MDIO +#if IS_ENABLED(CONFIG_OF_MDIO) struct vsc8531_edge_rate_table { u32 vddmac; u32 slowdown[8]; diff --git a/drivers/net/phy/mscc/mscc_main.c b/drivers/net/phy/mscc/mscc_main.c index 7ed0285206d0..5ddc44f87eaf 100644 --- a/drivers/net/phy/mscc/mscc_main.c +++ b/drivers/net/phy/mscc/mscc_main.c @@ -98,7 +98,7 @@ static const struct vsc85xx_hw_stat vsc8584_hw_stats[] = { }, }; -#ifdef CONFIG_OF_MDIO +#if IS_ENABLED(CONFIG_OF_MDIO) static const struct vsc8531_edge_rate_table edge_table[] = { {MSCC_VDDMAC_3300, { 0, 2, 4, 7, 10, 17, 29, 53} }, {MSCC_VDDMAC_2500, { 0, 3, 6, 10, 14, 23, 37, 63} }, @@ -382,7 +382,7 @@ out_unlock: mutex_unlock(&phydev->lock); } -#ifdef CONFIG_OF_MDIO +#if IS_ENABLED(CONFIG_OF_MDIO) static int vsc85xx_edge_rate_magic_get(struct phy_device *phydev) { u32 vdd, sd; @@ -1396,7 +1396,7 @@ static int vsc8584_config_init(struct phy_device *phydev) /* Disable SerDes for 100Base-FX */ ret = vsc8584_cmd(phydev, PROC_CMD_FIBER_MEDIA_CONF | - PROC_CMD_FIBER_PORT(vsc8531->base_addr) | + PROC_CMD_FIBER_PORT(vsc8531->addr) | PROC_CMD_FIBER_DISABLE | PROC_CMD_READ_MOD_WRITE_PORT | PROC_CMD_RST_CONF_PORT | PROC_CMD_FIBER_100BASE_FX); @@ -1405,7 +1405,7 @@ static int vsc8584_config_init(struct phy_device *phydev) /* Disable SerDes for 1000Base-X */ ret = vsc8584_cmd(phydev, PROC_CMD_FIBER_MEDIA_CONF | - PROC_CMD_FIBER_PORT(vsc8531->base_addr) | + PROC_CMD_FIBER_PORT(vsc8531->addr) | PROC_CMD_FIBER_DISABLE | PROC_CMD_READ_MOD_WRITE_PORT | PROC_CMD_RST_CONF_PORT | PROC_CMD_FIBER_1000BASE_X); |