diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/dvm/rx.c (renamed from drivers/net/wireless/iwlwifi/iwl-agn-rx.c) | 78 |
1 files changed, 27 insertions, 51 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rx.c b/drivers/net/wireless/iwlwifi/dvm/rx.c index 403de96f9747..fee5cffa1669 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rx.c +++ b/drivers/net/wireless/iwlwifi/dvm/rx.c @@ -32,12 +32,10 @@ #include <linux/sched.h> #include <net/mac80211.h> #include <asm/unaligned.h> -#include "iwl-eeprom.h" -#include "iwl-dev.h" #include "iwl-io.h" -#include "iwl-agn-calib.h" -#include "iwl-agn.h" -#include "iwl-modparams.h" +#include "dev.h" +#include "calib.h" +#include "agn.h" #define IWL_CMD_ENTRY(x) [x] = #x @@ -90,7 +88,6 @@ const char *iwl_dvm_cmd_strings[REPLY_MAX] = { IWL_CMD_ENTRY(REPLY_PHY_CALIBRATION_CMD), IWL_CMD_ENTRY(REPLY_RX_PHY_CMD), IWL_CMD_ENTRY(REPLY_RX_MPDU_CMD), - IWL_CMD_ENTRY(REPLY_RX), IWL_CMD_ENTRY(REPLY_COMPRESSED_BA), IWL_CMD_ENTRY(CALIBRATION_CFG_CMD), IWL_CMD_ENTRY(CALIBRATION_RES_NOTIFICATION), @@ -897,8 +894,7 @@ static int iwlagn_calc_rssi(struct iwl_priv *priv, return max_rssi - agc - IWLAGN_RSSI_OFFSET; } -/* Called for REPLY_RX (legacy ABG frames), or - * REPLY_RX_MPDU_CMD (HT high-throughput N frames). */ +/* Called for REPLY_RX_MPDU_CMD */ static int iwlagn_rx_reply_rx(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb, struct iwl_device_cmd *cmd) @@ -913,37 +909,17 @@ static int iwlagn_rx_reply_rx(struct iwl_priv *priv, u32 ampdu_status; u32 rate_n_flags; - /** - * REPLY_RX and REPLY_RX_MPDU_CMD are handled differently. - * REPLY_RX: physical layer info is in this buffer - * REPLY_RX_MPDU_CMD: physical layer info was sent in separate - * command and cached in priv->last_phy_res - * - * Here we set up local variables depending on which command is - * received. - */ - if (pkt->hdr.cmd == REPLY_RX) { - phy_res = (struct iwl_rx_phy_res *)pkt->data; - header = (struct ieee80211_hdr *)(pkt->data + sizeof(*phy_res) - + phy_res->cfg_phy_cnt); - - len = le16_to_cpu(phy_res->byte_count); - rx_pkt_status = *(__le32 *)(pkt->data + sizeof(*phy_res) + - phy_res->cfg_phy_cnt + len); - ampdu_status = le32_to_cpu(rx_pkt_status); - } else { - if (!priv->last_phy_res_valid) { - IWL_ERR(priv, "MPDU frame without cached PHY data\n"); - return 0; - } - phy_res = &priv->last_phy_res; - amsdu = (struct iwl_rx_mpdu_res_start *)pkt->data; - header = (struct ieee80211_hdr *)(pkt->data + sizeof(*amsdu)); - len = le16_to_cpu(amsdu->byte_count); - rx_pkt_status = *(__le32 *)(pkt->data + sizeof(*amsdu) + len); - ampdu_status = iwlagn_translate_rx_status(priv, - le32_to_cpu(rx_pkt_status)); + if (!priv->last_phy_res_valid) { + IWL_ERR(priv, "MPDU frame without cached PHY data\n"); + return 0; } + phy_res = &priv->last_phy_res; + amsdu = (struct iwl_rx_mpdu_res_start *)pkt->data; + header = (struct ieee80211_hdr *)(pkt->data + sizeof(*amsdu)); + len = le16_to_cpu(amsdu->byte_count); + rx_pkt_status = *(__le32 *)(pkt->data + sizeof(*amsdu) + len); + ampdu_status = iwlagn_translate_rx_status(priv, + le32_to_cpu(rx_pkt_status)); if ((unlikely(phy_res->cfg_phy_cnt > 20))) { IWL_DEBUG_DROP(priv, "dsp size out of range [0,20]: %d\n", @@ -1012,6 +988,8 @@ static int iwlagn_rx_reply_rx(struct iwl_priv *priv, rx_status.flag |= RX_FLAG_40MHZ; if (rate_n_flags & RATE_MCS_SGI_MSK) rx_status.flag |= RX_FLAG_SHORT_GI; + if (rate_n_flags & RATE_MCS_GF_MSK) + rx_status.flag |= RX_FLAG_HT_GF; iwlagn_pass_packet_to_mac80211(priv, header, len, ampdu_status, rxb, &rx_status); @@ -1124,8 +1102,6 @@ int iwl_rx_dispatch(struct iwl_op_mode *op_mode, struct iwl_rx_cmd_buffer *rxb, { struct iwl_rx_packet *pkt = rxb_addr(rxb); struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode); - void (*pre_rx_handler)(struct iwl_priv *, - struct iwl_rx_cmd_buffer *); int err = 0; /* @@ -1135,19 +1111,19 @@ int iwl_rx_dispatch(struct iwl_op_mode *op_mode, struct iwl_rx_cmd_buffer *rxb, */ iwl_notification_wait_notify(&priv->notif_wait, pkt); - /* RX data may be forwarded to userspace (using pre_rx_handler) in one - * of two cases: the first, that the user owns the uCode through - * testmode - in such case the pre_rx_handler is set and no further - * processing takes place. The other case is when the user want to - * monitor the rx w/o affecting the regular flow - the pre_rx_handler - * will be set but the ownership flag != IWL_OWNERSHIP_TM and the flow +#ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE + /* + * RX data may be forwarded to userspace in one + * of two cases: the user owns the fw through testmode or when + * the user requested to monitor the rx w/o affecting the regular flow. + * In these cases the iwl_test object will handle forwarding the rx + * data to user space. + * Note that if the ownership flag != IWL_OWNERSHIP_TM the flow * continues. - * We need to use ACCESS_ONCE to prevent a case where the handler - * changes between the check and the call. */ - pre_rx_handler = ACCESS_ONCE(priv->pre_rx_handler); - if (pre_rx_handler) - pre_rx_handler(priv, rxb); + iwl_test_rx(&priv->tst, rxb); +#endif + if (priv->ucode_owner != IWL_OWNERSHIP_TM) { /* Based on type of command response or notification, * handle those that need handling via function in |