diff options
Diffstat (limited to 'drivers/platform/x86/x86-android-tablets/lenovo.c')
| -rw-r--r-- | drivers/platform/x86/x86-android-tablets/lenovo.c | 22 |
1 files changed, 11 insertions, 11 deletions
diff --git a/drivers/platform/x86/x86-android-tablets/lenovo.c b/drivers/platform/x86/x86-android-tablets/lenovo.c index 74f39b658d2c..ae087f1471c1 100644 --- a/drivers/platform/x86/x86-android-tablets/lenovo.c +++ b/drivers/platform/x86/x86-android-tablets/lenovo.c @@ -59,7 +59,7 @@ static struct lp855x_platform_data lenovo_lp8557_reg_only_pdata = { .initial_brightness = 128, }; -/* Lenovo Yoga Book X90F / X90L's Android factory img has everything hardcoded */ +/* Lenovo Yoga Book X90F / X90L's Android factory image has everything hardcoded */ static const struct property_entry lenovo_yb1_x90_wacom_props[] = { PROPERTY_ENTRY_U32("hid-descr-addr", 0x0001), @@ -262,7 +262,7 @@ const struct x86_dev_info lenovo_yogabook_x90_info __initconst = { .init = lenovo_yb1_x90_init, }; -/* Lenovo Yoga Book X91F/L Windows tablet needs manual instantiation of the fg client */ +/* Lenovo Yoga Book X91F/L Windows tablet needs manual instantiation of the fuel-gauge client */ static const struct x86_i2c_client_info lenovo_yogabook_x91_i2c_clients[] __initconst = { { /* BQ27542 fuel-gauge */ @@ -281,7 +281,7 @@ const struct x86_dev_info lenovo_yogabook_x91_info __initconst = { .i2c_client_count = ARRAY_SIZE(lenovo_yogabook_x91_i2c_clients), }; -/* Lenovo Yoga Tablet 2 1050F/L's Android factory img has everything hardcoded */ +/* Lenovo Yoga Tablet 2 1050F/L's Android factory image has everything hardcoded */ static const struct property_entry lenovo_yoga_tab2_830_1050_bq24190_props[] = { PROPERTY_ENTRY_STRING_ARRAY_LEN("supplied-from", tusb1211_chg_det_psy, 1), PROPERTY_ENTRY_REF("monitored-battery", &generic_lipo_hv_4v35_battery_node), @@ -521,9 +521,9 @@ err_put_device: } /* - * These tablet's DSDT does not set acpi_gbl_reduced_hardware, so acpi_power_off + * These tablet's DSDT does not set acpi_gbl_reduced_hardware, so acpi_power_off() * gets used as pm_power_off handler. This causes "poweroff" on these tablets - * to hang hard. Requiring pressing the powerbutton for 30 seconds *twice* + * to hang hard. Requiring pressing the power button for 30 seconds *twice* * followed by a normal 3 second press to recover. Avoid this by doing an EFI * poweroff instead. */ @@ -546,7 +546,7 @@ static int __init lenovo_yoga_tab2_830_1050_init(struct device *dev) if (ret) return ret; - /* SYS_OFF_PRIO_FIRMWARE + 1 so that it runs before acpi_power_off */ + /* SYS_OFF_PRIO_FIRMWARE + 1 so that it runs before acpi_power_off() */ lenovo_yoga_tab2_830_1050_sys_off_handler = register_sys_off_handler(SYS_OFF_MODE_POWER_OFF, SYS_OFF_PRIO_FIRMWARE + 1, lenovo_yoga_tab2_830_1050_power_off, NULL); @@ -742,7 +742,7 @@ static int __init lenovo_yoga_tab2_1380_init(struct device *dev) if (ret) return ret; - /* SYS_OFF_PRIO_FIRMWARE + 1 so that it runs before acpi_power_off */ + /* SYS_OFF_PRIO_FIRMWARE + 1 so that it runs before acpi_power_off() */ lenovo_yoga_tab2_830_1050_sys_off_handler = register_sys_off_handler(SYS_OFF_MODE_POWER_OFF, SYS_OFF_PRIO_FIRMWARE + 1, lenovo_yoga_tab2_830_1050_power_off, NULL); @@ -799,7 +799,7 @@ static const struct software_node fg_bq25890_1_supply_node = { .properties = fg_bq25890_1_supply_props, }; -/* bq25892 charger settings for the flat lipo battery behind the screen */ +/* bq25892 charger settings for the flat LiPo battery behind the screen */ static const struct property_entry lenovo_yt3_bq25892_0_props[] = { PROPERTY_ENTRY_STRING_ARRAY("supplied-from", lenovo_yt3_bq25892_0_suppliers), PROPERTY_ENTRY_U32("linux,iinlim-percentage", 40), @@ -833,7 +833,7 @@ static const struct software_node lenovo_yt3_hideep_ts_node = { static const struct x86_i2c_client_info lenovo_yt3_i2c_clients[] __initconst = { { - /* bq27500 fuel-gauge for the flat lipo battery behind the screen */ + /* bq27500 fuel-gauge for the flat LiPo battery behind the screen */ .board_info = { .type = "bq27500", .addr = 0x55, @@ -842,7 +842,7 @@ static const struct x86_i2c_client_info lenovo_yt3_i2c_clients[] __initconst = { }, .adapter_path = "\\_SB_.PCI0.I2C1", }, { - /* bq25892 charger for the flat lipo battery behind the screen */ + /* bq25892 charger for the flat LiPo battery behind the screen */ .board_info = { .type = "bq25892", .addr = 0x6b, @@ -859,7 +859,7 @@ static const struct x86_i2c_client_info lenovo_yt3_i2c_clients[] __initconst = { .con_id = "bq25892_0_irq", }, }, { - /* bq27500 fuel-gauge for the round li-ion cells in the hinge */ + /* bq27500 fuel-gauge for the round Li-ion cells in the hinge */ .board_info = { .type = "bq27500", .addr = 0x55, |