diff options
Diffstat (limited to 'drivers/power/supply/ab8500_charger.c')
| -rw-r--r-- | drivers/power/supply/ab8500_charger.c | 35 |
1 files changed, 19 insertions, 16 deletions
diff --git a/drivers/power/supply/ab8500_charger.c b/drivers/power/supply/ab8500_charger.c index f69550d64f09..9469fe182d02 100644 --- a/drivers/power/supply/ab8500_charger.c +++ b/drivers/power/supply/ab8500_charger.c @@ -404,7 +404,7 @@ disable_otp: } /** - * ab8500_power_supply_changed - a wrapper with local extentions for + * ab8500_power_supply_changed - a wrapper with local extensions for * power_supply_changed * @di: pointer to the ab8500_charger structure * @psy: pointer to power_supply_that have changed. @@ -683,7 +683,7 @@ static int ab8500_charger_max_usb_curr(struct ab8500_charger *di, /* * Platform only supports USB 2.0. * This means that charging current from USB source - * is maximum 500 mA. Every occurence of USB_STAT_*_HOST_* + * is maximum 500 mA. Every occurrence of USB_STAT_*_HOST_* * should set USB_CH_IP_CUR_LVL_0P5. */ @@ -1379,13 +1379,13 @@ static int ab8500_charger_ac_en(struct ux500_charger *charger, /* * Due to a bug in AB8500, BTEMP_HIGH/LOW interrupts - * will be triggered everytime we enable the VDD ADC supply. + * will be triggered every time we enable the VDD ADC supply. * This will turn off charging for a short while. * It can be avoided by having the supply on when * there is a charger enabled. Normally the VDD ADC supply - * is enabled everytime a GPADC conversion is triggered. We will - * force it to be enabled from this driver to have - * the GPADC module independant of the AB8500 chargers + * is enabled every time a GPADC conversion is triggered. + * We will force it to be enabled from this driver to have + * the GPADC module independent of the AB8500 chargers */ if (!di->vddadc_en_ac) { ret = regulator_enable(di->regu); @@ -1455,7 +1455,7 @@ static int ab8500_charger_ac_en(struct ux500_charger *charger, if (is_ab8500_1p1_or_earlier(di->parent)) { /* * For ABB revision 1.0 and 1.1 there is a bug in the - * watchdog logic. That means we have to continously + * watchdog logic. That means we have to continuously * kick the charger watchdog even when no charger is * connected. This is only valid once the AC charger * has been enabled. This is a bug that is not handled @@ -1552,13 +1552,13 @@ static int ab8500_charger_usb_en(struct ux500_charger *charger, /* * Due to a bug in AB8500, BTEMP_HIGH/LOW interrupts - * will be triggered everytime we enable the VDD ADC supply. + * will be triggered every time we enable the VDD ADC supply. * This will turn off charging for a short while. * It can be avoided by having the supply on when * there is a charger enabled. Normally the VDD ADC supply - * is enabled everytime a GPADC conversion is triggered. We will - * force it to be enabled from this driver to have - * the GPADC module independant of the AB8500 chargers + * is enabled every time a GPADC conversion is triggered. + * We will force it to be enabled from this driver to have + * the GPADC module independent of the AB8500 chargers */ if (!di->vddadc_en_usb) { ret = regulator_enable(di->regu); @@ -1582,7 +1582,10 @@ static int ab8500_charger_usb_en(struct ux500_charger *charger, return -ENXIO; } - /* ChVoltLevel: max voltage upto which battery can be charged */ + /* + * ChVoltLevel: max voltage up to which battery can be + * charged + */ ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, AB8500_CH_VOLT_LVL_REG, (u8) volt_index); if (ret) { @@ -2014,7 +2017,7 @@ static void ab8500_charger_check_hw_failure_work(struct work_struct *work) * Work queue function for kicking the charger watchdog. * * For ABB revision 1.0 and 1.1 there is a bug in the watchdog - * logic. That means we have to continously kick the charger + * logic. That means we have to continuously kick the charger * watchdog even when no charger is connected. This is only * valid once the AC charger has been enabled. This is * a bug that is not handled by the algorithm and the @@ -2262,7 +2265,7 @@ static void ab8500_charger_usb_link_status_work(struct work_struct *work) * Some chargers that breaks the USB spec is * identified as invalid by AB8500 and it refuse * to start the charging process. but by jumping - * thru a few hoops it can be forced to start. + * through a few hoops it can be forced to start. */ if (is_ab8500(di->parent)) ret = abx500_get_register_interruptible(di->dev, AB8500_USB, @@ -3214,7 +3217,7 @@ static int ab8500_charger_resume(struct platform_device *pdev) /* * For ABB revision 1.0 and 1.1 there is a bug in the watchdog - * logic. That means we have to continously kick the charger + * logic. That means we have to continuously kick the charger * watchdog even when no charger is connected. This is only * valid once the AC charger has been enabled. This is * a bug that is not handled by the algorithm and the @@ -3483,7 +3486,7 @@ static int ab8500_charger_probe(struct platform_device *pdev) /* * For ABB revision 1.0 and 1.1 there is a bug in the watchdog - * logic. That means we have to continously kick the charger + * logic. That means we have to continuously kick the charger * watchdog even when no charger is connected. This is only * valid once the AC charger has been enabled. This is * a bug that is not handled by the algorithm and the |