diff options
Diffstat (limited to 'drivers/remoteproc/omap_remoteproc.c')
| -rw-r--r-- | drivers/remoteproc/omap_remoteproc.c | 1200 |
1 files changed, 1182 insertions, 18 deletions
diff --git a/drivers/remoteproc/omap_remoteproc.c b/drivers/remoteproc/omap_remoteproc.c index 6398194075aa..6955fab0a78b 100644 --- a/drivers/remoteproc/omap_remoteproc.c +++ b/drivers/remoteproc/omap_remoteproc.c @@ -2,7 +2,7 @@ /* * OMAP Remote Processor driver * - * Copyright (C) 2011 Texas Instruments, Inc. + * Copyright (C) 2011-2020 Texas Instruments Incorporated - http://www.ti.com/ * Copyright (C) 2011 Google, Inc. * * Ohad Ben-Cohen <ohad@wizery.com> @@ -15,31 +15,466 @@ #include <linux/kernel.h> #include <linux/module.h> +#include <linux/clk.h> +#include <linux/clk/ti.h> #include <linux/err.h> +#include <linux/io.h> +#include <linux/of_device.h> +#include <linux/of_reserved_mem.h> #include <linux/platform_device.h> +#include <linux/pm_runtime.h> #include <linux/dma-mapping.h> +#include <linux/interrupt.h> #include <linux/remoteproc.h> #include <linux/mailbox_client.h> +#include <linux/omap-iommu.h> #include <linux/omap-mailbox.h> +#include <linux/regmap.h> +#include <linux/mfd/syscon.h> +#include <linux/reset.h> +#include <clocksource/timer-ti-dm.h> -#include <linux/platform_data/remoteproc-omap.h> +#include <linux/platform_data/dmtimer-omap.h> #include "omap_remoteproc.h" #include "remoteproc_internal.h" +/* default auto-suspend delay (ms) */ +#define DEFAULT_AUTOSUSPEND_DELAY 10000 + +/** + * struct omap_rproc_boot_data - boot data structure for the DSP omap rprocs + * @syscon: regmap handle for the system control configuration module + * @boot_reg: boot register offset within the @syscon regmap + * @boot_reg_shift: bit-field shift required for the boot address value in + * @boot_reg + */ +struct omap_rproc_boot_data { + struct regmap *syscon; + unsigned int boot_reg; + unsigned int boot_reg_shift; +}; + +/** + * struct omap_rproc_mem - internal memory structure + * @cpu_addr: MPU virtual address of the memory region + * @bus_addr: bus address used to access the memory region + * @dev_addr: device address of the memory region from DSP view + * @size: size of the memory region + */ +struct omap_rproc_mem { + void __iomem *cpu_addr; + phys_addr_t bus_addr; + u32 dev_addr; + size_t size; +}; + +/** + * struct omap_rproc_timer - data structure for a timer used by a omap rproc + * @odt: timer pointer + * @timer_ops: OMAP dmtimer ops for @odt timer + * @irq: timer irq + */ +struct omap_rproc_timer { + struct omap_dm_timer *odt; + const struct omap_dm_timer_ops *timer_ops; + int irq; +}; + /** * struct omap_rproc - omap remote processor state * @mbox: mailbox channel handle * @client: mailbox client to request the mailbox channel + * @boot_data: boot data structure for setting processor boot address + * @mem: internal memory regions data + * @num_mems: number of internal memory regions + * @num_timers: number of rproc timer(s) + * @num_wd_timers: number of rproc watchdog timers + * @timers: timer(s) info used by rproc + * @autosuspend_delay: auto-suspend delay value to be used for runtime pm + * @need_resume: if true a resume is needed in the system resume callback * @rproc: rproc handle + * @reset: reset handle + * @pm_comp: completion primitive to sync for suspend response + * @fck: functional clock for the remoteproc + * @suspend_acked: state machine flag to store the suspend request ack */ struct omap_rproc { struct mbox_chan *mbox; struct mbox_client client; + struct omap_rproc_boot_data *boot_data; + struct omap_rproc_mem *mem; + int num_mems; + int num_timers; + int num_wd_timers; + struct omap_rproc_timer *timers; + int autosuspend_delay; + bool need_resume; struct rproc *rproc; + struct reset_control *reset; + struct completion pm_comp; + struct clk *fck; + bool suspend_acked; }; /** + * struct omap_rproc_mem_data - memory definitions for an omap remote processor + * @name: name for this memory entry + * @dev_addr: device address for the memory entry + */ +struct omap_rproc_mem_data { + const char *name; + const u32 dev_addr; +}; + +/** + * struct omap_rproc_dev_data - device data for the omap remote processor + * @device_name: device name of the remote processor + * @mems: memory definitions for this remote processor + */ +struct omap_rproc_dev_data { + const char *device_name; + const struct omap_rproc_mem_data *mems; +}; + +/** + * omap_rproc_request_timer() - request a timer for a remoteproc + * @dev: device requesting the timer + * @np: device node pointer to the desired timer + * @timer: handle to a struct omap_rproc_timer to return the timer handle + * + * This helper function is used primarily to request a timer associated with + * a remoteproc. The returned handle is stored in the .odt field of the + * @timer structure passed in, and is used to invoke other timer specific + * ops (like starting a timer either during device initialization or during + * a resume operation, or for stopping/freeing a timer). + * + * Return: 0 on success, otherwise an appropriate failure + */ +static int omap_rproc_request_timer(struct device *dev, struct device_node *np, + struct omap_rproc_timer *timer) +{ + int ret; + + timer->odt = timer->timer_ops->request_by_node(np); + if (!timer->odt) { + dev_err(dev, "request for timer node %p failed\n", np); + return -EBUSY; + } + + ret = timer->timer_ops->set_source(timer->odt, OMAP_TIMER_SRC_SYS_CLK); + if (ret) { + dev_err(dev, "error setting OMAP_TIMER_SRC_SYS_CLK as source for timer node %p\n", + np); + timer->timer_ops->free(timer->odt); + return ret; + } + + /* clean counter, remoteproc code will set the value */ + timer->timer_ops->set_load(timer->odt, 0); + + return 0; +} + +/** + * omap_rproc_start_timer() - start a timer for a remoteproc + * @timer: handle to a OMAP rproc timer + * + * This helper function is used to start a timer associated with a remoteproc, + * obtained using the request_timer ops. The helper function needs to be + * invoked by the driver to start the timer (during device initialization) + * or to just resume the timer. + * + * Return: 0 on success, otherwise a failure as returned by DMTimer ops + */ +static inline int omap_rproc_start_timer(struct omap_rproc_timer *timer) +{ + return timer->timer_ops->start(timer->odt); +} + +/** + * omap_rproc_stop_timer() - stop a timer for a remoteproc + * @timer: handle to a OMAP rproc timer + * + * This helper function is used to disable a timer associated with a + * remoteproc, and needs to be called either during a device shutdown + * or suspend operation. The separate helper function allows the driver + * to just stop a timer without having to release the timer during a + * suspend operation. + * + * Return: 0 on success, otherwise a failure as returned by DMTimer ops + */ +static inline int omap_rproc_stop_timer(struct omap_rproc_timer *timer) +{ + return timer->timer_ops->stop(timer->odt); +} + +/** + * omap_rproc_release_timer() - release a timer for a remoteproc + * @timer: handle to a OMAP rproc timer + * + * This helper function is used primarily to release a timer associated + * with a remoteproc. The dmtimer will be available for other clients to + * use once released. + * + * Return: 0 on success, otherwise a failure as returned by DMTimer ops + */ +static inline int omap_rproc_release_timer(struct omap_rproc_timer *timer) +{ + return timer->timer_ops->free(timer->odt); +} + +/** + * omap_rproc_get_timer_irq() - get the irq for a timer + * @timer: handle to a OMAP rproc timer + * + * This function is used to get the irq associated with a watchdog timer. The + * function is called by the OMAP remoteproc driver to register a interrupt + * handler to handle watchdog events on the remote processor. + * + * Return: irq id on success, otherwise a failure as returned by DMTimer ops + */ +static inline int omap_rproc_get_timer_irq(struct omap_rproc_timer *timer) +{ + return timer->timer_ops->get_irq(timer->odt); +} + +/** + * omap_rproc_ack_timer_irq() - acknowledge a timer irq + * @timer: handle to a OMAP rproc timer + * + * This function is used to clear the irq associated with a watchdog timer. The + * The function is called by the OMAP remoteproc upon a watchdog event on the + * remote processor to clear the interrupt status of the watchdog timer. + */ +static inline void omap_rproc_ack_timer_irq(struct omap_rproc_timer *timer) +{ + timer->timer_ops->write_status(timer->odt, OMAP_TIMER_INT_OVERFLOW); +} + +/** + * omap_rproc_watchdog_isr() - Watchdog ISR handler for remoteproc device + * @irq: IRQ number associated with a watchdog timer + * @data: IRQ handler data + * + * This ISR routine executes the required necessary low-level code to + * acknowledge a watchdog timer interrupt. There can be multiple watchdog + * timers associated with a rproc (like IPUs which have 2 watchdog timers, + * one per Cortex M3/M4 core), so a lookup has to be performed to identify + * the timer to acknowledge its interrupt. + * + * The function also invokes rproc_report_crash to report the watchdog event + * to the remoteproc driver core, to trigger a recovery. + * + * Return: IRQ_HANDLED on success, otherwise IRQ_NONE + */ +static irqreturn_t omap_rproc_watchdog_isr(int irq, void *data) +{ + struct rproc *rproc = data; + struct omap_rproc *oproc = rproc->priv; + struct device *dev = rproc->dev.parent; + struct omap_rproc_timer *timers = oproc->timers; + struct omap_rproc_timer *wd_timer = NULL; + int num_timers = oproc->num_timers + oproc->num_wd_timers; + int i; + + for (i = oproc->num_timers; i < num_timers; i++) { + if (timers[i].irq > 0 && irq == timers[i].irq) { + wd_timer = &timers[i]; + break; + } + } + + if (!wd_timer) { + dev_err(dev, "invalid timer\n"); + return IRQ_NONE; + } + + omap_rproc_ack_timer_irq(wd_timer); + + rproc_report_crash(rproc, RPROC_WATCHDOG); + + return IRQ_HANDLED; +} + +/** + * omap_rproc_enable_timers() - enable the timers for a remoteproc + * @rproc: handle of a remote processor + * @configure: boolean flag used to acquire and configure the timer handle + * + * This function is used primarily to enable the timers associated with + * a remoteproc. The configure flag is provided to allow the driver to + * to either acquire and start a timer (during device initialization) or + * to just start a timer (during a resume operation). + * + * Return: 0 on success, otherwise an appropriate failure + */ +static int omap_rproc_enable_timers(struct rproc *rproc, bool configure) +{ + int i; + int ret = 0; + struct platform_device *tpdev; + struct dmtimer_platform_data *tpdata; + const struct omap_dm_timer_ops *timer_ops; + struct omap_rproc *oproc = rproc->priv; + struct omap_rproc_timer *timers = oproc->timers; + struct device *dev = rproc->dev.parent; + struct device_node *np = NULL; + int num_timers = oproc->num_timers + oproc->num_wd_timers; + + if (!num_timers) + return 0; + + if (!configure) + goto start_timers; + + for (i = 0; i < num_timers; i++) { + if (i < oproc->num_timers) + np = of_parse_phandle(dev->of_node, "ti,timers", i); + else + np = of_parse_phandle(dev->of_node, + "ti,watchdog-timers", + (i - oproc->num_timers)); + if (!np) { + ret = -ENXIO; + dev_err(dev, "device node lookup for timer at index %d failed: %d\n", + i < oproc->num_timers ? i : + i - oproc->num_timers, ret); + goto free_timers; + } + + tpdev = of_find_device_by_node(np); + if (!tpdev) { + ret = -ENODEV; + dev_err(dev, "could not get timer platform device\n"); + goto put_node; + } + + tpdata = dev_get_platdata(&tpdev->dev); + put_device(&tpdev->dev); + if (!tpdata) { + ret = -EINVAL; + dev_err(dev, "dmtimer pdata structure NULL\n"); + goto put_node; + } + + timer_ops = tpdata->timer_ops; + if (!timer_ops || !timer_ops->request_by_node || + !timer_ops->set_source || !timer_ops->set_load || + !timer_ops->free || !timer_ops->start || + !timer_ops->stop || !timer_ops->get_irq || + !timer_ops->write_status) { + ret = -EINVAL; + dev_err(dev, "device does not have required timer ops\n"); + goto put_node; + } + + timers[i].irq = -1; + timers[i].timer_ops = timer_ops; + ret = omap_rproc_request_timer(dev, np, &timers[i]); + if (ret) { + dev_err(dev, "request for timer %p failed: %d\n", np, + ret); + goto put_node; + } + of_node_put(np); + + if (i >= oproc->num_timers) { + timers[i].irq = omap_rproc_get_timer_irq(&timers[i]); + if (timers[i].irq < 0) { + dev_err(dev, "get_irq for timer %p failed: %d\n", + np, timers[i].irq); + ret = -EBUSY; + goto free_timers; + } + + ret = request_irq(timers[i].irq, + omap_rproc_watchdog_isr, IRQF_SHARED, + "rproc-wdt", rproc); + if (ret) { + dev_err(dev, "error requesting irq for timer %p\n", + np); + omap_rproc_release_timer(&timers[i]); + timers[i].odt = NULL; + timers[i].timer_ops = NULL; + timers[i].irq = -1; + goto free_timers; + } + } + } + +start_timers: + for (i = 0; i < num_timers; i++) { + ret = omap_rproc_start_timer(&timers[i]); + if (ret) { + dev_err(dev, "start timer %p failed failed: %d\n", np, + ret); + break; + } + } + if (ret) { + while (i >= 0) { + omap_rproc_stop_timer(&timers[i]); + i--; + } + goto put_node; + } + return 0; + +put_node: + if (configure) + of_node_put(np); +free_timers: + while (i--) { + if (i >= oproc->num_timers) + free_irq(timers[i].irq, rproc); + omap_rproc_release_timer(&timers[i]); + timers[i].odt = NULL; + timers[i].timer_ops = NULL; + timers[i].irq = -1; + } + + return ret; +} + +/** + * omap_rproc_disable_timers() - disable the timers for a remoteproc + * @rproc: handle of a remote processor + * @configure: boolean flag used to release the timer handle + * + * This function is used primarily to disable the timers associated with + * a remoteproc. The configure flag is provided to allow the driver to + * to either stop and release a timer (during device shutdown) or to just + * stop a timer (during a suspend operation). + * + * Return: 0 on success or no timers + */ +static int omap_rproc_disable_timers(struct rproc *rproc, bool configure) +{ + int i; + struct omap_rproc *oproc = rproc->priv; + struct omap_rproc_timer *timers = oproc->timers; + int num_timers = oproc->num_timers + oproc->num_wd_timers; + + if (!num_timers) + return 0; + + for (i = 0; i < num_timers; i++) { + omap_rproc_stop_timer(&timers[i]); + if (configure) { + if (i >= oproc->num_timers) + free_irq(timers[i].irq, rproc); + omap_rproc_release_timer(&timers[i]); + timers[i].odt = NULL; + timers[i].timer_ops = NULL; + timers[i].irq = -1; + } + } + + return 0; +} + +/** * omap_rproc_mbox_callback() - inbound mailbox message handler * @client: mailbox client pointer used for requesting the mailbox channel * @data: mailbox payload @@ -65,13 +500,29 @@ static void omap_rproc_mbox_callback(struct mbox_client *client, void *data) switch (msg) { case RP_MBOX_CRASH: - /* just log this for now. later, we'll also do recovery */ + /* + * remoteproc detected an exception, notify the rproc core. + * The remoteproc core will handle the recovery. + */ dev_err(dev, "omap rproc %s crashed\n", name); + rproc_report_crash(oproc->rproc, RPROC_FATAL_ERROR); break; case RP_MBOX_ECHO_REPLY: dev_info(dev, "received echo reply from %s\n", name); break; + case RP_MBOX_SUSPEND_ACK: + /* Fall through */ + case RP_MBOX_SUSPEND_CANCEL: + oproc->suspend_acked = msg == RP_MBOX_SUSPEND_ACK; + complete(&oproc->pm_comp); + break; default: + if (msg >= RP_MBOX_READY && msg < RP_MBOX_END_MSG) + return; + if (msg > oproc->rproc->max_notifyid) { + dev_dbg(dev, "dropping unknown message 0x%x", msg); + return; + } /* msg contains the index of the triggered vring */ if (rproc_vq_interrupt(oproc->rproc, msg) == IRQ_NONE) dev_dbg(dev, "no message was found in vqid %d\n", msg); @@ -85,11 +536,52 @@ static void omap_rproc_kick(struct rproc *rproc, int vqid) struct device *dev = rproc->dev.parent; int ret; + /* wake up the rproc before kicking it */ + ret = pm_runtime_get_sync(dev); + if (WARN_ON(ret < 0)) { + dev_err(dev, "pm_runtime_get_sync() failed during kick, ret = %d\n", + ret); + pm_runtime_put_noidle(dev); + return; + } + /* send the index of the triggered virtqueue in the mailbox payload */ ret = mbox_send_message(oproc->mbox, (void *)vqid); if (ret < 0) dev_err(dev, "failed to send mailbox message, status = %d\n", ret); + + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); +} + +/** + * omap_rproc_write_dsp_boot_addr() - set boot address for DSP remote processor + * @rproc: handle of a remote processor + * + * Set boot address for a supported DSP remote processor. + * + * Return: 0 on success, or -EINVAL if boot address is not aligned properly + */ +static int omap_rproc_write_dsp_boot_addr(struct rproc *rproc) +{ + struct device *dev = rproc->dev.parent; + struct omap_rproc *oproc = rproc->priv; + struct omap_rproc_boot_data *bdata = oproc->boot_data; + u32 offset = bdata->boot_reg; + u32 value; + u32 mask; + + if (rproc->bootaddr & (SZ_1K - 1)) { + dev_err(dev, "invalid boot address 0x%llx, must be aligned on a 1KB boundary\n", + rproc->bootaddr); + return -EINVAL; + } + + value = rproc->bootaddr >> bdata->boot_reg_shift; + mask = ~(SZ_1K - 1) >> bdata->boot_reg_shift; + + return regmap_update_bits(bdata->syscon, offset, mask, value); } /* @@ -103,13 +595,14 @@ static int omap_rproc_start(struct rproc *rproc) { struct omap_rproc *oproc = rproc->priv; struct device *dev = rproc->dev.parent; - struct platform_device *pdev = to_platform_device(dev); - struct omap_rproc_pdata *pdata = pdev->dev.platform_data; int ret; struct mbox_client *client = &oproc->client; - if (pdata->set_bootaddr) - pdata->set_bootaddr(rproc->bootaddr); + if (oproc->boot_data) { + ret = omap_rproc_write_dsp_boot_addr(rproc); + if (ret) + return ret; + } client->dev = dev; client->tx_done = NULL; @@ -117,7 +610,7 @@ static int omap_rproc_start(struct rproc *rproc) client->tx_block = false; client->knows_txdone = false; - oproc->mbox = omap_mbox_request_channel(client, pdata->mbox_name); + oproc->mbox = mbox_request_channel(client, 0); if (IS_ERR(oproc->mbox)) { ret = -EBUSY; dev_err(dev, "mbox_request_channel failed: %ld\n", @@ -138,14 +631,34 @@ static int omap_rproc_start(struct rproc *rproc) goto put_mbox; } - ret = pdata->device_enable(pdev); + ret = omap_rproc_enable_timers(rproc, true); if (ret) { - dev_err(dev, "omap_device_enable failed: %d\n", ret); + dev_err(dev, "omap_rproc_enable_timers failed: %d\n", ret); goto put_mbox; } + ret = reset_control_deassert(oproc->reset); + if (ret) { + dev_err(dev, "reset control deassert failed: %d\n", ret); + goto disable_timers; + } + + /* + * remote processor is up, so update the runtime pm status and + * enable the auto-suspend. The device usage count is incremented + * manually for balancing it for auto-suspend + */ + pm_runtime_set_active(dev); + pm_runtime_use_autosuspend(dev); + pm_runtime_get_noresume(dev); + pm_runtime_enable(dev); + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + return 0; +disable_timers: + omap_rproc_disable_timers(rproc, true); put_mbox: mbox_free_channel(oproc->mbox); return ret; @@ -155,32 +668,638 @@ put_mbox: static int omap_rproc_stop(struct rproc *rproc) { struct device *dev = rproc->dev.parent; - struct platform_device *pdev = to_platform_device(dev); - struct omap_rproc_pdata *pdata = pdev->dev.platform_data; struct omap_rproc *oproc = rproc->priv; int ret; - ret = pdata->device_shutdown(pdev); - if (ret) + /* + * cancel any possible scheduled runtime suspend by incrementing + * the device usage count, and resuming the device. The remoteproc + * also needs to be woken up if suspended, to avoid the remoteproc + * OS to continue to remember any context that it has saved, and + * avoid potential issues in misindentifying a subsequent device + * reboot as a power restore boot + */ + ret = pm_runtime_get_sync(dev); + if (ret < 0) { + pm_runtime_put_noidle(dev); return ret; + } + + ret = reset_control_assert(oproc->reset); + if (ret) + goto out; + + ret = omap_rproc_disable_timers(rproc, true); + if (ret) + goto enable_device; mbox_free_channel(oproc->mbox); + /* + * update the runtime pm states and status now that the remoteproc + * has stopped + */ + pm_runtime_disable(dev); + pm_runtime_dont_use_autosuspend(dev); + pm_runtime_put_noidle(dev); + pm_runtime_set_suspended(dev); + return 0; + +enable_device: + reset_control_deassert(oproc->reset); +out: + /* schedule the next auto-suspend */ + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + return ret; +} + +/** + * omap_rproc_da_to_va() - internal memory translation helper + * @rproc: remote processor to apply the address translation for + * @da: device address to translate + * @len: length of the memory buffer + * + * Custom function implementing the rproc .da_to_va ops to provide address + * translation (device address to kernel virtual address) for internal RAMs + * present in a DSP or IPU device). The translated addresses can be used + * either by the remoteproc core for loading, or by any rpmsg bus drivers. + * + * Return: translated virtual address in kernel memory space on success, + * or NULL on failure. + */ +static void *omap_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len) +{ + struct omap_rproc *oproc = rproc->priv; + int i; + u32 offset; + + if (len <= 0) + return NULL; + + if (!oproc->num_mems) + return NULL; + + for (i = 0; i < oproc->num_mems; i++) { + if (da >= oproc->mem[i].dev_addr && da + len <= + oproc->mem[i].dev_addr + oproc->mem[i].size) { + offset = da - oproc->mem[i].dev_addr; + /* __force to make sparse happy with type conversion */ + return (__force void *)(oproc->mem[i].cpu_addr + + offset); + } + } + + return NULL; } static const struct rproc_ops omap_rproc_ops = { .start = omap_rproc_start, .stop = omap_rproc_stop, .kick = omap_rproc_kick, + .da_to_va = omap_rproc_da_to_va, +}; + +#ifdef CONFIG_PM +static bool _is_rproc_in_standby(struct omap_rproc *oproc) +{ + return ti_clk_is_in_standby(oproc->fck); +} + +/* 1 sec is long enough time to let the remoteproc side suspend the device */ +#define DEF_SUSPEND_TIMEOUT 1000 +static int _omap_rproc_suspend(struct rproc *rproc, bool auto_suspend) +{ + struct device *dev = rproc->dev.parent; + struct omap_rproc *oproc = rproc->priv; + unsigned long to = msecs_to_jiffies(DEF_SUSPEND_TIMEOUT); + unsigned long ta = jiffies + to; + u32 suspend_msg = auto_suspend ? + RP_MBOX_SUSPEND_AUTO : RP_MBOX_SUSPEND_SYSTEM; + int ret; + + reinit_completion(&oproc->pm_comp); + oproc->suspend_acked = false; + ret = mbox_send_message(oproc->mbox, (void *)suspend_msg); + if (ret < 0) { + dev_err(dev, "PM mbox_send_message failed: %d\n", ret); + return ret; + } + + ret = wait_for_completion_timeout(&oproc->pm_comp, to); + if (!oproc->suspend_acked) + return -EBUSY; + + /* + * The remoteproc side is returning the ACK message before saving the + * context, because the context saving is performed within a SYS/BIOS + * function, and it cannot have any inter-dependencies against the IPC + * layer. Also, as the SYS/BIOS needs to preserve properly the processor + * register set, sending this ACK or signalling the completion of the + * context save through a shared memory variable can never be the + * absolute last thing to be executed on the remoteproc side, and the + * MPU cannot use the ACK message as a sync point to put the remoteproc + * into reset. The only way to ensure that the remote processor has + * completed saving the context is to check that the module has reached + * STANDBY state (after saving the context, the SYS/BIOS executes the + * appropriate target-specific WFI instruction causing the module to + * enter STANDBY). + */ + while (!_is_rproc_in_standby(oproc)) { + if (time_after(jiffies, ta)) + return -ETIME; + schedule(); + } + + ret = reset_control_assert(oproc->reset); + if (ret) { + dev_err(dev, "reset assert during suspend failed %d\n", ret); + return ret; + } + + ret = omap_rproc_disable_timers(rproc, false); + if (ret) { + dev_err(dev, "disabling timers during suspend failed %d\n", + ret); + goto enable_device; + } + + /* + * IOMMUs would have to be disabled specifically for runtime suspend. + * They are handled automatically through System PM callbacks for + * regular system suspend + */ + if (auto_suspend) { + ret = omap_iommu_domain_deactivate(rproc->domain); + if (ret) { + dev_err(dev, "iommu domain deactivate failed %d\n", + ret); + goto enable_timers; + } + } + + return 0; + +enable_timers: + /* ignore errors on re-enabling code */ + omap_rproc_enable_timers(rproc, false); +enable_device: + reset_control_deassert(oproc->reset); + return ret; +} + +static int _omap_rproc_resume(struct rproc *rproc, bool auto_suspend) +{ + struct device *dev = rproc->dev.parent; + struct omap_rproc *oproc = rproc->priv; + int ret; + + /* + * IOMMUs would have to be enabled specifically for runtime resume. + * They would have been already enabled automatically through System + * PM callbacks for regular system resume + */ + if (auto_suspend) { + ret = omap_iommu_domain_activate(rproc->domain); + if (ret) { + dev_err(dev, "omap_iommu activate failed %d\n", ret); + goto out; + } + } + + /* boot address could be lost after suspend, so restore it */ + if (oproc->boot_data) { + ret = omap_rproc_write_dsp_boot_addr(rproc); + if (ret) { + dev_err(dev, "boot address restore failed %d\n", ret); + goto suspend_iommu; + } + } + + ret = omap_rproc_enable_timers(rproc, false); + if (ret) { + dev_err(dev, "enabling timers during resume failed %d\n", ret); + goto suspend_iommu; + } + + ret = reset_control_deassert(oproc->reset); + if (ret) { + dev_err(dev, "reset deassert during resume failed %d\n", ret); + goto disable_timers; + } + + return 0; + +disable_timers: + omap_rproc_disable_timers(rproc, false); +suspend_iommu: + if (auto_suspend) + omap_iommu_domain_deactivate(rproc->domain); +out: + return ret; +} + +static int __maybe_unused omap_rproc_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct rproc *rproc = platform_get_drvdata(pdev); + struct omap_rproc *oproc = rproc->priv; + int ret = 0; + + mutex_lock(&rproc->lock); + if (rproc->state == RPROC_OFFLINE) + goto out; + + if (rproc->state == RPROC_SUSPENDED) + goto out; + + if (rproc->state != RPROC_RUNNING) { + ret = -EBUSY; + goto out; + } + + ret = _omap_rproc_suspend(rproc, false); + if (ret) { + dev_err(dev, "suspend failed %d\n", ret); + goto out; + } + + /* + * remoteproc is running at the time of system suspend, so remember + * it so as to wake it up during system resume + */ + oproc->need_resume = true; + rproc->state = RPROC_SUSPENDED; + +out: + mutex_unlock(&rproc->lock); + return ret; +} + +static int __maybe_unused omap_rproc_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct rproc *rproc = platform_get_drvdata(pdev); + struct omap_rproc *oproc = rproc->priv; + int ret = 0; + + mutex_lock(&rproc->lock); + if (rproc->state == RPROC_OFFLINE) + goto out; + + if (rproc->state != RPROC_SUSPENDED) { + ret = -EBUSY; + goto out; + } + + /* + * remoteproc was auto-suspended at the time of system suspend, + * so no need to wake-up the processor (leave it in suspended + * state, will be woken up during a subsequent runtime_resume) + */ + if (!oproc->need_resume) + goto out; + + ret = _omap_rproc_resume(rproc, false); + if (ret) { + dev_err(dev, "resume failed %d\n", ret); + goto out; + } + + oproc->need_resume = false; + rproc->state = RPROC_RUNNING; + + pm_runtime_mark_last_busy(dev); +out: + mutex_unlock(&rproc->lock); + return ret; +} + +static int omap_rproc_runtime_suspend(struct device *dev) +{ + struct rproc *rproc = dev_get_drvdata(dev); + struct omap_rproc *oproc = rproc->priv; + int ret; + + mutex_lock(&rproc->lock); + if (rproc->state == RPROC_CRASHED) { + dev_dbg(dev, "rproc cannot be runtime suspended when crashed!\n"); + ret = -EBUSY; + goto out; + } + + if (WARN_ON(rproc->state != RPROC_RUNNING)) { + dev_err(dev, "rproc cannot be runtime suspended when not running!\n"); + ret = -EBUSY; + goto out; + } + + /* + * do not even attempt suspend if the remote processor is not + * idled for runtime auto-suspend + */ + if (!_is_rproc_in_standby(oproc)) { + ret = -EBUSY; + goto abort; + } + + ret = _omap_rproc_suspend(rproc, true); + if (ret) + goto abort; + + rproc->state = RPROC_SUSPENDED; + mutex_unlock(&rproc->lock); + return 0; + +abort: + pm_runtime_mark_last_busy(dev); +out: + mutex_unlock(&rproc->lock); + return ret; +} + +static int omap_rproc_runtime_resume(struct device *dev) +{ + struct rproc *rproc = dev_get_drvdata(dev); + int ret; + + mutex_lock(&rproc->lock); + if (WARN_ON(rproc->state != RPROC_SUSPENDED)) { + dev_err(dev, "rproc cannot be runtime resumed if not suspended! state=%d\n", + rproc->state); + ret = -EBUSY; + goto out; + } + + ret = _omap_rproc_resume(rproc, true); + if (ret) { + dev_err(dev, "runtime resume failed %d\n", ret); + goto out; + } + + rproc->state = RPROC_RUNNING; +out: + mutex_unlock(&rproc->lock); + return ret; +} +#endif /* CONFIG_PM */ + +static const struct omap_rproc_mem_data ipu_mems[] = { + { .name = "l2ram", .dev_addr = 0x20000000 }, + { }, +}; + +static const struct omap_rproc_mem_data dra7_dsp_mems[] = { + { .name = "l2ram", .dev_addr = 0x800000 }, + { .name = "l1pram", .dev_addr = 0xe00000 }, + { .name = "l1dram", .dev_addr = 0xf00000 }, + { }, +}; + +static const struct omap_rproc_dev_data omap4_dsp_dev_data = { + .device_name = "dsp", +}; + +static const struct omap_rproc_dev_data omap4_ipu_dev_data = { + .device_name = "ipu", + .mems = ipu_mems, }; +static const struct omap_rproc_dev_data omap5_dsp_dev_data = { + .device_name = "dsp", +}; + +static const struct omap_rproc_dev_data omap5_ipu_dev_data = { + .device_name = "ipu", + .mems = ipu_mems, +}; + +static const struct omap_rproc_dev_data dra7_dsp_dev_data = { + .device_name = "dsp", + .mems = dra7_dsp_mems, +}; + +static const struct omap_rproc_dev_data dra7_ipu_dev_data = { + .device_name = "ipu", + .mems = ipu_mems, +}; + +static const struct of_device_id omap_rproc_of_match[] = { + { + .compatible = "ti,omap4-dsp", + .data = &omap4_dsp_dev_data, + }, + { + .compatible = "ti,omap4-ipu", + .data = &omap4_ipu_dev_data, + }, + { + .compatible = "ti,omap5-dsp", + .data = &omap5_dsp_dev_data, + }, + { + .compatible = "ti,omap5-ipu", + .data = &omap5_ipu_dev_data, + }, + { + .compatible = "ti,dra7-dsp", + .data = &dra7_dsp_dev_data, + }, + { + .compatible = "ti,dra7-ipu", + .data = &dra7_ipu_dev_data, + }, + { + /* end */ + }, +}; +MODULE_DEVICE_TABLE(of, omap_rproc_of_match); + +static const char *omap_rproc_get_firmware(struct platform_device *pdev) +{ + const char *fw_name; + int ret; + + ret = of_property_read_string(pdev->dev.of_node, "firmware-name", + &fw_name); + if (ret) + return ERR_PTR(ret); + + return fw_name; +} + +static int omap_rproc_get_boot_data(struct platform_device *pdev, + struct rproc *rproc) +{ + struct device_node *np = pdev->dev.of_node; + struct omap_rproc *oproc = rproc->priv; + const struct omap_rproc_dev_data *data; + int ret; + + data = of_device_get_match_data(&pdev->dev); + if (!data) + return -ENODEV; + + if (!of_property_read_bool(np, "ti,bootreg")) + return 0; + + oproc->boot_data = devm_kzalloc(&pdev->dev, sizeof(*oproc->boot_data), + GFP_KERNEL); + if (!oproc->boot_data) + return -ENOMEM; + + oproc->boot_data->syscon = + syscon_regmap_lookup_by_phandle(np, "ti,bootreg"); + if (IS_ERR(oproc->boot_data->syscon)) { + ret = PTR_ERR(oproc->boot_data->syscon); + return ret; + } + + if (of_property_read_u32_index(np, "ti,bootreg", 1, + &oproc->boot_data->boot_reg)) { + dev_err(&pdev->dev, "couldn't get the boot register\n"); + return -EINVAL; + } + + of_property_read_u32_index(np, "ti,bootreg", 2, + &oproc->boot_data->boot_reg_shift); + + return 0; +} + +static int omap_rproc_of_get_internal_memories(struct platform_device *pdev, + struct rproc *rproc) +{ + struct omap_rproc *oproc = rproc->priv; + struct device *dev = &pdev->dev; + const struct omap_rproc_dev_data *data; + struct resource *res; + int num_mems; + int i; + + data = of_device_get_match_data(dev); + if (!data) + return -ENODEV; + + if (!data->mems) + return 0; + + num_mems = of_property_count_elems_of_size(dev->of_node, "reg", + sizeof(u32)) / 2; + + oproc->mem = devm_kcalloc(dev, num_mems, sizeof(*oproc->mem), + GFP_KERNEL); + if (!oproc->mem) + return -ENOMEM; + + for (i = 0; data->mems[i].name; i++) { + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + data->mems[i].name); + if (!res) { + dev_err(dev, "no memory defined for %s\n", + data->mems[i].name); + return -ENOMEM; + } + oproc->mem[i].cpu_addr = devm_ioremap_resource(dev, res); + if (IS_ERR(oproc->mem[i].cpu_addr)) { + dev_err(dev, "failed to parse and map %s memory\n", + data->mems[i].name); + return PTR_ERR(oproc->mem[i].cpu_addr); + } + oproc->mem[i].bus_addr = res->start; + oproc->mem[i].dev_addr = data->mems[i].dev_addr; + oproc->mem[i].size = resource_size(res); + + dev_dbg(dev, "memory %8s: bus addr %pa size 0x%x va %pK da 0x%x\n", + data->mems[i].name, &oproc->mem[i].bus_addr, + oproc->mem[i].size, oproc->mem[i].cpu_addr, + oproc->mem[i].dev_addr); + } + oproc->num_mems = num_mems; + + return 0; +} + +#ifdef CONFIG_OMAP_REMOTEPROC_WATCHDOG +static int omap_rproc_count_wdog_timers(struct device *dev) +{ + struct device_node *np = dev->of_node; + int ret; + + ret = of_count_phandle_with_args(np, "ti,watchdog-timers", NULL); + if (ret <= 0) { + dev_dbg(dev, "device does not have watchdog timers, status = %d\n", + ret); + ret = 0; + } + + return ret; +} +#else +static int omap_rproc_count_wdog_timers(struct device *dev) +{ + return 0; +} +#endif + +static int omap_rproc_of_get_timers(struct platform_device *pdev, + struct rproc *rproc) +{ + struct device_node *np = pdev->dev.of_node; + struct omap_rproc *oproc = rproc->priv; + struct device *dev = &pdev->dev; + int num_timers; + + /* + * Timer nodes are directly used in client nodes as phandles, so + * retrieve the count using appropriate size + */ + oproc->num_timers = of_count_phandle_with_args(np, "ti,timers", NULL); + if (oproc->num_timers <= 0) { + dev_dbg(dev, "device does not have timers, status = %d\n", + oproc->num_timers); + oproc->num_timers = 0; + } + + oproc->num_wd_timers = omap_rproc_count_wdog_timers(dev); + + num_timers = oproc->num_timers + oproc->num_wd_timers; + if (num_timers) { + oproc->timers = devm_kcalloc(dev, num_timers, + sizeof(*oproc->timers), + GFP_KERNEL); + if (!oproc->timers) + return -ENOMEM; + + dev_dbg(dev, "device has %d tick timers and %d watchdog timers\n", + oproc->num_timers, oproc->num_wd_timers); + } + + return 0; +} + static int omap_rproc_probe(struct platform_device *pdev) { - struct omap_rproc_pdata *pdata = pdev->dev.platform_data; + struct device_node *np = pdev->dev.of_node; struct omap_rproc *oproc; struct rproc *rproc; + const char *firmware; int ret; + struct reset_control *reset; + + if (!np) { + dev_err(&pdev->dev, "only DT-based devices are supported\n"); + return -ENODEV; + } + + reset = devm_reset_control_array_get_exclusive(&pdev->dev); + if (IS_ERR(reset)) + return PTR_ERR(reset); + + firmware = omap_rproc_get_firmware(pdev); + if (IS_ERR(firmware)) + return PTR_ERR(firmware); ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); if (ret) { @@ -188,24 +1307,60 @@ static int omap_rproc_probe(struct platform_device *pdev) return ret; } - rproc = rproc_alloc(&pdev->dev, pdata->name, &omap_rproc_ops, - pdata->firmware, sizeof(*oproc)); + rproc = rproc_alloc(&pdev->dev, dev_name(&pdev->dev), &omap_rproc_ops, + firmware, sizeof(*oproc)); if (!rproc) return -ENOMEM; oproc = rproc->priv; oproc->rproc = rproc; + oproc->reset = reset; /* All existing OMAP IPU and DSP processors have an MMU */ rproc->has_iommu = true; + ret = omap_rproc_of_get_internal_memories(pdev, rproc); + if (ret) + goto free_rproc; + + ret = omap_rproc_get_boot_data(pdev, rproc); + if (ret) + goto free_rproc; + + ret = omap_rproc_of_get_timers(pdev, rproc); + if (ret) + goto free_rproc; + + init_completion(&oproc->pm_comp); + oproc->autosuspend_delay = DEFAULT_AUTOSUSPEND_DELAY; + + of_property_read_u32(pdev->dev.of_node, "ti,autosuspend-delay-ms", + &oproc->autosuspend_delay); + + pm_runtime_set_autosuspend_delay(&pdev->dev, oproc->autosuspend_delay); + + oproc->fck = devm_clk_get(&pdev->dev, 0); + if (IS_ERR(oproc->fck)) { + ret = PTR_ERR(oproc->fck); + goto free_rproc; + } + + ret = of_reserved_mem_device_init(&pdev->dev); + if (ret) { + dev_warn(&pdev->dev, "device does not have specific CMA pool.\n"); + dev_warn(&pdev->dev, "Typically this should be provided,\n"); + dev_warn(&pdev->dev, "only omit if you know what you are doing.\n"); + } + platform_set_drvdata(pdev, rproc); ret = rproc_add(rproc); if (ret) - goto free_rproc; + goto release_mem; return 0; +release_mem: + of_reserved_mem_device_release(&pdev->dev); free_rproc: rproc_free(rproc); return ret; @@ -217,15 +1372,24 @@ static int omap_rproc_remove(struct platform_device *pdev) rproc_del(rproc); rproc_free(rproc); + of_reserved_mem_device_release(&pdev->dev); return 0; } +static const struct dev_pm_ops omap_rproc_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(omap_rproc_suspend, omap_rproc_resume) + SET_RUNTIME_PM_OPS(omap_rproc_runtime_suspend, + omap_rproc_runtime_resume, NULL) +}; + static struct platform_driver omap_rproc_driver = { .probe = omap_rproc_probe, .remove = omap_rproc_remove, .driver = { .name = "omap-rproc", + .pm = &omap_rproc_pm_ops, + .of_match_table = omap_rproc_of_match, }, }; |