diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/scsi/Kconfig | 81 |
1 files changed, 11 insertions, 70 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index baca5897039f..bd85fb4978e0 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -40,17 +40,10 @@ config SCSI_DMA bool default n -config SCSI_TGT - tristate "SCSI target support" - depends on SCSI - ---help--- - If you want to use SCSI target mode drivers enable this option. - If you choose M, the module will be called scsi_tgt. - config SCSI_NETLINK bool default n - select NET + depends on NET config SCSI_PROC_FS bool "legacy /proc/scsi/ support" @@ -197,20 +190,6 @@ config SCSI_ENCLOSURE it has an enclosure device. Selecting this option will just allow certain enclosure conditions to be reported and is not required. -config SCSI_MULTI_LUN - bool "Probe all LUNs on each SCSI device" - depends on SCSI - help - Some devices support more than one LUN (Logical Unit Number) in order - to allow access to several media, e.g. CD jukebox, USB card reader, - mobile phone in mass storage mode. This option forces the kernel to - probe for all LUNs by default. This setting can be overridden by - max_luns boot/module parameter. Note that this option does not affect - devices conforming to SCSI-3 or higher as they can explicitly report - their number of LUNs. It is safe to say Y here unless you have one of - those rare devices which reacts in an unexpected way when probed for - multiple LUNs. - config SCSI_CONSTANTS bool "Verbose SCSI error reporting (kernel size +=12K)" depends on SCSI @@ -278,20 +257,13 @@ config SCSI_SPI_ATTRS config SCSI_FC_ATTRS tristate "FiberChannel Transport Attributes" - depends on SCSI + depends on SCSI && NET select SCSI_NETLINK help If you wish to export transport-specific information about each attached FiberChannel device to sysfs, say Y. Otherwise, say N. -config SCSI_FC_TGT_ATTRS - bool "SCSI target support for FiberChannel Transport Attributes" - depends on SCSI_FC_ATTRS - depends on SCSI_TGT = y || SCSI_TGT = SCSI_FC_ATTRS - help - If you want to use SCSI target mode drivers enable this option. - config SCSI_ISCSI_ATTRS tristate "iSCSI Transport Attributes" depends on SCSI && NET @@ -318,13 +290,6 @@ config SCSI_SRP_ATTRS If you wish to export transport-specific information about each attached SRP device to sysfs, say Y. -config SCSI_SRP_TGT_ATTRS - bool "SCSI target support for SRP Transport Attributes" - depends on SCSI_SRP_ATTRS - depends on SCSI_TGT = y || SCSI_TGT = SCSI_SRP_ATTRS - help - If you want to use SCSI target mode drivers enable this option. - endmenu menuconfig SCSI_LOWLEVEL @@ -528,7 +493,7 @@ config SCSI_DPT_I2O config SCSI_ADVANSYS tristate "AdvanSys SCSI support" - depends on SCSI && VIRT_TO_BUS + depends on SCSI && VIRT_TO_BUS && !ARM depends on ISA || EISA || PCI help This is a driver for all SCSI host adapters manufactured by @@ -620,28 +585,28 @@ config HYPERV_STORAGE config LIBFC tristate "LibFC module" - select SCSI_FC_ATTRS + depends on SCSI_FC_ATTRS select CRC32 ---help--- Fibre Channel library module config LIBFCOE tristate "LibFCoE module" - select LIBFC + depends on LIBFC ---help--- Library for Fibre Channel over Ethernet module config FCOE tristate "FCoE module" depends on PCI - select LIBFCOE + depends on LIBFCOE ---help--- Fibre Channel over Ethernet module config FCOE_FNIC tristate "Cisco FNIC Driver" depends on PCI && X86 - select LIBFCOE + depends on LIBFCOE help This is support for the Cisco PCI-Express FCoE HBA. @@ -848,24 +813,10 @@ config SCSI_IBMVSCSI To compile this driver as a module, choose M here: the module will be called ibmvscsi. -config SCSI_IBMVSCSIS - tristate "IBM Virtual SCSI Server support" - depends on PPC_PSERIES && SCSI_SRP && SCSI_SRP_TGT_ATTRS - help - This is the SRP target driver for IBM pSeries virtual environments. - - The userspace component needed to initialize the driver and - documentation can be found: - - http://stgt.berlios.de/ - - To compile this driver as a module, choose M here: the - module will be called ibmvstgt. - config SCSI_IBMVFC tristate "IBM Virtual FC support" depends on PPC_PSERIES && SCSI - select SCSI_FC_ATTRS + depends on SCSI_FC_ATTRS help This is the IBM POWER Virtual FC Client @@ -1315,7 +1266,7 @@ source "drivers/scsi/qla4xxx/Kconfig" config SCSI_LPFC tristate "Emulex LightPulse Fibre Channel Support" depends on PCI && SCSI - select SCSI_FC_ATTRS + depends on SCSI_FC_ATTRS select CRC_T10DIF help This lpfc driver supports the Emulex LightPulse @@ -1725,7 +1676,7 @@ config SCSI_SUNESP config ZFCP tristate "FCP host bus adapter driver for IBM eServer zSeries" depends on S390 && QDIO && SCSI - select SCSI_FC_ATTRS + depends on SCSI_FC_ATTRS help If you want to access SCSI devices attached to your IBM eServer zSeries by means of Fibre Channel interfaces say Y. @@ -1750,20 +1701,10 @@ config SCSI_PM8001 This driver supports PMC-Sierra PCIE SAS/SATA 8x6G SPC 8001 chip based host adapters. -config SCSI_SRP - tristate "SCSI RDMA Protocol helper library" - depends on SCSI && PCI - select SCSI_TGT - help - If you wish to use SRP target drivers, say Y. - - To compile this driver as a module, choose M here: the - module will be called libsrp. - config SCSI_BFA_FC tristate "Brocade BFA Fibre Channel Support" depends on PCI && SCSI - select SCSI_FC_ATTRS + depends on SCSI_FC_ATTRS help This bfa driver supports all Brocade PCIe FC/FCOE host adapters. |