diff options
Diffstat (limited to 'drivers/scsi/sd.c')
-rw-r--r-- | drivers/scsi/sd.c | 246 |
1 files changed, 164 insertions, 82 deletions
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 0833b3e6aa6e..2cc73c650ca6 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -1645,36 +1645,35 @@ out: static int sd_sync_cache(struct scsi_disk *sdkp) { - int retries, res; + int res; struct scsi_device *sdp = sdkp->device; const int timeout = sdp->request_queue->rq_timeout * SD_FLUSH_TIMEOUT_MULTIPLIER; + /* Leave the rest of the command zero to indicate flush everything. */ + const unsigned char cmd[16] = { sdp->use_16_for_sync ? + SYNCHRONIZE_CACHE_16 : SYNCHRONIZE_CACHE }; struct scsi_sense_hdr sshdr; + struct scsi_failure failure_defs[] = { + { + .allowed = 3, + .result = SCMD_FAILURE_RESULT_ANY, + }, + {} + }; + struct scsi_failures failures = { + .failure_definitions = failure_defs, + }; const struct scsi_exec_args exec_args = { .req_flags = BLK_MQ_REQ_PM, .sshdr = &sshdr, + .failures = &failures, }; if (!scsi_device_online(sdp)) return -ENODEV; - for (retries = 3; retries > 0; --retries) { - unsigned char cmd[16] = { 0 }; - - if (sdp->use_16_for_sync) - cmd[0] = SYNCHRONIZE_CACHE_16; - else - cmd[0] = SYNCHRONIZE_CACHE; - /* - * Leave the rest of the command zero to indicate - * flush everything. - */ - res = scsi_execute_cmd(sdp, cmd, REQ_OP_DRV_IN, NULL, 0, - timeout, sdkp->max_retries, &exec_args); - if (res == 0) - break; - } - + res = scsi_execute_cmd(sdp, cmd, REQ_OP_DRV_IN, NULL, 0, timeout, + sdkp->max_retries, &exec_args); if (res) { sd_print_result(sdkp, "Synchronize Cache(10) failed", res); @@ -1801,8 +1800,22 @@ static int sd_pr_in_command(struct block_device *bdev, u8 sa, struct scsi_device *sdev = sdkp->device; struct scsi_sense_hdr sshdr; u8 cmd[10] = { PERSISTENT_RESERVE_IN, sa }; + struct scsi_failure failure_defs[] = { + { + .sense = UNIT_ATTENTION, + .asc = SCMD_FAILURE_ASC_ANY, + .ascq = SCMD_FAILURE_ASCQ_ANY, + .allowed = 5, + .result = SAM_STAT_CHECK_CONDITION, + }, + {} + }; + struct scsi_failures failures = { + .failure_definitions = failure_defs, + }; const struct scsi_exec_args exec_args = { .sshdr = &sshdr, + .failures = &failures, }; int result; @@ -1889,8 +1902,22 @@ static int sd_pr_out_command(struct block_device *bdev, u8 sa, u64 key, struct scsi_disk *sdkp = scsi_disk(bdev->bd_disk); struct scsi_device *sdev = sdkp->device; struct scsi_sense_hdr sshdr; + struct scsi_failure failure_defs[] = { + { + .sense = UNIT_ATTENTION, + .asc = SCMD_FAILURE_ASC_ANY, + .ascq = SCMD_FAILURE_ASCQ_ANY, + .allowed = 5, + .result = SAM_STAT_CHECK_CONDITION, + }, + {} + }; + struct scsi_failures failures = { + .failure_definitions = failure_defs, + }; const struct scsi_exec_args exec_args = { .sshdr = &sshdr, + .failures = &failures, }; int result; u8 cmd[16] = { 0, }; @@ -2235,55 +2262,68 @@ static int sd_done(struct scsi_cmnd *SCpnt) static void sd_spinup_disk(struct scsi_disk *sdkp) { - unsigned char cmd[10]; + static const u8 cmd[10] = { TEST_UNIT_READY }; unsigned long spintime_expire = 0; - int retries, spintime; + int spintime, sense_valid = 0; unsigned int the_result; struct scsi_sense_hdr sshdr; + struct scsi_failure failure_defs[] = { + /* Do not retry Medium Not Present */ + { + .sense = UNIT_ATTENTION, + .asc = 0x3A, + .ascq = SCMD_FAILURE_ASCQ_ANY, + .result = SAM_STAT_CHECK_CONDITION, + }, + { + .sense = NOT_READY, + .asc = 0x3A, + .ascq = SCMD_FAILURE_ASCQ_ANY, + .result = SAM_STAT_CHECK_CONDITION, + }, + /* Retry when scsi_status_is_good would return false 3 times */ + { + .result = SCMD_FAILURE_STAT_ANY, + .allowed = 3, + }, + {} + }; + struct scsi_failures failures = { + .failure_definitions = failure_defs, + }; const struct scsi_exec_args exec_args = { .sshdr = &sshdr, + .failures = &failures, }; - int sense_valid = 0; spintime = 0; /* Spin up drives, as required. Only do this at boot time */ /* Spinup needs to be done for module loads too. */ do { - retries = 0; + bool media_was_present = sdkp->media_present; - do { - bool media_was_present = sdkp->media_present; + scsi_failures_reset_retries(&failures); - cmd[0] = TEST_UNIT_READY; - memset((void *) &cmd[1], 0, 9); - - the_result = scsi_execute_cmd(sdkp->device, cmd, - REQ_OP_DRV_IN, NULL, 0, - SD_TIMEOUT, - sdkp->max_retries, - &exec_args); + the_result = scsi_execute_cmd(sdkp->device, cmd, REQ_OP_DRV_IN, + NULL, 0, SD_TIMEOUT, + sdkp->max_retries, &exec_args); - if (the_result > 0) { - /* - * If the drive has indicated to us that it - * doesn't have any media in it, don't bother - * with any more polling. - */ - if (media_not_present(sdkp, &sshdr)) { - if (media_was_present) - sd_printk(KERN_NOTICE, sdkp, - "Media removed, stopped polling\n"); - return; - } - sense_valid = scsi_sense_valid(&sshdr); + if (the_result > 0) { + /* + * If the drive has indicated to us that it doesn't + * have any media in it, don't bother with any more + * polling. + */ + if (media_not_present(sdkp, &sshdr)) { + if (media_was_present) + sd_printk(KERN_NOTICE, sdkp, + "Media removed, stopped polling\n"); + return; } - retries++; - } while (retries < 3 && - (!scsi_status_is_good(the_result) || - (scsi_status_is_check_condition(the_result) && - sense_valid && sshdr.sense_key == UNIT_ATTENTION))); + sense_valid = scsi_sense_valid(&sshdr); + } if (!scsi_status_is_check_condition(the_result)) { /* no sense, TUR either succeeded or failed @@ -2318,14 +2358,16 @@ sd_spinup_disk(struct scsi_disk *sdkp) * Issue command to spin up drive when not ready */ if (!spintime) { + /* Return immediately and start spin cycle */ + const u8 start_cmd[10] = { + [0] = START_STOP, + [1] = 1, + [4] = sdkp->device->start_stop_pwr_cond ? + 0x11 : 1, + }; + sd_printk(KERN_NOTICE, sdkp, "Spinning up disk..."); - cmd[0] = START_STOP; - cmd[1] = 1; /* Return immediately */ - memset((void *) &cmd[2], 0, 8); - cmd[4] = 1; /* Start spin cycle */ - if (sdkp->device->start_stop_pwr_cond) - cmd[4] |= 1 << 4; - scsi_execute_cmd(sdkp->device, cmd, + scsi_execute_cmd(sdkp->device, start_cmd, REQ_OP_DRV_IN, NULL, 0, SD_TIMEOUT, sdkp->max_retries, &exec_args); @@ -2546,42 +2588,58 @@ static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp, static int read_capacity_10(struct scsi_disk *sdkp, struct scsi_device *sdp, unsigned char *buffer) { - unsigned char cmd[16]; + static const u8 cmd[10] = { READ_CAPACITY }; struct scsi_sense_hdr sshdr; + struct scsi_failure failure_defs[] = { + /* Do not retry Medium Not Present */ + { + .sense = UNIT_ATTENTION, + .asc = 0x3A, + .result = SAM_STAT_CHECK_CONDITION, + }, + { + .sense = NOT_READY, + .asc = 0x3A, + .result = SAM_STAT_CHECK_CONDITION, + }, + /* Device reset might occur several times so retry a lot */ + { + .sense = UNIT_ATTENTION, + .asc = 0x29, + .allowed = READ_CAPACITY_RETRIES_ON_RESET, + .result = SAM_STAT_CHECK_CONDITION, + }, + /* Any other error not listed above retry 3 times */ + { + .result = SCMD_FAILURE_RESULT_ANY, + .allowed = 3, + }, + {} + }; + struct scsi_failures failures = { + .failure_definitions = failure_defs, + }; const struct scsi_exec_args exec_args = { .sshdr = &sshdr, + .failures = &failures, }; int sense_valid = 0; int the_result; - int retries = 3, reset_retries = READ_CAPACITY_RETRIES_ON_RESET; sector_t lba; unsigned sector_size; - do { - cmd[0] = READ_CAPACITY; - memset(&cmd[1], 0, 9); - memset(buffer, 0, 8); + memset(buffer, 0, 8); - the_result = scsi_execute_cmd(sdp, cmd, REQ_OP_DRV_IN, buffer, - 8, SD_TIMEOUT, sdkp->max_retries, - &exec_args); + the_result = scsi_execute_cmd(sdp, cmd, REQ_OP_DRV_IN, buffer, + 8, SD_TIMEOUT, sdkp->max_retries, + &exec_args); + + if (the_result > 0) { + sense_valid = scsi_sense_valid(&sshdr); if (media_not_present(sdkp, &sshdr)) return -ENODEV; - - if (the_result > 0) { - sense_valid = scsi_sense_valid(&sshdr); - if (sense_valid && - sshdr.sense_key == UNIT_ATTENTION && - sshdr.asc == 0x29 && sshdr.ascq == 0x00) - /* Device reset might occur several times, - * give it one more chance */ - if (--reset_retries > 0) - continue; - } - retries--; - - } while (the_result && retries); + } if (the_result) { sd_print_result(sdkp, "Read Capacity(10) failed", the_result); @@ -3407,6 +3465,24 @@ static bool sd_validate_opt_xfer_size(struct scsi_disk *sdkp, return true; } +static void sd_read_block_zero(struct scsi_disk *sdkp) +{ + unsigned int buf_len = sdkp->device->sector_size; + char *buffer, cmd[10] = { }; + + buffer = kmalloc(buf_len, GFP_KERNEL); + if (!buffer) + return; + + cmd[0] = READ_10; + put_unaligned_be32(0, &cmd[2]); /* Logical block address 0 */ + put_unaligned_be16(1, &cmd[7]); /* Transfer 1 logical block */ + + scsi_execute_cmd(sdkp->device, cmd, REQ_OP_DRV_IN, buffer, buf_len, + SD_TIMEOUT, sdkp->max_retries, NULL); + kfree(buffer); +} + /** * sd_revalidate_disk - called the first time a new disk is seen, * performs disk spin up, read_capacity, etc. @@ -3446,7 +3522,13 @@ static int sd_revalidate_disk(struct gendisk *disk) */ if (sdkp->media_present) { sd_read_capacity(sdkp, buffer); - + /* + * Some USB/UAS devices return generic values for mode pages + * until the media has been accessed. Trigger a READ operation + * to force the device to populate mode pages. + */ + if (sdp->read_before_ms) + sd_read_block_zero(sdkp); /* * set the default to rotational. All non-rotational devices * support the block characteristics VPD page, which will @@ -3728,7 +3810,7 @@ static int sd_probe(struct device *dev) blk_pm_runtime_init(sdp->request_queue, dev); if (sdp->rpm_autosuspend) { pm_runtime_set_autosuspend_delay(dev, - sdp->host->hostt->rpm_autosuspend_delay); + sdp->host->rpm_autosuspend_delay); } error = device_add_disk(dev, gd, NULL); |