diff options
Diffstat (limited to 'drivers/spi/spi-dw-pci.c')
| -rw-r--r-- | drivers/spi/spi-dw-pci.c | 50 |
1 files changed, 47 insertions, 3 deletions
diff --git a/drivers/spi/spi-dw-pci.c b/drivers/spi/spi-dw-pci.c index 12c131b5fb4e..2ea73809ca34 100644 --- a/drivers/spi/spi-dw-pci.c +++ b/drivers/spi/spi-dw-pci.c @@ -5,7 +5,6 @@ * Copyright (c) 2009, 2014 Intel Corporation. */ -#include <linux/interrupt.h> #include <linux/pci.h> #include <linux/pm_runtime.h> #include <linux/slab.h> @@ -16,6 +15,15 @@ #define DRIVER_NAME "dw_spi_pci" +/* HW info for MRST Clk Control Unit, 32b reg per controller */ +#define MRST_SPI_CLK_BASE 100000000 /* 100m */ +#define MRST_CLK_SPI_REG 0xff11d86c +#define CLK_SPI_BDIV_OFFSET 0 +#define CLK_SPI_BDIV_MASK 0x00000007 +#define CLK_SPI_CDIV_OFFSET 9 +#define CLK_SPI_CDIV_MASK 0x00000e00 +#define CLK_SPI_DISABLE_OFFSET 8 + struct spi_pci_desc { int (*setup)(struct dw_spi *); u16 num_cs; @@ -23,19 +31,55 @@ struct spi_pci_desc { u32 max_freq; }; +static int spi_mid_init(struct dw_spi *dws) +{ + void __iomem *clk_reg; + u32 clk_cdiv; + + clk_reg = ioremap(MRST_CLK_SPI_REG, 16); + if (!clk_reg) + return -ENOMEM; + + /* Get SPI controller operating freq info */ + clk_cdiv = readl(clk_reg + dws->bus_num * sizeof(u32)); + clk_cdiv &= CLK_SPI_CDIV_MASK; + clk_cdiv >>= CLK_SPI_CDIV_OFFSET; + dws->max_freq = MRST_SPI_CLK_BASE / (clk_cdiv + 1); + + iounmap(clk_reg); + + /* Register hook to configure CTRLR0 */ + dws->update_cr0 = dw_spi_update_cr0; + + dw_spi_dma_setup_mfld(dws); + + return 0; +} + +static int spi_generic_init(struct dw_spi *dws) +{ + /* Register hook to configure CTRLR0 */ + dws->update_cr0 = dw_spi_update_cr0; + + dw_spi_dma_setup_generic(dws); + + return 0; +} + static struct spi_pci_desc spi_pci_mid_desc_1 = { - .setup = dw_spi_mid_init, + .setup = spi_mid_init, .num_cs = 5, .bus_num = 0, }; static struct spi_pci_desc spi_pci_mid_desc_2 = { - .setup = dw_spi_mid_init, + .setup = spi_mid_init, .num_cs = 2, .bus_num = 1, }; static struct spi_pci_desc spi_pci_ehl_desc = { + .setup = spi_generic_init, .num_cs = 2, .bus_num = -1, .max_freq = 100000000, |