diff options
Diffstat (limited to 'drivers/staging/wusbcore/wusbhc.c')
-rw-r--r-- | drivers/staging/wusbcore/wusbhc.c | 490 |
1 files changed, 0 insertions, 490 deletions
diff --git a/drivers/staging/wusbcore/wusbhc.c b/drivers/staging/wusbcore/wusbhc.c deleted file mode 100644 index d0b404d258e8..000000000000 --- a/drivers/staging/wusbcore/wusbhc.c +++ /dev/null @@ -1,490 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless USB Host Controller - * sysfs glue, wusbcore module support and life cycle management - * - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * Creation/destruction of wusbhc is split in two parts; that that - * doesn't require the HCD to be added (wusbhc_{create,destroy}) and - * the one that requires (phase B, wusbhc_b_{create,destroy}). - * - * This is so because usb_add_hcd() will start the HC, and thus, all - * the HC specific stuff has to be already initialized (like sysfs - * thingies). - */ -#include <linux/device.h> -#include <linux/module.h> -#include "wusbhc.h" - -/** - * Extract the wusbhc that corresponds to a USB Host Controller class device - * - * WARNING! Apply only if @dev is that of a - * wusbhc.usb_hcd.self->class_dev; otherwise, you loose. - */ -static struct wusbhc *usbhc_dev_to_wusbhc(struct device *dev) -{ - struct usb_bus *usb_bus = dev_get_drvdata(dev); - struct usb_hcd *usb_hcd = bus_to_hcd(usb_bus); - return usb_hcd_to_wusbhc(usb_hcd); -} - -/* - * Show & store the current WUSB trust timeout - * - * We don't do locking--it is an 'atomic' value. - * - * The units that we store/show are always MILLISECONDS. However, the - * value of trust_timeout is jiffies. - */ -static ssize_t wusb_trust_timeout_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); - - return scnprintf(buf, PAGE_SIZE, "%u\n", wusbhc->trust_timeout); -} - -static ssize_t wusb_trust_timeout_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); - ssize_t result = -ENOSYS; - unsigned trust_timeout; - - result = sscanf(buf, "%u", &trust_timeout); - if (result != 1) { - result = -EINVAL; - goto out; - } - wusbhc->trust_timeout = min_t(unsigned, trust_timeout, 500); - cancel_delayed_work(&wusbhc->keep_alive_timer); - flush_workqueue(wusbd); - queue_delayed_work(wusbd, &wusbhc->keep_alive_timer, - msecs_to_jiffies(wusbhc->trust_timeout / 2)); -out: - return result < 0 ? result : size; -} -static DEVICE_ATTR_RW(wusb_trust_timeout); - -/* - * Show the current WUSB CHID. - */ -static ssize_t wusb_chid_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); - const struct wusb_ckhdid *chid; - - if (wusbhc->wuie_host_info != NULL) - chid = &wusbhc->wuie_host_info->CHID; - else - chid = &wusb_ckhdid_zero; - - return sprintf(buf, "%16ph\n", chid->data); -} - -/* - * Store a new CHID. - * - * - Write an all zeros CHID and it will stop the controller - * - Write a non-zero CHID and it will start it. - * - * See wusbhc_chid_set() for more info. - */ -static ssize_t wusb_chid_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); - struct wusb_ckhdid chid; - ssize_t result; - - result = sscanf(buf, - "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx\n", - &chid.data[0] , &chid.data[1] , - &chid.data[2] , &chid.data[3] , - &chid.data[4] , &chid.data[5] , - &chid.data[6] , &chid.data[7] , - &chid.data[8] , &chid.data[9] , - &chid.data[10], &chid.data[11], - &chid.data[12], &chid.data[13], - &chid.data[14], &chid.data[15]); - if (result != 16) { - dev_err(dev, "Unrecognized CHID (need 16 8-bit hex digits): " - "%d\n", (int)result); - return -EINVAL; - } - result = wusbhc_chid_set(wusbhc, &chid); - return result < 0 ? result : size; -} -static DEVICE_ATTR_RW(wusb_chid); - - -static ssize_t wusb_phy_rate_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); - - return sprintf(buf, "%d\n", wusbhc->phy_rate); -} - -static ssize_t wusb_phy_rate_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); - uint8_t phy_rate; - ssize_t result; - - result = sscanf(buf, "%hhu", &phy_rate); - if (result != 1) - return -EINVAL; - if (phy_rate >= UWB_PHY_RATE_INVALID) - return -EINVAL; - - wusbhc->phy_rate = phy_rate; - return size; -} -static DEVICE_ATTR_RW(wusb_phy_rate); - -static ssize_t wusb_dnts_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); - - return sprintf(buf, "num slots: %d\ninterval: %dms\n", - wusbhc->dnts_num_slots, wusbhc->dnts_interval); -} - -static ssize_t wusb_dnts_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); - uint8_t num_slots, interval; - ssize_t result; - - result = sscanf(buf, "%hhu %hhu", &num_slots, &interval); - - if (result != 2) - return -EINVAL; - - wusbhc->dnts_num_slots = num_slots; - wusbhc->dnts_interval = interval; - - return size; -} -static DEVICE_ATTR_RW(wusb_dnts); - -static ssize_t wusb_retry_count_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); - - return sprintf(buf, "%d\n", wusbhc->retry_count); -} - -static ssize_t wusb_retry_count_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); - uint8_t retry_count; - ssize_t result; - - result = sscanf(buf, "%hhu", &retry_count); - - if (result != 1) - return -EINVAL; - - wusbhc->retry_count = max_t(uint8_t, retry_count, - WUSB_RETRY_COUNT_MAX); - - return size; -} -static DEVICE_ATTR_RW(wusb_retry_count); - -/* Group all the WUSBHC attributes */ -static struct attribute *wusbhc_attrs[] = { - &dev_attr_wusb_trust_timeout.attr, - &dev_attr_wusb_chid.attr, - &dev_attr_wusb_phy_rate.attr, - &dev_attr_wusb_dnts.attr, - &dev_attr_wusb_retry_count.attr, - NULL, -}; - -static const struct attribute_group wusbhc_attr_group = { - .name = NULL, /* we want them in the same directory */ - .attrs = wusbhc_attrs, -}; - -/* - * Create a wusbhc instance - * - * NOTEs: - * - * - assumes *wusbhc has been zeroed and wusbhc->usb_hcd has been - * initialized but not added. - * - * - fill out ports_max, mmcies_max and mmcie_{add,rm} before calling. - * - * - fill out wusbhc->uwb_rc and refcount it before calling - * - fill out the wusbhc->sec_modes array - */ -int wusbhc_create(struct wusbhc *wusbhc) -{ - int result = 0; - - /* set defaults. These can be overwritten using sysfs attributes. */ - wusbhc->trust_timeout = WUSB_TRUST_TIMEOUT_MS; - wusbhc->phy_rate = UWB_PHY_RATE_INVALID - 1; - wusbhc->dnts_num_slots = 4; - wusbhc->dnts_interval = 2; - wusbhc->retry_count = WUSB_RETRY_COUNT_INFINITE; - - mutex_init(&wusbhc->mutex); - result = wusbhc_mmcie_create(wusbhc); - if (result < 0) - goto error_mmcie_create; - result = wusbhc_devconnect_create(wusbhc); - if (result < 0) - goto error_devconnect_create; - result = wusbhc_rh_create(wusbhc); - if (result < 0) - goto error_rh_create; - result = wusbhc_sec_create(wusbhc); - if (result < 0) - goto error_sec_create; - return 0; - -error_sec_create: - wusbhc_rh_destroy(wusbhc); -error_rh_create: - wusbhc_devconnect_destroy(wusbhc); -error_devconnect_create: - wusbhc_mmcie_destroy(wusbhc); -error_mmcie_create: - return result; -} -EXPORT_SYMBOL_GPL(wusbhc_create); - -static inline struct kobject *wusbhc_kobj(struct wusbhc *wusbhc) -{ - return &wusbhc->usb_hcd.self.controller->kobj; -} - -/* - * Phase B of a wusbhc instance creation - * - * Creates fields that depend on wusbhc->usb_hcd having been - * added. This is where we create the sysfs files in - * /sys/class/usb_host/usb_hostX/. - * - * NOTE: Assumes wusbhc->usb_hcd has been already added by the upper - * layer (hwahc or whci) - */ -int wusbhc_b_create(struct wusbhc *wusbhc) -{ - int result = 0; - struct device *dev = wusbhc->usb_hcd.self.controller; - - result = sysfs_create_group(wusbhc_kobj(wusbhc), &wusbhc_attr_group); - if (result < 0) { - dev_err(dev, "Cannot register WUSBHC attributes: %d\n", - result); - goto error_create_attr_group; - } - - return 0; -error_create_attr_group: - return result; -} -EXPORT_SYMBOL_GPL(wusbhc_b_create); - -void wusbhc_b_destroy(struct wusbhc *wusbhc) -{ - wusbhc_pal_unregister(wusbhc); - sysfs_remove_group(wusbhc_kobj(wusbhc), &wusbhc_attr_group); -} -EXPORT_SYMBOL_GPL(wusbhc_b_destroy); - -void wusbhc_destroy(struct wusbhc *wusbhc) -{ - wusbhc_sec_destroy(wusbhc); - wusbhc_rh_destroy(wusbhc); - wusbhc_devconnect_destroy(wusbhc); - wusbhc_mmcie_destroy(wusbhc); -} -EXPORT_SYMBOL_GPL(wusbhc_destroy); - -struct workqueue_struct *wusbd; -EXPORT_SYMBOL_GPL(wusbd); - -/* - * WUSB Cluster ID allocation map - * - * Each WUSB bus in a channel is identified with a Cluster Id in the - * unauth address pace (WUSB1.0[4.3]). We take the range 0xe0 to 0xff - * (that's space for 31 WUSB controllers, as 0xff can't be taken). We - * start taking from 0xff, 0xfe, 0xfd... (hence the += or -= 0xff). - * - * For each one we taken, we pin it in the bitap - */ -#define CLUSTER_IDS 32 -static DECLARE_BITMAP(wusb_cluster_id_table, CLUSTER_IDS); -static DEFINE_SPINLOCK(wusb_cluster_ids_lock); - -/* - * Get a WUSB Cluster ID - * - * Need to release with wusb_cluster_id_put() when done w/ it. - */ -/* FIXME: coordinate with the choose_addres() from the USB stack */ -/* we want to leave the top of the 128 range for cluster addresses and - * the bottom for device addresses (as we map them one on one with - * ports). */ -u8 wusb_cluster_id_get(void) -{ - u8 id; - spin_lock(&wusb_cluster_ids_lock); - id = find_first_zero_bit(wusb_cluster_id_table, CLUSTER_IDS); - if (id >= CLUSTER_IDS) { - id = 0; - goto out; - } - set_bit(id, wusb_cluster_id_table); - id = (u8) 0xff - id; -out: - spin_unlock(&wusb_cluster_ids_lock); - return id; - -} -EXPORT_SYMBOL_GPL(wusb_cluster_id_get); - -/* - * Release a WUSB Cluster ID - * - * Obtained it with wusb_cluster_id_get() - */ -void wusb_cluster_id_put(u8 id) -{ - id = 0xff - id; - BUG_ON(id >= CLUSTER_IDS); - spin_lock(&wusb_cluster_ids_lock); - WARN_ON(!test_bit(id, wusb_cluster_id_table)); - clear_bit(id, wusb_cluster_id_table); - spin_unlock(&wusb_cluster_ids_lock); -} -EXPORT_SYMBOL_GPL(wusb_cluster_id_put); - -/** - * wusbhc_giveback_urb - return an URB to the USB core - * @wusbhc: the host controller the URB is from. - * @urb: the URB. - * @status: the URB's status. - * - * Return an URB to the USB core doing some additional WUSB specific - * processing. - * - * - After a successful transfer, update the trust timeout timestamp - * for the WUSB device. - * - * - [WUSB] sections 4.13 and 7.5.1 specify the stop retransmission - * condition for the WCONNECTACK_IE is that the host has observed - * the associated device responding to a control transfer. - */ -void wusbhc_giveback_urb(struct wusbhc *wusbhc, struct urb *urb, int status) -{ - struct wusb_dev *wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, - urb->dev); - - if (status == 0 && wusb_dev) { - wusb_dev->entry_ts = jiffies; - - /* wusbhc_devconnect_acked() can't be called from - atomic context so defer it to a work queue. */ - if (!list_empty(&wusb_dev->cack_node)) - queue_work(wusbd, &wusb_dev->devconnect_acked_work); - else - wusb_dev_put(wusb_dev); - } - - usb_hcd_giveback_urb(&wusbhc->usb_hcd, urb, status); -} -EXPORT_SYMBOL_GPL(wusbhc_giveback_urb); - -/** - * wusbhc_reset_all - reset the HC hardware - * @wusbhc: the host controller to reset. - * - * Request a full hardware reset of the chip. This will also reset - * the radio controller and any other PALs. - */ -void wusbhc_reset_all(struct wusbhc *wusbhc) -{ - if (wusbhc->uwb_rc) - uwb_rc_reset_all(wusbhc->uwb_rc); -} -EXPORT_SYMBOL_GPL(wusbhc_reset_all); - -static struct notifier_block wusb_usb_notifier = { - .notifier_call = wusb_usb_ncb, - .priority = INT_MAX /* Need to be called first of all */ -}; - -static int __init wusbcore_init(void) -{ - int result; - result = wusb_crypto_init(); - if (result < 0) - goto error_crypto_init; - /* WQ is singlethread because we need to serialize notifications */ - wusbd = create_singlethread_workqueue("wusbd"); - if (wusbd == NULL) { - result = -ENOMEM; - printk(KERN_ERR "WUSB-core: Cannot create wusbd workqueue\n"); - goto error_wusbd_create; - } - usb_register_notify(&wusb_usb_notifier); - bitmap_zero(wusb_cluster_id_table, CLUSTER_IDS); - set_bit(0, wusb_cluster_id_table); /* reserve Cluster ID 0xff */ - return 0; - -error_wusbd_create: - wusb_crypto_exit(); -error_crypto_init: - return result; - -} -module_init(wusbcore_init); - -static void __exit wusbcore_exit(void) -{ - clear_bit(0, wusb_cluster_id_table); - if (!bitmap_empty(wusb_cluster_id_table, CLUSTER_IDS)) { - printk(KERN_ERR "BUG: WUSB Cluster IDs not released on exit: %*pb\n", - CLUSTER_IDS, wusb_cluster_id_table); - WARN_ON(1); - } - usb_unregister_notify(&wusb_usb_notifier); - destroy_workqueue(wusbd); - wusb_crypto_exit(); -} -module_exit(wusbcore_exit); - -MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); -MODULE_DESCRIPTION("Wireless USB core"); -MODULE_LICENSE("GPL"); |