aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/drivers/usb/core/hub.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/core/hub.c')
-rw-r--r--drivers/usb/core/hub.c165
1 files changed, 118 insertions, 47 deletions
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 4d3de33885ff..4cf0dc7f330d 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -39,11 +39,14 @@
#define USB_VENDOR_GENESYS_LOGIC 0x05e3
#define USB_VENDOR_SMSC 0x0424
#define USB_PRODUCT_USB5534B 0x5534
+#define USB_VENDOR_CYPRESS 0x04b4
+#define USB_PRODUCT_CY7C65632 0x6570
#define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND 0x01
#define HUB_QUIRK_DISABLE_AUTOSUSPEND 0x02
#define USB_TP_TRANSMISSION_DELAY 40 /* ns */
#define USB_TP_TRANSMISSION_DELAY_MAX 65535 /* ns */
+#define USB_PING_RESPONSE_TIME 400 /* ns */
/* Protect struct usb_device->state and ->children members
* Note: Both are also protected by ->dev.sem, except that ->state can
@@ -178,8 +181,9 @@ int usb_device_supports_lpm(struct usb_device *udev)
}
/*
- * Set the Maximum Exit Latency (MEL) for the host to initiate a transition from
- * either U1 or U2.
+ * Set the Maximum Exit Latency (MEL) for the host to wakup up the path from
+ * U1/U2, send a PING to the device and receive a PING_RESPONSE.
+ * See USB 3.1 section C.1.5.2
*/
static void usb_set_lpm_mel(struct usb_device *udev,
struct usb3_lpm_parameters *udev_lpm_params,
@@ -189,35 +193,37 @@ static void usb_set_lpm_mel(struct usb_device *udev,
unsigned int hub_exit_latency)
{
unsigned int total_mel;
- unsigned int device_mel;
- unsigned int hub_mel;
/*
- * Calculate the time it takes to transition all links from the roothub
- * to the parent hub into U0. The parent hub must then decode the
- * packet (hub header decode latency) to figure out which port it was
- * bound for.
- *
- * The Hub Header decode latency is expressed in 0.1us intervals (0x1
- * means 0.1us). Multiply that by 100 to get nanoseconds.
+ * tMEL1. time to transition path from host to device into U0.
+ * MEL for parent already contains the delay up to parent, so only add
+ * the exit latency for the last link (pick the slower exit latency),
+ * and the hub header decode latency. See USB 3.1 section C 2.2.1
+ * Store MEL in nanoseconds
*/
total_mel = hub_lpm_params->mel +
- (hub->descriptor->u.ss.bHubHdrDecLat * 100);
+ max(udev_exit_latency, hub_exit_latency) * 1000 +
+ hub->descriptor->u.ss.bHubHdrDecLat * 100;
/*
- * How long will it take to transition the downstream hub's port into
- * U0? The greater of either the hub exit latency or the device exit
- * latency.
- *
- * The BOS U1/U2 exit latencies are expressed in 1us intervals.
- * Multiply that by 1000 to get nanoseconds.
+ * tMEL2. Time to submit PING packet. Sum of tTPTransmissionDelay for
+ * each link + wHubDelay for each hub. Add only for last link.
+ * tMEL4, the time for PING_RESPONSE to traverse upstream is similar.
+ * Multiply by 2 to include it as well.
*/
- device_mel = udev_exit_latency * 1000;
- hub_mel = hub_exit_latency * 1000;
- if (device_mel > hub_mel)
- total_mel += device_mel;
- else
- total_mel += hub_mel;
+ total_mel += (__le16_to_cpu(hub->descriptor->u.ss.wHubDelay) +
+ USB_TP_TRANSMISSION_DELAY) * 2;
+
+ /*
+ * tMEL3, tPingResponse. Time taken by device to generate PING_RESPONSE
+ * after receiving PING. Also add 2100ns as stated in USB 3.1 C 1.5.2.4
+ * to cover the delay if the PING_RESPONSE is queued behind a Max Packet
+ * Size DP.
+ * Note these delays should be added only once for the entire path, so
+ * add them to the MEL of the device connected to the roothub.
+ */
+ if (!hub->hdev->parent)
+ total_mel += USB_PING_RESPONSE_TIME + 2100;
udev_lpm_params->mel = total_mel;
}
@@ -1102,7 +1108,10 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
} else {
hub_power_on(hub, true);
}
- }
+ /* Give some time on remote wakeup to let links to transit to U0 */
+ } else if (hub_is_superspeed(hub->hdev))
+ msleep(20);
+
init2:
/*
@@ -1217,7 +1226,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
*/
if (portchange || (hub_is_superspeed(hub->hdev) &&
port_resumed))
- set_bit(port1, hub->change_bits);
+ set_bit(port1, hub->event_bits);
} else if (udev->persist_enabled) {
#ifdef CONFIG_PM
@@ -3537,7 +3546,7 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
u16 portchange, portstatus;
if (!test_and_set_bit(port1, hub->child_usage_bits)) {
- status = pm_runtime_get_sync(&port_dev->dev);
+ status = pm_runtime_resume_and_get(&port_dev->dev);
if (status < 0) {
dev_dbg(&udev->dev, "can't resume usb port, status %d\n",
status);
@@ -3574,9 +3583,6 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
* sequence.
*/
status = hub_port_status(hub, port1, &portstatus, &portchange);
-
- /* TRSMRCY = 10 msec */
- msleep(10);
}
SuspendCleared:
@@ -3591,6 +3597,9 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
usb_clear_port_feature(hub->hdev, port1,
USB_PORT_FEAT_C_SUSPEND);
}
+
+ /* TRSMRCY = 10 msec */
+ msleep(10);
}
if (udev->persist_enabled)
@@ -4021,6 +4030,47 @@ static int usb_set_lpm_timeout(struct usb_device *udev,
}
/*
+ * Don't allow device intiated U1/U2 if the system exit latency + one bus
+ * interval is greater than the minimum service interval of any active
+ * periodic endpoint. See USB 3.2 section 9.4.9
+ */
+static bool usb_device_may_initiate_lpm(struct usb_device *udev,
+ enum usb3_link_state state)
+{
+ unsigned int sel; /* us */
+ int i, j;
+
+ if (state == USB3_LPM_U1)
+ sel = DIV_ROUND_UP(udev->u1_params.sel, 1000);
+ else if (state == USB3_LPM_U2)
+ sel = DIV_ROUND_UP(udev->u2_params.sel, 1000);
+ else
+ return false;
+
+ for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
+ struct usb_interface *intf;
+ struct usb_endpoint_descriptor *desc;
+ unsigned int interval;
+
+ intf = udev->actconfig->interface[i];
+ if (!intf)
+ continue;
+
+ for (j = 0; j < intf->cur_altsetting->desc.bNumEndpoints; j++) {
+ desc = &intf->cur_altsetting->endpoint[j].desc;
+
+ if (usb_endpoint_xfer_int(desc) ||
+ usb_endpoint_xfer_isoc(desc)) {
+ interval = (1 << (desc->bInterval - 1)) * 125;
+ if (sel + 125 > interval)
+ return false;
+ }
+ }
+ }
+ return true;
+}
+
+/*
* Enable the hub-initiated U1/U2 idle timeouts, and enable device-initiated
* U1/U2 entry.
*
@@ -4092,20 +4142,23 @@ static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev,
* U1/U2_ENABLE
*/
if (udev->actconfig &&
- usb_set_device_initiated_lpm(udev, state, true) == 0) {
- if (state == USB3_LPM_U1)
- udev->usb3_lpm_u1_enabled = 1;
- else if (state == USB3_LPM_U2)
- udev->usb3_lpm_u2_enabled = 1;
- } else {
- /* Don't request U1/U2 entry if the device
- * cannot transition to U1/U2.
- */
- usb_set_lpm_timeout(udev, state, 0);
- hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state);
+ usb_device_may_initiate_lpm(udev, state)) {
+ if (usb_set_device_initiated_lpm(udev, state, true)) {
+ /*
+ * Request to enable device initiated U1/U2 failed,
+ * better to turn off lpm in this case.
+ */
+ usb_set_lpm_timeout(udev, state, 0);
+ hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state);
+ return;
+ }
}
-}
+ if (state == USB3_LPM_U1)
+ udev->usb3_lpm_u1_enabled = 1;
+ else if (state == USB3_LPM_U2)
+ udev->usb3_lpm_u2_enabled = 1;
+}
/*
* Disable the hub-initiated U1/U2 idle timeouts, and disable device-initiated
* U1/U2 entry.
@@ -4559,8 +4612,6 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1,
if (oldspeed == USB_SPEED_LOW)
delay = HUB_LONG_RESET_TIME;
- mutex_lock(hcd->address0_mutex);
-
/* Reset the device; full speed may morph to high speed */
/* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */
retval = hub_port_reset(hub, port1, udev, delay, false);
@@ -4875,7 +4926,6 @@ fail:
hub_port_disable(hub, port1, 0);
update_devnum(udev, devnum); /* for disconnect processing */
}
- mutex_unlock(hcd->address0_mutex);
return retval;
}
@@ -4965,6 +5015,7 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
struct usb_port *port_dev = hub->ports[port1 - 1];
struct usb_device *udev = port_dev->child;
static int unreliable_port = -1;
+ bool retry_locked;
/* Disconnect any existing devices under this port */
if (udev) {
@@ -5020,7 +5071,11 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
unit_load = 100;
status = 0;
+
for (i = 0; i < SET_CONFIG_TRIES; i++) {
+ usb_lock_port(port_dev);
+ mutex_lock(hcd->address0_mutex);
+ retry_locked = true;
/* reallocate for each attempt, since references
* to the previous one can escape in various ways
@@ -5029,6 +5084,8 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
if (!udev) {
dev_err(&port_dev->dev,
"couldn't allocate usb_device\n");
+ mutex_unlock(hcd->address0_mutex);
+ usb_unlock_port(port_dev);
goto done;
}
@@ -5050,12 +5107,14 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
}
/* reset (non-USB 3.0 devices) and get descriptor */
- usb_lock_port(port_dev);
status = hub_port_init(hub, udev, port1, i);
- usb_unlock_port(port_dev);
if (status < 0)
goto loop;
+ mutex_unlock(hcd->address0_mutex);
+ usb_unlock_port(port_dev);
+ retry_locked = false;
+
if (udev->quirks & USB_QUIRK_DELAY_INIT)
msleep(2000);
@@ -5148,6 +5207,10 @@ loop:
usb_ep0_reinit(udev);
release_devnum(udev);
hub_free_dev(udev);
+ if (retry_locked) {
+ mutex_unlock(hcd->address0_mutex);
+ usb_unlock_port(port_dev);
+ }
usb_put_dev(udev);
if ((status == -ENOTCONN) || (status == -ENOTSUPP))
break;
@@ -5515,6 +5578,11 @@ static const struct usb_device_id hub_id_table[] = {
.bInterfaceClass = USB_CLASS_HUB,
.driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND},
{ .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+ | USB_DEVICE_ID_MATCH_PRODUCT,
+ .idVendor = USB_VENDOR_CYPRESS,
+ .idProduct = USB_PRODUCT_CY7C65632,
+ .driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND},
+ { .match_flags = USB_DEVICE_ID_MATCH_VENDOR
| USB_DEVICE_ID_MATCH_INT_CLASS,
.idVendor = USB_VENDOR_GENESYS_LOGIC,
.bInterfaceClass = USB_CLASS_HUB,
@@ -5739,6 +5807,8 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
bos = udev->bos;
udev->bos = NULL;
+ mutex_lock(hcd->address0_mutex);
+
for (i = 0; i < SET_CONFIG_TRIES; ++i) {
/* ep0 maxpacket size may change; let the HCD know about it.
@@ -5748,6 +5818,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
if (ret >= 0 || ret == -ENOTCONN || ret == -ENODEV)
break;
}
+ mutex_unlock(hcd->address0_mutex);
if (ret < 0)
goto re_enumerate;
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.