diff options
Diffstat (limited to 'drivers/usb/mtu3/mtu3_core.c')
| -rw-r--r-- | drivers/usb/mtu3/mtu3_core.c | 20 |
1 files changed, 9 insertions, 11 deletions
diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c index ae70b9bfd797..4fee200795a5 100644 --- a/drivers/usb/mtu3/mtu3_core.c +++ b/drivers/usb/mtu3/mtu3_core.c @@ -180,7 +180,7 @@ static void mtu3_intr_enable(struct mtu3 *mtu) mtu3_writel(mbase, U3D_LV1IESR, value); /* Enable U2 common USB interrupts */ - value = SUSPEND_INTR | RESUME_INTR | RESET_INTR | LPM_RESUME_INTR; + value = SUSPEND_INTR | RESUME_INTR | RESET_INTR; mtu3_writel(mbase, U3D_COMMON_USB_INTR_ENABLE, value); if (mtu->is_u3_ip) { @@ -484,7 +484,7 @@ void mtu3_ep0_setup(struct mtu3 *mtu) mtu3_writel(mtu->mac_base, U3D_EP0CSR, csr); /* Enable EP0 interrupt */ - mtu3_writel(mtu->mac_base, U3D_EPIESR, EP0ISR); + mtu3_writel(mtu->mac_base, U3D_EPIESR, EP0ISR | SETUPENDISR); } static int mtu3_mem_alloc(struct mtu3 *mtu) @@ -578,12 +578,16 @@ static void mtu3_regs_init(struct mtu3 *mtu) if (mtu->is_u3_ip) { /* disable LGO_U1/U2 by default */ mtu3_clrbits(mbase, U3D_LINK_POWER_CONTROL, - SW_U1_ACCEPT_ENABLE | SW_U2_ACCEPT_ENABLE | SW_U1_REQUEST_ENABLE | SW_U2_REQUEST_ENABLE); + /* enable accept LGO_U1/U2 link command from host */ + mtu3_setbits(mbase, U3D_LINK_POWER_CONTROL, + SW_U1_ACCEPT_ENABLE | SW_U2_ACCEPT_ENABLE); /* device responses to u3_exit from host automatically */ mtu3_clrbits(mbase, U3D_LTSSM_CTRL, SOFT_U3_EXIT_EN); /* automatically build U2 link when U3 detect fail */ mtu3_setbits(mbase, U3D_USB2_TEST_MODE, U2U3_AUTO_SWITCH); + /* auto clear SOFT_CONN when clear USB3_EN if work as HS */ + mtu3_setbits(mbase, U3D_U3U2_SWITCH_CTRL, SOFTCON_CLR_AUTO_EN); } mtu3_set_speed(mtu); @@ -592,10 +596,10 @@ static void mtu3_regs_init(struct mtu3 *mtu) mtu3_clrbits(mbase, U3D_LINK_RESET_INFO, WTCHRP_MSK); /* U2/U3 detected by HW */ mtu3_writel(mbase, U3D_DEVICE_CONF, 0); - /* enable QMU 16B checksum */ - mtu3_setbits(mbase, U3D_QCR0, QMU_CS16B_EN); /* vbus detected by HW */ mtu3_clrbits(mbase, U3D_MISC_CTRL, VBUS_FRC_EN | VBUS_ON); + /* enable automatical HWRW from L1 */ + mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, LPM_HRWE); } static irqreturn_t mtu3_link_isr(struct mtu3 *mtu) @@ -708,12 +712,6 @@ static irqreturn_t mtu3_u2_common_isr(struct mtu3 *mtu) if (u2comm & RESET_INTR) mtu3_gadget_reset(mtu); - if (u2comm & LPM_RESUME_INTR) { - if (!(mtu3_readl(mbase, U3D_POWER_MANAGEMENT) & LPM_HRWE)) - mtu3_setbits(mbase, U3D_USB20_MISC_CONTROL, - LPM_U3_ACK_EN); - } - return IRQ_HANDLED; } |