diff options
Diffstat (limited to 'drivers/usb/serial/ftdi_sio.c')
| -rw-r--r-- | drivers/usb/serial/ftdi_sio.c | 77 |
1 files changed, 18 insertions, 59 deletions
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index d38780fa8788..1cec03799cdf 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -809,10 +809,10 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(FTDI_VID, FTDI_PROPOX_ISPCABLEIII_PID) }, { USB_DEVICE(FTDI_VID, CYBER_CORTEX_AV_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, - { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID), - .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, - { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID), - .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID, 1) }, + { USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID, 1) }, + { USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_TINY_PID, 1) }, + { USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_TINY_H_PID, 1) }, { USB_DEVICE(FIC_VID, FIC_NEO1973_DEBUG_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(FTDI_VID, FTDI_OOCDLINK_PID), @@ -1244,42 +1244,13 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty, int div_okay = 1; int baud; - /* - * The logic involved in setting the baudrate can be cleanly split into - * 3 steps. - * 1. Standard baud rates are set in tty->termios->c_cflag - * 2. If these are not enough, you can set any speed using alt_speed as - * follows: - * - set tty->termios->c_cflag speed to B38400 - * - set your real speed in tty->alt_speed; it gets ignored when - * alt_speed==0, (or) - * - call TIOCSSERIAL ioctl with (struct serial_struct) set as - * follows: - * flags & ASYNC_SPD_MASK == ASYNC_SPD_[HI, VHI, SHI, WARP], - * this just sets alt_speed to (HI: 57600, VHI: 115200, - * SHI: 230400, WARP: 460800) - * ** Steps 1, 2 are done courtesy of tty_get_baud_rate - * 3. You can also set baud rate by setting custom divisor as follows - * - set tty->termios->c_cflag speed to B38400 - * - call TIOCSSERIAL ioctl with (struct serial_struct) set as - * follows: - * o flags & ASYNC_SPD_MASK == ASYNC_SPD_CUST - * o custom_divisor set to baud_base / your_new_baudrate - * ** Step 3 is done courtesy of code borrowed from serial.c - * I should really spend some time and separate + move this common - * code to serial.c, it is replicated in nearly every serial driver - * you see. - */ - - /* 1. Get the baud rate from the tty settings, this observes - alt_speed hack */ - baud = tty_get_baud_rate(tty); dev_dbg(dev, "%s - tty_get_baud_rate reports speed %d\n", __func__, baud); - /* 2. Observe async-compatible custom_divisor hack, update baudrate - if needed */ - + /* + * Observe deprecated async-compatible custom_divisor hack, update + * baudrate if needed. + */ if (baud == 38400 && ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) && (priv->custom_divisor)) { @@ -1288,8 +1259,6 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty, __func__, priv->custom_divisor, baud); } - /* 3. Convert baudrate to device-specific divisor */ - if (!baud) baud = 9600; switch (priv->chip_type) { @@ -1505,8 +1474,7 @@ static int set_serial_info(struct tty_struct *tty, /* Do error checking and permission checking */ if (!capable(CAP_SYS_ADMIN)) { - if (((new_serial.flags & ~ASYNC_USR_MASK) != - (priv->flags & ~ASYNC_USR_MASK))) { + if ((new_serial.flags ^ priv->flags) & ~ASYNC_USR_MASK) { mutex_unlock(&priv->cfg_lock); return -EPERM; } @@ -1527,26 +1495,17 @@ static int set_serial_info(struct tty_struct *tty, (new_serial.flags & ASYNC_FLAGS)); priv->custom_divisor = new_serial.custom_divisor; +check_and_exit: write_latency_timer(port); -check_and_exit: - if ((old_priv.flags & ASYNC_SPD_MASK) != - (priv->flags & ASYNC_SPD_MASK)) { - if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - tty->alt_speed = 57600; - else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - tty->alt_speed = 115200; - else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) - tty->alt_speed = 230400; - else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) - tty->alt_speed = 460800; - else - tty->alt_speed = 0; - } - if (((old_priv.flags & ASYNC_SPD_MASK) != - (priv->flags & ASYNC_SPD_MASK)) || - (((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) && - (old_priv.custom_divisor != priv->custom_divisor))) { + if ((priv->flags ^ old_priv.flags) & ASYNC_SPD_MASK || + ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST && + priv->custom_divisor != old_priv.custom_divisor)) { + + /* warn about deprecation unless clearing */ + if (priv->flags & ASYNC_SPD_MASK) + dev_warn_ratelimited(&port->dev, "use of SPD flags is deprecated\n"); + change_speed(tty, port); mutex_unlock(&priv->cfg_lock); } |