diff options
Diffstat (limited to 'include/linux/gpio/regmap.h')
| -rw-r--r-- | include/linux/gpio/regmap.h | 86 |
1 files changed, 86 insertions, 0 deletions
diff --git a/include/linux/gpio/regmap.h b/include/linux/gpio/regmap.h new file mode 100644 index 000000000000..4c1e6b34e824 --- /dev/null +++ b/include/linux/gpio/regmap.h @@ -0,0 +1,86 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef _LINUX_GPIO_REGMAP_H +#define _LINUX_GPIO_REGMAP_H + +struct device; +struct gpio_regmap; +struct irq_domain; +struct regmap; + +#define GPIO_REGMAP_ADDR_ZERO ((unsigned long)(-1)) +#define GPIO_REGMAP_ADDR(addr) ((addr) ? : GPIO_REGMAP_ADDR_ZERO) + +/** + * struct gpio_regmap_config - Description of a generic regmap gpio_chip. + * @parent: The parent device + * @regmap: The regmap used to access the registers + * given, the name of the device is used + * @label: (Optional) Descriptive name for GPIO controller. + * If not given, the name of the device is used. + * @ngpio: Number of GPIOs + * @names: (Optional) Array of names for gpios + * @reg_dat_base: (Optional) (in) register base address + * @reg_set_base: (Optional) set register base address + * @reg_clr_base: (Optional) clear register base address + * @reg_dir_in_base: (Optional) in setting register base address + * @reg_dir_out_base: (Optional) out setting register base address + * @reg_stride: (Optional) May be set if the registers (of the + * same type, dat, set, etc) are not consecutive. + * @ngpio_per_reg: Number of GPIOs per register + * @irq_domain: (Optional) IRQ domain if the controller is + * interrupt-capable + * @reg_mask_xlate: (Optional) Translates base address and GPIO + * offset to a register/bitmask pair. If not + * given the default gpio_regmap_simple_xlate() + * is used. + * + * The ->reg_mask_xlate translates a given base address and GPIO offset to + * register and mask pair. The base address is one of the given register + * base addresses in this structure. + * + * Although all register base addresses are marked as optional, there are + * several rules: + * 1. if you only have @reg_dat_base set, then it is input-only + * 2. if you only have @reg_set_base set, then it is output-only + * 3. if you have either @reg_dir_in_base or @reg_dir_out_base set, then + * you have to set both @reg_dat_base and @reg_set_base + * 4. if you have @reg_set_base set, you may also set @reg_clr_base to have + * two different registers for setting and clearing the output. This is + * also valid for the output-only case. + * 5. @reg_dir_in_base and @reg_dir_out_base are exclusive; is there really + * hardware which has redundant registers? + * + * Note: All base addresses may have the special value %GPIO_REGMAP_ADDR_ZERO + * which forces the address to the value 0. + */ +struct gpio_regmap_config { + struct device *parent; + struct regmap *regmap; + + const char *label; + int ngpio; + const char *const *names; + + unsigned int reg_dat_base; + unsigned int reg_set_base; + unsigned int reg_clr_base; + unsigned int reg_dir_in_base; + unsigned int reg_dir_out_base; + int reg_stride; + int ngpio_per_reg; + struct irq_domain *irq_domain; + + int (*reg_mask_xlate)(struct gpio_regmap *gpio, unsigned int base, + unsigned int offset, unsigned int *reg, + unsigned int *mask); +}; + +struct gpio_regmap *gpio_regmap_register(const struct gpio_regmap_config *config); +void gpio_regmap_unregister(struct gpio_regmap *gpio); +struct gpio_regmap *devm_gpio_regmap_register(struct device *dev, + const struct gpio_regmap_config *config); +void gpio_regmap_set_drvdata(struct gpio_regmap *gpio, void *data); +void *gpio_regmap_get_drvdata(struct gpio_regmap *gpio); + +#endif /* _LINUX_GPIO_REGMAP_H */ |