diff options
Diffstat (limited to 'kernel/dma/swiotlb.c')
| -rw-r--r-- | kernel/dma/swiotlb.c | 154 |
1 files changed, 107 insertions, 47 deletions
diff --git a/kernel/dma/swiotlb.c b/kernel/dma/swiotlb.c index 86fe172b5958..fe1ccb53596f 100644 --- a/kernel/dma/swiotlb.c +++ b/kernel/dma/swiotlb.c @@ -69,11 +69,14 @@ * @alloc_size: Size of the allocated buffer. * @list: The free list describing the number of free entries available * from each index. + * @pad_slots: Number of preceding padding slots. Valid only in the first + * allocated non-padding slot. */ struct io_tlb_slot { phys_addr_t orig_addr; size_t alloc_size; - unsigned int list; + unsigned short list; + unsigned short pad_slots; }; static bool swiotlb_force_bounce; @@ -287,6 +290,7 @@ static void swiotlb_init_io_tlb_pool(struct io_tlb_pool *mem, phys_addr_t start, mem->nslabs - i); mem->slots[i].orig_addr = INVALID_PHYS_ADDR; mem->slots[i].alloc_size = 0; + mem->slots[i].pad_slots = 0; } memset(vaddr, 0, bytes); @@ -821,12 +825,30 @@ void swiotlb_dev_init(struct device *dev) #endif } -/* - * Return the offset into a iotlb slot required to keep the device happy. +/** + * swiotlb_align_offset() - Get required offset into an IO TLB allocation. + * @dev: Owning device. + * @align_mask: Allocation alignment mask. + * @addr: DMA address. + * + * Return the minimum offset from the start of an IO TLB allocation which is + * required for a given buffer address and allocation alignment to keep the + * device happy. + * + * First, the address bits covered by min_align_mask must be identical in the + * original address and the bounce buffer address. High bits are preserved by + * choosing a suitable IO TLB slot, but bits below IO_TLB_SHIFT require extra + * padding bytes before the bounce buffer. + * + * Second, @align_mask specifies which bits of the first allocated slot must + * be zero. This may require allocating additional padding slots, and then the + * offset (in bytes) from the first such padding slot is returned. */ -static unsigned int swiotlb_align_offset(struct device *dev, u64 addr) +static unsigned int swiotlb_align_offset(struct device *dev, + unsigned int align_mask, u64 addr) { - return addr & dma_get_min_align_mask(dev) & (IO_TLB_SIZE - 1); + return addr & dma_get_min_align_mask(dev) & + (align_mask | (IO_TLB_SIZE - 1)); } /* @@ -841,27 +863,23 @@ static void swiotlb_bounce(struct device *dev, phys_addr_t tlb_addr, size_t size size_t alloc_size = mem->slots[index].alloc_size; unsigned long pfn = PFN_DOWN(orig_addr); unsigned char *vaddr = mem->vaddr + tlb_addr - mem->start; - unsigned int tlb_offset, orig_addr_offset; + int tlb_offset; if (orig_addr == INVALID_PHYS_ADDR) return; - tlb_offset = tlb_addr & (IO_TLB_SIZE - 1); - orig_addr_offset = swiotlb_align_offset(dev, orig_addr); - if (tlb_offset < orig_addr_offset) { - dev_WARN_ONCE(dev, 1, - "Access before mapping start detected. orig offset %u, requested offset %u.\n", - orig_addr_offset, tlb_offset); - return; - } - - tlb_offset -= orig_addr_offset; - if (tlb_offset > alloc_size) { - dev_WARN_ONCE(dev, 1, - "Buffer overflow detected. Allocation size: %zu. Mapping size: %zu+%u.\n", - alloc_size, size, tlb_offset); - return; - } + /* + * It's valid for tlb_offset to be negative. This can happen when the + * "offset" returned by swiotlb_align_offset() is non-zero, and the + * tlb_addr is pointing within the first "offset" bytes of the second + * or subsequent slots of the allocated swiotlb area. While it's not + * valid for tlb_addr to be pointing within the first "offset" bytes + * of the first slot, there's no way to check for such an error since + * this function can't distinguish the first slot from the second and + * subsequent slots. + */ + tlb_offset = (tlb_addr & (IO_TLB_SIZE - 1)) - + swiotlb_align_offset(dev, 0, orig_addr); orig_addr += tlb_offset; alloc_size -= tlb_offset; @@ -1005,7 +1023,7 @@ static int swiotlb_search_pool_area(struct device *dev, struct io_tlb_pool *pool unsigned long max_slots = get_max_slots(boundary_mask); unsigned int iotlb_align_mask = dma_get_min_align_mask(dev); unsigned int nslots = nr_slots(alloc_size), stride; - unsigned int offset = swiotlb_align_offset(dev, orig_addr); + unsigned int offset = swiotlb_align_offset(dev, 0, orig_addr); unsigned int index, slots_checked, count = 0, i; unsigned long flags; unsigned int slot_base; @@ -1322,17 +1340,43 @@ static unsigned long mem_used(struct io_tlb_mem *mem) #endif /* CONFIG_DEBUG_FS */ +/** + * swiotlb_tbl_map_single() - bounce buffer map a single contiguous physical area + * @dev: Device which maps the buffer. + * @orig_addr: Original (non-bounced) physical IO buffer address + * @mapping_size: Requested size of the actual bounce buffer, excluding + * any pre- or post-padding for alignment + * @alloc_align_mask: Required start and end alignment of the allocated buffer + * @dir: DMA direction + * @attrs: Optional DMA attributes for the map operation + * + * Find and allocate a suitable sequence of IO TLB slots for the request. + * The allocated space starts at an alignment specified by alloc_align_mask, + * and the size of the allocated space is rounded up so that the total amount + * of allocated space is a multiple of (alloc_align_mask + 1). If + * alloc_align_mask is zero, the allocated space may be at any alignment and + * the size is not rounded up. + * + * The returned address is within the allocated space and matches the bits + * of orig_addr that are specified in the DMA min_align_mask for the device. As + * such, this returned address may be offset from the beginning of the allocated + * space. The bounce buffer space starting at the returned address for + * mapping_size bytes is initialized to the contents of the original IO buffer + * area. Any pre-padding (due to an offset) and any post-padding (due to + * rounding-up the size) is not initialized. + */ phys_addr_t swiotlb_tbl_map_single(struct device *dev, phys_addr_t orig_addr, - size_t mapping_size, size_t alloc_size, - unsigned int alloc_align_mask, enum dma_data_direction dir, - unsigned long attrs) + size_t mapping_size, unsigned int alloc_align_mask, + enum dma_data_direction dir, unsigned long attrs) { struct io_tlb_mem *mem = dev->dma_io_tlb_mem; - unsigned int offset = swiotlb_align_offset(dev, orig_addr); + unsigned int offset; struct io_tlb_pool *pool; unsigned int i; + size_t size; int index; phys_addr_t tlb_addr; + unsigned short pad_slots; if (!mem || !mem->nslabs) { dev_warn_ratelimited(dev, @@ -1343,28 +1387,43 @@ phys_addr_t swiotlb_tbl_map_single(struct device *dev, phys_addr_t orig_addr, if (cc_platform_has(CC_ATTR_MEM_ENCRYPT)) pr_warn_once("Memory encryption is active and system is using DMA bounce buffers\n"); - if (mapping_size > alloc_size) { - dev_warn_once(dev, "Invalid sizes (mapping: %zd bytes, alloc: %zd bytes)", - mapping_size, alloc_size); - return (phys_addr_t)DMA_MAPPING_ERROR; - } + /* + * The default swiotlb memory pool is allocated with PAGE_SIZE + * alignment. If a mapping is requested with larger alignment, + * the mapping may be unable to use the initial slot(s) in all + * sets of IO_TLB_SEGSIZE slots. In such case, a mapping request + * of or near the maximum mapping size would always fail. + */ + dev_WARN_ONCE(dev, alloc_align_mask > ~PAGE_MASK, + "Alloc alignment may prevent fulfilling requests with max mapping_size\n"); - index = swiotlb_find_slots(dev, orig_addr, - alloc_size + offset, alloc_align_mask, &pool); + offset = swiotlb_align_offset(dev, alloc_align_mask, orig_addr); + size = ALIGN(mapping_size + offset, alloc_align_mask + 1); + index = swiotlb_find_slots(dev, orig_addr, size, alloc_align_mask, &pool); if (index == -1) { if (!(attrs & DMA_ATTR_NO_WARN)) dev_warn_ratelimited(dev, "swiotlb buffer is full (sz: %zd bytes), total %lu (slots), used %lu (slots)\n", - alloc_size, mem->nslabs, mem_used(mem)); + size, mem->nslabs, mem_used(mem)); return (phys_addr_t)DMA_MAPPING_ERROR; } /* + * If dma_skip_sync was set, reset it on first SWIOTLB buffer + * mapping to always sync SWIOTLB buffers. + */ + dma_reset_need_sync(dev); + + /* * Save away the mapping from the original address to the DMA address. * This is needed when we sync the memory. Then we sync the buffer if * needed. */ - for (i = 0; i < nr_slots(alloc_size + offset); i++) + pad_slots = offset >> IO_TLB_SHIFT; + offset &= (IO_TLB_SIZE - 1); + index += pad_slots; + pool->slots[index].pad_slots = pad_slots; + for (i = 0; i < (nr_slots(size) - pad_slots); i++) pool->slots[index + i].orig_addr = slot_addr(orig_addr, i); tlb_addr = slot_addr(pool->start, index) + offset; /* @@ -1384,13 +1443,17 @@ static void swiotlb_release_slots(struct device *dev, phys_addr_t tlb_addr) { struct io_tlb_pool *mem = swiotlb_find_pool(dev, tlb_addr); unsigned long flags; - unsigned int offset = swiotlb_align_offset(dev, tlb_addr); - int index = (tlb_addr - offset - mem->start) >> IO_TLB_SHIFT; - int nslots = nr_slots(mem->slots[index].alloc_size + offset); - int aindex = index / mem->area_nslabs; - struct io_tlb_area *area = &mem->areas[aindex]; + unsigned int offset = swiotlb_align_offset(dev, 0, tlb_addr); + int index, nslots, aindex; + struct io_tlb_area *area; int count, i; + index = (tlb_addr - offset - mem->start) >> IO_TLB_SHIFT; + index -= mem->slots[index].pad_slots; + nslots = nr_slots(mem->slots[index].alloc_size + offset); + aindex = index / mem->area_nslabs; + area = &mem->areas[aindex]; + /* * Return the buffer to the free list by setting the corresponding * entries to indicate the number of contiguous entries available. @@ -1413,6 +1476,7 @@ static void swiotlb_release_slots(struct device *dev, phys_addr_t tlb_addr) mem->slots[i].list = ++count; mem->slots[i].orig_addr = INVALID_PHYS_ADDR; mem->slots[i].alloc_size = 0; + mem->slots[i].pad_slots = 0; } /* @@ -1514,8 +1578,7 @@ dma_addr_t swiotlb_map(struct device *dev, phys_addr_t paddr, size_t size, trace_swiotlb_bounced(dev, phys_to_dma(dev, paddr), size); - swiotlb_addr = swiotlb_tbl_map_single(dev, paddr, size, size, 0, dir, - attrs); + swiotlb_addr = swiotlb_tbl_map_single(dev, paddr, size, 0, dir, attrs); if (swiotlb_addr == (phys_addr_t)DMA_MAPPING_ERROR) return DMA_MAPPING_ERROR; @@ -1647,9 +1710,6 @@ DEFINE_DEBUGFS_ATTRIBUTE(fops_io_tlb_hiwater, io_tlb_hiwater_get, static void swiotlb_create_debugfs_files(struct io_tlb_mem *mem, const char *dirname) { - atomic_long_set(&mem->total_used, 0); - atomic_long_set(&mem->used_hiwater, 0); - mem->debugfs = debugfs_create_dir(dirname, io_tlb_default_mem.debugfs); if (!mem->nslabs) return; @@ -1660,7 +1720,6 @@ static void swiotlb_create_debugfs_files(struct io_tlb_mem *mem, debugfs_create_file("io_tlb_used_hiwater", 0600, mem->debugfs, mem, &fops_io_tlb_hiwater); #ifdef CONFIG_SWIOTLB_DYNAMIC - atomic_long_set(&mem->transient_nslabs, 0); debugfs_create_file("io_tlb_transient_nslabs", 0400, mem->debugfs, mem, &fops_io_tlb_transient_used); #endif @@ -1773,6 +1832,7 @@ static int rmem_swiotlb_device_init(struct reserved_mem *rmem, mem->for_alloc = true; #ifdef CONFIG_SWIOTLB_DYNAMIC spin_lock_init(&mem->lock); + INIT_LIST_HEAD_RCU(&mem->pools); #endif add_mem_pool(mem, pool); |