diff options
Diffstat (limited to 'net')
| -rw-r--r-- | net/Kconfig | 3 | ||||
| -rw-r--r-- | net/core/Makefile | 1 | ||||
| -rw-r--r-- | net/core/ieee8021q_helpers.c | 242 | ||||
| -rw-r--r-- | net/dsa/user.c | 103 |
4 files changed, 349 insertions, 0 deletions
diff --git a/net/Kconfig b/net/Kconfig index d5ab791f7afa..f0a8692496ff 100644 --- a/net/Kconfig +++ b/net/Kconfig @@ -452,6 +452,9 @@ config GRO_CELLS config SOCK_VALIDATE_XMIT bool +config NET_IEEE8021Q_HELPERS + bool + config NET_SELFTESTS def_tristate PHYLIB depends on PHYLIB && INET diff --git a/net/core/Makefile b/net/core/Makefile index 21d6fbc7e884..62be9aef2528 100644 --- a/net/core/Makefile +++ b/net/core/Makefile @@ -26,6 +26,7 @@ obj-$(CONFIG_NETPOLL) += netpoll.o obj-$(CONFIG_FIB_RULES) += fib_rules.o obj-$(CONFIG_TRACEPOINTS) += net-traces.o obj-$(CONFIG_NET_DROP_MONITOR) += drop_monitor.o +obj-$(CONFIG_NET_IEEE8021Q_HELPERS) += ieee8021q_helpers.o obj-$(CONFIG_NET_SELFTESTS) += selftests.o obj-$(CONFIG_NETWORK_PHY_TIMESTAMPING) += timestamping.o obj-$(CONFIG_NET_PTP_CLASSIFY) += ptp_classifier.o diff --git a/net/core/ieee8021q_helpers.c b/net/core/ieee8021q_helpers.c new file mode 100644 index 000000000000..759a9b9f3f89 --- /dev/null +++ b/net/core/ieee8021q_helpers.c @@ -0,0 +1,242 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2024 Pengutronix, Oleksij Rempel <kernel@pengutronix.de> + +#include <linux/array_size.h> +#include <linux/printk.h> +#include <linux/types.h> +#include <net/dscp.h> +#include <net/ieee8021q.h> + +/* The following arrays map Traffic Types (TT) to traffic classes (TC) for + * different number of queues as shown in the example provided by + * IEEE 802.1Q-2022 in Annex I "I.3 Traffic type to traffic class mapping" and + * Table I-1 "Traffic type to traffic class mapping". + */ +static const u8 ieee8021q_8queue_tt_tc_map[] = { + [IEEE8021Q_TT_BK] = 0, + [IEEE8021Q_TT_BE] = 1, + [IEEE8021Q_TT_EE] = 2, + [IEEE8021Q_TT_CA] = 3, + [IEEE8021Q_TT_VI] = 4, + [IEEE8021Q_TT_VO] = 5, + [IEEE8021Q_TT_IC] = 6, + [IEEE8021Q_TT_NC] = 7, +}; + +static const u8 ieee8021q_7queue_tt_tc_map[] = { + [IEEE8021Q_TT_BK] = 0, + [IEEE8021Q_TT_BE] = 1, + [IEEE8021Q_TT_EE] = 2, + [IEEE8021Q_TT_CA] = 3, + [IEEE8021Q_TT_VI] = 4, [IEEE8021Q_TT_VO] = 4, + [IEEE8021Q_TT_IC] = 5, + [IEEE8021Q_TT_NC] = 6, +}; + +static const u8 ieee8021q_6queue_tt_tc_map[] = { + [IEEE8021Q_TT_BK] = 0, + [IEEE8021Q_TT_BE] = 1, + [IEEE8021Q_TT_EE] = 2, [IEEE8021Q_TT_CA] = 2, + [IEEE8021Q_TT_VI] = 3, [IEEE8021Q_TT_VO] = 3, + [IEEE8021Q_TT_IC] = 4, + [IEEE8021Q_TT_NC] = 5, +}; + +static const u8 ieee8021q_5queue_tt_tc_map[] = { + [IEEE8021Q_TT_BK] = 0, [IEEE8021Q_TT_BE] = 0, + [IEEE8021Q_TT_EE] = 1, [IEEE8021Q_TT_CA] = 1, + [IEEE8021Q_TT_VI] = 2, [IEEE8021Q_TT_VO] = 2, + [IEEE8021Q_TT_IC] = 3, + [IEEE8021Q_TT_NC] = 4, +}; + +static const u8 ieee8021q_4queue_tt_tc_map[] = { + [IEEE8021Q_TT_BK] = 0, [IEEE8021Q_TT_BE] = 0, + [IEEE8021Q_TT_EE] = 1, [IEEE8021Q_TT_CA] = 1, + [IEEE8021Q_TT_VI] = 2, [IEEE8021Q_TT_VO] = 2, + [IEEE8021Q_TT_IC] = 3, [IEEE8021Q_TT_NC] = 3, +}; + +static const u8 ieee8021q_3queue_tt_tc_map[] = { + [IEEE8021Q_TT_BK] = 0, [IEEE8021Q_TT_BE] = 0, + [IEEE8021Q_TT_EE] = 0, [IEEE8021Q_TT_CA] = 0, + [IEEE8021Q_TT_VI] = 1, [IEEE8021Q_TT_VO] = 1, + [IEEE8021Q_TT_IC] = 2, [IEEE8021Q_TT_NC] = 2, +}; + +static const u8 ieee8021q_2queue_tt_tc_map[] = { + [IEEE8021Q_TT_BK] = 0, [IEEE8021Q_TT_BE] = 0, + [IEEE8021Q_TT_EE] = 0, [IEEE8021Q_TT_CA] = 0, + [IEEE8021Q_TT_VI] = 1, [IEEE8021Q_TT_VO] = 1, + [IEEE8021Q_TT_IC] = 1, [IEEE8021Q_TT_NC] = 1, +}; + +static const u8 ieee8021q_1queue_tt_tc_map[] = { + [IEEE8021Q_TT_BK] = 0, [IEEE8021Q_TT_BE] = 0, + [IEEE8021Q_TT_EE] = 0, [IEEE8021Q_TT_CA] = 0, + [IEEE8021Q_TT_VI] = 0, [IEEE8021Q_TT_VO] = 0, + [IEEE8021Q_TT_IC] = 0, [IEEE8021Q_TT_NC] = 0, +}; + +/** + * ieee8021q_tt_to_tc - Map IEEE 802.1Q Traffic Type to Traffic Class + * @tt: IEEE 802.1Q Traffic Type + * @num_queues: Number of queues + * + * This function maps an IEEE 802.1Q Traffic Type to a Traffic Class (TC) based + * on the number of queues configured on the NIC. The mapping is based on the + * example provided by IEEE 802.1Q-2022 in Annex I "I.3 Traffic type to traffic + * class mapping" and Table I-1 "Traffic type to traffic class mapping". + * + * Return: Traffic Class corresponding to the given Traffic Type or negative + * value in case of error. + */ +int ieee8021q_tt_to_tc(enum ieee8021q_traffic_type tt, unsigned int num_queues) +{ + if (tt < 0 || tt >= IEEE8021Q_TT_MAX) { + pr_err("Requested Traffic Type (%d) is out of range (%d)\n", tt, + IEEE8021Q_TT_MAX); + return -EINVAL; + } + + switch (num_queues) { + case 8: + compiletime_assert(ARRAY_SIZE(ieee8021q_8queue_tt_tc_map) != + IEEE8021Q_TT_MAX - 1, + "ieee8021q_8queue_tt_tc_map != max - 1"); + return ieee8021q_8queue_tt_tc_map[tt]; + case 7: + compiletime_assert(ARRAY_SIZE(ieee8021q_7queue_tt_tc_map) != + IEEE8021Q_TT_MAX - 1, + "ieee8021q_7queue_tt_tc_map != max - 1"); + + return ieee8021q_7queue_tt_tc_map[tt]; + case 6: + compiletime_assert(ARRAY_SIZE(ieee8021q_6queue_tt_tc_map) != + IEEE8021Q_TT_MAX - 1, + "ieee8021q_6queue_tt_tc_map != max - 1"); + + return ieee8021q_6queue_tt_tc_map[tt]; + case 5: + compiletime_assert(ARRAY_SIZE(ieee8021q_5queue_tt_tc_map) != + IEEE8021Q_TT_MAX - 1, + "ieee8021q_5queue_tt_tc_map != max - 1"); + + return ieee8021q_5queue_tt_tc_map[tt]; + case 4: + compiletime_assert(ARRAY_SIZE(ieee8021q_4queue_tt_tc_map) != + IEEE8021Q_TT_MAX - 1, + "ieee8021q_4queue_tt_tc_map != max - 1"); + + return ieee8021q_4queue_tt_tc_map[tt]; + case 3: + compiletime_assert(ARRAY_SIZE(ieee8021q_3queue_tt_tc_map) != + IEEE8021Q_TT_MAX - 1, + "ieee8021q_3queue_tt_tc_map != max - 1"); + + return ieee8021q_3queue_tt_tc_map[tt]; + case 2: + compiletime_assert(ARRAY_SIZE(ieee8021q_2queue_tt_tc_map) != + IEEE8021Q_TT_MAX - 1, + "ieee8021q_2queue_tt_tc_map != max - 1"); + + return ieee8021q_2queue_tt_tc_map[tt]; + case 1: + compiletime_assert(ARRAY_SIZE(ieee8021q_1queue_tt_tc_map) != + IEEE8021Q_TT_MAX - 1, + "ieee8021q_1queue_tt_tc_map != max - 1"); + + return ieee8021q_1queue_tt_tc_map[tt]; + } + + pr_err("Invalid number of queues %d\n", num_queues); + + return -EINVAL; +} +EXPORT_SYMBOL_GPL(ieee8021q_tt_to_tc); + +/** + * ietf_dscp_to_ieee8021q_tt - Map IETF DSCP to IEEE 802.1Q Traffic Type + * @dscp: IETF DSCP value + * + * This function maps an IETF DSCP value to an IEEE 802.1Q Traffic Type (TT). + * Since there is no corresponding mapping between DSCP and IEEE 802.1Q Traffic + * Type, this function is inspired by the RFC8325 documentation which describe + * the mapping between DSCP and 802.11 User Priority (UP) values. + * + * Return: IEEE 802.1Q Traffic Type corresponding to the given DSCP value + */ +int ietf_dscp_to_ieee8021q_tt(u8 dscp) +{ + switch (dscp) { + case DSCP_CS0: + /* Comment from RFC8325: + * [RFC4594], Section 4.8, recommends High-Throughput Data be marked + * AF1x (that is, AF11, AF12, and AF13, according to the rules defined + * in [RFC2475]). + * + * By default (as described in Section 2.3), High-Throughput Data will + * map to UP 1 and, thus, to the Background Access Category (AC_BK), + * which is contrary to the intent expressed in [RFC4594]. + + * Unfortunately, there really is no corresponding fit for the High- + * Throughput Data service class within the constrained 4 Access + * Category [IEEE.802.11-2016] model. If the High-Throughput Data + * service class is assigned to the Best Effort Access Category (AC_BE), + * then it would contend with Low-Latency Data (while [RFC4594] + * recommends a distinction in servicing between these service classes) + * as well as with the default service class; alternatively, if it is + * assigned to the Background Access Category (AC_BK), then it would + * receive a less-then-best-effort service and contend with Low-Priority + * Data (as discussed in Section 4.2.10). + * + * As such, since there is no directly corresponding fit for the High- + * Throughout Data service class within the [IEEE.802.11-2016] model, it + * is generally RECOMMENDED to map High-Throughput Data to UP 0, thereby + * admitting it to the Best Effort Access Category (AC_BE). + * + * Note: The above text is from RFC8325 which is describing the mapping + * between DSCP and 802.11 User Priority (UP) values. The mapping + * between UP and IEEE 802.1Q Traffic Type is not defined in the RFC but + * the 802.11 AC_BK and AC_BE are closely related to the IEEE 802.1Q + * Traffic Types BE and BK. + */ + case DSCP_AF11: + case DSCP_AF12: + case DSCP_AF13: + return IEEE8021Q_TT_BE; + /* Comment from RFC8325: + * RFC3662 and RFC4594 both recommend Low-Priority Data be marked + * with DSCP CS1. The Low-Priority Data service class loosely + * corresponds to the [IEEE.802.11-2016] Background Access Category + */ + case DSCP_CS1: + return IEEE8021Q_TT_BK; + case DSCP_CS2: + case DSCP_AF21: + case DSCP_AF22: + case DSCP_AF23: + return IEEE8021Q_TT_EE; + case DSCP_CS3: + case DSCP_AF31: + case DSCP_AF32: + case DSCP_AF33: + return IEEE8021Q_TT_CA; + case DSCP_CS4: + case DSCP_AF41: + case DSCP_AF42: + case DSCP_AF43: + return IEEE8021Q_TT_VI; + case DSCP_CS5: + case DSCP_EF: + case DSCP_VOICE_ADMIT: + return IEEE8021Q_TT_VO; + case DSCP_CS6: + return IEEE8021Q_TT_IC; + case DSCP_CS7: + return IEEE8021Q_TT_NC; + } + + return SIMPLE_IETF_DSCP_TO_IEEE8021Q_TT(dscp); +} +EXPORT_SYMBOL_GPL(ietf_dscp_to_ieee8021q_tt); diff --git a/net/dsa/user.c b/net/dsa/user.c index 1f7b8f21db9e..867c5fe9a4da 100644 --- a/net/dsa/user.c +++ b/net/dsa/user.c @@ -2137,6 +2137,32 @@ out_conduit_failed: } static int __maybe_unused +dsa_user_dcbnl_set_apptrust(struct net_device *dev, u8 *sel, int nsel) +{ + struct dsa_port *dp = dsa_user_to_port(dev); + struct dsa_switch *ds = dp->ds; + int port = dp->index; + + if (!ds->ops->port_set_apptrust) + return -EOPNOTSUPP; + + return ds->ops->port_set_apptrust(ds, port, sel, nsel); +} + +static int __maybe_unused +dsa_user_dcbnl_get_apptrust(struct net_device *dev, u8 *sel, int *nsel) +{ + struct dsa_port *dp = dsa_user_to_port(dev); + struct dsa_switch *ds = dp->ds; + int port = dp->index; + + if (!ds->ops->port_get_apptrust) + return -EOPNOTSUPP; + + return ds->ops->port_get_apptrust(ds, port, sel, nsel); +} + +static int __maybe_unused dsa_user_dcbnl_set_default_prio(struct net_device *dev, struct dcb_app *app) { struct dsa_port *dp = dsa_user_to_port(dev); @@ -2163,6 +2189,58 @@ dsa_user_dcbnl_set_default_prio(struct net_device *dev, struct dcb_app *app) return 0; } +/* Update the DSCP prio entries on all user ports of the switch in case + * the switch supports global DSCP prio instead of per port DSCP prios. + */ +static int dsa_user_dcbnl_ieee_global_dscp_setdel(struct net_device *dev, + struct dcb_app *app, bool del) +{ + int (*setdel)(struct net_device *dev, struct dcb_app *app); + struct dsa_port *dp = dsa_user_to_port(dev); + struct dsa_switch *ds = dp->ds; + struct dsa_port *other_dp; + int err, restore_err; + + if (del) + setdel = dcb_ieee_delapp; + else + setdel = dcb_ieee_setapp; + + dsa_switch_for_each_user_port(other_dp, ds) { + struct net_device *user = other_dp->user; + + if (!user || user == dev) + continue; + + err = setdel(user, app); + if (err) + goto err_try_to_restore; + } + + return 0; + +err_try_to_restore: + + /* Revert logic to restore previous state of app entries */ + if (!del) + setdel = dcb_ieee_delapp; + else + setdel = dcb_ieee_setapp; + + dsa_switch_for_each_user_port_continue_reverse(other_dp, ds) { + struct net_device *user = other_dp->user; + + if (!user || user == dev) + continue; + + restore_err = setdel(user, app); + if (restore_err) + netdev_err(user, "Failed to restore DSCP prio entry configuration\n"); + } + + return err; +} + static int __maybe_unused dsa_user_dcbnl_add_dscp_prio(struct net_device *dev, struct dcb_app *app) { @@ -2194,6 +2272,17 @@ dsa_user_dcbnl_add_dscp_prio(struct net_device *dev, struct dcb_app *app) return err; } + if (!ds->dscp_prio_mapping_is_global) + return 0; + + err = dsa_user_dcbnl_ieee_global_dscp_setdel(dev, app, false); + if (err) { + if (ds->ops->port_del_dscp_prio) + ds->ops->port_del_dscp_prio(ds, port, dscp, new_prio); + dcb_ieee_delapp(dev, app); + return err; + } + return 0; } @@ -2264,6 +2353,18 @@ dsa_user_dcbnl_del_dscp_prio(struct net_device *dev, struct dcb_app *app) return err; } + if (!ds->dscp_prio_mapping_is_global) + return 0; + + err = dsa_user_dcbnl_ieee_global_dscp_setdel(dev, app, true); + if (err) { + if (ds->ops->port_add_dscp_prio) + ds->ops->port_add_dscp_prio(ds, port, dscp, + app->priority); + dcb_ieee_setapp(dev, app); + return err; + } + return 0; } @@ -2376,6 +2477,8 @@ static const struct ethtool_ops dsa_user_ethtool_ops = { static const struct dcbnl_rtnl_ops __maybe_unused dsa_user_dcbnl_ops = { .ieee_setapp = dsa_user_dcbnl_ieee_setapp, .ieee_delapp = dsa_user_dcbnl_ieee_delapp, + .dcbnl_setapptrust = dsa_user_dcbnl_set_apptrust, + .dcbnl_getapptrust = dsa_user_dcbnl_get_apptrust, }; static void dsa_user_get_stats64(struct net_device *dev, |