diff options
Diffstat (limited to 'tools/perf/Documentation/perf-intel-pt.txt')
| -rw-r--r-- | tools/perf/Documentation/perf-intel-pt.txt | 1007 |
1 files changed, 1007 insertions, 0 deletions
diff --git a/tools/perf/Documentation/perf-intel-pt.txt b/tools/perf/Documentation/perf-intel-pt.txt new file mode 100644 index 000000000000..456fdcbf26ac --- /dev/null +++ b/tools/perf/Documentation/perf-intel-pt.txt @@ -0,0 +1,1007 @@ +perf-intel-pt(1) +================ + +NAME +---- +perf-intel-pt - Support for Intel Processor Trace within perf tools + +SYNOPSIS +-------- +[verse] +'perf record' -e intel_pt// + +DESCRIPTION +----------- + +Intel Processor Trace (Intel PT) is an extension of Intel Architecture that +collects information about software execution such as control flow, execution +modes and timings and formats it into highly compressed binary packets. +Technical details are documented in the Intel 64 and IA-32 Architectures +Software Developer Manuals, Chapter 36 Intel Processor Trace. + +Intel PT is first supported in Intel Core M and 5th generation Intel Core +processors that are based on the Intel micro-architecture code name Broadwell. + +Trace data is collected by 'perf record' and stored within the perf.data file. +See below for options to 'perf record'. + +Trace data must be 'decoded' which involves walking the object code and matching +the trace data packets. For example a TNT packet only tells whether a +conditional branch was taken or not taken, so to make use of that packet the +decoder must know precisely which instruction was being executed. + +Decoding is done on-the-fly. The decoder outputs samples in the same format as +samples output by perf hardware events, for example as though the "instructions" +or "branches" events had been recorded. Presently 3 tools support this: +'perf script', 'perf report' and 'perf inject'. See below for more information +on using those tools. + +The main distinguishing feature of Intel PT is that the decoder can determine +the exact flow of software execution. Intel PT can be used to understand why +and how did software get to a certain point, or behave a certain way. The +software does not have to be recompiled, so Intel PT works with debug or release +builds, however the executed images are needed - which makes use in JIT-compiled +environments, or with self-modified code, a challenge. Also symbols need to be +provided to make sense of addresses. + +A limitation of Intel PT is that it produces huge amounts of trace data +(hundreds of megabytes per second per core) which takes a long time to decode, +for example two or three orders of magnitude longer than it took to collect. +Another limitation is the performance impact of tracing, something that will +vary depending on the use-case and architecture. + + +Quickstart +---------- + +It is important to start small. That is because it is easy to capture vastly +more data than can possibly be processed. + +The simplest thing to do with Intel PT is userspace profiling of small programs. +Data is captured with 'perf record' e.g. to trace 'ls' userspace-only: + + perf record -e intel_pt//u ls + +And profiled with 'perf report' e.g. + + perf report + +To also trace kernel space presents a problem, namely kernel self-modifying +code. A fairly good kernel image is available in /proc/kcore but to get an +accurate image a copy of /proc/kcore needs to be made under the same conditions +as the data capture. A script perf-with-kcore can do that, but beware that the +script makes use of 'sudo' to copy /proc/kcore. If you have perf installed +locally from the source tree you can do: + + ~/libexec/perf-core/perf-with-kcore record pt_ls -e intel_pt// -- ls + +which will create a directory named 'pt_ls' and put the perf.data file and +copies of /proc/kcore, /proc/kallsyms and /proc/modules into it. Then to use +'perf report' becomes: + + ~/libexec/perf-core/perf-with-kcore report pt_ls + +Because samples are synthesized after-the-fact, the sampling period can be +selected for reporting. e.g. sample every microsecond + + ~/libexec/perf-core/perf-with-kcore report pt_ls --itrace=i1usge + +See the sections below for more information about the --itrace option. + +Beware the smaller the period, the more samples that are produced, and the +longer it takes to process them. + +Also note that the coarseness of Intel PT timing information will start to +distort the statistical value of the sampling as the sampling period becomes +smaller. + +To represent software control flow, "branches" samples are produced. By default +a branch sample is synthesized for every single branch. To get an idea what +data is available you can use the 'perf script' tool with all itrace sampling +options, which will list all the samples. + + perf record -e intel_pt//u ls + perf script --itrace=ibxwpe + +An interesting field that is not printed by default is 'flags' which can be +displayed as follows: + + perf script --itrace=ibxwpe -F+flags + +The flags are "bcrosyiABEx" which stand for branch, call, return, conditional, +system, asynchronous, interrupt, transaction abort, trace begin, trace end, and +in transaction, respectively. + +Another interesting field that is not printed by default is 'ipc' which can be +displayed as follows: + + perf script --itrace=be -F+ipc + +There are two ways that instructions-per-cycle (IPC) can be calculated depending +on the recording. + +If the 'cyc' config term (see config terms section below) was used, then IPC is +calculated using the cycle count from CYC packets, otherwise MTC packets are +used - refer to the 'mtc' config term. When MTC is used, however, the values +are less accurate because the timing is less accurate. + +Because Intel PT does not update the cycle count on every branch or instruction, +the values will often be zero. When there are values, they will be the number +of instructions and number of cycles since the last update, and thus represent +the average IPC since the last IPC for that event type. Note IPC for "branches" +events is calculated separately from IPC for "instructions" events. + +Also note that the IPC instruction count may or may not include the current +instruction. If the cycle count is associated with an asynchronous branch +(e.g. page fault or interrupt), then the instruction count does not include the +current instruction, otherwise it does. That is consistent with whether or not +that instruction has retired when the cycle count is updated. + +Another note, in the case of "branches" events, non-taken branches are not +presently sampled, so IPC values for them do not appear e.g. a CYC packet with a +TNT packet that starts with a non-taken branch. To see every possible IPC +value, "instructions" events can be used e.g. --itrace=i0ns + +While it is possible to create scripts to analyze the data, an alternative +approach is available to export the data to a sqlite or postgresql database. +Refer to script export-to-sqlite.py or export-to-postgresql.py for more details, +and to script exported-sql-viewer.py for an example of using the database. + +There is also script intel-pt-events.py which provides an example of how to +unpack the raw data for power events and PTWRITE. + +As mentioned above, it is easy to capture too much data. One way to limit the +data captured is to use 'snapshot' mode which is explained further below. +Refer to 'new snapshot option' and 'Intel PT modes of operation' further below. + +Another problem that will be experienced is decoder errors. They can be caused +by inability to access the executed image, self-modified or JIT-ed code, or the +inability to match side-band information (such as context switches and mmaps) +which results in the decoder not knowing what code was executed. + +There is also the problem of perf not being able to copy the data fast enough, +resulting in data lost because the buffer was full. See 'Buffer handling' below +for more details. + + +perf record +----------- + +new event +~~~~~~~~~ + +The Intel PT kernel driver creates a new PMU for Intel PT. PMU events are +selected by providing the PMU name followed by the "config" separated by slashes. +An enhancement has been made to allow default "config" e.g. the option + + -e intel_pt// + +will use a default config value. Currently that is the same as + + -e intel_pt/tsc,noretcomp=0/ + +which is the same as + + -e intel_pt/tsc=1,noretcomp=0/ + +Note there are now new config terms - see section 'config terms' further below. + +The config terms are listed in /sys/devices/intel_pt/format. They are bit +fields within the config member of the struct perf_event_attr which is +passed to the kernel by the perf_event_open system call. They correspond to bit +fields in the IA32_RTIT_CTL MSR. Here is a list of them and their definitions: + + $ grep -H . /sys/bus/event_source/devices/intel_pt/format/* + /sys/bus/event_source/devices/intel_pt/format/cyc:config:1 + /sys/bus/event_source/devices/intel_pt/format/cyc_thresh:config:19-22 + /sys/bus/event_source/devices/intel_pt/format/mtc:config:9 + /sys/bus/event_source/devices/intel_pt/format/mtc_period:config:14-17 + /sys/bus/event_source/devices/intel_pt/format/noretcomp:config:11 + /sys/bus/event_source/devices/intel_pt/format/psb_period:config:24-27 + /sys/bus/event_source/devices/intel_pt/format/tsc:config:10 + +Note that the default config must be overridden for each term i.e. + + -e intel_pt/noretcomp=0/ + +is the same as: + + -e intel_pt/tsc=1,noretcomp=0/ + +So, to disable TSC packets use: + + -e intel_pt/tsc=0/ + +It is also possible to specify the config value explicitly: + + -e intel_pt/config=0x400/ + +Note that, as with all events, the event is suffixed with event modifiers: + + u userspace + k kernel + h hypervisor + G guest + H host + p precise ip + +'h', 'G' and 'H' are for virtualization which is not supported by Intel PT. +'p' is also not relevant to Intel PT. So only options 'u' and 'k' are +meaningful for Intel PT. + +perf_event_attr is displayed if the -vv option is used e.g. + + ------------------------------------------------------------ + perf_event_attr: + type 6 + size 112 + config 0x400 + { sample_period, sample_freq } 1 + sample_type IP|TID|TIME|CPU|IDENTIFIER + read_format ID + disabled 1 + inherit 1 + exclude_kernel 1 + exclude_hv 1 + enable_on_exec 1 + sample_id_all 1 + ------------------------------------------------------------ + sys_perf_event_open: pid 31104 cpu 0 group_fd -1 flags 0x8 + sys_perf_event_open: pid 31104 cpu 1 group_fd -1 flags 0x8 + sys_perf_event_open: pid 31104 cpu 2 group_fd -1 flags 0x8 + sys_perf_event_open: pid 31104 cpu 3 group_fd -1 flags 0x8 + ------------------------------------------------------------ + + +config terms +~~~~~~~~~~~~ + +The June 2015 version of Intel 64 and IA-32 Architectures Software Developer +Manuals, Chapter 36 Intel Processor Trace, defined new Intel PT features. +Some of the features are reflect in new config terms. All the config terms are +described below. + +tsc Always supported. Produces TSC timestamp packets to provide + timing information. In some cases it is possible to decode + without timing information, for example a per-thread context + that does not overlap executable memory maps. + + The default config selects tsc (i.e. tsc=1). + +noretcomp Always supported. Disables "return compression" so a TIP packet + is produced when a function returns. Causes more packets to be + produced but might make decoding more reliable. + + The default config does not select noretcomp (i.e. noretcomp=0). + +psb_period Allows the frequency of PSB packets to be specified. + + The PSB packet is a synchronization packet that provides a + starting point for decoding or recovery from errors. + + Support for psb_period is indicated by: + + /sys/bus/event_source/devices/intel_pt/caps/psb_cyc + + which contains "1" if the feature is supported and "0" + otherwise. + + Valid values are given by: + + /sys/bus/event_source/devices/intel_pt/caps/psb_periods + + which contains a hexadecimal value, the bits of which represent + valid values e.g. bit 2 set means value 2 is valid. + + The psb_period value is converted to the approximate number of + trace bytes between PSB packets as: + + 2 ^ (value + 11) + + e.g. value 3 means 16KiB bytes between PSBs + + If an invalid value is entered, the error message + will give a list of valid values e.g. + + $ perf record -e intel_pt/psb_period=15/u uname + Invalid psb_period for intel_pt. Valid values are: 0-5 + + If MTC packets are selected, the default config selects a value + of 3 (i.e. psb_period=3) or the nearest lower value that is + supported (0 is always supported). Otherwise the default is 0. + + If decoding is expected to be reliable and the buffer is large + then a large PSB period can be used. + + Because a TSC packet is produced with PSB, the PSB period can + also affect the granularity to timing information in the absence + of MTC or CYC. + +mtc Produces MTC timing packets. + + MTC packets provide finer grain timestamp information than TSC + packets. MTC packets record time using the hardware crystal + clock (CTC) which is related to TSC packets using a TMA packet. + + Support for this feature is indicated by: + + /sys/bus/event_source/devices/intel_pt/caps/mtc + + which contains "1" if the feature is supported and + "0" otherwise. + + The frequency of MTC packets can also be specified - see + mtc_period below. + +mtc_period Specifies how frequently MTC packets are produced - see mtc + above for how to determine if MTC packets are supported. + + Valid values are given by: + + /sys/bus/event_source/devices/intel_pt/caps/mtc_periods + + which contains a hexadecimal value, the bits of which represent + valid values e.g. bit 2 set means value 2 is valid. + + The mtc_period value is converted to the MTC frequency as: + + CTC-frequency / (2 ^ value) + + e.g. value 3 means one eighth of CTC-frequency + + Where CTC is the hardware crystal clock, the frequency of which + can be related to TSC via values provided in cpuid leaf 0x15. + + If an invalid value is entered, the error message + will give a list of valid values e.g. + + $ perf record -e intel_pt/mtc_period=15/u uname + Invalid mtc_period for intel_pt. Valid values are: 0,3,6,9 + + The default value is 3 or the nearest lower value + that is supported (0 is always supported). + +cyc Produces CYC timing packets. + + CYC packets provide even finer grain timestamp information than + MTC and TSC packets. A CYC packet contains the number of CPU + cycles since the last CYC packet. Unlike MTC and TSC packets, + CYC packets are only sent when another packet is also sent. + + Support for this feature is indicated by: + + /sys/bus/event_source/devices/intel_pt/caps/psb_cyc + + which contains "1" if the feature is supported and + "0" otherwise. + + The number of CYC packets produced can be reduced by specifying + a threshold - see cyc_thresh below. + +cyc_thresh Specifies how frequently CYC packets are produced - see cyc + above for how to determine if CYC packets are supported. + + Valid cyc_thresh values are given by: + + /sys/bus/event_source/devices/intel_pt/caps/cycle_thresholds + + which contains a hexadecimal value, the bits of which represent + valid values e.g. bit 2 set means value 2 is valid. + + The cyc_thresh value represents the minimum number of CPU cycles + that must have passed before a CYC packet can be sent. The + number of CPU cycles is: + + 2 ^ (value - 1) + + e.g. value 4 means 8 CPU cycles must pass before a CYC packet + can be sent. Note a CYC packet is still only sent when another + packet is sent, not at, e.g. every 8 CPU cycles. + + If an invalid value is entered, the error message + will give a list of valid values e.g. + + $ perf record -e intel_pt/cyc,cyc_thresh=15/u uname + Invalid cyc_thresh for intel_pt. Valid values are: 0-12 + + CYC packets are not requested by default. + +pt Specifies pass-through which enables the 'branch' config term. + + The default config selects 'pt' if it is available, so a user will + never need to specify this term. + +branch Enable branch tracing. Branch tracing is enabled by default so to + disable branch tracing use 'branch=0'. + + The default config selects 'branch' if it is available. + +ptw Enable PTWRITE packets which are produced when a ptwrite instruction + is executed. + + Support for this feature is indicated by: + + /sys/bus/event_source/devices/intel_pt/caps/ptwrite + + which contains "1" if the feature is supported and + "0" otherwise. + +fup_on_ptw Enable a FUP packet to follow the PTWRITE packet. The FUP packet + provides the address of the ptwrite instruction. In the absence of + fup_on_ptw, the decoder will use the address of the previous branch + if branch tracing is enabled, otherwise the address will be zero. + Note that fup_on_ptw will work even when branch tracing is disabled. + +pwr_evt Enable power events. The power events provide information about + changes to the CPU C-state. + + Support for this feature is indicated by: + + /sys/bus/event_source/devices/intel_pt/caps/power_event_trace + + which contains "1" if the feature is supported and + "0" otherwise. + + +AUX area sampling option +~~~~~~~~~~~~~~~~~~~~~~~~ + +To select Intel PT "sampling" the AUX area sampling option can be used: + + --aux-sample + +Optionally it can be followed by the sample size in bytes e.g. + + --aux-sample=8192 + +In addition, the Intel PT event to sample must be defined e.g. + + -e intel_pt//u + +Samples on other events will be created containing Intel PT data e.g. the +following will create Intel PT samples on the branch-misses event, note the +events must be grouped using {}: + + perf record --aux-sample -e '{intel_pt//u,branch-misses:u}' + +An alternative to '--aux-sample' is to add the config term 'aux-sample-size' to +events. In this case, the grouping is implied e.g. + + perf record -e intel_pt//u -e branch-misses/aux-sample-size=8192/u + +is the same as: + + perf record -e '{intel_pt//u,branch-misses/aux-sample-size=8192/u}' + +but allows for also using an address filter e.g.: + + perf record -e intel_pt//u --filter 'filter * @/bin/ls' -e branch-misses/aux-sample-size=8192/u -- ls + +It is important to select a sample size that is big enough to contain at least +one PSB packet. If not a warning will be displayed: + + Intel PT sample size (%zu) may be too small for PSB period (%zu) + +The calculation used for that is: if sample_size <= psb_period + 256 display the +warning. When sampling is used, psb_period defaults to 0 (2KiB). + +The default sample size is 4KiB. + +The sample size is passed in aux_sample_size in struct perf_event_attr. The +sample size is limited by the maximum event size which is 64KiB. It is +difficult to know how big the event might be without the trace sample attached, +but the tool validates that the sample size is not greater than 60KiB. + + +new snapshot option +~~~~~~~~~~~~~~~~~~~ + +The difference between full trace and snapshot from the kernel's perspective is +that in full trace we don't overwrite trace data that the user hasn't collected +yet (and indicated that by advancing aux_tail), whereas in snapshot mode we let +the trace run and overwrite older data in the buffer so that whenever something +interesting happens, we can stop it and grab a snapshot of what was going on +around that interesting moment. + +To select snapshot mode a new option has been added: + + -S + +Optionally it can be followed by the snapshot size e.g. + + -S0x100000 + +The default snapshot size is the auxtrace mmap size. If neither auxtrace mmap size +nor snapshot size is specified, then the default is 4MiB for privileged users +(or if /proc/sys/kernel/perf_event_paranoid < 0), 128KiB for unprivileged users. +If an unprivileged user does not specify mmap pages, the mmap pages will be +reduced as described in the 'new auxtrace mmap size option' section below. + +The snapshot size is displayed if the option -vv is used e.g. + + Intel PT snapshot size: %zu + + +new auxtrace mmap size option +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Intel PT buffer size is specified by an addition to the -m option e.g. + + -m,16 + +selects a buffer size of 16 pages i.e. 64KiB. + +Note that the existing functionality of -m is unchanged. The auxtrace mmap size +is specified by the optional addition of a comma and the value. + +The default auxtrace mmap size for Intel PT is 4MiB/page_size for privileged users +(or if /proc/sys/kernel/perf_event_paranoid < 0), 128KiB for unprivileged users. +If an unprivileged user does not specify mmap pages, the mmap pages will be +reduced from the default 512KiB/page_size to 256KiB/page_size, otherwise the +user is likely to get an error as they exceed their mlock limit (Max locked +memory as shown in /proc/self/limits). Note that perf does not count the first +512KiB (actually /proc/sys/kernel/perf_event_mlock_kb minus 1 page) per cpu +against the mlock limit so an unprivileged user is allowed 512KiB per cpu plus +their mlock limit (which defaults to 64KiB but is not multiplied by the number +of cpus). + +In full-trace mode, powers of two are allowed for buffer size, with a minimum +size of 2 pages. In snapshot mode or sampling mode, it is the same but the +minimum size is 1 page. + +The mmap size and auxtrace mmap size are displayed if the -vv option is used e.g. + + mmap length 528384 + auxtrace mmap length 4198400 + + +Intel PT modes of operation +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Intel PT can be used in 2 modes: + full-trace mode + sample mode + snapshot mode + +Full-trace mode traces continuously e.g. + + perf record -e intel_pt//u uname + +Sample mode attaches a Intel PT sample to other events e.g. + + perf record --aux-sample -e intel_pt//u -e branch-misses:u + +Snapshot mode captures the available data when a signal is sent e.g. + + perf record -v -e intel_pt//u -S ./loopy 1000000000 & + [1] 11435 + kill -USR2 11435 + Recording AUX area tracing snapshot + +Note that the signal sent is SIGUSR2. +Note that "Recording AUX area tracing snapshot" is displayed because the -v +option is used. + +The 2 modes cannot be used together. + + +Buffer handling +~~~~~~~~~~~~~~~ + +There may be buffer limitations (i.e. single ToPa entry) which means that actual +buffer sizes are limited to powers of 2 up to 4MiB (MAX_ORDER). In order to +provide other sizes, and in particular an arbitrarily large size, multiple +buffers are logically concatenated. However an interrupt must be used to switch +between buffers. That has two potential problems: + a) the interrupt may not be handled in time so that the current buffer + becomes full and some trace data is lost. + b) the interrupts may slow the system and affect the performance + results. + +If trace data is lost, the driver sets 'truncated' in the PERF_RECORD_AUX event +which the tools report as an error. + +In full-trace mode, the driver waits for data to be copied out before allowing +the (logical) buffer to wrap-around. If data is not copied out quickly enough, +again 'truncated' is set in the PERF_RECORD_AUX event. If the driver has to +wait, the intel_pt event gets disabled. Because it is difficult to know when +that happens, perf tools always re-enable the intel_pt event after copying out +data. + + +Intel PT and build ids +~~~~~~~~~~~~~~~~~~~~~~ + +By default "perf record" post-processes the event stream to find all build ids +for executables for all addresses sampled. Deliberately, Intel PT is not +decoded for that purpose (it would take too long). Instead the build ids for +all executables encountered (due to mmap, comm or task events) are included +in the perf.data file. + +To see buildids included in the perf.data file use the command: + + perf buildid-list + +If the perf.data file contains Intel PT data, that is the same as: + + perf buildid-list --with-hits + + +Snapshot mode and event disabling +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +In order to make a snapshot, the intel_pt event is disabled using an IOCTL, +namely PERF_EVENT_IOC_DISABLE. However doing that can also disable the +collection of side-band information. In order to prevent that, a dummy +software event has been introduced that permits tracking events (like mmaps) to +continue to be recorded while intel_pt is disabled. That is important to ensure +there is complete side-band information to allow the decoding of subsequent +snapshots. + +A test has been created for that. To find the test: + + perf test list + ... + 23: Test using a dummy software event to keep tracking + +To run the test: + + perf test 23 + 23: Test using a dummy software event to keep tracking : Ok + + +perf record modes (nothing new here) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +perf record essentially operates in one of three modes: + per thread + per cpu + workload only + +"per thread" mode is selected by -t or by --per-thread (with -p or -u or just a +workload). +"per cpu" is selected by -C or -a. +"workload only" mode is selected by not using the other options but providing a +command to run (i.e. the workload). + +In per-thread mode an exact list of threads is traced. There is no inheritance. +Each thread has its own event buffer. + +In per-cpu mode all processes (or processes from the selected cgroup i.e. -G +option, or processes selected with -p or -u) are traced. Each cpu has its own +buffer. Inheritance is allowed. + +In workload-only mode, the workload is traced but with per-cpu buffers. +Inheritance is allowed. Note that you can now trace a workload in per-thread +mode by using the --per-thread option. + + +Privileged vs non-privileged users +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Unless /proc/sys/kernel/perf_event_paranoid is set to -1, unprivileged users +have memory limits imposed upon them. That affects what buffer sizes they can +have as outlined above. + +The v4.2 kernel introduced support for a context switch metadata event, +PERF_RECORD_SWITCH, which allows unprivileged users to see when their processes +are scheduled out and in, just not by whom, which is left for the +PERF_RECORD_SWITCH_CPU_WIDE, that is only accessible in system wide context, +which in turn requires CAP_SYS_ADMIN. + +Please see the 45ac1403f564 ("perf: Add PERF_RECORD_SWITCH to indicate context +switches") commit, that introduces these metadata events for further info. + +When working with kernels < v4.2, the following considerations must be taken, +as the sched:sched_switch tracepoints will be used to receive such information: + +Unless /proc/sys/kernel/perf_event_paranoid is set to -1, unprivileged users are +not permitted to use tracepoints which means there is insufficient side-band +information to decode Intel PT in per-cpu mode, and potentially workload-only +mode too if the workload creates new processes. + +Note also, that to use tracepoints, read-access to debugfs is required. So if +debugfs is not mounted or the user does not have read-access, it will again not +be possible to decode Intel PT in per-cpu mode. + + +sched_switch tracepoint +~~~~~~~~~~~~~~~~~~~~~~~ + +The sched_switch tracepoint is used to provide side-band data for Intel PT +decoding in kernels where the PERF_RECORD_SWITCH metadata event isn't +available. + +The sched_switch events are automatically added. e.g. the second event shown +below: + + $ perf record -vv -e intel_pt//u uname + ------------------------------------------------------------ + perf_event_attr: + type 6 + size 112 + config 0x400 + { sample_period, sample_freq } 1 + sample_type IP|TID|TIME|CPU|IDENTIFIER + read_format ID + disabled 1 + inherit 1 + exclude_kernel 1 + exclude_hv 1 + enable_on_exec 1 + sample_id_all 1 + ------------------------------------------------------------ + sys_perf_event_open: pid 31104 cpu 0 group_fd -1 flags 0x8 + sys_perf_event_open: pid 31104 cpu 1 group_fd -1 flags 0x8 + sys_perf_event_open: pid 31104 cpu 2 group_fd -1 flags 0x8 + sys_perf_event_open: pid 31104 cpu 3 group_fd -1 flags 0x8 + ------------------------------------------------------------ + perf_event_attr: + type 2 + size 112 + config 0x108 + { sample_period, sample_freq } 1 + sample_type IP|TID|TIME|CPU|PERIOD|RAW|IDENTIFIER + read_format ID + inherit 1 + sample_id_all 1 + exclude_guest 1 + ------------------------------------------------------------ + sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 + sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8 + sys_perf_event_open: pid -1 cpu 2 group_fd -1 flags 0x8 + sys_perf_event_open: pid -1 cpu 3 group_fd -1 flags 0x8 + ------------------------------------------------------------ + perf_event_attr: + type 1 + size 112 + config 0x9 + { sample_period, sample_freq } 1 + sample_type IP|TID|TIME|IDENTIFIER + read_format ID + disabled 1 + inherit 1 + exclude_kernel 1 + exclude_hv 1 + mmap 1 + comm 1 + enable_on_exec 1 + task 1 + sample_id_all 1 + mmap2 1 + comm_exec 1 + ------------------------------------------------------------ + sys_perf_event_open: pid 31104 cpu 0 group_fd -1 flags 0x8 + sys_perf_event_open: pid 31104 cpu 1 group_fd -1 flags 0x8 + sys_perf_event_open: pid 31104 cpu 2 group_fd -1 flags 0x8 + sys_perf_event_open: pid 31104 cpu 3 group_fd -1 flags 0x8 + mmap size 528384B + AUX area mmap length 4194304 + perf event ring buffer mmapped per cpu + Synthesizing auxtrace information + Linux + [ perf record: Woken up 1 times to write data ] + [ perf record: Captured and wrote 0.042 MB perf.data ] + +Note, the sched_switch event is only added if the user is permitted to use it +and only in per-cpu mode. + +Note also, the sched_switch event is only added if TSC packets are requested. +That is because, in the absence of timing information, the sched_switch events +cannot be matched against the Intel PT trace. + + +perf script +----------- + +By default, perf script will decode trace data found in the perf.data file. +This can be further controlled by new option --itrace. + + +New --itrace option +~~~~~~~~~~~~~~~~~~~ + +Having no option is the same as + + --itrace + +which, in turn, is the same as + + --itrace=cepwx + +The letters are: + + i synthesize "instructions" events + b synthesize "branches" events + x synthesize "transactions" events + w synthesize "ptwrite" events + p synthesize "power" events + c synthesize branches events (calls only) + r synthesize branches events (returns only) + e synthesize tracing error events + d create a debug log + g synthesize a call chain (use with i or x) + l synthesize last branch entries (use with i or x) + s skip initial number of events + +"Instructions" events look like they were recorded by "perf record -e +instructions". + +"Branches" events look like they were recorded by "perf record -e branches". "c" +and "r" can be combined to get calls and returns. + +"Transactions" events correspond to the start or end of transactions. The +'flags' field can be used in perf script to determine whether the event is a +tranasaction start, commit or abort. + +Note that "instructions", "branches" and "transactions" events depend on code +flow packets which can be disabled by using the config term "branch=0". Refer +to the config terms section above. + +"ptwrite" events record the payload of the ptwrite instruction and whether +"fup_on_ptw" was used. "ptwrite" events depend on PTWRITE packets which are +recorded only if the "ptw" config term was used. Refer to the config terms +section above. perf script "synth" field displays "ptwrite" information like +this: "ip: 0 payload: 0x123456789abcdef0" where "ip" is 1 if "fup_on_ptw" was +used. + +"Power" events correspond to power event packets and CBR (core-to-bus ratio) +packets. While CBR packets are always recorded when tracing is enabled, power +event packets are recorded only if the "pwr_evt" config term was used. Refer to +the config terms section above. The power events record information about +C-state changes, whereas CBR is indicative of CPU frequency. perf script +"event,synth" fields display information like this: + cbr: cbr: 22 freq: 2189 MHz (200%) + mwait: hints: 0x60 extensions: 0x1 + pwre: hw: 0 cstate: 2 sub-cstate: 0 + exstop: ip: 1 + pwrx: deepest cstate: 2 last cstate: 2 wake reason: 0x4 +Where: + "cbr" includes the frequency and the percentage of maximum non-turbo + "mwait" shows mwait hints and extensions + "pwre" shows C-state transitions (to a C-state deeper than C0) and + whether initiated by hardware + "exstop" indicates execution stopped and whether the IP was recorded + exactly, + "pwrx" indicates return to C0 +For more details refer to the Intel 64 and IA-32 Architectures Software +Developer Manuals. + +Error events show where the decoder lost the trace. Error events +are quite important. Users must know if what they are seeing is a complete +picture or not. + +The "d" option will cause the creation of a file "intel_pt.log" containing all +decoded packets and instructions. Note that this option slows down the decoder +and that the resulting file may be very large. + +In addition, the period of the "instructions" event can be specified. e.g. + + --itrace=i10us + +sets the period to 10us i.e. one instruction sample is synthesized for each 10 +microseconds of trace. Alternatives to "us" are "ms" (milliseconds), +"ns" (nanoseconds), "t" (TSC ticks) or "i" (instructions). + +"ms", "us" and "ns" are converted to TSC ticks. + +The timing information included with Intel PT does not give the time of every +instruction. Consequently, for the purpose of sampling, the decoder estimates +the time since the last timing packet based on 1 tick per instruction. The time +on the sample is *not* adjusted and reflects the last known value of TSC. + +For Intel PT, the default period is 100us. + +Setting it to a zero period means "as often as possible". + +In the case of Intel PT that is the same as a period of 1 and a unit of +'instructions' (i.e. --itrace=i1i). + +Also the call chain size (default 16, max. 1024) for instructions or +transactions events can be specified. e.g. + + --itrace=ig32 + --itrace=xg32 + +Also the number of last branch entries (default 64, max. 1024) for instructions or +transactions events can be specified. e.g. + + --itrace=il10 + --itrace=xl10 + +Note that last branch entries are cleared for each sample, so there is no overlap +from one sample to the next. + +To disable trace decoding entirely, use the option --no-itrace. + +It is also possible to skip events generated (instructions, branches, transactions) +at the beginning. This is useful to ignore initialization code. + + --itrace=i0nss1000000 + +skips the first million instructions. + +dump option +~~~~~~~~~~~ + +perf script has an option (-D) to "dump" the events i.e. display the binary +data. + +When -D is used, Intel PT packets are displayed. The packet decoder does not +pay attention to PSB packets, but just decodes the bytes - so the packets seen +by the actual decoder may not be identical in places where the data is corrupt. +One example of that would be when the buffer-switching interrupt has been too +slow, and the buffer has been filled completely. In that case, the last packet +in the buffer might be truncated and immediately followed by a PSB as the trace +continues in the next buffer. + +To disable the display of Intel PT packets, combine the -D option with +--no-itrace. + + +perf report +----------- + +By default, perf report will decode trace data found in the perf.data file. +This can be further controlled by new option --itrace exactly the same as +perf script, with the exception that the default is --itrace=igxe. + + +perf inject +----------- + +perf inject also accepts the --itrace option in which case tracing data is +removed and replaced with the synthesized events. e.g. + + perf inject --itrace -i perf.data -o perf.data.new + +Below is an example of using Intel PT with autofdo. It requires autofdo +(https://github.com/google/autofdo) and gcc version 5. The bubble +sort example is from the AutoFDO tutorial (https://gcc.gnu.org/wiki/AutoFDO/Tutorial) +amended to take the number of elements as a parameter. + + $ gcc-5 -O3 sort.c -o sort_optimized + $ ./sort_optimized 30000 + Bubble sorting array of 30000 elements + 2254 ms + + $ cat ~/.perfconfig + [intel-pt] + mispred-all = on + + $ perf record -e intel_pt//u ./sort 3000 + Bubble sorting array of 3000 elements + 58 ms + [ perf record: Woken up 2 times to write data ] + [ perf record: Captured and wrote 3.939 MB perf.data ] + $ perf inject -i perf.data -o inj --itrace=i100usle --strip + $ ./create_gcov --binary=./sort --profile=inj --gcov=sort.gcov -gcov_version=1 + $ gcc-5 -O3 -fauto-profile=sort.gcov sort.c -o sort_autofdo + $ ./sort_autofdo 30000 + Bubble sorting array of 30000 elements + 2155 ms + +Note there is currently no advantage to using Intel PT instead of LBR, but +that may change in the future if greater use is made of the data. + + +PEBS via Intel PT +----------------- + +Some hardware has the feature to redirect PEBS records to the Intel PT trace. +Recording is selected by using the aux-output config term e.g. + + perf record -c 10000 -e '{intel_pt/branch=0/,cycles/aux-output/ppp}' uname + +Note that currently, software only supports redirecting at most one PEBS event. + +To display PEBS events from the Intel PT trace, use the itrace 'o' option e.g. + + perf script --itrace=oe + + +SEE ALSO +-------- + +linkperf:perf-record[1], linkperf:perf-script[1], linkperf:perf-report[1], +linkperf:perf-inject[1] |