diff options
Diffstat (limited to 'tools/testing/selftests/net/mptcp/simult_flows.sh')
| -rwxr-xr-x | tools/testing/selftests/net/mptcp/simult_flows.sh | 294 |
1 files changed, 294 insertions, 0 deletions
diff --git a/tools/testing/selftests/net/mptcp/simult_flows.sh b/tools/testing/selftests/net/mptcp/simult_flows.sh new file mode 100755 index 000000000000..1b2366220388 --- /dev/null +++ b/tools/testing/selftests/net/mptcp/simult_flows.sh @@ -0,0 +1,294 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Double quotes to prevent globbing and word splitting is recommended in new +# code but we accept it, especially because there were too many before having +# address all other issues detected by shellcheck. +#shellcheck disable=SC2086 + +. "$(dirname "${0}")/mptcp_lib.sh" + +ns1="" +ns2="" +ns3="" +capture=false +timeout_poll=30 +timeout_test=$((timeout_poll * 2 + 1)) +# a bit more space: because we have more to display +MPTCP_LIB_TEST_FORMAT="%02u %-60s" +ret=0 +bail=0 +slack=50 +large="" +small="" +sout="" +cout="" +capout="" +size=0 + +usage() { + echo "Usage: $0 [ -b ] [ -c ] [ -d ]" + echo -e "\t-b: bail out after first error, otherwise runs al testcases" + echo -e "\t-c: capture packets for each test using tcpdump (default: no capture)" + echo -e "\t-d: debug this script" +} + +# This function is used in the cleanup trap +#shellcheck disable=SC2317 +cleanup() +{ + rm -f "$cout" "$sout" + rm -f "$large" "$small" + rm -f "$capout" + + mptcp_lib_ns_exit "${ns1}" "${ns2}" "${ns3}" +} + +mptcp_lib_check_mptcp +mptcp_lib_check_tools ip + +# "$ns1" ns2 ns3 +# ns1eth1 ns2eth1 ns2eth3 ns3eth1 +# netem +# ns1eth2 ns2eth2 +# netem + +setup() +{ + large=$(mktemp) + small=$(mktemp) + sout=$(mktemp) + cout=$(mktemp) + capout=$(mktemp) + size=$((2 * 2048 * 4096)) + + dd if=/dev/zero of=$small bs=4096 count=20 >/dev/null 2>&1 + dd if=/dev/zero of=$large bs=4096 count=$((size / 4096)) >/dev/null 2>&1 + + trap cleanup EXIT + + mptcp_lib_ns_init ns1 ns2 ns3 + + ip link add ns1eth1 netns "$ns1" type veth peer name ns2eth1 netns "$ns2" + ip link add ns1eth2 netns "$ns1" type veth peer name ns2eth2 netns "$ns2" + ip link add ns2eth3 netns "$ns2" type veth peer name ns3eth1 netns "$ns3" + + ip -net "$ns1" addr add 10.0.1.1/24 dev ns1eth1 + ip -net "$ns1" addr add dead:beef:1::1/64 dev ns1eth1 nodad + ip -net "$ns1" link set ns1eth1 up mtu 1500 + ip -net "$ns1" route add default via 10.0.1.2 + ip -net "$ns1" route add default via dead:beef:1::2 + + ip -net "$ns1" addr add 10.0.2.1/24 dev ns1eth2 + ip -net "$ns1" addr add dead:beef:2::1/64 dev ns1eth2 nodad + ip -net "$ns1" link set ns1eth2 up mtu 1500 + ip -net "$ns1" route add default via 10.0.2.2 metric 101 + ip -net "$ns1" route add default via dead:beef:2::2 metric 101 + + ip netns exec "$ns1" ./pm_nl_ctl limits 1 1 + ip netns exec "$ns1" ./pm_nl_ctl add 10.0.2.1 dev ns1eth2 flags subflow + + ip -net "$ns2" addr add 10.0.1.2/24 dev ns2eth1 + ip -net "$ns2" addr add dead:beef:1::2/64 dev ns2eth1 nodad + ip -net "$ns2" link set ns2eth1 up mtu 1500 + + ip -net "$ns2" addr add 10.0.2.2/24 dev ns2eth2 + ip -net "$ns2" addr add dead:beef:2::2/64 dev ns2eth2 nodad + ip -net "$ns2" link set ns2eth2 up mtu 1500 + + ip -net "$ns2" addr add 10.0.3.2/24 dev ns2eth3 + ip -net "$ns2" addr add dead:beef:3::2/64 dev ns2eth3 nodad + ip -net "$ns2" link set ns2eth3 up mtu 1500 + ip netns exec "$ns2" sysctl -q net.ipv4.ip_forward=1 + ip netns exec "$ns2" sysctl -q net.ipv6.conf.all.forwarding=1 + + ip -net "$ns3" addr add 10.0.3.3/24 dev ns3eth1 + ip -net "$ns3" addr add dead:beef:3::3/64 dev ns3eth1 nodad + ip -net "$ns3" link set ns3eth1 up mtu 1500 + ip -net "$ns3" route add default via 10.0.3.2 + ip -net "$ns3" route add default via dead:beef:3::2 + + ip netns exec "$ns3" ./pm_nl_ctl limits 1 1 + + # debug build can slow down measurably the test program + # we use quite tight time limit on the run-time, to ensure + # maximum B/W usage. + # Use kmemleak/lockdep/kasan/prove_locking presence as a rough + # estimate for this being a debug kernel and increase the + # maximum run-time accordingly. Observed run times for CI builds + # running selftests, including kbuild, were used to determine the + # amount of time to add. + grep -q ' kmemleak_init$\| lockdep_init$\| kasan_init$\| prove_locking$' /proc/kallsyms && slack=$((slack+550)) +} + +do_transfer() +{ + local cin=$1 + local sin=$2 + local max_time=$3 + local port + port=$((10000+MPTCP_LIB_TEST_COUNTER)) + + :> "$cout" + :> "$sout" + :> "$capout" + + if $capture; then + local capuser + local rndh="${ns1:4}" + if [ -z $SUDO_USER ] ; then + capuser="" + else + capuser="-Z $SUDO_USER" + fi + + local capfile="${rndh}-${port}" + local capopt="-i any -s 65535 -B 32768 ${capuser}" + + ip netns exec ${ns3} tcpdump ${capopt} -w "${capfile}-listener.pcap" >> "${capout}" 2>&1 & + local cappid_listener=$! + + ip netns exec ${ns1} tcpdump ${capopt} -w "${capfile}-connector.pcap" >> "${capout}" 2>&1 & + local cappid_connector=$! + + sleep 1 + fi + + timeout ${timeout_test} \ + ip netns exec ${ns3} \ + ./mptcp_connect -jt ${timeout_poll} -l -p $port -T $max_time \ + 0.0.0.0 < "$sin" > "$sout" & + local spid=$! + + mptcp_lib_wait_local_port_listen "${ns3}" "${port}" + + timeout ${timeout_test} \ + ip netns exec ${ns1} \ + ./mptcp_connect -jt ${timeout_poll} -p $port -T $max_time \ + 10.0.3.3 < "$cin" > "$cout" & + local cpid=$! + + wait $cpid + local retc=$? + wait $spid + local rets=$? + + if $capture; then + sleep 1 + kill ${cappid_listener} + kill ${cappid_connector} + fi + + cmp $sin $cout > /dev/null 2>&1 + local cmps=$? + cmp $cin $sout > /dev/null 2>&1 + local cmpc=$? + + printf "%-16s" " max $max_time " + if [ $retc -eq 0 ] && [ $rets -eq 0 ] && \ + [ $cmpc -eq 0 ] && [ $cmps -eq 0 ]; then + mptcp_lib_pr_ok + cat "$capout" + return 0 + fi + + mptcp_lib_pr_fail + echo "client exit code $retc, server $rets" 1>&2 + echo -e "\nnetns ${ns3} socket stat for $port:" 1>&2 + ip netns exec ${ns3} ss -nita 1>&2 -o "sport = :$port" + echo -e "\nnetns ${ns1} socket stat for $port:" 1>&2 + ip netns exec ${ns1} ss -nita 1>&2 -o "dport = :$port" + ls -l $sin $cout + ls -l $cin $sout + + cat "$capout" + return 1 +} + +run_test() +{ + local rate1=$1 + local rate2=$2 + local delay1=$3 + local delay2=$4 + local lret + local dev + shift 4 + local msg=$* + + [ $delay1 -gt 0 ] && delay1="delay $delay1" || delay1="" + [ $delay2 -gt 0 ] && delay2="delay $delay2" || delay2="" + + for dev in ns1eth1 ns1eth2; do + tc -n $ns1 qdisc del dev $dev root >/dev/null 2>&1 + done + for dev in ns2eth1 ns2eth2; do + tc -n $ns2 qdisc del dev $dev root >/dev/null 2>&1 + done + tc -n $ns1 qdisc add dev ns1eth1 root netem rate ${rate1}mbit $delay1 + tc -n $ns1 qdisc add dev ns1eth2 root netem rate ${rate2}mbit $delay2 + tc -n $ns2 qdisc add dev ns2eth1 root netem rate ${rate1}mbit $delay1 + tc -n $ns2 qdisc add dev ns2eth2 root netem rate ${rate2}mbit $delay2 + + # time is measured in ms, account for transfer size, aggregated link speed + # and header overhead (10%) + # ms byte -> bit 10% mbit -> kbit -> bit 10% + local time=$((1000 * size * 8 * 10 / ((rate1 + rate2) * 1000 * 1000 * 9) )) + + # mptcp_connect will do some sleeps to allow the mp_join handshake + # completion (see mptcp_connect): 200ms on each side, add some slack + time=$((time + 400 + slack)) + + mptcp_lib_print_title "$msg" + do_transfer $small $large $time + lret=$? + mptcp_lib_result_code "${lret}" "${msg}" + if [ $lret -ne 0 ]; then + ret=$lret + [ $bail -eq 0 ] || exit $ret + fi + + msg+=" - reverse direction" + mptcp_lib_print_title "${msg}" + do_transfer $large $small $time + lret=$? + mptcp_lib_result_code "${lret}" "${msg}" + if [ $lret -ne 0 ]; then + ret=$lret + [ $bail -eq 0 ] || exit $ret + fi +} + +while getopts "bcdh" option;do + case "$option" in + "h") + usage $0 + exit ${KSFT_PASS} + ;; + "b") + bail=1 + ;; + "c") + capture=true + ;; + "d") + set -x + ;; + "?") + usage $0 + exit ${KSFT_FAIL} + ;; + esac +done + +setup +run_test 10 10 0 0 "balanced bwidth" +run_test 10 10 1 25 "balanced bwidth with unbalanced delay" + +# we still need some additional infrastructure to pass the following test-cases +run_test 10 3 0 0 "unbalanced bwidth" +run_test 10 3 1 25 "unbalanced bwidth with unbalanced delay" +run_test 10 3 25 1 "unbalanced bwidth with opposed, unbalanced delay" + +mptcp_lib_result_print_all_tap +exit $ret |