diff options
Diffstat (limited to 'tools/testing/selftests')
| -rw-r--r-- | tools/testing/selftests/filesystems/epoll/epoll_wakeup_test.c | 146 | ||||
| -rwxr-xr-x | tools/testing/selftests/ftrace/ftracetest | 32 | ||||
| -rw-r--r-- | tools/testing/selftests/kvm/Makefile | 29 | ||||
| -rw-r--r-- | tools/testing/selftests/kvm/include/evmcs.h | 4 | ||||
| -rw-r--r-- | tools/testing/selftests/kvm/lib/x86_64/vmx.c | 3 | ||||
| -rw-r--r-- | tools/testing/selftests/net/tcp_mmap.c | 7 | ||||
| -rwxr-xr-x | tools/testing/selftests/wireguard/netns.sh | 54 | ||||
| -rw-r--r-- | tools/testing/selftests/wireguard/qemu/arch/powerpc64le.config | 1 | ||||
| -rw-r--r-- | tools/testing/selftests/wireguard/qemu/debug.config | 1 |
9 files changed, 266 insertions, 11 deletions
diff --git a/tools/testing/selftests/filesystems/epoll/epoll_wakeup_test.c b/tools/testing/selftests/filesystems/epoll/epoll_wakeup_test.c index 11eee0b60040..d979ff14775a 100644 --- a/tools/testing/selftests/filesystems/epoll/epoll_wakeup_test.c +++ b/tools/testing/selftests/filesystems/epoll/epoll_wakeup_test.c @@ -3,6 +3,7 @@ #define _GNU_SOURCE #include <poll.h> #include <unistd.h> +#include <assert.h> #include <signal.h> #include <pthread.h> #include <sys/epoll.h> @@ -3136,4 +3137,149 @@ TEST(epoll59) close(ctx.sfd[0]); } +enum { + EPOLL60_EVENTS_NR = 10, +}; + +struct epoll60_ctx { + volatile int stopped; + int ready; + int waiters; + int epfd; + int evfd[EPOLL60_EVENTS_NR]; +}; + +static void *epoll60_wait_thread(void *ctx_) +{ + struct epoll60_ctx *ctx = ctx_; + struct epoll_event e; + sigset_t sigmask; + uint64_t v; + int ret; + + /* Block SIGUSR1 */ + sigemptyset(&sigmask); + sigaddset(&sigmask, SIGUSR1); + sigprocmask(SIG_SETMASK, &sigmask, NULL); + + /* Prepare empty mask for epoll_pwait() */ + sigemptyset(&sigmask); + + while (!ctx->stopped) { + /* Mark we are ready */ + __atomic_fetch_add(&ctx->ready, 1, __ATOMIC_ACQUIRE); + + /* Start when all are ready */ + while (__atomic_load_n(&ctx->ready, __ATOMIC_ACQUIRE) && + !ctx->stopped); + + /* Account this waiter */ + __atomic_fetch_add(&ctx->waiters, 1, __ATOMIC_ACQUIRE); + + ret = epoll_pwait(ctx->epfd, &e, 1, 2000, &sigmask); + if (ret != 1) { + /* We expect only signal delivery on stop */ + assert(ret < 0 && errno == EINTR && "Lost wakeup!\n"); + assert(ctx->stopped); + break; + } + + ret = read(e.data.fd, &v, sizeof(v)); + /* Since we are on ET mode, thus each thread gets its own fd. */ + assert(ret == sizeof(v)); + + __atomic_fetch_sub(&ctx->waiters, 1, __ATOMIC_RELEASE); + } + + return NULL; +} + +static inline unsigned long long msecs(void) +{ + struct timespec ts; + unsigned long long msecs; + + clock_gettime(CLOCK_REALTIME, &ts); + msecs = ts.tv_sec * 1000ull; + msecs += ts.tv_nsec / 1000000ull; + + return msecs; +} + +static inline int count_waiters(struct epoll60_ctx *ctx) +{ + return __atomic_load_n(&ctx->waiters, __ATOMIC_ACQUIRE); +} + +TEST(epoll60) +{ + struct epoll60_ctx ctx = { 0 }; + pthread_t waiters[ARRAY_SIZE(ctx.evfd)]; + struct epoll_event e; + int i, n, ret; + + signal(SIGUSR1, signal_handler); + + ctx.epfd = epoll_create1(0); + ASSERT_GE(ctx.epfd, 0); + + /* Create event fds */ + for (i = 0; i < ARRAY_SIZE(ctx.evfd); i++) { + ctx.evfd[i] = eventfd(0, EFD_NONBLOCK); + ASSERT_GE(ctx.evfd[i], 0); + + e.events = EPOLLIN | EPOLLET; + e.data.fd = ctx.evfd[i]; + ASSERT_EQ(epoll_ctl(ctx.epfd, EPOLL_CTL_ADD, ctx.evfd[i], &e), 0); + } + + /* Create waiter threads */ + for (i = 0; i < ARRAY_SIZE(waiters); i++) + ASSERT_EQ(pthread_create(&waiters[i], NULL, + epoll60_wait_thread, &ctx), 0); + + for (i = 0; i < 300; i++) { + uint64_t v = 1, ms; + + /* Wait for all to be ready */ + while (__atomic_load_n(&ctx.ready, __ATOMIC_ACQUIRE) != + ARRAY_SIZE(ctx.evfd)) + ; + + /* Steady, go */ + __atomic_fetch_sub(&ctx.ready, ARRAY_SIZE(ctx.evfd), + __ATOMIC_ACQUIRE); + + /* Wait all have gone to kernel */ + while (count_waiters(&ctx) != ARRAY_SIZE(ctx.evfd)) + ; + + /* 1ms should be enough to schedule away */ + usleep(1000); + + /* Quickly signal all handles at once */ + for (n = 0; n < ARRAY_SIZE(ctx.evfd); n++) { + ret = write(ctx.evfd[n], &v, sizeof(v)); + ASSERT_EQ(ret, sizeof(v)); + } + + /* Busy loop for 1s and wait for all waiters to wake up */ + ms = msecs(); + while (count_waiters(&ctx) && msecs() < ms + 1000) + ; + + ASSERT_EQ(count_waiters(&ctx), 0); + } + ctx.stopped = 1; + /* Stop waiters */ + for (i = 0; i < ARRAY_SIZE(waiters); i++) + ret = pthread_kill(waiters[i], SIGUSR1); + for (i = 0; i < ARRAY_SIZE(waiters); i++) + pthread_join(waiters[i], NULL); + + for (i = 0; i < ARRAY_SIZE(waiters); i++) + close(ctx.evfd[i]); + close(ctx.epfd); +} + TEST_HARNESS_MAIN diff --git a/tools/testing/selftests/ftrace/ftracetest b/tools/testing/selftests/ftrace/ftracetest index 063ecb290a5a..a4605b5ee66d 100755 --- a/tools/testing/selftests/ftrace/ftracetest +++ b/tools/testing/selftests/ftrace/ftracetest @@ -17,6 +17,7 @@ echo " -v|--verbose Increase verbosity of test messages" echo " -vv Alias of -v -v (Show all results in stdout)" echo " -vvv Alias of -v -v -v (Show all commands immediately)" echo " --fail-unsupported Treat UNSUPPORTED as a failure" +echo " --fail-unresolved Treat UNRESOLVED as a failure" echo " -d|--debug Debug mode (trace all shell commands)" echo " -l|--logdir <dir> Save logs on the <dir>" echo " If <dir> is -, all logs output in console only" @@ -29,8 +30,25 @@ err_ret=1 # kselftest skip code is 4 err_skip=4 +# cgroup RT scheduling prevents chrt commands from succeeding, which +# induces failures in test wakeup tests. Disable for the duration of +# the tests. + +readonly sched_rt_runtime=/proc/sys/kernel/sched_rt_runtime_us + +sched_rt_runtime_orig=$(cat $sched_rt_runtime) + +setup() { + echo -1 > $sched_rt_runtime +} + +cleanup() { + echo $sched_rt_runtime_orig > $sched_rt_runtime +} + errexit() { # message echo "Error: $1" 1>&2 + cleanup exit $err_ret } @@ -39,6 +57,8 @@ if [ `id -u` -ne 0 ]; then errexit "this must be run by root user" fi +setup + # Utilities absdir() { # file_path (cd `dirname $1`; pwd) @@ -93,6 +113,10 @@ parse_opts() { # opts UNSUPPORTED_RESULT=1 shift 1 ;; + --fail-unresolved) + UNRESOLVED_RESULT=1 + shift 1 + ;; --logdir|-l) LOG_DIR=$2 shift 2 @@ -157,6 +181,7 @@ KEEP_LOG=0 DEBUG=0 VERBOSE=0 UNSUPPORTED_RESULT=0 +UNRESOLVED_RESULT=0 STOP_FAILURE=0 # Parse command-line options parse_opts $* @@ -235,6 +260,7 @@ TOTAL_RESULT=0 INSTANCE= CASENO=0 + testcase() { # testfile CASENO=$((CASENO+1)) desc=`grep "^#[ \t]*description:" $1 | cut -f2 -d:` @@ -260,7 +286,7 @@ eval_result() { # sigval $UNRESOLVED) prlog " [${color_blue}UNRESOLVED${color_reset}]" UNRESOLVED_CASES="$UNRESOLVED_CASES $CASENO" - return 1 # this is a kind of bug.. something happened. + return $UNRESOLVED_RESULT # depends on use case ;; $UNTESTED) prlog " [${color_blue}UNTESTED${color_reset}]" @@ -273,7 +299,7 @@ eval_result() { # sigval return $UNSUPPORTED_RESULT # depends on use case ;; $XFAIL) - prlog " [${color_red}XFAIL${color_reset}]" + prlog " [${color_green}XFAIL${color_reset}]" XFAILED_CASES="$XFAILED_CASES $CASENO" return 0 ;; @@ -406,5 +432,7 @@ prlog "# of unsupported: " `echo $UNSUPPORTED_CASES | wc -w` prlog "# of xfailed: " `echo $XFAILED_CASES | wc -w` prlog "# of undefined(test bug): " `echo $UNDEFINED_CASES | wc -w` +cleanup + # if no error, return 0 exit $TOTAL_RESULT diff --git a/tools/testing/selftests/kvm/Makefile b/tools/testing/selftests/kvm/Makefile index 712a2ddd2a27..b728c0a0f9b2 100644 --- a/tools/testing/selftests/kvm/Makefile +++ b/tools/testing/selftests/kvm/Makefile @@ -5,8 +5,34 @@ all: top_srcdir = ../../../.. KSFT_KHDR_INSTALL := 1 + +# For cross-builds to work, UNAME_M has to map to ARCH and arch specific +# directories and targets in this Makefile. "uname -m" doesn't map to +# arch specific sub-directory names. +# +# UNAME_M variable to used to run the compiles pointing to the right arch +# directories and build the right targets for these supported architectures. +# +# TEST_GEN_PROGS and LIBKVM are set using UNAME_M variable. +# LINUX_TOOL_ARCH_INCLUDE is set using ARCH variable. +# +# x86_64 targets are named to include x86_64 as a suffix and directories +# for includes are in x86_64 sub-directory. s390x and aarch64 follow the +# same convention. "uname -m" doesn't result in the correct mapping for +# s390x and aarch64. +# +# No change necessary for x86_64 UNAME_M := $(shell uname -m) +# Set UNAME_M for arm64 compile/install to work +ifeq ($(ARCH),arm64) + UNAME_M := aarch64 +endif +# Set UNAME_M s390x compile/install to work +ifeq ($(ARCH),s390) + UNAME_M := s390x +endif + LIBKVM = lib/assert.c lib/elf.c lib/io.c lib/kvm_util.c lib/sparsebit.c lib/test_util.c LIBKVM_x86_64 = lib/x86_64/processor.c lib/x86_64/vmx.c lib/x86_64/svm.c lib/x86_64/ucall.c LIBKVM_aarch64 = lib/aarch64/processor.c lib/aarch64/ucall.c @@ -53,7 +79,7 @@ LIBKVM += $(LIBKVM_$(UNAME_M)) INSTALL_HDR_PATH = $(top_srcdir)/usr LINUX_HDR_PATH = $(INSTALL_HDR_PATH)/include/ LINUX_TOOL_INCLUDE = $(top_srcdir)/tools/include -LINUX_TOOL_ARCH_INCLUDE = $(top_srcdir)/tools/arch/x86/include +LINUX_TOOL_ARCH_INCLUDE = $(top_srcdir)/tools/arch/$(ARCH)/include CFLAGS += -Wall -Wstrict-prototypes -Wuninitialized -O2 -g -std=gnu99 \ -fno-stack-protector -fno-PIE -I$(LINUX_TOOL_INCLUDE) \ -I$(LINUX_TOOL_ARCH_INCLUDE) -I$(LINUX_HDR_PATH) -Iinclude \ @@ -84,6 +110,7 @@ $(LIBKVM_OBJ): $(OUTPUT)/%.o: %.c $(OUTPUT)/libkvm.a: $(LIBKVM_OBJ) $(AR) crs $@ $^ +x := $(shell mkdir -p $(sort $(dir $(TEST_GEN_PROGS)))) all: $(STATIC_LIBS) $(TEST_GEN_PROGS): $(STATIC_LIBS) diff --git a/tools/testing/selftests/kvm/include/evmcs.h b/tools/testing/selftests/kvm/include/evmcs.h index d8f4d6bfe05d..a034438b6266 100644 --- a/tools/testing/selftests/kvm/include/evmcs.h +++ b/tools/testing/selftests/kvm/include/evmcs.h @@ -219,8 +219,8 @@ struct hv_enlightened_vmcs { #define HV_X64_MSR_VP_ASSIST_PAGE_ADDRESS_MASK \ (~((1ull << HV_X64_MSR_VP_ASSIST_PAGE_ADDRESS_SHIFT) - 1)) -struct hv_enlightened_vmcs *current_evmcs; -struct hv_vp_assist_page *current_vp_assist; +extern struct hv_enlightened_vmcs *current_evmcs; +extern struct hv_vp_assist_page *current_vp_assist; int vcpu_enable_evmcs(struct kvm_vm *vm, int vcpu_id); diff --git a/tools/testing/selftests/kvm/lib/x86_64/vmx.c b/tools/testing/selftests/kvm/lib/x86_64/vmx.c index 6f17f69394be..4ae104f6ce69 100644 --- a/tools/testing/selftests/kvm/lib/x86_64/vmx.c +++ b/tools/testing/selftests/kvm/lib/x86_64/vmx.c @@ -17,6 +17,9 @@ bool enable_evmcs; +struct hv_enlightened_vmcs *current_evmcs; +struct hv_vp_assist_page *current_vp_assist; + struct eptPageTableEntry { uint64_t readable:1; uint64_t writable:1; diff --git a/tools/testing/selftests/net/tcp_mmap.c b/tools/testing/selftests/net/tcp_mmap.c index 35505b31e5cc..4555f88252ba 100644 --- a/tools/testing/selftests/net/tcp_mmap.c +++ b/tools/testing/selftests/net/tcp_mmap.c @@ -165,9 +165,10 @@ void *child_thread(void *arg) socklen_t zc_len = sizeof(zc); int res; + memset(&zc, 0, sizeof(zc)); zc.address = (__u64)((unsigned long)addr); zc.length = chunk_size; - zc.recv_skip_hint = 0; + res = getsockopt(fd, IPPROTO_TCP, TCP_ZEROCOPY_RECEIVE, &zc, &zc_len); if (res == -1) @@ -281,12 +282,14 @@ static void setup_sockaddr(int domain, const char *str_addr, static void do_accept(int fdlisten) { pthread_attr_t attr; + int rcvlowat; pthread_attr_init(&attr); pthread_attr_setdetachstate(&attr, PTHREAD_CREATE_DETACHED); + rcvlowat = chunk_size; if (setsockopt(fdlisten, SOL_SOCKET, SO_RCVLOWAT, - &chunk_size, sizeof(chunk_size)) == -1) { + &rcvlowat, sizeof(rcvlowat)) == -1) { perror("setsockopt SO_RCVLOWAT"); } diff --git a/tools/testing/selftests/wireguard/netns.sh b/tools/testing/selftests/wireguard/netns.sh index 936e1ca9410e..17a1f53ceba0 100755 --- a/tools/testing/selftests/wireguard/netns.sh +++ b/tools/testing/selftests/wireguard/netns.sh @@ -48,8 +48,11 @@ cleanup() { exec 2>/dev/null printf "$orig_message_cost" > /proc/sys/net/core/message_cost ip0 link del dev wg0 + ip0 link del dev wg1 ip1 link del dev wg0 + ip1 link del dev wg1 ip2 link del dev wg0 + ip2 link del dev wg1 local to_kill="$(ip netns pids $netns0) $(ip netns pids $netns1) $(ip netns pids $netns2)" [[ -n $to_kill ]] && kill $to_kill pp ip netns del $netns1 @@ -77,18 +80,20 @@ ip0 link set wg0 netns $netns2 key1="$(pp wg genkey)" key2="$(pp wg genkey)" key3="$(pp wg genkey)" +key4="$(pp wg genkey)" pub1="$(pp wg pubkey <<<"$key1")" pub2="$(pp wg pubkey <<<"$key2")" pub3="$(pp wg pubkey <<<"$key3")" +pub4="$(pp wg pubkey <<<"$key4")" psk="$(pp wg genpsk)" [[ -n $key1 && -n $key2 && -n $psk ]] configure_peers() { ip1 addr add 192.168.241.1/24 dev wg0 - ip1 addr add fd00::1/24 dev wg0 + ip1 addr add fd00::1/112 dev wg0 ip2 addr add 192.168.241.2/24 dev wg0 - ip2 addr add fd00::2/24 dev wg0 + ip2 addr add fd00::2/112 dev wg0 n1 wg set wg0 \ private-key <(echo "$key1") \ @@ -230,9 +235,38 @@ n1 ping -W 1 -c 1 192.168.241.2 n1 wg set wg0 private-key <(echo "$key3") n2 wg set wg0 peer "$pub3" preshared-key <(echo "$psk") allowed-ips 192.168.241.1/32 peer "$pub1" remove n1 ping -W 1 -c 1 192.168.241.2 +n2 wg set wg0 peer "$pub3" remove + +# Test that we can route wg through wg +ip1 addr flush dev wg0 +ip2 addr flush dev wg0 +ip1 addr add fd00::5:1/112 dev wg0 +ip2 addr add fd00::5:2/112 dev wg0 +n1 wg set wg0 private-key <(echo "$key1") peer "$pub2" preshared-key <(echo "$psk") allowed-ips fd00::5:2/128 endpoint 127.0.0.1:2 +n2 wg set wg0 private-key <(echo "$key2") listen-port 2 peer "$pub1" preshared-key <(echo "$psk") allowed-ips fd00::5:1/128 endpoint 127.212.121.99:9998 +ip1 link add wg1 type wireguard +ip2 link add wg1 type wireguard +ip1 addr add 192.168.241.1/24 dev wg1 +ip1 addr add fd00::1/112 dev wg1 +ip2 addr add 192.168.241.2/24 dev wg1 +ip2 addr add fd00::2/112 dev wg1 +ip1 link set mtu 1340 up dev wg1 +ip2 link set mtu 1340 up dev wg1 +n1 wg set wg1 listen-port 5 private-key <(echo "$key3") peer "$pub4" allowed-ips 192.168.241.2/32,fd00::2/128 endpoint [fd00::5:2]:5 +n2 wg set wg1 listen-port 5 private-key <(echo "$key4") peer "$pub3" allowed-ips 192.168.241.1/32,fd00::1/128 endpoint [fd00::5:1]:5 +tests +# Try to set up a routing loop between the two namespaces +ip1 link set netns $netns0 dev wg1 +ip0 addr add 192.168.241.1/24 dev wg1 +ip0 link set up dev wg1 +n0 ping -W 1 -c 1 192.168.241.2 +n1 wg set wg0 peer "$pub2" endpoint 192.168.241.2:7 +ip2 link del wg0 +ip2 link del wg1 +! n0 ping -W 1 -c 10 -f 192.168.241.2 || false # Should not crash kernel +ip0 link del wg1 ip1 link del wg0 -ip2 link del wg0 # Test using NAT. We now change the topology to this: # ┌────────────────────────────────────────┐ ┌────────────────────────────────────────────────┐ ┌────────────────────────────────────────┐ @@ -282,6 +316,20 @@ pp sleep 3 n2 ping -W 1 -c 1 192.168.241.1 n1 wg set wg0 peer "$pub2" persistent-keepalive 0 +# Test that onion routing works, even when it loops +n1 wg set wg0 peer "$pub3" allowed-ips 192.168.242.2/32 endpoint 192.168.241.2:5 +ip1 addr add 192.168.242.1/24 dev wg0 +ip2 link add wg1 type wireguard +ip2 addr add 192.168.242.2/24 dev wg1 +n2 wg set wg1 private-key <(echo "$key3") listen-port 5 peer "$pub1" allowed-ips 192.168.242.1/32 +ip2 link set wg1 up +n1 ping -W 1 -c 1 192.168.242.2 +ip2 link del wg1 +n1 wg set wg0 peer "$pub3" endpoint 192.168.242.2:5 +! n1 ping -W 1 -c 1 192.168.242.2 || false # Should not crash kernel +n1 wg set wg0 peer "$pub3" remove +ip1 addr del 192.168.242.1/24 dev wg0 + # Do a wg-quick(8)-style policy routing for the default route, making sure vethc has a v6 address to tease out bugs. ip1 -6 addr add fc00::9/96 dev vethc ip1 -6 route add default via fc00::1 diff --git a/tools/testing/selftests/wireguard/qemu/arch/powerpc64le.config b/tools/testing/selftests/wireguard/qemu/arch/powerpc64le.config index 990c510a9cfa..f52f1e2bc7f6 100644 --- a/tools/testing/selftests/wireguard/qemu/arch/powerpc64le.config +++ b/tools/testing/selftests/wireguard/qemu/arch/powerpc64le.config @@ -10,3 +10,4 @@ CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=hvc0 wg.success=hvc1" CONFIG_SECTION_MISMATCH_WARN_ONLY=y CONFIG_FRAME_WARN=1280 +CONFIG_THREAD_SHIFT=14 diff --git a/tools/testing/selftests/wireguard/qemu/debug.config b/tools/testing/selftests/wireguard/qemu/debug.config index 5909e7ef2a5c..9803dbb54181 100644 --- a/tools/testing/selftests/wireguard/qemu/debug.config +++ b/tools/testing/selftests/wireguard/qemu/debug.config @@ -25,7 +25,6 @@ CONFIG_KASAN=y CONFIG_KASAN_INLINE=y CONFIG_UBSAN=y CONFIG_UBSAN_SANITIZE_ALL=y -CONFIG_UBSAN_NO_ALIGNMENT=y CONFIG_UBSAN_NULL=y CONFIG_DEBUG_KMEMLEAK=y CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=8192 |