diff options
Diffstat (limited to 'tools')
| -rw-r--r-- | tools/firewire/nosy-dump.c | 4 | ||||
| -rw-r--r-- | tools/perf/Documentation/perf-record.txt | 2 | ||||
| -rwxr-xr-x | tools/testing/ktest/ktest.pl | 120 | ||||
| -rw-r--r-- | tools/testing/ktest/sample.conf | 46 | ||||
| -rw-r--r-- | tools/virtio/virtio_test.c | 2 |
5 files changed, 164 insertions, 10 deletions
diff --git a/tools/firewire/nosy-dump.c b/tools/firewire/nosy-dump.c index f93b776370b6..3179c711bd65 100644 --- a/tools/firewire/nosy-dump.c +++ b/tools/firewire/nosy-dump.c @@ -150,6 +150,8 @@ subaction_create(uint32_t *data, size_t length) /* we put the ack in the subaction struct for easy access. */ sa = malloc(sizeof *sa - sizeof sa->packet + length); + if (!sa) + exit(EXIT_FAILURE); sa->ack = data[length / 4 - 1]; sa->length = length; memcpy(&sa->packet, data, length); @@ -180,6 +182,8 @@ link_transaction_lookup(int request_node, int response_node, int tlabel) } t = malloc(sizeof *t); + if (!t) + exit(EXIT_FAILURE); t->request_node = request_node; t->response_node = response_node; t->tlabel = tlabel; diff --git a/tools/perf/Documentation/perf-record.txt b/tools/perf/Documentation/perf-record.txt index b38a1f9ad460..938e8904f64d 100644 --- a/tools/perf/Documentation/perf-record.txt +++ b/tools/perf/Documentation/perf-record.txt @@ -175,7 +175,7 @@ following filters are defined: + The option requires at least one branch type among any, any_call, any_ret, ind_call. -The privilege levels may be ommitted, in which case, the privilege levels of the associated +The privilege levels may be omitted, in which case, the privilege levels of the associated event are applied to the branch filter. Both kernel (k) and hypervisor (hv) privilege levels are subject to permissions. When sampling on multiple events, branch stack sampling is enabled for all the sampling events. The sampled branch type is the same for all events. diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index c7ba7614061b..35fc584a4ffe 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -53,6 +53,9 @@ my %default = ( "STOP_AFTER_FAILURE" => 60, "STOP_TEST_AFTER" => 600, "MAX_MONITOR_WAIT" => 1800, + "GRUB_REBOOT" => "grub2-reboot", + "SYSLINUX" => "extlinux", + "SYSLINUX_PATH" => "/boot/extlinux", # required, and we will ask users if they don't have them but we keep the default # value something that is common. @@ -105,7 +108,12 @@ my $scp_to_target; my $scp_to_target_install; my $power_off; my $grub_menu; +my $grub_file; my $grub_number; +my $grub_reboot; +my $syslinux; +my $syslinux_path; +my $syslinux_label; my $target; my $make; my $pre_install; @@ -232,6 +240,11 @@ my %option_map = ( "ADD_CONFIG" => \$addconfig, "REBOOT_TYPE" => \$reboot_type, "GRUB_MENU" => \$grub_menu, + "GRUB_FILE" => \$grub_file, + "GRUB_REBOOT" => \$grub_reboot, + "SYSLINUX" => \$syslinux, + "SYSLINUX_PATH" => \$syslinux_path, + "SYSLINUX_LABEL" => \$syslinux_label, "PRE_INSTALL" => \$pre_install, "POST_INSTALL" => \$post_install, "NO_INSTALL" => \$no_install, @@ -368,7 +381,7 @@ EOF ; $config_help{"REBOOT_TYPE"} = << "EOF" Way to reboot the box to the test kernel. - Only valid options so far are "grub" and "script". + Only valid options so far are "grub", "grub2", "syslinux", and "script". If you specify grub, it will assume grub version 1 and will search in /boot/grub/menu.lst for the title \$GRUB_MENU @@ -378,11 +391,19 @@ $config_help{"REBOOT_TYPE"} = << "EOF" The entry in /boot/grub/menu.lst must be entered in manually. The test will not modify that file. + + If you specify grub2, then you also need to specify both \$GRUB_MENU + and \$GRUB_FILE. + + If you specify syslinux, then you may use SYSLINUX to define the syslinux + command (defaults to extlinux), and SYSLINUX_PATH to specify the path to + the syslinux install (defaults to /boot/extlinux). But you have to specify + SYSLINUX_LABEL to define the label to boot to for the test kernel. EOF ; $config_help{"GRUB_MENU"} = << "EOF" The grub title name for the test kernel to boot - (Only mandatory if REBOOT_TYPE = grub) + (Only mandatory if REBOOT_TYPE = grub or grub2) Note, ktest.pl will not update the grub menu.lst, you need to manually add an option for the test. ktest.pl will search @@ -393,6 +414,22 @@ $config_help{"GRUB_MENU"} = << "EOF" title Test Kernel kernel vmlinuz-test GRUB_MENU = Test Kernel + + For grub2, a search of \$GRUB_FILE is performed for the lines + that begin with "menuentry". It will not detect submenus. The + menu must be a non-nested menu. Add the quotes used in the menu + to guarantee your selection, as the first menuentry with the content + of \$GRUB_MENU that is found will be used. +EOF + ; +$config_help{"GRUB_FILE"} = << "EOF" + If grub2 is used, the full path for the grub.cfg file is placed + here. Use something like /boot/grub2/grub.cfg to search. +EOF + ; +$config_help{"SYSLINUX_LABEL"} = << "EOF" + If syslinux is used, the label that boots the target kernel must + be specified with SYSLINUX_LABEL. EOF ; $config_help{"REBOOT_SCRIPT"} = << "EOF" @@ -521,6 +558,15 @@ sub get_ktest_configs { if ($rtype eq "grub") { get_ktest_config("GRUB_MENU"); } + + if ($rtype eq "grub2") { + get_ktest_config("GRUB_MENU"); + get_ktest_config("GRUB_FILE"); + } + + if ($rtype eq "syslinux") { + get_ktest_config("SYSLINUX_LABEL"); + } } sub process_variables { @@ -1123,6 +1169,9 @@ sub wait_for_monitor; sub reboot { my ($time) = @_; + # Make sure everything has been written to disk + run_ssh("sync"); + if (defined($time)) { start_monitor; # flush out current monitor @@ -1452,8 +1501,44 @@ sub run_scp_mod { return run_scp($src, $dst, $cp_scp); } +sub get_grub2_index { + + return if (defined($grub_number)); + + doprint "Find grub2 menu ... "; + $grub_number = -1; + + my $ssh_grub = $ssh_exec; + $ssh_grub =~ s,\$SSH_COMMAND,cat $grub_file,g; + + open(IN, "$ssh_grub |") + or die "unable to get $grub_file"; + + my $found = 0; + + while (<IN>) { + if (/^menuentry.*$grub_menu/) { + $grub_number++; + $found = 1; + last; + } elsif (/^menuentry\s/) { + $grub_number++; + } + } + close(IN); + + die "Could not find '$grub_menu' in $grub_file on $machine" + if (!$found); + doprint "$grub_number\n"; +} + sub get_grub_index { + if ($reboot_type eq "grub2") { + get_grub2_index; + return; + } + if ($reboot_type ne "grub") { return; } @@ -1524,6 +1609,10 @@ sub reboot_to { if ($reboot_type eq "grub") { run_ssh "'(echo \"savedefault --default=$grub_number --once\" | grub --batch)'"; + } elsif ($reboot_type eq "grub2") { + run_ssh "$grub_reboot $grub_number"; + } elsif ($reboot_type eq "syslinux") { + run_ssh "$syslinux --once \\\"$syslinux_label\\\" $syslinux_path"; } elsif (defined $reboot_script) { run_command "$reboot_script"; } @@ -1718,6 +1807,14 @@ sub do_post_install { dodie "Failed to run post install"; } +# Sometimes the reboot fails, and will hang. We try to ssh to the box +# and if we fail, we force another reboot, that should powercycle it. +sub test_booted { + if (!run_ssh "echo testing connection") { + reboot $sleep_time; + } +} + sub install { return if ($no_install); @@ -1730,6 +1827,8 @@ sub install { my $cp_target = eval_kernel_version $target_image; + test_booted; + run_scp_install "$outputdir/$build_target", "$cp_target" or dodie "failed to copy image"; @@ -1877,10 +1976,14 @@ sub make_oldconfig { if (!run_command "$make olddefconfig") { # Perhaps olddefconfig doesn't exist in this version of the kernel - # try a yes '' | oldconfig - doprint "olddefconfig failed, trying yes '' | make oldconfig\n"; - run_command "yes '' | $make oldconfig" or - dodie "failed make config oldconfig"; + # try oldnoconfig + doprint "olddefconfig failed, trying make oldnoconfig\n"; + if (!run_command "$make oldnoconfig") { + doprint "oldnoconfig failed, trying yes '' | make oldconfig\n"; + # try a yes '' | oldconfig + run_command "yes '' | $make oldconfig" or + dodie "failed make config oldconfig"; + } } } @@ -3700,6 +3803,11 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { $target = "$ssh_user\@$machine"; if ($reboot_type eq "grub") { dodie "GRUB_MENU not defined" if (!defined($grub_menu)); + } elsif ($reboot_type eq "grub2") { + dodie "GRUB_MENU not defined" if (!defined($grub_menu)); + dodie "GRUB_FILE not defined" if (!defined($grub_file)); + } elsif ($reboot_type eq "syslinux") { + dodie "SYSLINUX_LABEL not defined" if (!defined($syslinux_label)); } } diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf index de28a0a3b8fc..4012e9330344 100644 --- a/tools/testing/ktest/sample.conf +++ b/tools/testing/ktest/sample.conf @@ -332,8 +332,18 @@ # from other linux builds on the system. #LOCALVERSION = -test +# For REBOOT_TYPE = grub2, you must specify where the grub.cfg +# file is. This is the file that is searched to find the menu +# option to boot to with GRUB_REBOOT +#GRUB_FILE = /boot/grub2/grub.cfg + +# The tool for REBOOT_TYPE = grub2 to set the next reboot kernel +# to boot into (one shot mode). +# (default grub2_reboot) +#GRUB_REBOOT = grub2_reboot + # The grub title name for the test kernel to boot -# (Only mandatory if REBOOT_TYPE = grub) +# (Only mandatory if REBOOT_TYPE = grub or grub2) # # Note, ktest.pl will not update the grub menu.lst, you need to # manually add an option for the test. ktest.pl will search @@ -343,8 +353,33 @@ # For example, if in the /boot/grub/menu.lst the test kernel title has: # title Test Kernel # kernel vmlinuz-test +# +# For grub2, a search of top level "menuentry"s are done. No +# submenu is searched. The menu is found by searching for the +# contents of GRUB_MENU in the line that starts with "menuentry". +# You may want to include the quotes around the option. For example: +# for: menuentry 'Test Kernel' +# do a: GRUB_MENU = 'Test Kernel' +# For customizing, add your entry in /etc/grub.d/40_custom. +# #GRUB_MENU = Test Kernel +# For REBOOT_TYPE = syslinux, the name of the syslinux executable +# (on the target) to use to set up the next reboot to boot the +# test kernel. +# (default extlinux) +#SYSLINUX = syslinux + +# For REBOOT_TYPE = syslinux, the path that is passed to to the +# syslinux command where syslinux is installed. +# (default /boot/extlinux) +#SYSLINUX_PATH = /boot/syslinux + +# For REBOOT_TYPE = syslinux, the syslinux label that references the +# test kernel in the syslinux config file. +# (default undefined) +#SYSLINUX_LABEL = "test-kernel" + # A script to reboot the target into the test kernel # This and SWITCH_TO_TEST are about the same, except # SWITCH_TO_TEST is run even for REBOOT_TYPE = grub. @@ -497,7 +532,7 @@ #POST_BUILD_DIE = 1 # Way to reboot the box to the test kernel. -# Only valid options so far are "grub" and "script" +# Only valid options so far are "grub", "grub2", "syslinux" and "script" # (default grub) # If you specify grub, it will assume grub version 1 # and will search in /boot/grub/menu.lst for the title $GRUB_MENU @@ -505,6 +540,13 @@ # your setup, then specify "script" and have a command or script # specified in REBOOT_SCRIPT to boot to the target. # +# For REBOOT_TYPE = grub2, you must define both GRUB_MENU and +# GRUB_FILE. +# +# For REBOOT_TYPE = syslinux, you must define SYSLINUX_LABEL, and +# perhaps modify SYSLINUX (default extlinux) and SYSLINUX_PATH +# (default /boot/extlinux) +# # The entry in /boot/grub/menu.lst must be entered in manually. # The test will not modify that file. #REBOOT_TYPE = grub diff --git a/tools/virtio/virtio_test.c b/tools/virtio/virtio_test.c index e626fa553c5a..6d25dcd2e97a 100644 --- a/tools/virtio/virtio_test.c +++ b/tools/virtio/virtio_test.c @@ -232,7 +232,7 @@ const struct option longopts[] = { } }; -static void help() +static void help(void) { fprintf(stderr, "Usage: virtio_test [--help]" " [--no-indirect]" |