aboutsummaryrefslogtreecommitdiffstatshomepage
AgeCommit message (Collapse)AuthorFilesLines
2020-04-20arm64: dts: qcom: fix pm8150 gpio interruptsJonathan Marek3-36/+6
This was mistakenly copied from the downstream dts, however the upstream driver works differently. I only tested this with the pm8150_gpios node (used with volume button), but the 2 others should be the same. Fixes: e92b61c8e775 ("arm64: dts: qcom: pm8150l: Add base dts file") Fixes: 229d5bcad0d0 ("arm64: dts: qcom: pm8150b: Add base dts file") Fixes: 5101f22a5c37 ("arm64: dts: qcom: pm8150: Add base dts file") Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Jonathan Marek <jonathan@marek.ca> Link: https://lore.kernel.org/r/20200420153543.14512-1-jonathan@marek.ca Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-14arm64: dts: qcom: sc7180: Update QUSB2 V2 Phy params for SC7180 IDP deviceSandeep Maheswaram1-2/+4
Overriding the QUSB2 V2 Phy tuning parameters for SC7180 IDP device. Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1583747589-17267-10-git-send-email-sanm@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-14arm64: dts: qcom: sc7180: Add generic QUSB2 V2 Phy compatibleSandeep Maheswaram1-1/+1
Use generic QUSB2 V2 Phy configuration for SC7180. Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1583747589-17267-8-git-send-email-sanm@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-14arm64: dts: qcom: sdm845: Add generic QUSB2 V2 Phy compatibleSandeep Maheswaram1-2/+2
Use generic QUSB2 V2 Phy configuration for sdm845. Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1583747589-17267-9-git-send-email-sanm@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-13arm64: dts: qcom: sc7180: Add cpuidle low power statesMaulik Shah1-0/+78
Add device bindings for cpuidle states for cpu devices. Cc: devicetree@vger.kernel.orgi Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Reviewed-by: Srinivas Rao L <lsrao@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1586703004-13674-2-git-send-email-mkshah@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-13arm64: dts: ipq8074: qcom: Re-arrange dts nodes based on addressSivaprakash Murugesan2-294/+292
This patch re-arranges ipq8074 device nodes based on node address followed by node names followed by node labels. Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org> Link: https://lore.kernel.org/r/1586572830-22727-1-git-send-email-sivaprak@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-13arm64: dts: qcom: sc7180: Add interconnect paths for the video codecMatthias Kaehlcke1-0/+3
Add the interconnect path configuration for the venus video codec of the SC7180. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20200409160206.1.Icf877f5cd50ef5e56d14ee014ca196d76242cb89@changeid Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-13arm64: dts: qcom: sc7180: Changed polling mode in Thermal-zones nodeRajeshwari1-50/+50
Changed polling-delay and polling-delay-passive to zero to disable polling mode of the framework as interrupts for tsens are already configured. Signed-off-by: Rajeshwari <rkambl@codeaurora.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/1586244677-14399-1-git-send-email-rkambl@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-13arm64: dts: qcom: sc7180: Swap order of gpucc and sdhc_2Douglas Anderson1-14/+14
Devices are supposed to be sorted by unit address. These two got swapped when they landed. Fix. Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200331092832.1.Ic361058ca22d7439164ffea11421740462e14272@changeid Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-13arm64: dts: qcom: msm8998: remove unit name for thermal trip pointsAmit Kucheria1-19/+19
The thermal trip points have unit name but no reg property, so we can remove them. It also fixes the following warnings from 'make dtbs_check' after adding the thermal yaml bindings. arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones: cpu0-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones: cpu1-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones: cpu2-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones: cpu3-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones: cpu4-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones: cpu5-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones: cpu6-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones: cpu7-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones: clust0-mhm-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones: clust1-mhm-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones: cluster1-l2-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones: modem-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones: mem-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones: wlan-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones: q6-dsp-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones: camera-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones: multimedia-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones: cpu0-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones: cpu1-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones: cpu2-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones: cpu3-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones: cpu4-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones: cpu5-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones: cpu6-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones: cpu7-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones: clust0-mhm-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones: clust1-mhm-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones: cluster1-l2-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones: modem-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones: mem-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones: wlan-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones: q6-dsp-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones: camera-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones: multimedia-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Link: https://lore.kernel.org/r/cd6f0c7298437d35642b35c9ede9064c247d6090.1585562459.git.amit.kucheria@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-13arm64: dts: qcom: msm8996: remove unit name for thermal trip pointsAmit Kucheria1-14/+14
The thermal trip points have unit name but no reg property, so we can remove them. It also fixes the following warnings from 'make dtbs_check' after adding the thermal yaml bindings. arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones: cpu0-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones: cpu1-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones: cpu2-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones: cpu3-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones: m4m-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones: l3-or-venus-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones: cluster0-l2-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones: cluster1-l2-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones: camera-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones: q6-dsp-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones: mem-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones: modemtx-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones: cpu0-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones: cpu1-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones: cpu2-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones: cpu3-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones: m4m-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones: l3-or-venus-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones: cluster0-l2-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones: cluster1-l2-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones: camera-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones: q6-dsp-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones: mem-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones: modemtx-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Link: https://lore.kernel.org/r/2c0aa5357c96c3caff8554f9ef3ab9c5a2b8d2f8.1585562459.git.amit.kucheria@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-13arm64: dts: qcom: msm8916: remove unit name for thermal trip pointsAmit Kucheria1-4/+4
The thermal trip points have unit name but no reg property, so we can remove them. It also fixes the following warnings from 'make dtbs_check' after adding the thermal yaml bindings. arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml: thermal-zones: gpu-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml: thermal-zones: camera-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml: thermal-zones: modem-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml: thermal-zones: gpu-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml: thermal-zones: camera-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml: thermal-zones: modem-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+' Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Link: https://lore.kernel.org/r/2d3d045c18a2fb85b28cf304aa11ae6e6538d75e.1585562459.git.amit.kucheria@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-13arm64: dts: qcom: sc7180: modify assigned clocks for sc7180 targetKrishna Manikandan1-1/+5
Add DISP_CC_MDSS_ROT_CLK and DISP_CC_MDSS_AHB_CLK in the assigned clocks list as these are display specific clocks and needs to be initialized from the client side. Adding the default rate of 19.2 mhz for these clocks for sc7180 target. Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org> Link: https://lore.kernel.org/r/1584709864-5587-1-git-send-email-mkrishn@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-13arm64: dts: qcom: sc7180: Include interconnect definitionsEvan Green1-0/+1
Re-introduce the include of the sc7180 interconnect node name definitions. Though this was part of v5 of the interconnect provider series [1], it was dropped because the DT changes went through a different tree than the header. Re-add that now. Interconnect clients being introduced can reference this patch as a dependency, rather than racing each other to add the include. [1] https://patchwork.kernel.org/patch/11417989/ Signed-off-by: Evan Green <evgreen@chromium.org> Link: https://lore.kernel.org/r/20200310161502.1.Ia2884ed3c8826f52fbd5dcfa7a376a2fac4f31e6@changeid Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-13arm64: dts: qcom: sdm845-db845c: Add ov8856 & ov7251 camera nodesRobert Foss1-0/+178
Enable the ov8856 main camera and the ov7251 b/w tracking camera used on the Qualcomm RB3 kit. Currently the camera nodes have not yet been attached to an to a CSI2 endpoint, since no driver currently supports the ISP that the the SDM845/db845c ships with. Signed-off-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200324155843.10719-6-robert.foss@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-13arm64: dts: qcom: sdm845-db845c: Add pm_8998 gpio namesRobert Foss1-0/+28
Add pm_8998 GPIO trace names. These names are defined in the 96boards db845c mezzanine schematic. Signed-off-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200324155843.10719-5-robert.foss@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-13arm64: dts: qcom: sdm845: Add i2c-qcom-cci nodeRobert Foss2-0/+96
The sdm845 SOC ships with a CCI controller, which has two CCI/I2C buses. Signed-off-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200324155843.10719-4-robert.foss@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-13arm64: dts: qcom: apq8016-sbc: Add CCI/Sensor nodesLoic Poulain1-0/+76
Add cci device to msm8916.dtsi. Add default 96boards camera node for db410c (apq8016-sbc). Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200324155843.10719-3-robert.foss@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-13arm64: dts: qcom: msm8916: Add i2c-qcom-cci nodeLoic Poulain1-0/+27
The msm8916 CCI controller provides one CCI/I2C bus. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200324155843.10719-2-robert.foss@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-13arm64: dts: qcom: qcs404-evb: Enable USB controllersBryan O'Donoghue1-0/+35
This patch enables the primary and secondary USB controllers on the qcs404-evb. Primary: The primary USB controller has - One USB3 SS PHY using gpio-usb-conn - One USB2 HS PHY in device mode only and no connector driver associated. Secondary: The second DWC3 controller which has one USB Hi-Speed PHY attached to it. Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-msm@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20200311191517.8221-7-bryan.odonoghue@linaro.org [bjorn: Dropped usb3 role switching and enabled vbus] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-13arm64: dts: qcom: qcs404-evb: Raise vreg_l12_3p3 minimum voltageBryan O'Donoghue1-1/+1
Rather than set the minimum microvolt for this regulator in the USB SS PHY driver, set it in the DTS. Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Andy Gross <agross@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-msm@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20200311191517.8221-6-bryan.odonoghue@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-13arm64: dts: qcom: qcs404-evb: Describe external VBUS regulatorBryan O'Donoghue1-0/+12
VBUS is supplied by an external regulator controlled by a GPIO pin. This patch models the regulator as regulator-usb3-vbus. Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-msm@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20200311191517.8221-5-bryan.odonoghue@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-13arm64: dts: qcom: qcs404-evb: Define USB ID pinBryan O'Donoghue1-0/+14
The USB ID pin is used to tell if a system is a Host or a Device. For our purposes we will bind this pin into gpio-usb-conn later. For now define the pin with its pinmux. Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-msm@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20200311191517.8221-4-bryan.odonoghue@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-13arm64: dts: qcom: qcs404-evb: Define VBUS pinsBryan O'Donoghue1-0/+22
Defines VBUS detect and VBUS boost for the QCS404 EVB. Detect: VBUS present/absent is presented to the SoC via a GPIO on the EVB. Define the pin mapping for later use by gpio-usb-conn. Boost: An external regulator is used to trigger VBUS on/off via GPIO. This patch defines the relevant GPIO in the EVB dts. Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-msm@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20200311191517.8221-3-bryan.odonoghue@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-13arm64: dts: qcom: qcs404: Add USB devices and PHYsBjorn Andersson1-0/+100
QCS404 sports HS and SS USB controllers based on dwc3 block with two HS PHYs and one SS PHY. Add nodes for these devices and enable them for EVB board. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Andy Gross <agross@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-msm@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20200311191517.8221-2-bryan.odonoghue@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-13arm64: dts: qcom: sc7180: Fix cpu compatibleAmit Kucheria1-8/+8
"arm,armv8" compatible should only be used for software models. Replace it with the real cpu type. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Link: https://lore.kernel.org/r/2526d2b2907116d1bb6f7edd194226eb7e24c333.1584516925.git.amit.kucheria@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-13dt-bindings: arm: cpus: Add kryo468 compatibleAmit Kucheria1-0/+1
Kryo468 is found in sc7180, so add it to the list of cpu compatibles Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Link: https://lore.kernel.org/r/cd0f3d35ca0fc2944fd97e030a28318ff82dd5c1.1584516925.git.amit.kucheria@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-13arm64: dts: qcom: msm8916: Conform to the nodename pattern PSCI subnodesUlf Hansson1-5/+5
Subnodes for PSCI should start with "power-domain-", so let's adopt to this. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20200326103932.5809-3-ulf.hansson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-13arm64: dts: qcom: msm8916: Conform to the domain-idle-state bindingUlf Hansson1-0/+3
As the domain-idle-state DT binding got converted to the json-schema, a few minor changes were introduced. For example, the states needs to be specified within a separate node, named domain-idle-states. Let's conform to the updated binding. This also silence the below errors for msm8916 from of 'make dtbs_check': idle-states: cluster-retention:compatible:0: 'arm,idle-state' was expected idle-states: cluster-gdhs:compatible:0: 'arm,idle-state' was expected Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20200326103932.5809-2-ulf.hansson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-12Linux 5.7-rc1Linus Torvalds1-2/+2
2020-04-12MAINTAINERS: sort field names for all entriesLinus Torvalds1-1974/+1974
This sorts the actual field names too, potentially causing even more chaos and confusion at merge time if you have edited the MAINTAINERS file. But the end result is a more consistent layout, and hopefully it's a one-time pain minimized by doing this just before the -rc1 release. This was entirely scripted: ./scripts/parse-maintainers.pl --input=MAINTAINERS --output=MAINTAINERS --order Requested-by: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-12MAINTAINERS: sort entries by entry nameLinus Torvalds1-820/+820
They are all supposed to be sorted, but people who add new entries don't always know the alphabet. Plus sometimes the entry names get edited, and people don't then re-order the entry. Let's see how painful this will be for merging purposes (the MAINTAINERS file is often edited in various different trees), but Joe claims there's relatively few patches in -next that touch this, and doing it just before -rc1 is likely the best time. Fingers crossed. This was scripted with /scripts/parse-maintainers.pl --input=MAINTAINERS --output=MAINTAINERS but then I also ended up manually upper-casing a few entry names that stood out when looking at the end result. Requested-by: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-12Merge tag 'x86-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds4-9/+79
Pull x86 fixes from Thomas Gleixner: "A set of three patches to fix the fallout of the newly added split lock detection feature. It addressed the case where a KVM guest triggers a split lock #AC and KVM reinjects it into the guest which is not prepared to handle it. Add proper sanity checks which prevent the unconditional injection into the guest and handles the #AC on the host side in the same way as user space detections are handled. Depending on the detection mode it either warns and disables detection for the task or kills the task if the mode is set to fatal" * tag 'x86-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: KVM: VMX: Extend VMXs #AC interceptor to handle split lock #AC in guest KVM: x86: Emulate split-lock access as a write in emulator x86/split_lock: Provide handle_guest_split_lock()
2020-04-12Merge tag 'timers-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds3-0/+10
Pull time(keeping) updates from Thomas Gleixner: - Fix the time_for_children symlink in /proc/$PID/ so it properly reflects that it part of the 'time' namespace - Add the missing userns limit for the allowed number of time namespaces, which was half defined but the actual array member was not added. This went unnoticed as the array has an exessive empty member at the end but introduced a user visible regression as the output was corrupted. - Prevent further silent ucount corruption by adding a BUILD_BUG_ON() to catch half updated data. * tag 'timers-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ucount: Make sure ucounts in /proc/sys/user don't regress again time/namespace: Add max_time_namespaces ucount time/namespace: Fix time_for_children symlink
2020-04-12Merge tag 'sched-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds5-62/+51
Pull scheduler fixes/updates from Thomas Gleixner: - Deduplicate the average computations in the scheduler core and the fair class code. - Fix a raise between runtime distribution and assignement which can cause exceeding the quota by up to 70%. - Prevent negative results in the imbalanace calculation - Remove a stale warning in the workqueue code which can be triggered since the call site was moved out of preempt disabled code. It's a false positive. - Deduplicate the print macros for procfs - Add the ucmap values to the SCHED_DEBUG procfs output for completness * tag 'sched-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/debug: Add task uclamp values to SCHED_DEBUG procfs sched/debug: Factor out printing formats into common macros sched/debug: Remove redundant macro define sched/core: Remove unused rq::last_load_update_tick workqueue: Remove the warning in wq_worker_sleeping() sched/fair: Fix negative imbalance in imbalance calculation sched/fair: Fix race between runtime distribution and assignment sched/fair: Align rq->avg_idle and rq->avg_scan_cost
2020-04-12Merge tag 'perf-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds4-31/+573
Pull perf fixes from Thomas Gleixner: "Three fixes/updates for perf: - Fix the perf event cgroup tracking which tries to track the cgroup even for disabled events. - Add Ice Lake server support for uncore events - Disable pagefaults when retrieving the physical address in the sampling code" * tag 'perf-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Disable page faults when getting phys address perf/x86/intel/uncore: Add Ice Lake server uncore support perf/cgroup: Correct indirection in perf_less_group_idx() perf/core: Fix event cgroup tracking
2020-04-12Merge tag 'locking-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds3-26/+51
Pull locking fixes from Thomas Gleixner: "Three small fixes/updates for the locking core code: - Plug a task struct reference leak in the percpu rswem implementation. - Document the refcount interaction with PID_MAX_LIMIT - Improve the 'invalid wait context' data dump in lockdep so it contains all information which is required to decode the problem" * tag 'locking-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/lockdep: Improve 'invalid wait context' splat locking/refcount: Document interaction with PID_MAX_LIMIT locking/percpu-rwsem: Fix a task_struct refcount
2020-04-12Merge tag '5.7-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds12-238/+272
Pull cifs fixes from Steve French: "Ten cifs/smb fixes: - five RDMA (smbdirect) related fixes - add experimental support for swap over SMB3 mounts - also a fix which improves performance of signed connections" * tag '5.7-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: smb3: enable swap on SMB3 mounts smb3: change noisy error message to FYI smb3: smbdirect support can be configured by default cifs: smbd: Do not schedule work to send immediate packet on every receive cifs: smbd: Properly process errors on ib_post_send cifs: Allocate crypto structures on the fly for calculating signatures of incoming packets cifs: smbd: Update receive credits before sending and deal with credits roll back on failure before sending cifs: smbd: Check send queue size before posting a send cifs: smbd: Merge code to track pending packets cifs: ignore cached share root handle closing errors
2020-04-12Merge tag 'nfs-for-5.7-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds1-0/+1
Pull NFS client bugfix from Trond Myklebust: "Fix an RCU read lock leakage in pnfs_alloc_ds_commits_list()" * tag 'nfs-for-5.7-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: pNFS: Fix RCU lock leakage
2020-04-11Merge tag 'nios2-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2Linus Torvalds5-11/+13
Pull nios2 updates from Ley Foon Tan: - Remove nios2-dev@lists.rocketboards.org from MAINTAINERS - remove 'resetvalue' property - rename 'altr,gpio-bank-width' -> 'altr,ngpio' - enable the common clk subsystem on Nios2 * tag 'nios2-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2: MAINTAINERS: Remove nios2-dev@lists.rocketboards.org arch: nios2: remove 'resetvalue' property arch: nios2: rename 'altr,gpio-bank-width' -> 'altr,ngpio' arch: nios2: Enable the common clk subsystem on Nios2
2020-04-11Merge tag 'dma-mapping-5.7-1' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds2-4/+8
Pull dma-mapping fixes from Christoph Hellwig: - fix an integer truncation in dma_direct_get_required_mask (Kishon Vijay Abraham) - fix the display of dma mapping types (Grygorii Strashko) * tag 'dma-mapping-5.7-1' of git://git.infradead.org/users/hch/dma-mapping: dma-debug: fix displaying of dma allocation type dma-direct: fix data truncation in dma_direct_get_required_mask()
2020-04-11Merge tag 'kbuild-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds61-519/+384
Pull more Kbuild updates from Masahiro Yamada: - raise minimum supported binutils version to 2.23 - remove old CONFIG_AS_* macros that we know binutils >= 2.23 supports - move remaining CONFIG_AS_* tests to Kconfig from Makefile - enable -Wtautological-compare warnings to catch more issues - do not support GCC plugins for GCC <= 4.7 - fix various breakages of 'make xconfig' - include the linker version used for linking the kernel into LINUX_COMPILER, which is used for the banner, and also exposed to /proc/version - link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y, which allows us to remove the lib-ksyms.o workaround, and to solve the last known issue of the LLVM linker - add dummy tools in scripts/dummy-tools/ to enable all compiler tests in Kconfig, which will be useful for distro maintainers - support the single switch, LLVM=1 to use Clang and all LLVM utilities instead of GCC and Binutils. - support LLVM_IAS=1 to enable the integrated assembler, which is still experimental * tag 'kbuild-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (36 commits) kbuild: fix comment about missing include guard detection kbuild: support LLVM=1 to switch the default tools to Clang/LLVM kbuild: replace AS=clang with LLVM_IAS=1 kbuild: add dummy toolchains to enable all cc-option etc. in Kconfig kbuild: link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y MIPS: fw: arc: add __weak to prom_meminit and prom_free_prom_memory kbuild: remove -I$(srctree)/tools/include from scripts/Makefile kbuild: do not pass $(KBUILD_CFLAGS) to scripts/mkcompile_h Documentation/llvm: fix the name of llvm-size kbuild: mkcompile_h: Include $LD version in /proc/version kconfig: qconf: Fix a few alignment issues kconfig: qconf: remove some old bogus TODOs kconfig: qconf: fix support for the split view mode kconfig: qconf: fix the content of the main widget kconfig: qconf: Change title for the item window kconfig: qconf: clean deprecated warnings gcc-plugins: drop support for GCC <= 4.7 kbuild: Enable -Wtautological-compare x86: update AS_* macros to binutils >=2.23, supporting ADX and AVX2 crypto: x86 - clean up poly1305-x86_64-cryptogams.S by 'make clean' ...
2020-04-11mailmap: Add Sedat Dilek (replacement for expired email address)Sedat Dilek1-0/+1
I do not longer work for credativ Germany. Please, use my private email address instead. This is for the case when people want to CC me on patches sent from my old business email address. Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-11pNFS: Fix RCU lock leakageTrond Myklebust1-0/+1
Another brown paper bag moment. pnfs_alloc_ds_commits_list() is leaking the RCU lock. Fixes: a9901899b649 ("pNFS: Add infrastructure for cleaning up per-layout commit structures") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-04-11KVM: VMX: Extend VMXs #AC interceptor to handle split lock #AC in guestXiaoyao Li1-3/+34
Two types of #AC can be generated in Intel CPUs: 1. legacy alignment check #AC 2. split lock #AC Reflect #AC back into the guest if the guest has legacy alignment checks enabled or if split lock detection is disabled. If the #AC is not a legacy one and split lock detection is enabled, then invoke handle_guest_split_lock() which will either warn and disable split lock detection for this task or force SIGBUS on it. [ tglx: Switch it to handle_guest_split_lock() and rename the misnamed helper function. ] Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Link: https://lkml.kernel.org/r/20200410115517.176308876@linutronix.de
2020-04-11KVM: x86: Emulate split-lock access as a write in emulatorXiaoyao Li1-1/+11
Emulate split-lock accesses as writes if split lock detection is on to avoid #AC during emulation, which will result in a panic(). This should never occur for a well-behaved guest, but a malicious guest can manipulate the TLB to trigger emulation of a locked instruction[1]. More discussion can be found at [2][3]. [1] https://lkml.kernel.org/r/8c5b11c9-58df-38e7-a514-dc12d687b198@redhat.com [2] https://lkml.kernel.org/r/20200131200134.GD18946@linux.intel.com [3] https://lkml.kernel.org/r/20200227001117.GX9940@linux.intel.com Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Link: https://lkml.kernel.org/r/20200410115517.084300242@linutronix.de
2020-04-11x86/split_lock: Provide handle_guest_split_lock()Thomas Gleixner2-5/+34
Without at least minimal handling for split lock detection induced #AC, VMX will just run into the same problem as the VMWare hypervisor, which was reported by Kenneth. It will inject the #AC blindly into the guest whether the guest is prepared or not. Provide a function for guest mode which acts depending on the host SLD mode. If mode == sld_warn, treat it like user space, i.e. emit a warning, disable SLD and mark the task accordingly. Otherwise force SIGBUS. [ bp: Add a !CPU_SUP_INTEL stub for handle_guest_split_lock(). ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Link: https://lkml.kernel.org/r/20200410115516.978037132@linutronix.de Link: https://lkml.kernel.org/r/20200402123258.895628824@linutronix.de
2020-04-11kbuild: fix comment about missing include guard detectionMasahiro Yamada1-1/+1
The keyword here is 'twice' to explain the trick. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-04-10Merge branch 'akpm' (patches from Andrew)Linus Torvalds130-366/+706
Merge yet more updates from Andrew Morton: - Almost all of the rest of MM (memcg, slab-generic, slab, pagealloc, gup, hugetlb, pagemap, memremap) - Various other things (hfs, ocfs2, kmod, misc, seqfile) * akpm: (34 commits) ipc/util.c: sysvipc_find_ipc() should increase position index kernel/gcov/fs.c: gcov_seq_next() should increase position index fs/seq_file.c: seq_read(): add info message about buggy .next functions drivers/dma/tegra20-apb-dma.c: fix platform_get_irq.cocci warnings change email address for Pali Rohár selftests: kmod: test disabling module autoloading selftests: kmod: fix handling test numbers above 9 docs: admin-guide: document the kernel.modprobe sysctl fs/filesystems.c: downgrade user-reachable WARN_ONCE() to pr_warn_once() kmod: make request_module() return an error when autoloading is disabled mm/memremap: set caching mode for PCI P2PDMA memory to WC mm/memory_hotplug: add pgprot_t to mhp_params powerpc/mm: thread pgprot_t through create_section_mapping() x86/mm: introduce __set_memory_prot() x86/mm: thread pgprot_t through init_memory_mapping() mm/memory_hotplug: rename mhp_restrictions to mhp_params mm/memory_hotplug: drop the flags field from struct mhp_restrictions mm/special: create generic fallbacks for pte_special() and pte_mkspecial() mm/vma: introduce VM_ACCESS_FLAGS mm/vma: define a default value for VM_DATA_DEFAULT_FLAGS ...
2020-04-10Merge tag 'docs-5.7-2' of git://git.lwn.net/linuxLinus Torvalds6-24/+22
Pull Documentation fixes from Jonathan Corbet: "A handful of late-arriving fixes for the documentation tree" * tag 'docs-5.7-2' of git://git.lwn.net/linux: Documentation: android: binderfs: add 'stats' mount option Documentation: driver-api/usb/writing_usb_driver.rst Updates documentation links docs: driver-api: address duplicate label warning Documentation: sysrq: fix RST formatting docs: kernel-parameters.txt: Fix broken references docs: kernel-parameters.txt: Remove nompx docs: filesystems: fix typo in qnx6.rst
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.