| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Factor out jbd2_do_replay() no funtional change.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240930005942.626942-5-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
To make JBD2_COMMIT_BLOCK process more clean, no functional change.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20240930005942.626942-4-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Now buffer_head free is very fragmented in do_one_pass(), unified release
of buffer_head in do_one_pass()
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20240930005942.626942-3-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
'need_check_commit_time' is only used by v2/v3 checksum, so there isn't
need to add 'need_check_commit_time' judegement for v1 checksum logic.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20240930005942.626942-2-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Instead of directly casting and returning an error-valued pointer,
use ERR_CAST to make the error handling more explicit and improve
code clarity.
Signed-off-by: Yu Jiaoliang <yujiaoliang@vivo.com>
Link: https://patch.msgid.link/20240920021440.1959243-1-yujiaoliang@vivo.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
On some filesystems, it is currently possible to create a transient
data inconsistency between pagecache and on-disk state. For example,
on a 1k block size ext4 filesystem:
$ xfs_io -fc "pwrite 0 2k" -c "mmap 0 4k" -c "mwrite 2k 2k" \
-c "truncate 8k" -c "fiemap -v" -c "pread -v 2k 16" <file>
...
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..3]: 17410..17413 4 0x1
1: [4..15]: hole 12
00000800: 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58 XXXXXXXXXXXXXXXX
$ umount <mnt>; mount <dev> <mnt>
$ xfs_io -c "pread -v 2k 16" <file>
00000800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
This allocates and writes two 1k blocks, map writes to the post-eof
portion of the (4k) eof folio, extends the file, and then shows that
the post-eof data is not cleared before the file size is extended.
The result is pagecache with a clean and uptodate folio over a hole
that returns non-zero data. Once reclaimed, pagecache begins to
return valid data.
Some filesystems avoid this problem by flushing the EOF folio before
inode size extension. This triggers writeback time partial post-eof
zeroing. XFS explicitly zeroes newly exposed file ranges via
iomap_zero_range(), but this includes a hack to flush dirty but
hole-backed folios, which means writeback actually does the zeroing
in this particular case as well. bcachefs explicitly flushes the eof
folio on truncate extension to the same effect, but doesn't handle
the analogous write extension case (i.e., replace "truncate 8k" with
"pwrite 4k 4k" in the above example command to reproduce the same
problem on bcachefs). btrfs doesn't seem to support subpage block
sizes.
The two main options to avoid this behavior are to either flush or
do the appropriate zeroing during size extending operations. Zeroing
is only required when the size change exposes ranges of the file
that haven't been directly written, such as a write or truncate that
starts beyond the current eof. The pagecache_isize_extended() helper
is already used for this particular scenario. It currently cleans
any pte's for the eof folio to ensure preexisting mappings fault and
allow the filesystem to take action based on the updated inode size.
This is required to ensure the folio is fully backed by allocated
blocks, for example, but this also happens to be the same scenario
zeroing is required.
Update pagecache_isize_extended() to zero the post-eof range of the
eof folio if it is dirty at the time of the size change, since
writeback now won't have the chance. If non-dirty, the folio has
either not been written or the post-eof portion was zeroed by
writeback.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Link: https://patch.msgid.link/20240919160741.208162-3-bfoster@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Using mapped writes, it's technically possible to expose stale
post-eof data on a truncate up operation. Consider the following
example:
$ xfs_io -fc "pwrite 0 2k" -c "mmap 0 4k" -c "mwrite 2k 2k" \
-c "truncate 8k" -c "pread -v 2k 16" <file>
...
00000800: 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58 XXXXXXXXXXXXXXXX
...
This shows that the post-eof data written via mwrite lands within
EOF after a truncate up. While this is deliberate of the test case,
behavior is somewhat unpredictable because writeback does post-eof
zeroing, and writeback can occur at any time in the background. For
example, an fsync inserted between the mwrite and truncate causes
the subsequent read to instead return zeroes. This basically means
that there is a race window in this situation between any subsequent
extending operation and writeback that dictates whether post-eof
data is exposed to the file or zeroed.
To prevent this problem, perform partial block zeroing as part of
the various inode size extending operations that are susceptible to
it. For truncate extension, zero around the original eof similar to
how truncate down does partial zeroing of the new eof. For extension
via writes and fallocate related operations, zero the newly exposed
range of the file to cover any partial zeroing that must occur at
the original and new eof blocks.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Link: https://patch.msgid.link/20240919160741.208162-2-bfoster@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The commit 91562895f803 ("ext4: properly sync file size update after O_SYNC
direct IO") causes confusion about the meaning of the return value of
ext4_dio_write_end_io().
Specifically, when the ext4_handle_inode_extension() operation succeeds,
ext4_dio_write_end_io() directly returns count instead of 0.
This does not cause a bug in the current kernel, but the semantics of the
return value of the ext4_dio_write_end_io() function are wrong, which is
likely to introduce bugs in the future code evolution.
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20240919082539.381626-1-alexjlzheng@tencent.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Commit 449813515d3e ("block, fs: Restore the per-bio/request data
lifetime fields") restored write-hint support in ext4. But that is
applicable only for direct IO. This patch supports passing
write-hint for buffered IO from ext4 file system to block layer
by filling bi_write_hint of struct bio in io_submit_add_bh().
Signed-off-by: j.xia <j.xia@samsung.com>
Link: https://patch.msgid.link/20240919020341.2657646-1-j.xia@samsung.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
When I enabled ext4 debug for fault injection testing, I encountered the
following warning:
EXT4-fs error (device sda): ext4_read_inode_bitmap:201: comm fsstress:
Cannot read inode bitmap - block_group = 8, inode_bitmap = 1051
WARNING: CPU: 0 PID: 511 at fs/buffer.c:1181 mark_buffer_dirty+0x1b3/0x1d0
The root cause of the issue lies in the improper implementation of ext4's
buffer_head read fault injection. The actual completion of buffer_head
read and the buffer_head fault injection are not atomic, which can lead
to the uptodate flag being cleared on normally used buffer_heads in race
conditions.
[CPU0] [CPU1] [CPU2]
ext4_read_inode_bitmap
ext4_read_bh()
<bh read complete>
ext4_read_inode_bitmap
if (buffer_uptodate(bh))
return bh
jbd2_journal_commit_transaction
__jbd2_journal_refile_buffer
__jbd2_journal_unfile_buffer
__jbd2_journal_temp_unlink_buffer
ext4_simulate_fail_bh()
clear_buffer_uptodate
mark_buffer_dirty
<report warning>
WARN_ON_ONCE(!buffer_uptodate(bh))
The best approach would be to perform fault injection in the IO completion
callback function, rather than after IO completion. However, the IO
completion callback function cannot get the fault injection code in sb.
Fix it by passing the result of fault injection into the bh read function,
we simulate faults within the bh read function itself. This requires adding
an extra parameter to the bh read functions that need fault injection.
Fixes: 46f870d690fe ("ext4: simulate various I/O and checksum errors when reading metadata")
Signed-off-by: Long Li <leo.lilong@huawei.com>
Link: https://patch.msgid.link/20240906091746.510163-1-leo.lilong@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
When converting a delalloc extent in ext4_es_insert_extent(), since we
only want to pass the info of whether the quota has already been claimed
if the allocation is a direct allocation from ext4_map_create_blocks(),
there is no need to pass full mapping flags, so changes to just pass
whether the EXT4_GET_BLOCKS_DELALLOC_RESERVE bit is set.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240906061401.2980330-1-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
When ctx_set_flags() is unused, it prevents kernel builds
with clang, `make W=1` and CONFIG_WERROR=y:
.../ext4/super.c:2120:1: error: unused function 'ctx_set_flags' [-Werror,-Wunused-function]
2120 | EXT4_SET_CTX(flags); /* set only */
| ^~~~~~~~~~~~~~~~~~~
Fix this by marking ctx_*_flags() with __maybe_unused
(mark both for the sake of symmetry).
See also commit 6863f5643dd7 ("kbuild: allow Clang to find unused static
inline functions for W=1 build").
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240905163229.140522-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This is the logic behavior and one that we would like to verify
using a generic fstest similar to xfs/546.
Link: https://lore.kernel.org/fstests/20240830152648.GE6216@frogsfrogsfrogs/
Suggested-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240904084657.1062243-1-amir73il@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
cma_alloc() keep failed in our system which thanks to a jh->bh->b_page
can not be migrated out of CMA area[1] as the jh has one cp_transaction
pending on it because of j_free > j_max_transaction_buffers[2][3][4][5][6].
We temporarily solve this by launching jbd2_log_do_checkpoint forcefully
somewhere. Since journal is common mechanism to all JFSs and
cp_transaction has a little fewer opportunity to be launched, the
cma_alloc() could be affected under the same scenario. This patch
would like to have buffer_head of ext4 not use CMA pages when doing
sb_getblk.
[1]
crash_arm64_v8.0.4++> kmem -p|grep ffffff808f0aa150(sb->s_bdev->bd_inode->i_mapping)
fffffffe01a51c00 e9470000 ffffff808f0aa150 3 2 8000000008020 lru,private
fffffffe03d189c0 174627000 ffffff808f0aa150 4 2 2004000000008020 lru,private
fffffffe03d88e00 176238000 ffffff808f0aa150 3f9 2 2008000000008020 lru,private
fffffffe03d88e40 176239000 ffffff808f0aa150 6 2 2008000000008020 lru,private
fffffffe03d88e80 17623a000 ffffff808f0aa150 5 2 2008000000008020 lru,private
fffffffe03d88ec0 17623b000 ffffff808f0aa150 1 2 2008000000008020 lru,private
fffffffe03d88f00 17623c000 ffffff808f0aa150 0 2 2008000000008020 lru,private
fffffffe040e6540 183995000 ffffff808f0aa150 3f4 2 2004000000008020 lru,private
[2] page -> buffer_head
crash_arm64_v8.0.4++> struct page.private fffffffe01a51c00 -x
private = 0xffffff802fca0c00
[3] buffer_head -> journal_head
crash_arm64_v8.0.4++> struct buffer_head.b_private 0xffffff802fca0c00
b_private = 0xffffff8041338e10,
[4] journal_head -> b_cp_transaction
crash_arm64_v8.0.4++> struct journal_head.b_cp_transaction 0xffffff8041338e10 -x
b_cp_transaction = 0xffffff80410f1900,
[5] transaction_t -> journal
crash_arm64_v8.0.4++> struct transaction_t.t_journal 0xffffff80410f1900 -x
t_journal = 0xffffff80e70f3000,
[6] j_free & j_max_transaction_buffers
crash_arm64_v8.0.4++> struct journal_t.j_free,j_max_transaction_buffers 0xffffff80e70f3000 -x
j_free = 0x3f1,
j_max_transaction_buffers = 0x100,
Suggested-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240904075300.1148836-1-zhaoyang.huang@unisoc.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The if condition !A || A && B can be simplified to !A || B.
./fs/ext4/fast_commit.c:362:21-23: WARNING !A || A && B is equivalent to !A || B.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9837
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240830071713.40565-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The original implementation ext4's FS_IOC_GETFSMAP handling only
worked when the range of queried blocks included at least one free
(unallocated) block range. This is because how the metadata blocks
were emitted was as a side effect of ext4_mballoc_query_range()
calling ext4_getfsmap_datadev_helper(), and that function was only
called when a free block range was identified. As a result, this
caused generic/365 to fail.
Fix this by creating a new function ext4_getfsmap_meta_helper() which
gets called so that blocks before the first free block range in a
block group can get properly reported.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
|
|
The maximum length of a filename is 255 and the minimum block size is 1024,
so it is always guaranteed that the number of entries is greater than or
equal to 2 when do_split() is called. So unless ext4_dx_add_entry() and
make_indexed_dir() or some other functions are buggy, 'split == 0' will
not occur.
Setting 'continued' to 0 in this case masks the problem that the file
system has become corrupted, even though it prevents possible out-of-bounds
access. Hence WARN_ON_ONCE() is used to check if 'split' is 0, and if it is
then warns and returns an error to abort split.
Suggested-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20240823160518.GA424729@mit.edu
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20241008121152.3771906-1-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
After commit 21175ca434c5 ("ext4: make prefetch_block_bitmaps default"),
we enable 'prefetch_block_bitmaps' by default, but this is not shown in
the '/proc/fs/ext4/sdx/options' procfs interface.
This makes it impossible to distinguish whether the feature is enabled by
default or not, so 'prefetch_block_bitmaps' is shown in the 'options'
procfs interface when prefetch_block_bitmaps is enabled by default.
This makes it easy to notice changes to the default mount options between
versions through the '/proc/fs/ext4/sdx/options' procfs interface.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20241008120134.3758097-1-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
When we remount filesystem with 'abort' mount option while changing
other mount options as well (as is LTP test doing), we can return error
from the system call after commit d3476f3dad4a ("ext4: don't set
SB_RDONLY after filesystem errors") because the application of mount
option changes detects shutdown filesystem and refuses to do anything.
The behavior of application of other mount options in presence of
'abort' mount option is currently rather arbitary as some mount option
changes are handled before 'abort' and some after it.
Move aborting of the filesystem to the end of remount handling so all
requested changes are properly applied before the filesystem is shutdown
to have a reasonably consistent behavior.
Fixes: d3476f3dad4a ("ext4: don't set SB_RDONLY after filesystem errors")
Reported-by: Jan Stancek <jstancek@redhat.com>
Link: https://lore.kernel.org/all/Zvp6L+oFnfASaoHl@t14s
Signed-off-by: Jan Kara <jack@suse.cz>
Tested-by: Jan Stancek <jstancek@redhat.com>
Link: https://patch.msgid.link/20241004221556.19222-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
find_group_other() and find_group_orlov() read *_lo, *_hi with
ext4_free_inodes_count without additional locking. This can cause
data-race warning, but since the lock is held for most writes and free
inodes value is generally not a problem even if it is incorrect, it is
more appropriate to use READ_ONCE()/WRITE_ONCE() than to add locking.
==================================================================
BUG: KCSAN: data-race in ext4_free_inodes_count / ext4_free_inodes_set
write to 0xffff88810404300e of 2 bytes by task 6254 on cpu 1:
ext4_free_inodes_set+0x1f/0x80 fs/ext4/super.c:405
__ext4_new_inode+0x15ca/0x2200 fs/ext4/ialloc.c:1216
ext4_symlink+0x242/0x5a0 fs/ext4/namei.c:3391
vfs_symlink+0xca/0x1d0 fs/namei.c:4615
do_symlinkat+0xe3/0x340 fs/namei.c:4641
__do_sys_symlinkat fs/namei.c:4657 [inline]
__se_sys_symlinkat fs/namei.c:4654 [inline]
__x64_sys_symlinkat+0x5e/0x70 fs/namei.c:4654
x64_sys_call+0x1dda/0x2d60 arch/x86/include/generated/asm/syscalls_64.h:267
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x54/0x120 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x76/0x7e
read to 0xffff88810404300e of 2 bytes by task 6257 on cpu 0:
ext4_free_inodes_count+0x1c/0x80 fs/ext4/super.c:349
find_group_other fs/ext4/ialloc.c:594 [inline]
__ext4_new_inode+0x6ec/0x2200 fs/ext4/ialloc.c:1017
ext4_symlink+0x242/0x5a0 fs/ext4/namei.c:3391
vfs_symlink+0xca/0x1d0 fs/namei.c:4615
do_symlinkat+0xe3/0x340 fs/namei.c:4641
__do_sys_symlinkat fs/namei.c:4657 [inline]
__se_sys_symlinkat fs/namei.c:4654 [inline]
__x64_sys_symlinkat+0x5e/0x70 fs/namei.c:4654
x64_sys_call+0x1dda/0x2d60 arch/x86/include/generated/asm/syscalls_64.h:267
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x54/0x120 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Cc: stable@vger.kernel.org
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://patch.msgid.link/20241003125337.47283-1-aha310510@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
An ext4_journal_stop(handle) call was immediately used after a return value
check for a ext4_orphan_add() call in this function implementation.
Thus call such a function only once instead directly before the check.
This issue was transformed by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/cf895072-43cf-412c-bced-8268498ad13e@web.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
|
|
Pull bluetooth fixes from Luiz Augusto Von Dentz:
- ISO: Fix multiple init when debugfs is disabled
- Call iso_exit() on module unload
- Remove debugfs directory on module init failure
- btusb: Fix not being able to reconnect after suspend
- btusb: Fix regression with fake CSR controllers 0a12:0001
- bnep: fix wild-memory-access in proto_unregister
Note: normally the bluetooth fixes go through the networking tree, but
this missed the weekly merge, and two of the commits fix regressions
that have caused a fair amount of noise and have now hit stable too:
https://lore.kernel.org/all/4e1977ca-6166-4891-965e-34a6f319035f@leemhuis.info/
So I'm pulling it directly just to expedite things and not miss yet
another -rc release. This is not meant to become a new pattern.
* tag 'for-net-2024-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: btusb: Fix regression with fake CSR controllers 0a12:0001
Bluetooth: bnep: fix wild-memory-access in proto_unregister
Bluetooth: btusb: Fix not being able to reconnect after suspend
Bluetooth: Remove debugfs directory on module init failure
Bluetooth: Call iso_exit() on module unload
Bluetooth: ISO: Fix multiple init when debugfs is disabled
|
|
Pull pin control fixes from Linus Walleij:
"Mostly error path fixes, but one pretty serious interrupt problem in
the Ocelot driver as well:
- Fix two error paths and a missing semicolon in the Intel driver
- Add a missing ACPI ID for the Intel Panther Lake
- Check return value of devm_kasprintf() in the Apple and STM32
drivers
- Add a missing mutex_destroy() in the aw9523 driver
- Fix a double free in cv1800_pctrl_dt_node_to_map() in the Sophgo
driver
- Fix a double free in ma35_pinctrl_dt_node_to_map_func() in the
Nuvoton driver
- Fix a bug in the Ocelot interrupt handler making the system hang"
* tag 'pinctrl-v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: ocelot: fix system hang on level based interrupts
pinctrl: nuvoton: fix a double free in ma35_pinctrl_dt_node_to_map_func()
pinctrl: sophgo: fix double free in cv1800_pctrl_dt_node_to_map()
pinctrl: intel: platform: Add Panther Lake to the list of supported
pinctrl: aw9523: add missing mutex_destroy
pinctrl: stm32: check devm_kasprintf() returned value
pinctrl: apple: check devm_kasprintf() returned value
pinctrl: intel: platform: use semicolon instead of comma in ncommunities assignment
pinctrl: intel: platform: fix error path in device_for_each_child_node()
|
|
Pull misc driver fixes from Greg KH:
"Here are a number of small char/misc/iio driver fixes for 6.12-rc4:
- loads of small iio driver fixes for reported problems
- parport driver out-of-bounds fix
- Kconfig description and MAINTAINERS file updates
All of these, except for the Kconfig and MAINTAINERS file updates have
been in linux-next all week. Those other two are just documentation
changes and will have no runtime issues and were merged on Friday"
* tag 'char-misc-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (39 commits)
misc: rtsx: list supported models in Kconfig help
MAINTAINERS: Remove some entries due to various compliance requirements.
misc: microchip: pci1xxxx: add support for NVMEM_DEVID_AUTO for OTP device
misc: microchip: pci1xxxx: add support for NVMEM_DEVID_AUTO for EEPROM device
parport: Proper fix for array out-of-bounds access
iio: frequency: admv4420: fix missing select REMAP_SPI in Kconfig
iio: frequency: {admv4420,adrf6780}: format Kconfig entries
iio: adc: ad4695: Add missing Kconfig select
iio: adc: ti-ads8688: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
iio: hid-sensors: Fix an error handling path in _hid_sensor_set_report_latency()
iioc: dac: ltc2664: Fix span variable usage in ltc2664_channel_config()
iio: dac: stm32-dac-core: add missing select REGMAP_MMIO in Kconfig
iio: dac: ltc1660: add missing select REGMAP_SPI in Kconfig
iio: dac: ad5770r: add missing select REGMAP_SPI in Kconfig
iio: amplifiers: ada4250: add missing select REGMAP_SPI in Kconfig
iio: frequency: adf4377: add missing select REMAP_SPI in Kconfig
iio: resolver: ad2s1210: add missing select (TRIGGERED_)BUFFER in Kconfig
iio: resolver: ad2s1210 add missing select REGMAP in Kconfig
iio: proximity: mb1232: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
iio: pressure: bm1390: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
...
|
|
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.12-rc4:
- qcom-geni serial driver fixes, wow what a mess of a UART chip that
thing is...
- vt infoleak fix for odd font sizes
- imx serial driver bugfix
- yet-another n_gsm ldisc bugfix, slowly chipping down the issues in
that piece of code
All of these have been in linux-next for over a week with no reported
issues"
* tag 'tty-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: qcom-geni: rename suspend functions
serial: qcom-geni: drop unused receive parameter
serial: qcom-geni: drop flip buffer WARN()
serial: qcom-geni: fix rx cancel dma status bit
serial: qcom-geni: fix receiver enable
serial: qcom-geni: fix dma rx cancellation
serial: qcom-geni: fix shutdown race
serial: qcom-geni: revert broken hibernation support
serial: qcom-geni: fix polled console initialisation
serial: imx: Update mctrl old_status on RTSD interrupt
tty: n_gsm: Fix use-after-free in gsm_cleanup_mux
vt: prevent kernel-infoleak in con_font_get()
|
|
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 6.12-rc4:
- xhci driver fixes for a number of reported issues
- new usb-serial driver ids
- dwc3 driver fixes for reported problems.
- usb gadget driver fixes for reported problems
- typec driver fixes
- MAINTAINER file updates
All of these have been in linux-next this week with no reported issues"
* tag 'usb-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add Telit FN920C04 MBIM compositions
USB: serial: option: add support for Quectel EG916Q-GL
xhci: dbc: honor usb transfer size boundaries.
usb: xhci: Fix handling errors mid TD followed by other errors
xhci: Mitigate failed set dequeue pointer commands
xhci: Fix incorrect stream context type macro
USB: gadget: dummy-hcd: Fix "task hung" problem
usb: gadget: f_uac2: fix return value for UAC2_ATTRIBUTE_STRING store
usb: dwc3: core: Fix system suspend on TI AM62 platforms
xhci: tegra: fix checked USB2 port number
usb: dwc3: Wait for EndXfer completion before restoring GUSB2PHYCFG
usb: typec: qcom-pmic-typec: fix sink status being overwritten with RP_DEF
usb: typec: altmode should keep reference to parent
MAINTAINERS: usb: raw-gadget: add bug tracker link
MAINTAINERS: Add an entry for the LJCA drivers
|
|
Pull x86 fixes from Borislav Petkov:
- Explicitly disable the TSC deadline timer when going idle to address
some CPU errata in that area
- Do not apply the Zenbleed fix on anything else except AMD Zen2 on the
late microcode loading path
- Clear CPU buffers later in the NMI exit path on 32-bit to avoid
register clearing while they still contain sensitive data, for the
RDFS mitigation
- Do not clobber EFLAGS.ZF with VERW on the opportunistic SYSRET exit
path on 32-bit
- Fix parsing issues of memory bandwidth specification in sysfs for
resctrl's memory bandwidth allocation feature
- Other small cleanups and improvements
* tag 'x86_urgent_for_v6.12_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Always explicitly disarm TSC-deadline timer
x86/CPU/AMD: Only apply Zenbleed fix for Zen2 during late microcode load
x86/bugs: Use code segment selector for VERW operand
x86/entry_32: Clear CPU buffers after register restore in NMI return
x86/entry_32: Do not clobber user EFLAGS.ZF
x86/resctrl: Annotate get_mem_config() functions as __init
x86/resctrl: Avoid overflow in MB settings in bw_validate()
x86/amd_nb: Add new PCI ID for AMD family 1Ah model 20h
|
|
Pull irq fixes from Borislav Petkov:
- Fix a case for sifive-plic where an interrupt gets disabled *and*
masked and remains masked when it gets reenabled later
- Plug a small race in GIC-v4 where userspace can force an affinity
change of a virtual CPU (vPE) in its unmapping path
- Do not mix the two sets of ocelot irqchip's registers in the mask
calculation of the main interrupt sticky register
- Other smaller fixlets and cleanups
* tag 'irq_urgent_for_v6.12_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/renesas-rzg2l: Fix missing put_device
irqchip/riscv-intc: Fix SMP=n boot with ACPI
irqchip/sifive-plic: Unmask interrupt in plic_irq_enable()
irqchip/gic-v4: Don't allow a VMOVP on a dying VPE
irqchip/sifive-plic: Return error code on failure
irqchip/riscv-imsic: Fix output text of base address
irqchip/ocelot: Comment sticky register clearing code
irqchip/ocelot: Fix trigger register address
irqchip: Remove obsolete config ARM_GIC_V3_ITS_PCI
|
|
Pull scheduling fixes from Borislav Petkov:
- Add PREEMPT_RT maintainers
- Fix another aspect of delayed dequeued tasks wrt determining their
state, i.e., whether they're runnable or blocked
- Handle delayed dequeued tasks and their migration wrt PSI properly
- Fix the situation where a delayed dequeue task gets enqueued into a
new class, which should not happen
- Fix a case where memory allocation would happen while the runqueue
lock is held, which is a no-no
- Do not over-schedule when tasks with shorter slices preempt the
currently running task
- Make sure delayed to deque entities are properly handled before
unthrottling
- Other smaller cleanups and improvements
* tag 'sched_urgent_for_v6.12_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Add an entry for PREEMPT_RT.
sched/fair: Fix external p->on_rq users
sched/psi: Fix mistaken CPU pressure indication after corrupted task state bug
sched/core: Dequeue PSI signals for blocked tasks that are delayed
sched: Fix delayed_dequeue vs switched_from_fair()
sched/core: Disable page allocation in task_tick_mm_cid()
sched/deadline: Use hrtick_enabled_dl() before start_hrtick_dl()
sched/eevdf: Fix wakeup-preempt by checking cfs_rq->nr_running
sched: Fix sched_delayed vs cfs_bandwidth
|
|
Pull xen fix from Juergen Gross:
"A single fix for a build failure introduced this merge window"
* tag 'for-linus-6.12a-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: Remove dependency between pciback and privcmd
|
|
Pull dma-mapping fix from Christoph Hellwig:
"Just another small tracing fix from Sean"
* tag 'dma-mapping-6.12-2024-10-20' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: fix tracing dma_alloc/free with vmalloc'd memory
|
|
Pull one more io_uring fix from Jens Axboe:
"Fix for a regression introduced in 6.12-rc2, where a condition check
was negated and hence -EAGAIN would bubble back up up to userspace
rather than trigger a retry condition"
* tag 'io_uring-6.12-20241019' of git://git.kernel.dk/linux:
io_uring/rw: fix wrong NOWAIT check in io_rw_init_file()
|
|
Pull SCSI fixes from James Bottomley:
"Fixes all in drivers. The largest is the mpi3mr which corrects a phy
count limit that should only apply to the controller but was being
incorrectly applied to expander phys"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: core: Fix null-ptr-deref in target_alloc_device()
scsi: mpi3mr: Validate SAS port assignments
scsi: ufs: core: Set SDEV_OFFLINE when UFS is shut down
scsi: ufs: core: Requeue aborted request
scsi: ufs: core: Fix the issue of ICU failure
|
|
Pull ftrace fixes from Steven Rostedt:
"A couple of fixes to function graph infrastructure:
- Fix allocation of idle shadow stack allocation during hotplug
If function graph tracing is started when a CPU is offline, if it
were come online during the trace then the idle task that
represents the CPU will not get a shadow stack allocated for it.
This means all function graph hooks that happen while that idle
task is running (including in interrupt mode) will have all its
events dropped.
Switch over to the CPU hotplug mechanism that will have any newly
brought on line CPU get a callback that can allocate the shadow
stack for its idle task.
- Fix allocation size of the ret_stack_list array
When function graph tracing converted over to allowing more than
one user at a time, it had to convert its shadow stack from an
array of ret_stack structures to an array of unsigned longs. The
shadow stacks are allocated in batches of 32 at a time and assigned
to every running task. The batch is held by the ret_stack_list
array.
But when the conversion happened, instead of allocating an array of
32 pointers, it was allocated as a ret_stack itself (PAGE_SIZE).
This ret_stack_list gets passed to a function that iterates over
what it believes is its size defined by the
FTRACE_RETSTACK_ALLOC_SIZE macro (which is 32).
Luckily (PAGE_SIZE) is greater than 32 * sizeof(long), otherwise
this would have been an array overflow. This still should be fixed
and the ret_stack_list should be allocated to the size it is
expected to be as someday it may end up being bigger than
SHADOW_STACK_SIZE"
* tag 'ftrace-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
fgraph: Allocate ret_stack_list with proper size
fgraph: Use CPU hotplug mechanism to initialize idle shadow stacks
|
|
Pull ipe fixes from Fan Wu:
"This addresses several issues identified by Luca when attempting to
enable IPE on Debian and systemd:
- address issues with IPE policy update errors and policy update
version check, improving the clarity of error messages for better
understanding by userspace programs.
- enable IPE policies to be signed by secondary and platform
keyrings, facilitating broader use across general Linux
distributions like Debian.
- updates the IPE entry in the MAINTAINERS file to reflect the new
tree URL and my updated email from kernel.org"
* tag 'ipe-pr-20241018' of git://git.kernel.org/pub/scm/linux/kernel/git/wufan/ipe:
MAINTAINERS: update IPE tree url and Fan Wu's email
ipe: fallback to platform keyring also if key in trusted keyring is rejected
ipe: allow secondary and platform keyrings to install/update policies
ipe: also reject policy updates with the same version
ipe: return -ESTALE instead of -EINVAL on update when new policy has a lower version
|
|
Pull input fixes from Dmitry Torokhov:
- a fix for Zinitix driver to not fail probing if the property enabling
touch keys functionality is not defined. Support for touch keys was
added in 6.12 merge window so this issue does not affect users of
released kernels
- a couple new vendor/device IDs in xpad driver to enable support for
more hardware
* tag 'input-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: zinitix - don't fail if linux,keycodes prop is absent
Input: xpad - add support for MSI Claw A1M
Input: xpad - add support for 8BitDo Ultimate 2C Wireless Controller
|
|
Pull 9p fixes from Dominique Martinet:
"Mashed-up update that I sat on too long:
- fix for multiple slabs created with the same name
- enable multipage folios
- theorical fix to also look for opened fids by inode if none was
found by dentry"
[ Enabling multi-page folios should have been done during the merge
window, but it's a one-liner, and the actual meat of the enablement
is in netfs and already in use for other filesystems... - Linus ]
* tag '9p-for-6.12-rc4' of https://github.com/martinetd/linux:
9p: Avoid creating multiple slab caches with the same name
9p: Enable multipage folios
9p: v9fs_fid_find: also lookup by inode if not found dentry
|
|
Pull rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Fix several issues with the 'rustc-option' macro. It includes a
refactor from Masahiro of three '{cc,rust}-*' macros, which is not
a fix but avoids repeating the same commands (which would be
several lines in the case of 'rustc-option').
- Fix conditions for 'CONFIG_HAVE_CFI_ICALL_NORMALIZE_INTEGERS'. It
includes the addition of 'CONFIG_RUSTC_LLVM_VERSION', which is not
a fix but is needed for the actual fix.
And a trivial grammar fix"
* tag 'rust-fixes-6.12-2' of https://github.com/Rust-for-Linux/linux:
cfi: fix conditions for HAVE_CFI_ICALL_NORMALIZE_INTEGERS
kbuild: rust: add `CONFIG_RUSTC_LLVM_VERSION`
kbuild: fix issues with rustc-option
kbuild: refactor cc-option-yn, cc-disable-warning, rust-option-yn macros
lib/Kconfig.debug: fix grammar in RUST_BUILD_ASSERT_ALLOW
|
|
A previous commit improved how !FMODE_NOWAIT is dealt with, but
inadvertently negated a check whilst doing so. This caused -EAGAIN to be
returned from reading files with O_NONBLOCK set. Fix up the check for
REQ_F_SUPPORT_NOWAIT.
Reported-by: Julian Orth <ju.orth@gmail.com>
Link: https://github.com/axboe/liburing/issues/1270
Fixes: f7c913438533 ("io_uring/rw: allow pollable non-blocking attempts for !FMODE_NOWAIT")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The ret_stack_list is an array of ret_stack shadow stacks for the function
graph usage. When the first function graph is enabled, all tasks in the
system get a shadow stack. The ret_stack_list is a 32 element array of
pointers to these shadow stacks. It allocates the shadow stack in batches
(32 stacks at a time), assigns them to running tasks, and continues until
all tasks are covered.
When the function graph shadow stack changed from an array of
ftrace_ret_stack structures to an array of longs, the allocation of
ret_stack_list went from allocating an array of 32 elements to just a
block defined by SHADOW_STACK_SIZE. Luckily, that's defined as PAGE_SIZE
and is much more than enough to hold 32 pointers. But it is way overkill
for the amount needed to allocate.
Change the allocation of ret_stack_list back to a kcalloc() of
FTRACE_RETSTACK_ALLOC_SIZE pointers.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20241018215212.23f13f40@rorschach
Fixes: 42675b723b484 ("function_graph: Convert ret_stack to a series of longs")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The function graph infrastructure allocates a shadow stack for every task
when enabled. This includes the idle tasks. The first time the function
graph is invoked, the shadow stacks are created and never freed until the
task exits. This includes the idle tasks.
Only the idle tasks that were for online CPUs had their shadow stacks
created when function graph tracing started. If function graph tracing is
enabled and a CPU comes online, the idle task representing that CPU will
not have its shadow stack created, and all function graph tracing for that
idle task will be silently dropped.
Instead, use the CPU hotplug mechanism to allocate the idle shadow stacks.
This will include idle tasks for CPUs that come online during tracing.
This issue can be reproduced by:
# cd /sys/kernel/tracing
# echo 0 > /sys/devices/system/cpu/cpu1/online
# echo 0 > set_ftrace_pid
# echo function_graph > current_tracer
# echo 1 > options/funcgraph-proc
# echo 1 > /sys/devices/system/cpu/cpu1
# grep '<idle>' per_cpu/cpu1/trace | head
Before, nothing would show up.
After:
1) <idle>-0 | 0.811 us | __enqueue_entity();
1) <idle>-0 | 5.626 us | } /* enqueue_entity */
1) <idle>-0 | | dl_server_update_idle_time() {
1) <idle>-0 | | dl_scaled_delta_exec() {
1) <idle>-0 | 0.450 us | arch_scale_cpu_capacity();
1) <idle>-0 | 1.242 us | }
1) <idle>-0 | 1.908 us | }
1) <idle>-0 | | dl_server_start() {
1) <idle>-0 | | enqueue_dl_entity() {
1) <idle>-0 | | task_contending() {
Note, if tracing stops and restarts, the old way would then initialize
the onlined CPUs.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/20241018214300.6df82178@rorschach
Fixes: 868baf07b1a25 ("ftrace: Fix memory leak with function graph and cpu hotplug")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Pull bpf fixes from Daniel Borkmann:
- Fix BPF verifier to not affect subreg_def marks in its range
propagation (Eduard Zingerman)
- Fix a truncation bug in the BPF verifier's handling of
coerce_reg_to_size_sx (Dimitar Kanaliev)
- Fix the BPF verifier's delta propagation between linked registers
under 32-bit addition (Daniel Borkmann)
- Fix a NULL pointer dereference in BPF devmap due to missing rxq
information (Florian Kauer)
- Fix a memory leak in bpf_core_apply (Jiri Olsa)
- Fix an UBSAN-reported array-index-out-of-bounds in BTF parsing for
arrays of nested structs (Hou Tao)
- Fix build ID fetching where memory areas backing the file were
created with memfd_secret (Andrii Nakryiko)
- Fix BPF task iterator tid filtering which was incorrectly using pid
instead of tid (Jordan Rome)
- Several fixes for BPF sockmap and BPF sockhash redirection in
combination with vsocks (Michal Luczaj)
- Fix riscv BPF JIT and make BPF_CMPXCHG fully ordered (Andrea Parri)
- Fix riscv BPF JIT under CONFIG_CFI_CLANG to prevent the possibility
of an infinite BPF tailcall (Pu Lehui)
- Fix a build warning from resolve_btfids that bpf_lsm_key_free cannot
be resolved (Thomas Weißschuh)
- Fix a bug in kfunc BTF caching for modules where the wrong BTF object
was returned (Toke Høiland-Jørgensen)
- Fix a BPF selftest compilation error in cgroup-related tests with
musl libc (Tony Ambardar)
- Several fixes to BPF link info dumps to fill missing fields (Tyrone
Wu)
- Add BPF selftests for kfuncs from multiple modules, checking that the
correct kfuncs are called (Simon Sundberg)
- Ensure that internal and user-facing bpf_redirect flags don't overlap
(Toke Høiland-Jørgensen)
- Switch to use kvzmalloc to allocate BPF verifier environment (Rik van
Riel)
- Use raw_spinlock_t in BPF ringbuf to fix a sleep in atomic splat
under RT (Wander Lairson Costa)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (38 commits)
lib/buildid: Handle memfd_secret() files in build_id_parse()
selftests/bpf: Add test case for delta propagation
bpf: Fix print_reg_state's constant scalar dump
bpf: Fix incorrect delta propagation between linked registers
bpf: Properly test iter/task tid filtering
bpf: Fix iter/task tid filtering
riscv, bpf: Make BPF_CMPXCHG fully ordered
bpf, vsock: Drop static vsock_bpf_prot initialization
vsock: Update msg_count on read_skb()
vsock: Update rx_bytes on read_skb()
bpf, sockmap: SK_DROP on attempted redirects of unsupported af_vsock
selftests/bpf: Add asserts for netfilter link info
bpf: Fix link info netfilter flags to populate defrag flag
selftests/bpf: Add test for sign extension in coerce_subreg_to_size_sx()
selftests/bpf: Add test for truncation after sign extension in coerce_reg_to_size_sx()
bpf: Fix truncation bug in coerce_reg_to_size_sx()
selftests/bpf: Assert link info uprobe_multi count & path_size if unset
bpf: Fix unpopulated path_size when uprobe_multi fields unset
selftests/bpf: Fix cross-compiling urandom_read
selftests/bpf: Add test for kfunc module order
...
|
|
Pull kselftest fix from Shuah Khan:
- fix test makefile to install tests directory without which the test
fails with errors
* tag 'linux_kselftest-fixes-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftest: hid: add the missing tests directory
|
|
When initially adding the touchkey support, a mistake was made in the
property parsing code. The possible negative errno from
device_property_count_u32() was never checked, which was an oversight
left from converting to it from the of_property as part of the review
fixes.
Re-add the correct handling of the absent property, in which case zero
touchkeys should be assumed, which would disable the feature.
Reported-by: Jakob Hauser <jahau@rocketmail.com>
Tested-by: Jakob Hauser <jahau@rocketmail.com>
Fixes: 075d9b22c8fe ("Input: zinitix - add touchkey support")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Tested-by: Yassine Oudjana <y.oudjana@protonmail.com>
Link: https://lore.kernel.org/r/20241004-zinitix-no-keycodes-v2-1-876dc9fea4b6@trvn.ru
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Fix target passthrough identifier (Nilay)
- Fix tcp locking (Hannes)
- Replace list with sbitmap for tracking RDMA rsp tags (Guixen)
- Remove unnecessary fallthrough statements (Tokunori)
- Remove ready-without-media support (Greg)
- Fix multipath partition scan deadlock (Keith)
- Fix concurrent PCI reset and remove queue mapping (Maurizio)
- Fabrics shutdown fixes (Nilay)
- Fix for a kerneldoc warning (Keith)
- Fix a race with blk-rq-qos and wakeups (Omar)
- Cleanup of checking for always-set tag_set (SurajSonawane2415)
- Fix for a crash with CPU hotplug notifiers (Ming)
- Don't allow zero-copy ublk on unprivileged device (Ming)
- Use array_index_nospec() for CDROM (Josh)
- Remove dead code in drbd (David)
- Tweaks to elevator loading (Breno)
* tag 'block-6.12-20241018' of git://git.kernel.dk/linux:
cdrom: Avoid barrier_nospec() in cdrom_ioctl_media_changed()
nvme: use helper nvme_ctrl_state in nvme_keep_alive_finish function
nvme: make keep-alive synchronous operation
nvme-loop: flush off pending I/O while shutting down loop controller
nvme-pci: fix race condition between reset and nvme_dev_disable()
ublk: don't allow user copy for unprivileged device
blk-rq-qos: fix crash on rq_qos_wait vs. rq_qos_wake_function race
nvme-multipath: defer partition scanning
blk-mq: setup queue ->tag_set before initializing hctx
elevator: Remove argument from elevator_find_get
elevator: do not request_module if elevator exists
drbd: Remove unused conn_lowest_minor
nvme: disable CC.CRIME (NVME_CC_CRIME)
nvme: delete unnecessary fallthru comment
nvmet-rdma: use sbitmap to replace rsp free list
block: Fix elevator_get_default() checking for NULL q->tag_set
nvme: tcp: avoid race between queue_lock lock and destroy
nvmet-passthru: clear EUID/NGUID/UUID while using loop target
block: fix blk_rq_map_integrity_sg kernel-doc
|
|
Pull io_uring fixes from Jens Axboe:
- Fix a regression this merge window where cloning of registered
buffers didn't take into account the dummy_ubuf
- Fix a race with reading how many SQRING entries are available,
causing userspace to need to loop around io_uring_sqring_wait()
rather than being able to rely on SQEs being available when it
returned
- Ensure that the SQPOLL thread is TASK_RUNNING before running
task_work off the cancelation exit path
* tag 'io_uring-6.12-20241018' of git://git.kernel.dk/linux:
io_uring/sqpoll: ensure task state is TASK_RUNNING when running task_work
io_uring/rsrc: ignore dummy_ubuf for buffer cloning
io_uring/sqpoll: close race on waiting for sqring entries
|
|
Add MSI Claw A1M controller to xpad_device match table when in xinput mode.
Add MSI VID as XPAD_XBOX360_VENDOR.
Signed-off-by: John Edwards <uejji@uejji.net>
Reviewed-by: Derek J. Clark <derekjohn.clark@gmail.com>
Reviewed-by: Christopher Snowhill <kode54@gmail.com>
Link: https://lore.kernel.org/r/20241010232020.3292284-4-uejji@uejji.net
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Update Integrity Policy Enforcement (IPE) LSM tree url and
maintainer's email to the newly issued kernel.org tree/email.
Signed-off-by: Fan Wu <wufan@kernel.org>
|
|
If enabled, we fallback to the platform keyring if the trusted keyring
doesn't have the key used to sign the ipe policy. But if pkcs7_verify()
rejects the key for other reasons, such as usage restrictions, we do not
fallback. Do so, following the same change in dm-verity.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Suggested-by: Serge Hallyn <serge@hallyn.com>
[FW: fixed some line length issues and a typo in the commit message]
Signed-off-by: Fan Wu <wufan@kernel.org>
|
Ye Bin
Yu Jiaoliang
Brian Foster
Jinliang Zheng
j.xia
Long Li
Zhang Yi
Andy Shevchenko
Amir Goldstein
Zhaoyang Huang
Jiapeng Chong
Theodore Ts'o
Baokun Li
Jan Kara
Jeongjun Park
Markus Elfring
Linus Torvalds
Jens Axboe
Steven Rostedt
Nikita Travkin
John Edwards
Fan Wu
Luca Boccassi