aboutsummaryrefslogtreecommitdiffstatshomepage
AgeCommit message (Collapse)AuthorFilesLines
2024-11-18bnxt_en: Update firmware interface spec to 1.10.3.85Michael Chan1-37/+136
The major change is the new firmware command to flush the FW debug logs to the host backing store context memory buffers. Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20241115151438.550106-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18Merge branch 'wireguard-updates-and-fixes-for-6-13'Jakub Kicinski3-2/+3
Jason A. Donenfeld says: ==================== wireguard updates and fixes for 6.13 This tiny series (+3/-2) fixes one bug and has three small improvements. 1) Fix running the netns.sh test suite on systems that haven't yet inserted the nf_conntrack module. 2) Remove a stray useless function call in a selftest. 3) There's no need to zero out the netdev private data in recent kernels. 4) Set the TSO max size to be GSO_MAX_SIZE, so that we aggregate larger packets. Daniel reports seeing a 15% improvement in a simple load and suggested the speedups would be even better in more complex loads. ==================== Link: https://patch.msgid.link/20241117212030.629159-1-Jason@zx2c4.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18wireguard: device: support big tcp GSODaniel Borkmann1-0/+2
Advertise GSO_MAX_SIZE as TSO max size in order support BIG TCP for wireguard. This helps to improve wireguard performance a bit when enabled as it allows wireguard to aggregate larger skbs in wg_packet_consume_data_done() via napi_gro_receive(), but also allows the stack to build larger skbs on xmit where the driver then segments them before encryption inside wg_xmit(). We've seen a 15% improvement in TCP stream performance. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://patch.msgid.link/20241117212030.629159-5-Jason@zx2c4.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18wireguard: selftests: load nf_conntrack if not presentHangbin Liu1-0/+1
Some distros may not load nf_conntrack by default, which will cause subsequent nf_conntrack sets to fail. Load this module if it is not already loaded. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> [ Jason: add [[ -e ... ]] check so this works in the qemu harness. ] Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://patch.msgid.link/20241117212030.629159-4-Jason@zx2c4.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18wireguard: allowedips: remove redundant selftest callDheeraj Reddy Jonnalagadda1-1/+0
This commit fixes a useless call issue detected by Coverity (CID 1508092). The call to horrible_allowedips_lookup_v4 is unnecessary as its return value is never checked. Signed-off-by: Dheeraj Reddy Jonnalagadda <dheeraj.linuxdev@gmail.com> Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://patch.msgid.link/20241117212030.629159-3-Jason@zx2c4.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18wireguard: device: omit unnecessary memset of netdev private dataTobias Klauser1-1/+0
The memory for netdev_priv is allocated using kvzalloc in alloc_netdev_mqs before rtnl_link_ops->setup is called so there is no need to zero it again in wg_setup. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://patch.msgid.link/20241117212030.629159-2-Jason@zx2c4.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18net: ip: fix unexpected return in fib_validate_source()Menglong Dong1-1/+1
The errno should be replaced with drop reasons in fib_validate_source(), and the "-EINVAL" shouldn't be returned. And this causes a warning, which is reported by syzkaller: netlink: 'syz-executor371': attribute type 4 has an invalid length. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 5842 at net/core/skbuff.c:1219 __sk_skb_reason_drop net/core/skbuff.c:1216 [inline] WARNING: CPU: 0 PID: 5842 at net/core/skbuff.c:1219 sk_skb_reason_drop+0x87/0x380 net/core/skbuff.c:1241 Modules linked in: CPU: 0 UID: 0 PID: 5842 Comm: syz-executor371 Not tainted 6.12.0-rc6-syzkaller-01362-ga58f00ed24b8 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/30/2024 RIP: 0010:__sk_skb_reason_drop net/core/skbuff.c:1216 [inline] RIP: 0010:sk_skb_reason_drop+0x87/0x380 net/core/skbuff.c:1241 Code: 00 00 00 fc ff df 41 8d 9e 00 00 fc ff bf 01 00 fc ff 89 de e8 ea 9f 08 f8 81 fb 00 00 fc ff 77 3a 4c 89 e5 e8 9a 9b 08 f8 90 <0f> 0b 90 eb 5e bf 01 00 00 00 89 ee e8 c8 9f 08 f8 85 ed 0f 8e 49 RSP: 0018:ffffc90003d57078 EFLAGS: 00010293 RAX: ffffffff898c3ec6 RBX: 00000000fffbffea RCX: ffff8880347a5a00 RDX: 0000000000000000 RSI: 00000000fffbffea RDI: 00000000fffc0001 RBP: dffffc0000000000 R08: ffffffff898c3eb6 R09: 1ffff110023eb7d4 R10: dffffc0000000000 R11: ffffed10023eb7d5 R12: dffffc0000000000 R13: ffff888011f5bdc0 R14: 00000000ffffffea R15: 0000000000000000 FS: 000055557d41e380(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000056519d31d608 CR3: 000000007854e000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> kfree_skb_reason include/linux/skbuff.h:1263 [inline] ip_rcv_finish_core+0xfde/0x1b50 net/ipv4/ip_input.c:424 ip_list_rcv_finish net/ipv4/ip_input.c:610 [inline] ip_sublist_rcv+0x3b1/0xab0 net/ipv4/ip_input.c:636 ip_list_rcv+0x42b/0x480 net/ipv4/ip_input.c:670 __netif_receive_skb_list_ptype net/core/dev.c:5715 [inline] __netif_receive_skb_list_core+0x94e/0x980 net/core/dev.c:5762 __netif_receive_skb_list net/core/dev.c:5814 [inline] netif_receive_skb_list_internal+0xa51/0xe30 net/core/dev.c:5905 netif_receive_skb_list+0x55/0x4b0 net/core/dev.c:5957 xdp_recv_frames net/bpf/test_run.c:280 [inline] xdp_test_run_batch net/bpf/test_run.c:361 [inline] bpf_test_run_xdp_live+0x1b5e/0x21b0 net/bpf/test_run.c:390 bpf_prog_test_run_xdp+0x805/0x11e0 net/bpf/test_run.c:1318 bpf_prog_test_run+0x2e4/0x360 kernel/bpf/syscall.c:4266 __sys_bpf+0x48d/0x810 kernel/bpf/syscall.c:5671 __do_sys_bpf kernel/bpf/syscall.c:5760 [inline] __se_sys_bpf kernel/bpf/syscall.c:5758 [inline] __x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5758 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f18af25a8e9 Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffee4090af8 EFLAGS: 00000246 ORIG_RAX: 0000000000000141 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f18af25a8e9 RDX: 0000000000000048 RSI: 0000000020000600 RDI: 000000000000000a RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Fix it by returning "-SKB_DROP_REASON_IP_LOCAL_SOURCE" instead of "-EINVAL" in fib_validate_source(). Reported-by: syzbot+52fbd90f020788ec7709@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/6738e539.050a0220.e1c64.0002.GAE@google.com/ Fixes: 82d9983ebeb8 ("net: ip: make ip_route_input_noref() return drop reasons") Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18net/fungible: Remove unused fun_create_queueDr. David Alan Gilbert2-66/+0
fun_create_queue was added in 2022 by commit e1ffcc66818f ("net/fungible: Add service module for Fungible drivers") but hasn't been used. Remove it. Also remove the static helper functions it was the only user of. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18Merge branch 'uapi-ethtool-avoid-flex-array-in-struct-ethtool_link_settings'Jakub Kicinski10-44/+44
Kees Cook says: ==================== UAPI: ethtool: Avoid flex-array in struct ethtool_link_settings This reverts the tagged struct group in struct ethtool_link_settings and instead just removes the flexible array member from Linux's view as it is entirely unused. ==================== Link: https://patch.msgid.link/20241115204115.work.686-kees@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18UAPI: ethtool: Avoid flex-array in struct ethtool_link_settingsKees Cook1-0/+7
struct ethtool_link_settings tends to be used as a header for other structures that have trailing bytes[1], but has a trailing flexible array itself. Using this overlapped with other structures leads to ambiguous object sizing in the compiler, so we want to avoid such situations (which have caused real bugs in the past). Detecting this can be done with -Wflex-array-member-not-at-end, which will need to be enabled globally. Using a tagged struct_group() to create a new ethtool_link_settings_hdr structure isn't possible as it seems we cannot use the tagged variant of struct_group() due to syntax issues from C++'s perspective (even within "extern C")[2]. Instead, we can just leave the offending member defined in UAPI and remove it from the kernel's view of the structure, as Linux doesn't actually use this member at all. There is also no change in size since it was already a flexible array that didn't contribute to size returned by any use of sizeof(). Reported-by: Jakub Kicinski <kuba@kernel.org> Closes: https://lore.kernel.org/lkml/20241109100213.262a2fa0@kernel.org/ [2] Link: https://lore.kernel.org/lkml/0bc2809fe2a6c11dd4c8a9a10d9bd65cccdb559b.1730238285.git.gustavoars@kernel.org/ [1] Signed-off-by: Kees Cook <kees@kernel.org> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20241115204308.3821419-3-kees@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18Revert "UAPI: ethtool: Use __struct_group() in struct ethtool_link_settings"Kees Cook1-18/+15
This reverts commit 43d3487035e9a86fad952de4240a518614240d43. We cannot use tagged struct groups in UAPI because C++ will throw syntax errors even under "extern C". Signed-off-by: Kees Cook <kees@kernel.org> Link: https://patch.msgid.link/20241115204308.3821419-2-kees@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18Revert "net: ethtool: Avoid thousands of -Wflex-array-member-not-at-end warnings"Kees Cook9-26/+22
This reverts commit 3bd9b9abdf1563a22041b7255baea6d449902f1a. We cannot use the new tagged struct group because it throws C++ errors even under "extern C". Signed-off-by: Kees Cook <kees@kernel.org> Link: https://patch.msgid.link/20241115204308.3821419-1-kees@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18selftests: net: add more info to error in bpf_offloadJakub Kicinski1-2/+3
bpf_offload caught a spurious warning in TC recently, but the error message did not provide enough information to know what the problem is: FAIL: Found 'netdevsim' in command output, leaky extack? Add the extack to the output: FAIL: Unexpected command output, leaky extack? ('netdevsim', 'Warning: Filter with specified priority/protocol not found.') Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18net/smc: Run patches also by RDMA MLGerd Bayer1-0/+1
Commits for the SMC protocol usually get carried through the netdev mailing list. Some portions use InfiniBand verbs that are discussed on the RDMA mailing list. So run patches by that list too to increase the likelihood that all interested parties can see them. Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18Merge branch 'mptcp-pm-lockless-list-traversal-and-cleanup'Jakub Kicinski1-20/+13
Matthieu Baerts says: ==================== mptcp: pm: lockless list traversal and cleanup Here are two patches improving the MPTCP in-kernel path-manager. - Patch 1: the get and dump endpoints operations are iterating over the endpoints list in a lockless way. - Patch 2: reduce the code duplication to lookup an endpoint. ==================== Link: https://patch.msgid.link/20241115-net-next-mptcp-pm-lockless-dump-v1-0-f4a1bcb4ca2c@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18mptcp: pm: avoid code duplication to lookup endpGeliang Tang1-14/+6
The helper __lookup_addr() can be used in mptcp_pm_nl_get_local_id() and mptcp_pm_nl_is_backup() to simplify the code, and avoid code duplication. Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20241115-net-next-mptcp-pm-lockless-dump-v1-2-f4a1bcb4ca2c@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18mptcp: pm: lockless list traversal to dump endpMatthieu Baerts (NGI0)1-6/+7
To return an endpoint to the userspace via Netlink, and to dump all of them, the endpoint list was iterated while holding the pernet->lock, but only to read the content of the list. In these cases, the spin locks can be replaced by RCU read ones, and use the _rcu variants to iterate over the entries list in a lockless way. Note that the __lookup_addr_by_id() helper has been modified to use the _rcu variants of list_for_each_entry(), but with an extra conditions, so it can be called either while the RCU read lock is held, or when the associated pernet->lock is held. Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20241115-net-next-mptcp-pm-lockless-dump-v1-1-f4a1bcb4ca2c@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18stmmac: dwmac-intel-plat: remove redundant dwmac->data check in probeVitalii Mordan1-25/+28
The driver’s compatibility with devices is confirmed earlier in platform_match(). Since reaching probe means the device is valid, the extra check can be removed to simplify the code. Signed-off-by: Vitalii Mordan <mordan@ispras.ru> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18net: txgbe: remove GPIO interrupt controllerJiawen Wu5-196/+4
Since the GPIO interrupt controller is always not working properly, we need to constantly add workaround to cope with hardware deficiencies. So just remove GPIO interrupt controller, and let the SFP driver poll the GPIO status. Fixes: b4a2496c17ed ("net: txgbe: fix GPIO interrupt blocking") Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Link: https://patch.msgid.link/20241115071527.1129458-1-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18Merge branch 'eth-fbnic-cleanup-and-add-a-few-stats'Jakub Kicinski9-1/+475
Jakub Kicinski says: ==================== eth: fbnic: cleanup and add a few stats Cleanup trival problems with fbnic and add the PCIe and RPC (Rx parser) stats. All stats are read under rtnl_lock for now, so the code is pretty trivial. We'll need to add more locking when we start gathering drops used by .ndo_get_stats64. ==================== Link: https://patch.msgid.link/20241115015344.757567-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18eth: fbnic: add RPC hardware statisticsSanman Pradhan6-0/+180
Report Rx parser statistics via ethtool -S. The parser stats are 32b, so we need to add refresh to the service task to make sure we don't miss overflows. Signed-off-by: Sanman Pradhan <sanman.p211993@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20241115015344.757567-6-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18eth: fbnic: add PCIe hardware statisticsSanman Pradhan6-0/+231
Add PCIe hardware statistics support to the fbnic driver. These stats provide insight into PCIe transaction performance and error conditions. Which includes, read/write and completion TLP counts and DWORD counts and debug counters for tag, completion credit and NP credit exhaustion The stats are exposed via debugfs and can be used to monitor PCIe performance and debug PCIe issues. Signed-off-by: Sanman Pradhan <sanman.p211993@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20241115015344.757567-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18eth: fbnic: add basic debugfs structureJakub Kicinski4-1/+50
Add the usual debugfs structure: fbnic/ $pci-id/ device-fileA device-fileB This patch only adds the directories, subsequent changes will add files. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Link: https://patch.msgid.link/20241115015344.757567-4-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18eth: fbnic: add missing header guardsJakub Kicinski1-0/+5
While adding the SPDX headers I noticed we're also missing a header guard. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Link: https://patch.msgid.link/20241115015344.757567-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18eth: fbnic: add missing SPDX headersJakub Kicinski3-0/+9
Paolo noticed that we are missing SPDX headers, add them. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Link: https://patch.msgid.link/20241115015344.757567-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18selftests: net: netlink-dumps: validation checksJakub Kicinski1-2/+2
The sanity checks are going to get silently cast to unsigned and always pass. Cast the sizeof to signed size. Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241115003248.733862-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18net/neighbor: clear error in case strict check is not setJakub Kicinski1-0/+1
Commit 51183d233b5a ("net/neighbor: Update neigh_dump_info for strict data checking") added strict checking. The err variable is not cleared, so if we find no table to dump we will return the validation error even if user did not want strict checking. I think the only way to hit this is to send an buggy request, and ask for a table which doesn't exist, so there's no point treating this as a real fix. I only noticed it because a syzbot repro depended on it to trigger another bug. Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241115003221.733593-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18rocker: fix link status detection in rocker_carrier_init()Dmitry Antipov1-1/+1
Since '1 << rocker_port->pport' may be undefined for port >= 32, cast the left operand to 'unsigned long long' like it's done in 'rocker_port_set_enable()' above. Compile tested only. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Link: https://patch.msgid.link/20241114151946.519047-1-dmantipov@yandex.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18net: wwan: t7xx: Change PM_AUTOSUSPEND_MS to 5000Jack Wu1-1/+1
Because optimizing the power consumption of t7XX, change auto suspend time to 5000. The Tests uses a script to loop through the power_state of t7XX. (for example: /sys/bus/pci/devices/0000\:72\:00.0/power_state) * If Auto suspend is 20 seconds, test script show power_state have 0~5% of the time was in D3 state when host don't have data packet transmission. * Changed auto suspend time to 5 seconds, test script show power_state have 50%~80% of the time was in D3 state when host don't have data packet transmission. We tested Fibocom FM350 and our products using the t7xx and they all benefited from this. Signed-off-by: Jack Wu <wojackbb@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Link: https://patch.msgid.link/20241114102002.481081-1-wojackbb@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18tools: ynl-gen: allow uapi headers in sub-dirsJakub Kicinski1-0/+1
Binder places its headers under include/uapi/linux/android/ Make sure replace / with _ in the uAPI header guard, the c_upper() is more strict and only converts - to _. This is likely a good constraint to have, to enforce sane naming in enums etc. But paths may include /. Signed-off-by: Li Li <dualli@google.com> Link: https://patch.msgid.link/20241113193239.2113577-2-dualli@chromium.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18dt-bindings: net: renesas,ether: Drop undocumented "micrel,led-mode"Rob Herring (Arm)1-1/+0
"micrel,led-mode" is not yet documented by a schema. It's irrelevant to the example, so just drop it. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://patch.msgid.link/20241113225742.1784723-2-robh@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18Merge branch 'am65-cpsw-rx-dscp-prio-map'David S. Miller2-14/+122
Roger Quadros says: ==================== net: ethernet: ti: am65-cpsw: enable DSCP to priority map for RX Configure default DSCP to User Priority mapping registers as per: https://datatracker.ietf.org/doc/html/rfc8325#section-4.3 and https://datatracker.ietf.org/doc/html/rfc8622#section-11 Also update Priority to Thread maping to be compliant with IEEE802.1Q-2014. Priority Code Point (PCP) 2 is higher priority than PCP 0 (Best Effort). PCP 1 (Background) is lower priority than PCP 0 (Best Effort). --- Changes in v4: - Updated default DSCP to User Priority mapping as per https://datatracker.ietf.org/doc/html/rfc8325#section-4.3 and https://datatracker.ietf.org/doc/html/rfc8622#section-11 - Link to v3: https://lore.kernel.org/r/20241109-am65-cpsw-multi-rx-dscp-v3-0-1cfb76928490@kernel.org Changes in v3: - Added Reviewed-by tag to patch 1 - Added macros for DSCP PRI field size and DSCP PRI per register - Drop unnecessary readl() in am65_cpsw_port_set_dscp_map() - Link to v2: https://lore.kernel.org/r/20241107-am65-cpsw-multi-rx-dscp-v2-0-9e9cd1920035@kernel.org Changes in v2: - Updated references to more recent standard IEEE802.1Q-2014. - Dropped reference to web link which might change in the future. - Typo fix in commit log. - Link to v1: https://lore.kernel.org/r/20241105-am65-cpsw-multi-rx-dscp-v1-0-38db85333c88@kernel.org ==================== Signed-off-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-18net: ethernet: ti: am65-cpsw: enable DSCP to priority map for RXRoger Quadros1-0/+100
AM65 CPSW hardware can map the 6-bit DSCP/TOS field to appropriate priority queue via DSCP to Priority mapping registers (CPSW_PN_RX_PRI_MAP_REG). Use a default DSCP to User Priority (UP) mapping as per https://datatracker.ietf.org/doc/html/rfc8325#section-4.3 and https://datatracker.ietf.org/doc/html/rfc8622#section-11 Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-18net: ethernet: ti: am65-cpsw: update pri_thread_map as per IEEE802.1Q-2014Roger Quadros1-14/+22
IEEE802.1Q-2014 supersedes IEEE802.1D-2004. Now Priority Code Point (PCP) 2 is no longer at a lower priority than PCP 0. PCP 1 (Background) is still at a lower priority than PCP 0 (Best Effort). Reference: IEEE802.1Q-2014, Standard for Local and metropolitan area networks Table I-2 - Traffic type acronyms Table I-3 - Defining traffic types Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-18Merge branch 'udp-4tuple-hash'David S. Miller4-42/+468
Philo Lu says: ==================== udp: Add 4-tuple hash for connected sockets This patchset introduces 4-tuple hash for connected udp sockets, to make connected udp lookup faster. Stress test results (with 1 cpu fully used) are shown below, in pps: (1) _un-connected_ socket as server [a] w/o hash4: 1,825176 [b] w/ hash4: 1,831750 (+0.36%) (2) 500 _connected_ sockets as server [c] w/o hash4: 290860 (only 16% of [a]) [d] w/ hash4: 1,889658 (+3.1% compared with [b]) With hash4, compute_score is skipped when lookup, so [d] is slightly better than [b]. Patch1: Add a new counter for hslot2 named hash4_cnt, to avoid cache line miss when lookup. Patch2: Add hslot/hlist_nulls for 4-tuple hash. Patch3 and 4: Implement 4-tuple hash for ipv4 and ipv6. The detailed motivation is described in Patch 3. The 4-tuple hash increases the size of udp_sock and udp_hslot. Thus add it with CONFIG_BASE_SMALL, i.e., it's a no op with CONFIG_BASE_SMALL. Intentionally, the feature is not available for udplite. Though udplite shares some structs and functions with udp, its connect() keeps unchanged. So all udplite sockets perform the same as un-connected udp sockets. Besides, udplite also shares the additional memory consumption in udp_sock and udptable. changelogs: v8 -> v9 (Paolo Abeni): - Add explanation about udplite in cover letter - Update tags for co-developers - Add acked-by tags of Paolo and Willem v7 -> v8: - add EXPORT_SYMBOL for ipv6.ko build v6 -> v7 (Kuniyuki Iwashima): - export udp_ehashfn to be used by udpv6 rehash v5 -> v6 (Paolo Abeni): - move udp_table_hash4_init from patch2 to patch1 - use hlist_nulls for lookup-rehash race - add test results in commit log - add more comment, e.g., for rehash4 used in hash4 - add ipv6 support (Patch4), and refactor some functions for better sharing, without functionality change v4 -> v5 (Paolo Abeni): - add CONFIG_BASE_SMALL with which udp hash4 does nothing v3 -> v4 (Willem de Bruijn): - fix mistakes in udp_pernet_table_alloc() RFCv2 -> v3 (Gur Stavi): - minor fix in udp_hashslot2() and udp_table_init() - add rcu sync in rehash4() RFCv1 -> RFCv2: - add a new struct for hslot2 - remove the sockopt UDP_HASH4 because it has little side effect for unconnected sockets - add rehash in connect() - re-organize the patch into 3 smaller ones - other minor fix v8: https://lore.kernel.org/all/20241108054836.123484-1-lulie@linux.alibaba.com/ v7: https://lore.kernel.org/all/20241105121225.12513-1-lulie@linux.alibaba.com/ v6: https://lore.kernel.org/all/20241031124550.20227-1-lulie@linux.alibaba.com/ v5: https://lore.kernel.org/all/20241018114535.35712-1-lulie@linux.alibaba.com/ v4: https://lore.kernel.org/all/20241012012918.70888-1-lulie@linux.alibaba.com/ v3: https://lore.kernel.org/all/20241010090351.79698-1-lulie@linux.alibaba.com/ RFCv2: https://lore.kernel.org/all/20240924110414.52618-1-lulie@linux.alibaba.com/ RFCv1: https://lore.kernel.org/all/20240913100941.8565-1-lulie@linux.alibaba.com/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-18ipv6/udp: Add 4-tuple hash for connected socketPhilo Lu3-3/+103
Implement ipv6 udp hash4 like that in ipv4. The major difference is that the hash value should be calculated with udp6_ehashfn(). Besides, ipv4-mapped ipv6 address is handled before hash() and rehash(). Export udp_ehashfn because now we use it in udpv6 rehash. Core procedures of hash/unhash/rehash are same as ipv4, and udpv4 and udpv6 share the same udptable, so some functions in ipv4 hash4 can also be shared. Co-developed-by: Cambda Zhu <cambda@linux.alibaba.com> Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com> Co-developed-by: Fred Chen <fred.cc@alibaba-inc.com> Signed-off-by: Fred Chen <fred.cc@alibaba-inc.com> Co-developed-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com> Signed-off-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com> Signed-off-by: Philo Lu <lulie@linux.alibaba.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-18ipv4/udp: Add 4-tuple hash for connected socketPhilo Lu3-5/+210
Currently, the udp_table has two hash table, the port hash and portaddr hash. Usually for UDP servers, all sockets have the same local port and addr, so they are all on the same hash slot within a reuseport group. In some applications, UDP servers use connect() to manage clients. In particular, when firstly receiving from an unseen 4 tuple, a new socket is created and connect()ed to the remote addr:port, and then the fd is used exclusively by the client. Once there are connected sks in a reuseport group, udp has to score all sks in the same hash2 slot to find the best match. This could be inefficient with a large number of connections, resulting in high softirq overhead. To solve the problem, this patch implement 4-tuple hash for connected udp sockets. During connect(), hash4 slot is updated, as well as a corresponding counter, hash4_cnt, in hslot2. In __udp4_lib_lookup(), hslot4 will be searched firstly if the counter is non-zero. Otherwise, hslot2 is used like before. Note that only connected sockets enter this hash4 path, while un-connected ones are not affected. hlist_nulls is used for hash4, because we probably move to another hslot wrongly when lookup with concurrent rehash. Then we check nulls at the list end to see if we should restart lookup. Because udp does not use SLAB_TYPESAFE_BY_RCU, we don't need to touch sk_refcnt when lookup. Stress test results (with 1 cpu fully used) are shown below, in pps: (1) _un-connected_ socket as server [a] w/o hash4: 1,825176 [b] w/ hash4: 1,831750 (+0.36%) (2) 500 _connected_ sockets as server [c] w/o hash4: 290860 (only 16% of [a]) [d] w/ hash4: 1,889658 (+3.1% compared with [b]) With hash4, compute_score is skipped when lookup, so [d] is slightly better than [b]. Co-developed-by: Cambda Zhu <cambda@linux.alibaba.com> Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com> Co-developed-by: Fred Chen <fred.cc@alibaba-inc.com> Signed-off-by: Fred Chen <fred.cc@alibaba-inc.com> Co-developed-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com> Signed-off-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com> Signed-off-by: Philo Lu <lulie@linux.alibaba.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-18net/udp: Add 4-tuple hash list basisPhilo Lu3-5/+97
Add a new hash list, hash4, in udp table. It will be used to implement 4-tuple hash for connected udp sockets. This patch adds the hlist to table, and implements helpers and the initialization. 4-tuple hash is implemented in the following patch. hash4 uses hlist_nulls to avoid moving wrongly onto another hlist due to concurrent rehash, because rehash() can happen with lookup(). Co-developed-by: Cambda Zhu <cambda@linux.alibaba.com> Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com> Co-developed-by: Fred Chen <fred.cc@alibaba-inc.com> Signed-off-by: Fred Chen <fred.cc@alibaba-inc.com> Co-developed-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com> Signed-off-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com> Signed-off-by: Philo Lu <lulie@linux.alibaba.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-18net/udp: Add a new struct for hash2 slotPhilo Lu3-34/+63
Preparing for udp 4-tuple hash (uhash4 for short). To implement uhash4 without cache line missing when lookup, hslot2 is used to record the number of hashed sockets in hslot4. Thus adding a new struct udp_hslot_main with field hash4_cnt, which is used by hash2. The new struct is used to avoid doubling the size of udp_hslot. Before uhash4 lookup, firstly checking hash4_cnt to see if there are hashed sks in hslot4. Because hslot2 is always used in lookup, there is no cache line miss. Related helpers are updated, and use the helpers as possible. uhash4 is implemented in following patches. Signed-off-by: Philo Lu <lulie@linux.alibaba.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-18Merge tag 'ipsec-next-2024-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-nextDavid S. Miller12-40/+284
Steffen Klassert says: ==================== ipsec-next-11-15 1) Add support for RFC 9611 per cpu xfrm state handling. 2) Add inbound and outbound xfrm state caches to speed up state lookups. 3) Convert xfrm to dscp_t. From Guillaume Nault. 4) Fix error handling in build_aevent. From Everest K.C. 5) Replace strncpy with strscpy_pad in copy_to_user_auth. From Daniel Yang. 6) Fix an uninitialized symbol during acquire state insertion. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-15Merge branch 'virtio-net-support-af_xdp-zero-copy-tx'Jakub Kicinski3-249/+489
Xuan Zhuo says: ==================== virtio-net: support AF_XDP zero copy (tx) XDP socket(AF_XDP) is an excellent bypass kernel network framework. The zero copy feature of xsk (XDP socket) needs to be supported by the driver. The performance of zero copy is very good. mlx5 and intel ixgbe already support this feature, This patch set allows virtio-net to support xsk's zerocopy xmit feature. At present, we have completed some preparation: 1. vq-reset (virtio spec and kernel code) 2. virtio-core premapped dma 3. virtio-net xdp refactor So it is time for Virtio-Net to complete the support for the XDP Socket Zerocopy. Virtio-net can not increase the queue num at will, so xsk shares the queue with kernel. This patch set includes some refactor to the virtio-net to let that to support AF_XDP. The current configuration sets the virtqueue (vq) to premapped mode, implying that all buffers submitted to this queue must be mapped ahead of time. This presents a challenge for the virtnet send queue (sq): the virtnet driver would be required to keep track of dma information for vq size * 17, which can be substantial. However, if the premapped mode were applied on a per-buffer basis, the complexity would be greatly reduced. With AF_XDP enabled, AF_XDP buffers would become premapped, while kernel skb buffers could remain unmapped. We can distinguish them by sg_page(sg), When sg_page(sg) is NULL, this indicates that the driver has performed DMA mapping in advance, allowing the Virtio core to directly utilize sg_dma_address(sg) without conducting any internal DMA mapping. Additionally, DMA unmap operations for this buffer will be bypassed. ENV: Qemu with vhost-user(polling mode). Host CPU: Intel(R) Xeon(R) Platinum 8163 CPU @ 2.50GHz testpmd> show port stats all ######################## NIC statistics for port 0 ######################## RX-packets: 19531092064 RX-missed: 0 RX-bytes: 1093741155584 RX-errors: 0 RX-nombuf: 0 TX-packets: 5959955552 TX-errors: 0 TX-bytes: 371030645664 Throughput (since last show) Rx-pps: 8861574 Rx-bps: 3969985208 Tx-pps: 8861493 Tx-bps: 3969962736 ############################################################################ testpmd> show port stats all ######################## NIC statistics for port 0 ######################## RX-packets: 68152727 RX-missed: 0 RX-bytes: 3816552712 RX-errors: 0 RX-nombuf: 0 TX-packets: 68114967 TX-errors: 33216 TX-bytes: 3814438152 Throughput (since last show) Rx-pps: 6333196 Rx-bps: 2837272088 Tx-pps: 6333227 Tx-bps: 2837285936 ############################################################################ But AF_XDP consumes more CPU for tx and rx napi(100% and 86%). ==================== Link: https://patch.msgid.link/20241112012928.102478-1-xuanzhuo@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15virtio_net: xdp_features add NETDEV_XDP_ACT_XSK_ZEROCOPYXuan Zhuo1-1/+2
Now, we support AF_XDP(xsk). Add NETDEV_XDP_ACT_XSK_ZEROCOPY to xdp_features. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20241112012928.102478-14-xuanzhuo@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15virtio_net: update tx timeout recordXuan Zhuo1-0/+7
If send queue sent some packets, we update the tx timeout record to prevent the tx timeout. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20241112012928.102478-13-xuanzhuo@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15virtio_net: xsk: tx: support xmit xsk bufferXuan Zhuo1-11/+168
The driver's tx napi is very important for XSK. It is responsible for obtaining data from the XSK queue and sending it out. At the beginning, we need to trigger tx napi. virtnet_free_old_xmit distinguishes three type ptr(skb, xdp frame, xsk buffer) by the last bits of the pointer. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20241112012928.102478-12-xuanzhuo@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15virtio_net: xsk: prevent disable tx napiXuan Zhuo1-1/+9
Since xsk's TX queue is consumed by TX NAPI, if sq is bound to xsk, then we must stop tx napi from being disabled. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20241112012928.102478-11-xuanzhuo@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15virtio_net: xsk: bind/unbind xsk for txXuan Zhuo1-0/+53
This patch implement the logic of bind/unbind xsk pool to sq and rq. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20241112012928.102478-10-xuanzhuo@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15virtio_net: refactor the xmit typeXuan Zhuo1-39/+51
Because the af-xdp will introduce a new xmit type, so I refactor the xmit type mechanism first. We know both xdp_frame and sk_buff are at least 4 bytes aligned. For the xdp tx, we do not pass any pointer to virtio core as data, we just need to pass the len of the packet. So we will push len to the void pointer. We can make sure the pointer is 4 bytes aligned. And the data structure of AF_XDP also is at least 4 bytes aligned. So the last two bits of the pointers are free, we can't use these to distinguish them. 00 for skb 01 for SKB_ORPHAN 10 for XDP 11 for AF-XDP tx Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20241112012928.102478-9-xuanzhuo@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15virtio_ring: remove API virtqueue_set_dma_premappedXuan Zhuo3-63/+0
Now, this API is useless. remove it. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20241112012928.102478-8-xuanzhuo@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15virtio-net: rq submits premapped per-bufferXuan Zhuo1-11/+11
virtio-net rq submits premapped per-buffer by setting sg page to NULL; Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20241112012928.102478-7-xuanzhuo@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15virtio_ring: introduce add api for premappedXuan Zhuo2-0/+59
Two APIs are introduced to submit premapped per-buffers. int virtqueue_add_inbuf_premapped(struct virtqueue *vq, struct scatterlist *sg, unsigned int num, void *data, void *ctx, gfp_t gfp); int virtqueue_add_outbuf_premapped(struct virtqueue *vq, struct scatterlist *sg, unsigned int num, void *data, gfp_t gfp); Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20241112012928.102478-6-xuanzhuo@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.