| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
After the last patch removing vlan_rwsem, it is an incremental step to
allow ipoib to work with netdevs that require the instance lock.
In several places, netdev_lock() is changed to netdev_lock_ops_to_full()
which takes care of not acquiring the lock again when the netdev is
already locked.
In ipoib_ib_tx_timeout_work() and __ipoib_ib_dev_flush() for HEAVY
flushes, the netdev lock is acquired/released. This is needed because
these functions end up calling .ndo_stop()/.ndo_open() on subinterfaces,
and the device may expect the netdev instance lock to be held.
ipoib_set_mode() now explicitly acquires ops lock while manipulating the
features, mtu and tx queues.
Finally, ipoib_napi_enable()/ipoib_napi_disable() now use the *_locked
variants of the napi_enable()/napi_disable() calls and optionally
acquire the netdev lock themselves depending on the dev they operate on.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1747829342-1018757-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
vlan_rwsem was added more than a decade ago to work around a deadlock
involving the original mutex being acquired twice, once from the wq.
Subsequent changes then tweaked it to partially protect access to
ipoib_dev_priv->child_intfs together with the RTNL. Flushing the wq
synchronously was also since then refactored to happen separately.
This semaphore unfortunately prevents updating ipoib to work with
devices that require the netdev lock, because of lock ordering issues
between RTNL, vlan_rwsem and the netdev instance locks of parent and
child devices.
To uncomplicate things, this commit replaces vlan_rwsem with the netdev
instance lock of the parent device. Both parent child_intfs list and the
children's list membership in it require holding the parent netdev
instance lock.
All call paths were carefully reviewed and no-longer-needed ASSERT_RTNL
calls were dropped. Some non-trivial changes:
- ipoib_match_gid_pkey_addr() now only acquires the instance lock and
iterates through child_intfs for the first level of recursion (the
parent), as it's not possible to have multiple levels of nested
subinterfaces.
- ipoib_open() and ipoib_stop() schedule tasks on the global workqueue
to open/stop child interfaces to avoid potentially acquiring nested
netdev instance locks. To avoid the device going away between the task
scheduling and execution, netdev_hold/netdev_put are used.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1747829342-1018757-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Previously, flushing a netdevice involved first flushing all child
devices from the flush task itself. That requires holding the lock that
protects the list for the entire duration of the flush.
This poses a problem when converting from vlan_rwsem to the netdev
instance lock (next patch), because holding the parent lock while
trying to acquire a child lock makes lockdep unhappy, rightfully.
Fix this by splitting a big flush task into individual flush tasks
(all are already created in their respective ipoib_dev_priv structs)
and defining a helper function to enqueue all of them while holding the
list lock.
In ipoib_set_mac, the function is not used and the task is enqueued
directly, because in the subsequent patches locking is changed and this
function may be called with the netdev instance lock held.
This is effectively a noop, the wq is single-threaded and ordered and
will execute the same flush operations in the same order as before.
Furthermore, there should be no new races because
ipoib_parent_unregister_pre() calls flush_workqueue() after stopping new
work generation to wait for pending work to complete. flush_workqueue()
waits for all currently enqueued work to finish before returning.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1747829342-1018757-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull pin control fixes from Linus Walleij:
"This deals with a crash in the Qualcomm pin controller GPIO
parts when using hogs.
The first patch to gpiolib makes gpiochip_line_is_valid()
NULL-tolerant.
The second patch fixes the actual problem"
* tag 'pinctrl-v6.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: qcom: switch to devm_register_sys_off_handler()
gpiolib: don't crash on enabling GPIO HOG pins
|
|
Pull sound fixes from Takashi Iwai:
"A collection of small fixes for 6.15 final. It became slightly a
higher amount than expected, but all look easy and safe to apply:
- A fix for PCM core race spotted by fuzzing
- ASoC topology fix for single DAI link
- UAF fix for ASoC SOF Intel HD-audio at reloading
- ASoC SOF Intel and Mediatek fixes
- Trivial HD-audio quirks as usual"
* tag 'sound-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek - Add new HP ZBook laptop with micmute led fixup
ALSA: hda/realtek: Add support for HP Agusta using CS35L41 HDA
ALSA: hda/realtek: Add quirk for Lenovo Yoga Pro 7 14ASP10
ALSA: hda/realtek - restore auto-mute mode for Dell Chrome platform
ALSA: pcm: Fix race of buffer access at PCM OSS layer
ASoC: SOF: Intel: hda: Fix UAF when reloading module
ASoc: SOF: topology: connect DAI to a single DAI link
ASoC: SOF: Intel: hda-bus: Use PIO mode on ACE2+ platforms
ASoC: SOF: ipc4-pcm: Delay reporting is only supported for playback direction
ASoC: SOF: ipc4-control: Use SOF_CTRL_CMD_BINARY as numid for bytes_ext
ASoC: mediatek: mt8188-mt6359: Depend on MT6359_ACCDET set or disabled
ASoC: mediatek: mt8188-mt6359: select CONFIG_SND_SOC_MT6359_ACCDET
|
|
When xdp is attached or detached, dev->ndo_bpf() is called by
do_setlink(), and it acquires netdev_lock() if needed.
Unlike other drivers, the bnxt driver is protected by netdev_lock while
xdp is attached/detached because it sets dev->request_ops_lock to true.
So, the bnxt_xdp(), that is callback of ->ndo_bpf should not acquire
netdev_lock().
But the xdp_features_{set | clear}_redirect_target() was changed to
acquire netdev_lock() internally.
It causes a deadlock.
To fix this problem, bnxt driver should use
xdp_features_{set | clear}_redirect_target_locked() instead.
Splat looks like:
============================================
WARNING: possible recursive locking detected
6.15.0-rc6+ #1 Not tainted
--------------------------------------------
bpftool/1745 is trying to acquire lock:
ffff888131b85038 (&dev->lock){+.+.}-{4:4}, at: xdp_features_set_redirect_target+0x1f/0x80
but task is already holding lock:
ffff888131b85038 (&dev->lock){+.+.}-{4:4}, at: do_setlink.constprop.0+0x24e/0x35d0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&dev->lock);
lock(&dev->lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by bpftool/1745:
#0: ffffffffa56131c8 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_setlink+0x1fe/0x570
#1: ffffffffaafa75a0 (&net->rtnl_mutex){+.+.}-{4:4}, at: rtnl_setlink+0x236/0x570
#2: ffff888131b85038 (&dev->lock){+.+.}-{4:4}, at: do_setlink.constprop.0+0x24e/0x35d0
stack backtrace:
CPU: 1 UID: 0 PID: 1745 Comm: bpftool Not tainted 6.15.0-rc6+ #1 PREEMPT(undef)
Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021
Call Trace:
<TASK>
dump_stack_lvl+0x7a/0xd0
print_deadlock_bug+0x294/0x3d0
__lock_acquire+0x153b/0x28f0
lock_acquire+0x184/0x340
? xdp_features_set_redirect_target+0x1f/0x80
__mutex_lock+0x1ac/0x18a0
? xdp_features_set_redirect_target+0x1f/0x80
? xdp_features_set_redirect_target+0x1f/0x80
? __pfx_bnxt_rx_page_skb+0x10/0x10 [bnxt_en
? __pfx___mutex_lock+0x10/0x10
? __pfx_netdev_update_features+0x10/0x10
? bnxt_set_rx_skb_mode+0x284/0x540 [bnxt_en
? __pfx_bnxt_set_rx_skb_mode+0x10/0x10 [bnxt_en
? xdp_features_set_redirect_target+0x1f/0x80
xdp_features_set_redirect_target+0x1f/0x80
bnxt_xdp+0x34e/0x730 [bnxt_en 11cbcce8fa11cff1dddd7ef358d6219e4ca9add3]
dev_xdp_install+0x3f4/0x830
? __pfx_bnxt_xdp+0x10/0x10 [bnxt_en 11cbcce8fa11cff1dddd7ef358d6219e4ca9add3]
? __pfx_dev_xdp_install+0x10/0x10
dev_xdp_attach+0x560/0xf70
dev_change_xdp_fd+0x22d/0x280
do_setlink.constprop.0+0x2989/0x35d0
? __pfx_do_setlink.constprop.0+0x10/0x10
? lock_acquire+0x184/0x340
? find_held_lock+0x32/0x90
? rtnl_setlink+0x236/0x570
? rcu_is_watching+0x11/0xb0
? trace_contention_end+0xdc/0x120
? __mutex_lock+0x946/0x18a0
? __pfx___mutex_lock+0x10/0x10
? __lock_acquire+0xa95/0x28f0
? rcu_is_watching+0x11/0xb0
? rcu_is_watching+0x11/0xb0
? cap_capable+0x172/0x350
rtnl_setlink+0x2cd/0x570
Fixes: 03df156dd3a6 ("xdp: double protect netdev->xdp_flags with netdev->lock")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250520071155.2462843-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With a VRF, ipv4 and ipv6 FIB expression behave differently.
fib daddr . iif oif
Will return the input interface name for ipv4, but the real device
for ipv6. Example:
If VRF device name is tvrf and real (incoming) device is veth0.
First round is ok, both ipv4 and ipv6 will yield 'veth0'.
But in the second round (incoming device will be set to "tvrf"), ipv4
will yield "tvrf" whereas ipv6 returns "veth0" for the second round too.
This makes ipv6 behave like ipv4.
A followup patch will add a test case for this, without this change
it will fail with:
get element inet t fibif6iif { tvrf . dead:1::99 . tvrf }
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
FAIL: did not find tvrf . dead:1::99 . tvrf in fibif6iif
Alternatively we could either not do anything at all or change
ipv4 to also return the lower/real device, however, nft (userspace)
doc says "iif: if fib lookup provides a route then check its output
interface is identical to the packets input interface." which is what
the nft fib ipv4 behaviour is.
Fixes: f6d0cbcf09c5 ("netfilter: nf_tables: add fib expression")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
It was located in conntrack_vrf.sh because that already had the VRF bits.
Lets not add to this and move it to nft_fib.sh where this belongs.
No functional changes for the subtest intended.
The subtest is limited, it only covered 'fib oif'
(route output interface query) when the incoming interface is part
of a VRF.
Next we can extend it to cover 'fib type' for VRFs and also check fib
results when there is an unrelated VRF in same netns.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
fib can either lookup the interface id/name of the output interface that
would be used for the given address, or it can check for the type of the
address according to the fib, e.g. local, unicast, multicast and so on.
This can be used to e.g. make a locally configured address only reachable
through its interface.
Example: given eth0:10.1.1.1 and eth1:10.1.2.1 then 'fib daddr type' for
10.1.1.1 arriving on eth1 will be 'local', but 'fib daddr . iif type' is
expected to return 'unicast', whereas 'fib daddr' and 'fib daddr . iif'
are expected to indicate 'local' if such a packet arrives on eth0.
So far nft_fib.sh only covered oif/oifname, not type.
Repeat tests both with default and a policy (ip rule) based setup.
Also try to run all remaining tests even if a subtest has failed.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Its now possible to build a kernel that has no support for the classic
xtables get/setsockopt interfaces and builtin tables.
In this case, we have CONFIG_IP6_NF_MANGLE=n and
CONFIG_IP_NF_ARPTABLES=n.
For optstript, the ipv6 code is so small that we can enable it if
netfilter ipv6 support exists. For mark, check if either classic
arptables or NFT_ARP_COMPAT is set.
Fixes: a9525c7f6219 ("netfilter: xtables: allow xtables-nft only builds")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Pipapo supports a more compact '4 bit group' format that is chosen when
the memory needed for the default exceeds a threshold (2mb).
Add coverage for those code paths, the existing tests use small sets that
are handled by the default representation.
This comes with a test script run-time increase, but I think its ok:
normal: 2m35s -> 3m9s
debug: 3m24s -> 5m29s (with KSFT_MACHINE_SLOW=yes).
Cc: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Multi-PTP source support within a network topology has been merged,
but the hardware timestamp source is not yet exposed to users.
Currently, users only see the PTP index, which does not indicate
whether the timestamp comes from a PHY or a MAC.
Add support for reporting the hwtstamp source using a
hwtstamp-source field, alongside hwtstamp-phyindex, to describe
the origin of the hardware timestamp.
Remove HWTSTAMP_SOURCE_UNSPEC enum value as it is not used at all.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250519-feature_ptp_source-v4-1-5d10e19a0265@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Felix Fietkau says:
===================
mt76 patches for 6.16
- fixes
- EHT improvements
- new device ids
===================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Jeff Johnson says:
==================
ath.git patches for v6.16
ath12k:
Add monitor mode support for WCN7850.
Enhance regulatory support including 6 GHz power modes.
In addition, perform the usual set of bug fixes and cleanups across
all supported drivers.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add mac80211 rfkill_poll ops to monitor hardware rfkill state
and state change will be updated.
Signed-off-by: Allan Wang <allan.wang@mediatek.com>
Link: https://patch.msgid.link/20250507053131.4173691-1-allan.wang@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
One variant of MT7992 has 5 TX paths, so extend the power delta function
to support it. Also, rename nss_delta to path_delta since the value is
based on the number of TX paths rather tha the number of spatial streams.
(path delta [0.5 dBm] = 10 * log(path number) [dBm] * 2)
Co-developed-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20250515032952.1653494-9-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Check if available_antennas_tx and available_antennas_rx are already set
during the per-chip initialization phase; otherwise, they could be
overwritten with incorrect values.
Fixes: 69d54ce7491d ("wifi: mt76: mt7996: switch to single multi-radio wiphy")
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20250515032952.1653494-8-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Some management frames are first processed by the firmware and then
passed to the driver through the MCU event rings. In CONNAC3, event rings
do not support scatter-gather and have a size limitation of 2048 bytes.
If a packet sized between 1728 and 2048 bytes arrives from an event ring,
the ring will hang because the driver attempts to use scatter-gather to
process it.
To fix this, include the size of struct skb_shared_info in the MCU RX
buffer size to prevent scatter-gather from being used for event skb in
mt76_dma_rx_fill_buf().
Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20250515032952.1653494-7-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
According to hardware capability, the maximum beacon size is 2048 bytes
minus the size of TLV headers.
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20250515032952.1653494-6-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
The maximum TX path and NSS may differ on a band. For example, one variant
of the MT7992 has 5 TX paths and 4 NSS on the 5 GHz band. To address this,
add orig_antenna_mask to record the maximum NSS and prevent setting an
invalid NSS in mt7996_set_antenna().
Fixes: 69d54ce7491d ("wifi: mt76: mt7996: switch to single multi-radio wiphy")
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20250515032952.1653494-5-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
IEEE 802.11 fragmentation can only be applied to unicast frames.
Therefore, drop fragments with multicast or broadcast RA. This patch
addresses vulnerabilities such as CVE-2020-26145.
Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20250515032952.1653494-4-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Set the max AMPDU length in the EHT MAC CAP. Without this patch, the
peer station cannot obtain the correct capability, which prevents
achieving peak throughput on the 2 GHz band.
Fixes: 1816ad9381e0 ("wifi: mt76: mt7996: add max mpdu len capability")
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20250515032952.1653494-3-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Fix the beamformee SS field for the mt7996, mt7992 and mt7990 chipsets.
For the mt7992, this value shall be set to 0x4, while the others shall
be set to 0x3.
Fixes: 5b20557593d4 ("wifi: mt76: connac: adjust phy capabilities based on band constraints")
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20250515032952.1653494-2-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
The firmware only supports full bandwidth UL MU-MIMO, so remove the
partial bandwidth capability from HE PHY CAP.
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20250515032952.1653494-1-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
The test mode interface allows controlled execution of chip-level
operations such as continuous transmission, reception tests, and
register access, which are essential during bring-up, diagnostics,
and factory testing.
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Michael Lo <michael.lo@mediatek.com>
Link: https://patch.msgid.link/20250505233618.1951021-2-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Add MCU command and its handling needed for testmode support on
MT7925. This enables low-level chip testing features such as
continuous TX/RX..
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Michael Lo <michael.lo@mediatek.com>
Link: https://patch.msgid.link/20250505233618.1951021-1-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Modify MCU command sending functions to wait for a response,
ensuring consistent behavior across all commands and improves
reliability by confirming that each command is processed
successfully.
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Michael Lo <michael.lo@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250414013954.1151774-3-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Remove a duplicate call to `mt76_mcu_send_msg` to fix redundant operations
in the sniffer command handling.
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250414013954.1151774-2-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Add a check to ensure only one scan command is active at a time
by testing the MT76_HW_SCANNING state.
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250414013954.1151774-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
devm_ioremap() returns NULL on error. Currently, mt7915_mmio_wed_init()
does not check for this case, which results in a NULL pointer
dereference.
Prevent null pointer dereference in mt7915_mmio_wed_init().
Fixes: 4f831d18d12d ("wifi: mt76: mt7915: enable WED RX support")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Link: https://patch.msgid.link/20250407061900.85317-1-bsdhenrymartin@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
devm_ioremap() returns NULL on error. Currently, mt7996_mmio_wed_init()
does not check for this case, which results in a NULL pointer
dereference.
Prevent null pointer dereference in mt7996_mmio_wed_init()
Fixes: 83eafc9251d6 ("wifi: mt76: mt7996: add wed tx support")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Link: https://patch.msgid.link/20250407032349.83360-1-bsdhenrymartin@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Enhance the mt7925 to include RNR scan support. It adds
the necessary RNR information to the scan command.
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250321013829.3598-2-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Introduce mt76_connac_mcu_build_rnr_scan_param routine for handling
RNR scan. This is a preliminary patch to enable RNR scan in mt7921 and
mt7925 driver.
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250321013829.3598-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202504011739.HvUKtUUe-lkp@intel.com/
Fixes: 3ba20af886d1 ("wifi: mt76: scan: set vif offchannel link for scanning/roc")
Signed-off-by: Feng Jiang <jiangfeng@kylinos.cn>
Link: https://patch.msgid.link/20250402062415.25434-1-jiangfeng@kylinos.cn
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Marc Kleine-Budde says:
====================
pull-request: can 2025-05-22
this is a pull request of 4 patches for net/main.
The first 3 patches are by Axel Forsman and fix a ISR race condition
in the kvaser_pciefd driver.
The last patch is by Carlos Sanchez and fixes the reception of short
error messages in the slcan driver.
* tag 'linux-can-fixes-for-6.15-20250521' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: slcan: allow reception of short error messages
can: kvaser_pciefd: Continue parsing DMA buf after dropped RX
can: kvaser_pciefd: Fix echo_skb race
can: kvaser_pciefd: Force IRQ edge in case of nested IRQ
====================
Link: https://patch.msgid.link/20250522082344.490913-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Geetha sowjanya says:
====================
octeontx2-af: APR Mapping Fixes
This patch series includes fixes related to APR (LMT)
mapping and debugfs support.
Changes include:
Patch 1:Set LMT_ENA bit for APR table entries.
Enables the LMT line for each PF/VF by setting
the LMT_ENA bit in the APR_LMT_MAP_ENTRY_S
structure.
Patch-2:Fix APR entry in debugfs
The APR table was previously mapped using a fixed size,
which could lead to incorrect mappings when the number
of PFs and VFs differed from the assumed value.
This patch updates the logic to calculate the APR table
size dynamically, based on values from the APR_LMT_CFG
register, ensuring correct representation in debugfs.
====================
Link: https://patch.msgid.link/20250521060834.19780-1-gakula@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The current implementation maps the APR table using a fixed size,
which can lead to incorrect mapping when the number of PFs and VFs
varies.
This patch corrects the mapping by calculating the APR table
size dynamically based on the values configured in the
APR_LMT_CFG register, ensuring accurate representation
of APR entries in debugfs.
Fixes: 0daa55d033b0 ("octeontx2-af: cn10k: debugfs for dumping LMTST map table").
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Link: https://patch.msgid.link/20250521060834.19780-3-gakula@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch enables the LMT line for a PF/VF by setting the
LMT_ENA bit in the APR_LMT_MAP_ENTRY_S structure.
Additionally, it simplifies the logic for calculating the
LMTST table index by consistently using the maximum
number of hw supported VFs (i.e., 256).
Fixes: 873a1e3d207a ("octeontx2-af: cn10k: Setting up lmtst map table").
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250521060834.19780-2-gakula@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Steffen Klassert says:
====================
pull request (net): ipsec 2025-05-21
1) Fix some missing kfree_skb in the error paths of espintcp.
From Sabrina Dubroca.
2) Fix a reference leak in espintcp.
From Sabrina Dubroca.
3) Fix UDP GRO handling for ESPINUDP.
From Tobias Brunner.
4) Fix ipcomp truesize computation on the receive path.
From Sabrina Dubroca.
5) Sanitize marks before policy/state insertation.
From Paul Chaignon.
* tag 'ipsec-2025-05-21' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: Sanitize marks before insert
xfrm: ipcomp: fix truesize computation on receive
xfrm: Fix UDP GRO handling for some corner cases
espintcp: remove encap socket caching to avoid reference leak
espintcp: fix skb leaks
====================
Link: https://patch.msgid.link/20250521054348.4057269-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Syzbot reported a slab-use-after-free with the following call trace:
==================================================================
BUG: KASAN: slab-use-after-free in tipc_aead_encrypt_done+0x4bd/0x510 net/tipc/crypto.c:840
Read of size 8 at addr ffff88807a733000 by task kworker/1:0/25
Call Trace:
kasan_report+0xd9/0x110 mm/kasan/report.c:601
tipc_aead_encrypt_done+0x4bd/0x510 net/tipc/crypto.c:840
crypto_request_complete include/crypto/algapi.h:266
aead_request_complete include/crypto/internal/aead.h:85
cryptd_aead_crypt+0x3b8/0x750 crypto/cryptd.c:772
crypto_request_complete include/crypto/algapi.h:266
cryptd_queue_worker+0x131/0x200 crypto/cryptd.c:181
process_one_work+0x9fb/0x1b60 kernel/workqueue.c:3231
Allocated by task 8355:
kzalloc_noprof include/linux/slab.h:778
tipc_crypto_start+0xcc/0x9e0 net/tipc/crypto.c:1466
tipc_init_net+0x2dd/0x430 net/tipc/core.c:72
ops_init+0xb9/0x650 net/core/net_namespace.c:139
setup_net+0x435/0xb40 net/core/net_namespace.c:343
copy_net_ns+0x2f0/0x670 net/core/net_namespace.c:508
create_new_namespaces+0x3ea/0xb10 kernel/nsproxy.c:110
unshare_nsproxy_namespaces+0xc0/0x1f0 kernel/nsproxy.c:228
ksys_unshare+0x419/0x970 kernel/fork.c:3323
__do_sys_unshare kernel/fork.c:3394
Freed by task 63:
kfree+0x12a/0x3b0 mm/slub.c:4557
tipc_crypto_stop+0x23c/0x500 net/tipc/crypto.c:1539
tipc_exit_net+0x8c/0x110 net/tipc/core.c:119
ops_exit_list+0xb0/0x180 net/core/net_namespace.c:173
cleanup_net+0x5b7/0xbf0 net/core/net_namespace.c:640
process_one_work+0x9fb/0x1b60 kernel/workqueue.c:3231
After freed the tipc_crypto tx by delete namespace, tipc_aead_encrypt_done
may still visit it in cryptd_queue_worker workqueue.
I reproduce this issue by:
ip netns add ns1
ip link add veth1 type veth peer name veth2
ip link set veth1 netns ns1
ip netns exec ns1 tipc bearer enable media eth dev veth1
ip netns exec ns1 tipc node set key this_is_a_master_key master
ip netns exec ns1 tipc bearer disable media eth dev veth1
ip netns del ns1
The key of reproduction is that, simd_aead_encrypt is interrupted, leading
to crypto_simd_usable() return false. Thus, the cryptd_queue_worker is
triggered, and the tipc_crypto tx will be visited.
tipc_disc_timeout
tipc_bearer_xmit_skb
tipc_crypto_xmit
tipc_aead_encrypt
crypto_aead_encrypt
// encrypt()
simd_aead_encrypt
// crypto_simd_usable() is false
child = &ctx->cryptd_tfm->base;
simd_aead_encrypt
crypto_aead_encrypt
// encrypt()
cryptd_aead_encrypt_enqueue
cryptd_aead_enqueue
cryptd_enqueue_request
// trigger cryptd_queue_worker
queue_work_on(smp_processor_id(), cryptd_wq, &cpu_queue->work)
Fix this by holding net reference count before encrypt.
Reported-by: syzbot+55c12726619ff85ce1f6@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=55c12726619ff85ce1f6
Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Link: https://patch.msgid.link/20250520101404.1341730-1-wangliang74@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Priority flow control is not supported for LBK and SDP vf. This patch
adds support to not add dcbnl_ops for LBK and SDP vf.
Fixes: 8e67558177f8 ("octeontx2-pf: PFC config support with DCBx")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250519072658.2960851-1-sumang@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Cong Wang says:
====================
net_sched: Fix HFSC qlen/backlog accounting bug and add selftest
This series addresses a long-standing bug in the HFSC qdisc where queue length
and backlog accounting could become inconsistent if a packet is dropped during
a peek-induced dequeue operation, and adds a corresponding selftest to tc-testing.
====================
Link: https://patch.msgid.link/20250518222038.58538-1-xiyou.wangcong@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This test reproduces a scenario where HFSC queue length and backlog accounting
can become inconsistent when a peek operation triggers a dequeue and possible
drop before the parent qdisc updates its counters. The test sets up a DRR root
qdisc with an HFSC class, netem, and blackhole children, and uses Scapy to
inject a packet. It helps to verify that HFSC correctly tracks qlen and backlog
even when packets are dropped during peek-induced dequeue.
Cc: Mingi Cho <mincho@theori.io>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250518222038.58538-3-xiyou.wangcong@gmail.com
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When enqueuing the first packet to an HFSC class, hfsc_enqueue() calls the
child qdisc's peek() operation before incrementing sch->q.qlen and
sch->qstats.backlog. If the child qdisc uses qdisc_peek_dequeued(), this may
trigger an immediate dequeue and potential packet drop. In such cases,
qdisc_tree_reduce_backlog() is called, but the HFSC qdisc's qlen and backlog
have not yet been updated, leading to inconsistent queue accounting. This
can leave an empty HFSC class in the active list, causing further
consequences like use-after-free.
This patch fixes the bug by moving the increment of sch->q.qlen and
sch->qstats.backlog before the call to the child qdisc's peek() operation.
This ensures that queue length and backlog are always accurate when packet
drops or dequeues are triggered during the peek.
Fixes: 12d0ad3be9c3 ("net/sched/sch_hfsc.c: handle corner cases where head may change invalidating calculated deadline")
Reported-by: Mingi Cho <mincho@theori.io>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250518222038.58538-2-xiyou.wangcong@gmail.com
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Tariq Toukan says:
====================
net/mlx5: HWS, set of fixes and adjustments
This patch series by Yevgeny and Vlad introduces a set of steering fixes
and adjustments.
====================
Link: https://patch.msgid.link/1747766802-958178-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Having adjacent accelerated modify header actions (so-called
pattern-argument actions) may result in inconsistent outcome.
These inconsistencies can take the form of writes to the same
field or a read coupled with a write to the same field. The
solution is to detect such dependencies and insert nops between
the offending actions.
The existing implementation had a few issues, which pretty much
required a complete rewrite of the code that handles these
dependencies.
In the new implementation we're doing the following:
* Checking any two adjacent actions for conflicts (not just
odd-even pairs).
* Marking 'set' and 'add' action fields as destination, rather
than source, for the purposes of checking for conflicts.
* Checking all types of actions ('add', 'set', 'copy') for
dependencies.
* Managing offsets of the args in the buffer - copy the action
args to the right place in the buffer.
* Checking that after inserting nops we're still within the number
of supported actions - return an error otherwise.
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1747766802-958178-5-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix typo - rename 'nope_locations' to 'nop_locations', which describes
the locations of 'nop' actions. To shorten the lines, this renaming
also required some refactoring.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1747766802-958178-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Hardware steering handles actions differently from firmware, but for
termination rules that use encapsulation the firmware needs to be aware
of the action.
Fix this by registering reformat actions with the firmware the first
time this is needed. To do this, add a third possible owner for an
action, and also a lock to protect against registration of the same
action from different threads.
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1747766802-958178-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The firmware reformat id is a u32 and can't safely be returned as an
int. Because the functions also need a way to signal error, prefer to
return the id as an output parameter and keep the return code only for
success/error.
While we're at it, also extract some duplicate code to fetch the
reformat id from a more generic struct pkt_reformat.
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1747766802-958178-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While tracking an IDPF bug, I found that idpf_vport_splitq_napi_poll()
was not following NAPI rules.
It can indeed return @budget after napi_complete() has been called.
Add two debug conditions in networking core to hopefully catch
this kind of bugs sooner.
IDPF bug will be fixed in a separate patch.
[ 72.441242] repoll requested for device eth1 idpf_vport_splitq_napi_poll [idpf] but napi is not scheduled.
[ 72.446291] list_del corruption. next->prev should be ff31783d93b14040, but was ff31783d93b10080. (next=ff31783d93b10080)
[ 72.446659] kernel BUG at lib/list_debug.c:67!
[ 72.446816] Oops: invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI
[ 72.447031] CPU: 156 UID: 0 PID: 16258 Comm: ip Tainted: G W 6.15.0-dbg-DEV #1944 NONE
[ 72.447340] Tainted: [W]=WARN
[ 72.447702] RIP: 0010:__list_del_entry_valid_or_report (lib/list_debug.c:65)
[ 72.450630] Call Trace:
[ 72.450720] <IRQ>
[ 72.450797] net_rx_action (include/linux/list.h:215 include/linux/list.h:287 net/core/dev.c:7385 net/core/dev.c:7516)
[ 72.450928] ? lock_release (kernel/locking/lockdep.c:?)
[ 72.451059] ? clockevents_program_event (kernel/time/clockevents.c:?)
[ 72.451222] handle_softirqs (kernel/softirq.c:579)
[ 72.451356] ? do_softirq (kernel/softirq.c:480)
[ 72.451480] ? idpf_vc_xn_exec (drivers/net/ethernet/intel/idpf/idpf_virtchnl.c:462) idpf
[ 72.451635] do_softirq (kernel/softirq.c:480)
[ 72.451750] </IRQ>
[ 72.451828] <TASK>
[ 72.451905] __local_bh_enable_ip (kernel/softirq.c:?)
[ 72.452051] idpf_vc_xn_exec (drivers/net/ethernet/intel/idpf/idpf_virtchnl.c:462) idpf
[ 72.452210] idpf_send_delete_queues_msg (drivers/net/ethernet/intel/idpf/idpf_virtchnl.c:2083) idpf
[ 72.452390] idpf_vport_stop (drivers/net/ethernet/intel/idpf/idpf_lib.c:837 drivers/net/ethernet/intel/idpf/idpf_lib.c:868) idpf
[ 72.452541] ? idpf_vport_stop (include/linux/bottom_half.h:? include/linux/netdevice.h:4762 drivers/net/ethernet/intel/idpf/idpf_lib.c:855) idpf
[ 72.452695] idpf_initiate_soft_reset (drivers/net/ethernet/intel/idpf/idpf_lib.c:?) idpf
[ 72.452867] idpf_change_mtu (drivers/net/ethernet/intel/idpf/idpf_lib.c:2189) idpf
[ 72.453015] netif_set_mtu_ext (net/core/dev.c:9437)
[ 72.453157] ? packet_notifier (include/linux/rcupdate.h:331 include/linux/rcupdate.h:841 net/packet/af_packet.c:4240)
[ 72.453292] netif_set_mtu (net/core/dev.c:9515)
[ 72.453416] dev_set_mtu (net/core/dev_api.c:?)
[ 72.453534] bond_change_mtu (drivers/net/bonding/bond_main.c:4833)
[ 72.453666] netif_set_mtu_ext (net/core/dev.c:9437)
[ 72.453803] do_setlink (net/core/rtnetlink.c:3116)
[ 72.453925] ? rtnl_newlink (net/core/rtnetlink.c:3901)
[ 72.454055] ? rtnl_newlink (net/core/rtnetlink.c:3901)
[ 72.454185] ? rtnl_newlink (net/core/rtnetlink.c:3901)
[ 72.454314] ? trace_contention_end (include/trace/events/lock.h:122)
[ 72.454467] ? __mutex_lock (arch/x86/include/asm/preempt.h:85 kernel/locking/mutex.c:611 kernel/locking/mutex.c:746)
[ 72.454597] ? cap_capable (include/trace/events/capability.h:26)
[ 72.454721] ? security_capable (security/security.c:?)
[ 72.454857] rtnl_newlink (net/core/rtnetlink.c:?)
[ 72.454982] ? lock_is_held_type (kernel/locking/lockdep.c:5599 kernel/locking/lockdep.c:5938)
[ 72.455121] ? __lock_acquire (kernel/locking/lockdep.c:?)
[ 72.455256] ? __change_page_attr_set_clr (arch/x86/mm/pat/set_memory.c:685)
[ 72.455438] ? __lock_acquire (kernel/locking/lockdep.c:?)
[ 72.455582] ? rtnetlink_rcv_msg (include/linux/rcupdate.h:331 include/linux/rcupdate.h:841 net/core/rtnetlink.c:6885)
[ 72.455721] ? lock_acquire (kernel/locking/lockdep.c:5866)
[ 72.455848] ? rtnetlink_rcv_msg (include/linux/rcupdate.h:331 include/linux/rcupdate.h:841 net/core/rtnetlink.c:6885)
[ 72.455987] ? lock_release (kernel/locking/lockdep.c:?)
[ 72.456117] ? rcu_read_unlock (include/linux/rcupdate.h:341 include/linux/rcupdate.h:871)
[ 72.456249] ? __pfx_rtnl_newlink (net/core/rtnetlink.c:3956)
[ 72.456388] rtnetlink_rcv_msg (net/core/rtnetlink.c:6955)
[ 72.456526] ? rtnetlink_rcv_msg (include/linux/rcupdate.h:331 include/linux/rcupdate.h:841 net/core/rtnetlink.c:6885)
[ 72.456671] ? lock_acquire (kernel/locking/lockdep.c:5866)
[ 72.456802] ? net_generic (include/linux/rcupdate.h:331 include/linux/rcupdate.h:841 include/net/netns/generic.h:45)
[ 72.456929] ? __pfx_rtnetlink_rcv_msg (net/core/rtnetlink.c:6858)
[ 72.457082] netlink_rcv_skb (net/netlink/af_netlink.c:2534)
[ 72.457212] netlink_unicast (net/netlink/af_netlink.c:1313)
[ 72.457344] netlink_sendmsg (net/netlink/af_netlink.c:1883)
[ 72.457476] __sock_sendmsg (net/socket.c:712)
[ 72.457602] ____sys_sendmsg (net/socket.c:?)
[ 72.457735] ? _copy_from_user (arch/x86/include/asm/uaccess_64.h:126 arch/x86/include/asm/uaccess_64.h:134 arch/x86/include/asm/uaccess_64.h:141 include/linux/uaccess.h:178 lib/usercopy.c:18)
[ 72.457875] ___sys_sendmsg (net/socket.c:2620)
[ 72.458042] ? __call_rcu_common (arch/x86/include/asm/irqflags.h:42 arch/x86/include/asm/irqflags.h:119 arch/x86/include/asm/irqflags.h:159 kernel/rcu/tree.c:3107)
[ 72.458185] ? mntput_no_expire (include/linux/rcupdate.h:331 include/linux/rcupdate.h:841 fs/namespace.c:1457)
[ 72.458324] ? lock_acquire (kernel/locking/lockdep.c:5866)
[ 72.458451] ? mntput_no_expire (include/linux/rcupdate.h:331 include/linux/rcupdate.h:841 fs/namespace.c:1457)
[ 72.458588] ? lock_release (kernel/locking/lockdep.c:?)
[ 72.458718] ? mntput_no_expire (include/linux/rcupdate.h:331 include/linux/rcupdate.h:841 fs/namespace.c:1457)
[ 72.458856] __x64_sys_sendmsg (net/socket.c:2652)
[ 72.458997] ? do_syscall_64 (arch/x86/include/asm/irqflags.h:42 arch/x86/include/asm/irqflags.h:119 include/linux/entry-common.h:198 arch/x86/entry/syscall_64.c:90)
[ 72.459136] do_syscall_64 (arch/x86/entry/syscall_64.c:?)
[ 72.459259] ? exc_page_fault (arch/x86/mm/fault.c:1542)
[ 72.459387] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
[ 72.459555] RIP: 0033:0x7fd15f17cbd0
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250520121908.1805732-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
Cosmin Ratiu
Linus Torvalds
Taehee Yoo
Florian Westphal
Kory Maincent
Johannes Berg
Allan Wang
Shayne Chen
Peter Chiu
Benjamin Lin
Howard Hsu
Michael Lo
Ming Yen Hsieh
Henry Martin
Feng Jiang
Paolo Abeni
Geetha sowjanya
Subbaraya Sundeep
Wang Liang
Suman Ghosh
Cong Wang
Jakub Kicinski
Yevgeny Kliteynik
Vlad Dogaru
Eric Dumazet