aboutsummaryrefslogtreecommitdiffstatshomepage
AgeCommit message (Collapse)AuthorFilesLines
2020-05-14bpf: Allow skb_ancestor_cgroup_id helper in cgroup skbAndrey Ignatov1-0/+2
cgroup skb programs already can use bpf_skb_cgroup_id. Allow bpf_skb_ancestor_cgroup_id as well so that container policies can be implemented for a container that can have sub-cgroups dynamically created, but policies should still be implemented based on cgroup id of container itself not on an id of a sub-cgroup. Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/8874194d6041eba190356453ea9f6071edf5f658.1589486450.git.rdna@fb.com
2020-05-14bpf: Allow sk lookup helpers in cgroup skbAndrey Ignatov1-0/+8
Currently sk lookup helpers are allowed in tc, xdp, sk skb, and cgroup sock_addr programs. But they would be useful in cgroup skb as well so that for example cgroup skb ingress program can lookup a peer socket a packet comes from on same host and make a decision whether to allow or deny this packet based on the properties of that socket, e.g. cgroup that peer socket belongs to. Allow the following sk lookup helpers in cgroup skb: * bpf_sk_lookup_tcp; * bpf_sk_lookup_udp; * bpf_sk_release; * bpf_skc_lookup_tcp. Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/f8c7ee280f1582b586629436d777b6db00597d63.1589486450.git.rdna@fb.com
2020-05-14selftest/bpf: Fix spelling mistake "SIGALARM" -> "SIGALRM"Colin Ian King1-1/+1
There is a spelling mistake in an error message, fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200514121529.259668-1-colin.king@canonical.com
2020-05-14bpf: Fix bpf_iter's task iterator logicAndrii Nakryiko1-1/+7
task_seq_get_next might stop prematurely if get_pid_task() fails to get task_struct. Failure to do so doesn't mean that there are no more tasks with higher pids. Procfs's iteration algorithm (see next_tgid in fs/proc/base.c) does a retry in such case. After this fix, instead of stopping prematurely after about 300 tasks on my server, bpf_iter program now returns >4000, which sounds much closer to reality. Fixes: eaaacd23910f ("bpf: Add task and task/file iterator targets") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200514055137.1564581-1-andriin@fb.com
2020-05-14selftests/bpf: Test narrow loads for bpf_sock_addr.user_portAndrey Ignatov1-10/+28
Test 1,2,4-byte loads from bpf_sock_addr.user_port in sock_addr programs. Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/e5c734a58cca4041ab30cb5471e644246f8cdb5a.1589420814.git.rdna@fb.com
2020-05-14bpf: Support narrow loads from bpf_sock_addr.user_portAndrey Ignatov3-10/+9
bpf_sock_addr.user_port supports only 4-byte load and it leads to ugly code in BPF programs, like: volatile __u32 user_port = ctx->user_port; __u16 port = bpf_ntohs(user_port); Since otherwise clang may optimize the load to be 2-byte and it's rejected by verifier. Add support for 1- and 2-byte loads same way as it's supported for other fields in bpf_sock_addr like user_ip4, msg_src_ip4, etc. Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/c1e983f4c17573032601d0b2b1f9d1274f24bc16.1589420814.git.rdna@fb.com
2020-05-14samples/bpf: xdp_redirect_cpu: Set MAX_CPUS according to NR_CPUSLorenzo Bianconi2-14/+17
xdp_redirect_cpu is currently failing in bpf_prog_load_xattr() allocating cpu_map map if CONFIG_NR_CPUS is less than 64 since cpu_map_alloc() requires max_entries to be less than NR_CPUS. Set cpu_map max_entries according to NR_CPUS in xdp_redirect_cpu_kern.c and get currently running cpus in xdp_redirect_cpu_user.c Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/374472755001c260158c4e4b22f193bdd3c56fb7.1589300442.git.lorenzo@kernel.org
2020-05-14MAINTAINERS: Mark networking drivers as Maintained.David S. Miller1-1/+1
Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14r8169: don't include linux/moduleparam.hHeiner Kallweit1-1/+0
93882c6f210a ("r8169: switch from netif_xxx message functions to netdev_xxx") removed the last module parameter from the driver, therefore there's no need any longer to include linux/moduleparam.h. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14r8169: remove not needed checks in rtl8169_set_eeeHeiner Kallweit1-6/+0
After 9de5d235b60a ("net: phy: fix aneg restart in phy_ethtool_set_eee") we don't need the check for aneg being enabled any longer, and as discussed with Russell configuring the EEE advertisement should be supported even if we're in a half-duplex mode currently. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: dsa: felix: fix incorrect clamp calculation for burstColin Ian King1-1/+1
Currently burst is clamping on rate and not burst, the assignment of burst from the clamping discards the previous assignment of burst. This looks like a cut-n-paste error from the previous clamping calculation on ramp. Fix this by replacing ramp with burst. Addresses-Coverity: ("Unused value") Fixes: 0fbabf875d18 ("net: dsa: felix: add support Credit Based Shaper(CBS) for hardware offload") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14ipmr: Add lockdep expression to ipmr_for_each_table macroAmol Grover1-3/+4
During the initialization process, ipmr_new_table() is called to create new tables which in turn calls ipmr_get_table() which traverses net->ipv4.mr_tables without holding the writer lock. However, this is safe to do so as no tables exist at this time. Hence add a suitable lockdep expression to silence the following false-positive warning: ============================= WARNING: suspicious RCU usage 5.7.0-rc3-next-20200428-syzkaller #0 Not tainted ----------------------------- net/ipv4/ipmr.c:136 RCU-list traversed in non-reader section!! ipmr_get_table+0x130/0x160 net/ipv4/ipmr.c:136 ipmr_new_table net/ipv4/ipmr.c:403 [inline] ipmr_rules_init net/ipv4/ipmr.c:248 [inline] ipmr_net_init+0x133/0x430 net/ipv4/ipmr.c:3089 Fixes: f0ad0860d01e ("ipv4: ipmr: support multiple tables") Reported-by: syzbot+1519f497f2f9f08183c6@syzkaller.appspotmail.com Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Amol Grover <frextrite@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14ipmr: Fix RCU list debugging warningAmol Grover1-1/+2
ipmr_for_each_table() macro uses list_for_each_entry_rcu() for traversing outside of an RCU read side critical section but under the protection of rtnl_mutex. Hence, add the corresponding lockdep expression to silence the following false-positive warning at boot: [ 4.319347] ============================= [ 4.319349] WARNING: suspicious RCU usage [ 4.319351] 5.5.4-stable #17 Tainted: G E [ 4.319352] ----------------------------- [ 4.319354] net/ipv4/ipmr.c:1757 RCU-list traversed in non-reader section!! Fixes: f0ad0860d01e ("ipv4: ipmr: support multiple tables") Signed-off-by: Amol Grover <frextrite@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: phy: mdio-moxart: remove unneeded includeBartosz Golaszewski1-1/+0
mdio-moxart doesn't use regulators in the driver code. We can remove the regulator include. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14dt-bindings: dp83867: Convert DP83867 to yamlDan Murphy2-68/+127
Convert the dp83867 binding to yaml. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14dt-bindings: net: dp83869: Update licensing infoDan Murphy1-1/+1
Add BSD 2 Clause to the licensing. CC: Rob Herring <robh@kernel.org> Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14drivers: net: hamradio: Fix suspicious RCU usage warning in bpqether.cMadhuparna Bhowmik1-1/+2
This patch fixes the following warning: ============================= WARNING: suspicious RCU usage 5.7.0-rc5-next-20200514-syzkaller #0 Not tainted ----------------------------- drivers/net/hamradio/bpqether.c:149 RCU-list traversed in non-reader section!! Since rtnl lock is held, pass this cond in list_for_each_entry_rcu(). Reported-by: syzbot+bb82cafc737c002d11ca@syzkaller.appspotmail.com Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: phy: broadcom: fix BCM54XX_SHD_SCR3_TRDDAPD value for BCM54810Kevin Lo2-2/+7
Set the correct bit when checking for PHY_BRCM_DIS_TXCRXC_NOENRGY on the BCM54810 PHY. Fixes: 0ececcfc9267 ("net: phy: broadcom: Allow BCM54810 to use bcm54xx_adjust_rxrefclk()") Signed-off-by: Kevin Lo <kevlo@kevlo.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14hinic: update huawei ethernet driver maintainerLuo bin1-1/+1
update huawei ethernet driver maintainer from aviad to Bin luo Signed-off-by: Luo bin <luobin9@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14hinic: add set_ringparam ethtool_ops supportLuo bin11-15/+104
support to change TX/RX queue depth with ethtool -G Signed-off-by: Luo bin <luobin9@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14devlink: refactor end checks in devlink_nl_cmd_region_read_dumpitJakub Kicinski2-25/+31
Clean up after recent fixes, move address calculations around and change the variable init, so that we can have just one start_offset == end_offset check. Make the check a little stricter to preserve the -EINVAL error if requested start offset is larger than the region itself. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14Merge branch 'am65-cpsw-add-taprio-EST-offload-support'David S. Miller9-3/+761
Murali Karicheri says: ==================== am65-cpsw: add taprio/EST offload support AM65 CPSW h/w supports Enhanced Scheduled Traffic (EST – defined in P802.1Qbv/D2.2 that later got included in IEEE 802.1Q-2018) configuration. EST allows express queue traffic to be scheduled (placed) on the wire at specific repeatable time intervals. In Linux kernel, EST configuration is done through tc command and the taprio scheduler in the net core implements a software only scheduler (SCH_TAPRIO). If the NIC is capable of EST configuration, user indicate "flag 2" in the command which is then parsed by taprio scheduler in net core and indicate that the command is to be offloaded to h/w. taprio then offloads the command to the driver by calling ndo_setup_tc() ndo ops. This patch implements ndo_setup_tc() as well as other changes required to offload EST configuration to CPSW h/w For more details please refer patch 2/2. This series is based on original work done by Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> to add taprio offload support to AM65 CPSW 2G. 1. Example configuration 3 Gates ifconfig eth0 down ethtool -L eth0 tx 3 ethtool --set-priv-flags eth0 p0-rx-ptype-rrobin off ifconfig eth0 192.168.2.20 tc qdisc replace dev eth0 parent root handle 100 taprio \ num_tc 3 \ map 0 0 1 2 0 0 0 0 0 0 0 0 0 0 0 0 \ queues 1@0 1@1 1@2 \ base-time 0000 \ sched-entry S 4 125000 \ sched-entry S 2 125000 \ sched-entry S 1 250000 \ flags 2 2. Example configuration 8 Gates ifconfig eth0 down ethtool -L eth0 tx 8 ethtool --set-priv-flags eth0 p0-rx-ptype-rrobin off ifconfig eth0 192.168.2.20 tc qdisc replace dev eth0 parent root handle 100 taprio \ num_tc 8 \ map 0 1 2 3 4 5 6 7 0 0 0 0 0 0 0 0 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ base-time 0000 \ sched-entry S 80 125000 \ sched-entry S 40 125000 \ sched-entry S 20 125000 \ sched-entry S 10 125000 \ sched-entry S 08 125000 \ sched-entry S 04 125000 \ sched-entry S 02 125000 \ sched-entry S 01 125000 \ flags 2 Classify frames to particular priority using skbedit so that they land at a specific queue in cpsw h/w which is Gated by the EST gate which opens based on the sched-entry. tc qdisc add dev eth0 clsact In the below for example an iperf3 session with destination port 5007 will go through Q7. tc filter add dev eth0 egress protocol ip prio 1 u32 match ip dport 5007 0xffff action skbedit priority 7 tc filter add dev eth0 egress protocol ip prio 1 u32 match ip dport 5006 0xffff action skbedit priority 6 tc filter add dev eth0 egress protocol ip prio 1 u32 match ip dport 5005 0xffff action skbedit priority 5 tc filter add dev eth0 egress protocol ip prio 1 u32 match ip dport 5004 0xffff action skbedit priority 4 tc filter add dev eth0 egress protocol ip prio 1 u32 match ip dport 5003 0xffff action skbedit priority 3 tc filter add dev eth0 egress protocol ip prio 1 u32 match ip dport 5002 0xffff action skbedit priority 2 tc filter add dev eth0 egress protocol ip prio 1 u32 match ip dport 5001 0xffff action skbedit priority 1 iperf3 -c 192.168.2.10 -u -l1470 -b32M -t1 -p 5007 Testing was done by capturing frames at the PC using wireshark and checking for the bust interval or cycle time of UDP frames with a specific port number. Verified that the distance between first frame of a burst (cycle-time) is 1 milli second and burst duration is within 125 usec based on the received packet timestamp shown in wireshark packet display. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14ethernet: ti: am65-cpsw-qos: add TAPRIO offload supportIvan Khoronzhuk7-3/+689
AM65 CPSW h/w supports Enhanced Scheduled Traffic (EST – defined in P802.1Qbv/D2.2 that later got included in IEEE 802.1Q-2018) configuration. EST allows express queue traffic to be scheduled (placed) on the wire at specific repeatable time intervals. In Linux kernel, EST configuration is done through tc command and the taprio scheduler in the net core implements a software only scheduler (SCH_TAPRIO). If the NIC is capable of EST configuration, user indicate "flag 2" in the command which is then parsed by taprio scheduler in net core and indicate that the command is to be offloaded to h/w. taprio then offloads the command to the driver by calling ndo_setup_tc() ndo ops. This patch implements ndo_setup_tc() to offload EST configuration to CPSW h/w. Currently driver supports only SetGateStates operation. EST operates on a repeating time interval generated by the CPTS EST function generator. Each Ethernet port has a global EST fetch RAM that can be configured as 2 buffers, each of 64 locations or one large buffer of 128 locations. In 2 buffer configuration, a ping pong mechanism is used to hold the active schedule (oper) in one buffer and new (admin) command in the other. Each 22-bit fetch command consists of a 14-bit fetch count (14 MSB’s) and an 8-bit priority fetch allow (8 LSB’s) that will be applied for the fetch count time in wireside clocks. Driver process each of the sched-entry in the offload command and update the fetch RAM. Driver configures duration in sched-entry into the fetch count and Gate mask into the priority fetch bits of the RAM. Then configures the CPTS EST function generator to activate the schedule. Currently driver supports only 2 buffer configuration which means driver supports a max cycle time of ~8 msec. CPSW supports a configurable number of priority queues (up to 8) and needs to be switched to this mode from the default round robin mode before EST can be offloaded. User configures these through ethtool commands (-L for changing number of queues and --set-priv-flags to disable round robin mode). Driver doesn't enable EST if pf_p0_rx_ptype_rrobin privat flag is set. The flag is common for all ports, and so can't be just overridden by taprio configuration w/o user involvement. Command fails if pf_p0_rx_ptype_rrobin is already set in the driver. Scheds (commands) configuration depends on interface speed so driver translates the duration to the fetch count based on link speed. Each schedule can be constructed with several command entries in fetch RAM depending on interval. For example if each sched has timer interval < ~130us on 1000 Mb link then each sched consumes one command and have 1:1 mapping. When Ethernet link goes down, driver purge the configuration if link is down for more than 1 second. The patch allows to update the timer and scheds memory only if it's really needed, and skip cases required the user to stop timer by configuring only shceds memory. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14ethernet: ti: am65-cpts: add routines to support taprio offloadIvan Khoronzhuk2-0/+72
TAPRIO/EST offload support in CPSW2G requires EST scheduler function enabled in CPTS. So this patch add a function to set cycle time for EST scheduler. It also add a function for getting time in ns of PHC clock for taprio qdisc configuration. Mostly to verify if timer update is needed or to get actual state of oper/admin schedule. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14tcp: fix error recovery in tcp_zerocopy_receive()Eric Dumazet1-3/+4
If user provides wrong virtual address in TCP_ZEROCOPY_RECEIVE operation we want to return -EINVAL error. But depending on zc->recv_skip_hint content, we might return -EIO error if the socket has SOCK_DONE set. Make sure to return -EINVAL in this case. BUG: KMSAN: uninit-value in tcp_zerocopy_receive net/ipv4/tcp.c:1833 [inline] BUG: KMSAN: uninit-value in do_tcp_getsockopt+0x4494/0x6320 net/ipv4/tcp.c:3685 CPU: 1 PID: 625 Comm: syz-executor.0 Not tainted 5.7.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 tcp_zerocopy_receive net/ipv4/tcp.c:1833 [inline] do_tcp_getsockopt+0x4494/0x6320 net/ipv4/tcp.c:3685 tcp_getsockopt+0xf8/0x1f0 net/ipv4/tcp.c:3728 sock_common_getsockopt+0x13f/0x180 net/core/sock.c:3131 __sys_getsockopt+0x533/0x7b0 net/socket.c:2177 __do_sys_getsockopt net/socket.c:2192 [inline] __se_sys_getsockopt+0xe1/0x100 net/socket.c:2189 __x64_sys_getsockopt+0x62/0x80 net/socket.c:2189 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:297 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45c829 Code: 0d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f1deeb72c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000037 RAX: ffffffffffffffda RBX: 00000000004e01e0 RCX: 000000000045c829 RDX: 0000000000000023 RSI: 0000000000000006 RDI: 0000000000000009 RBP: 000000000078bf00 R08: 0000000020000200 R09: 0000000000000000 R10: 00000000200001c0 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000001d8 R14: 00000000004d3038 R15: 00007f1deeb736d4 Local variable ----zc@do_tcp_getsockopt created at: do_tcp_getsockopt+0x1a74/0x6320 net/ipv4/tcp.c:3670 do_tcp_getsockopt+0x1a74/0x6320 net/ipv4/tcp.c:3670 Fixes: 05255b823a61 ("tcp: add TCP_ZEROCOPY_RECEIVE support for zerocopy receive") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14Merge branch 'net-qed-qede-critical-hw-error-handling'David S. Miller16-46/+699
Igor Russkikh says: ==================== net: qed/qede: critical hw error handling FastLinQ devices as a complex systems may observe various hardware level error conditions, both severe and recoverable. Driver is able to detect and report this, but so far it only did trace/dmesg based reporting. Here we implement an extended hw error detection, service task handler captures a dump for the later analysis. I also resubmit a patch from Denis Bolotin on tx timeout handler, addressing David's comment regarding recovery procedure as an extra reaction on this event. v2: Removing the patch with ethtool dump and udev magic. Its quite isolated, I'm working on devlink based logic for this separately. v1: https://patchwork.ozlabs.org/project/netdev/cover/cover.1588758463.git.irusskikh@marvell.com/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: qed: fix bad formattingIgor Russkikh1-3/+2
On some adjacent code, fix bad code formatting Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: qed: introduce critical hardware error handlerIgor Russkikh3-1/+153
MCP may signal driver about generic critical failure. Driver has to collect mdump information (get_retain), it pushes that to logs and triggers generic notification on "hardware attention" event. Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: qed: introduce critical fan failure handlerIgor Russkikh2-1/+15
Fan failure is sent by firmware, driver reacts on this error with newly introduced notification path. It will collect dump and shut down the device to prevent physical breakage Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: qede: Implement ndo_tx_timeoutDenis Bolotin2-1/+46
Upon tx timeout detection we do disable carrier and print TX queue info on TX timeout. We then raise hw error condition and trigger service task to handle this. This handler will capture extra debug info and then optionally trigger recovery procedure to try restore function. Signed-off-by: Denis Bolotin <dbolotin@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: qede: optional hw recovery procedureIgor Russkikh1-0/+24
Driver has an ability to initiate a recovery process as a reaction to detected errors. But the codepath (recovery_process) was disabled and never active. Here we add ethtool private flag to allow user have the recovery procedure activated. We still do not enable this by default though, since in some configurations this is not desirable. E.g. this may impact other PFs/VFs. Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: qed: attention clearing propertiesIgor Russkikh6-5/+53
On different hardware events we have to respond differently, on some of hardware indications hw attention (error condition) should be cleared by the driver to continue normal functioning. Here we introduce attention clear flags, and put them on some important events (in aeu_descs). Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: qed: cleanup debug related declarationsIgor Russkikh2-21/+16
Thats probably a legacy code had double declaration of some fields. Cleanup this, removing copy and fixing references. Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: qed: critical err reporting to management firmwareIgor Russkikh4-0/+161
On various critical errors, notification handler should also report the err information into the management firmware. MFW can interact with server/motherboard backend agents - these are used by server manufacturers to monitor server HW health. Thus, it is important for driver to report on any faulty conditions Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: qed: invoke err notify on critical areasIgor Russkikh5-14/+35
In a number of critical places not only debug trace should be printed, but the appropriate hw error condition should be raised and error handling/recovery should start. Introduce our new qed_hw_err_notify invocation in these places to record and indicate critical error conditions in hardware. Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: qede: add hw err scheduled handlerIgor Russkikh2-2/+106
qede (ethernet level driver) registers a callback handler. This handler maintains eth dev state flags/bits to track error processing. It implements in place processing part for nonsleeping context (WARN_ON trigger), and a deferred (delayed work) part which triggers recovery process for recoverable errors. In later patches this atomic handler will come with more meat. We introduce err_flags on ethdevice structure, its being used to record error handling properties. Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: qed: adding hw_err states and handlingIgor Russkikh5-0/+90
Here we introduce qed device error tracking flags and error types. qed_hw_err_notify is an entrace point to report errors. It'll notify higher level drivers (qede/qedr/etc) to handle and recover the error. List of posible errors comes from hardware interfaces, but could be extended in future. Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14Merge tag 'mmc-v5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds5-17/+41
Pull MMC fixes from Ulf Hansson: "MMC core: - Fix a couple of quite severe issues for the CQE request path MMC host: - alcor: Fix a resource leak in the error path for ->probe() - sdhci-acpi: Fix the DMA support for the AMD eMMC v5.0 variant - sdhci-pci-gli: Fix system resume support for GL975x - sdhci-pci-gli: Fix reboot error for GL9750" * tag 'mmc-v5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-acpi: Add SDHCI_QUIRK2_BROKEN_64_BIT_DMA for AMDI0040 mmc: block: Fix request completion in the CQE timeout path mmc: core: Fix recursive locking issue in CQE recovery path mmc: core: Check request type before completing the request mmc: sdhci-pci-gli: Fix can not access GL9750 after reboot from Windows 10 mmc: alcor: Fix a resource leak in the error path for ->probe() mmc: sdhci-pci-gli: Fix no irq handler from suspend
2020-05-14Merge branch 'net-hns3-add-some-cleanups-for-next'David S. Miller6-33/+11
Huazhong Tan says: ==================== net: hns3: add some cleanups for -next This patchset adds some cleanups for the HNS3 ethernet driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: hns3: remove unnecessary frag list checking in hns3_nic_net_xmit()Huazhong Tan1-4/+1
The skb_has_frag_list() in hns3_nic_net_xmit() is redundant, since skb_walk_frags() includes this checking implicitly. Reported-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: hns3: remove some unused macrosHuazhong Tan1-17/+0
There are some macros defined in hns3_enet.h, but not used in anywhere. Reported-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: hns3: modify an incorrect error log in hclge_mbx_handler()Huazhong Tan1-1/+1
When handling HCLGE_MBX_GET_LINK_STATUS, PF will return the link status to the VF, so the error log of hclge_get_link_info() is incorrect. Reported-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: hns3: remove a duplicated printing in hclge_configure()Huazhong Tan1-3/+1
Since hclge_get_cfg() already has error print, so hclge_configure() should not print error when calling hclge_get_cfg() fail. Reported-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: hns3: modify some incorrect spellingHuazhong Tan2-8/+8
This patch modifies some incorrect spelling. Reported-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14r8152: Use MAC address from device tree if availableThierry Reding1-9/+13
If a MAC address was passed via the device tree node for the r8152 device, use it and fall back to reading from EEPROM otherwise. This is useful for devices where the r8152 EEPROM was not programmed with a valid MAC address, or if users want to explicitly set a MAC address in the bootloader and pass that to the kernel. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller6-9/+40
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Fix gcc-10 compilation warning in nf_conntrack, from Arnd Bergmann. 2) Add NF_FLOW_HW_PENDING to avoid races between stats and deletion commands, from Paul Blakey. 3) Remove WQ_MEM_RECLAIM from the offload workqueue, from Roi Dayan. 4) Infinite loop when removing nf_conntrack module, from Florian Westphal. 5) Set NF_FLOW_TEARDOWN bit on expiration to avoid races when refreshing the timeout from the software path. 6) Missing nft_set_elem_expired() check in the rbtree, from Phil Sutter. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14MAINTAINERS: Add Jakub to networking drivers.David S. Miller1-0/+1
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14MAINTAINERS: another add of Karsten Graul for S390 networkingUrsula Braun1-0/+1
Complete adding of Karsten as maintainer for all S390 networking parts in the kernel. Cc: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14drivers: ipa: fix typos for ipa_smp2p structure docWang Wenhu1-1/+1
Remove the duplicate "mutex", and change "Motex" to "Mutex". Also I recommend it's easier for understanding to make the "ready-interrupt" a bundle for it is a parallel description as "shutdown" which is appended after the slash. Signed-off-by: Wang Wenhu <wenhu.wang@vivo.com> Cc: Alex Elder <elder@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14pppoe: only process PADT targeted at local interfacesGuillaume Nault1-0/+3
We don't want to disconnect a session because of a stray PADT arriving while the interface is in promiscuous mode. Furthermore, multicast and broadcast packets make no sense here, so only PACKET_HOST is accepted. Reported-by: David Balažic <xerces9@gmail.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.