| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Phylink will already limit the MAC speed according to the interface,
so if 2500BASE-X is selected, the maximum speed will be 2.5G.
Similarly, if SGMII is selected, the maximum speed will be 1G.
It is, therefore, not necessary to set a speed limit. Remove setting
plat_dat->max_speed from this glue driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1u4dIh-000dT5-Kt@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, bnxt_en driver satisfies the requirements of the Device
memory TCP, which is HDS.
So, it implements rx-side Device memory TCP for bnxt_en driver.
It requires only converting the page API to netmem API.
`struct page` of agg rings are changed to `netmem_ref netmem` and
corresponding functions are changed to a variant of netmem API.
It also passes PP_FLAG_ALLOW_UNREADABLE_NETMEM flag to a parameter of
page_pool.
The netmem will be activated only when a user requests devmem TCP.
When netmem is activated, received data is unreadable and netmem is
disabled, received data is readable.
But drivers don't need to handle both cases because netmem core API will
handle it properly.
So, using proper netmem API is enough for drivers.
Device memory TCP can be tested with
tools/testing/selftests/drivers/net/hw/ncdevmem.
This is tested with BCM57504-N425G and firmware version 232.0.155.8/pkg
232.1.132.8.
Reviewed-by: Mina Almasry <almasrymina@google.com>
Tested-by: David Wei <dw@davidwei.uk>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250415052458.1260575-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver allocates ring elements using GFP_DMA flags. There is
no dependency from LAN743x hardware on memory allocation should be
in DMA_ZONE. Hence modifying the flags to use only GFP_ATOMIC. This
is consistent with other callers of lan743x_rx_init_ring_element().
Reported-by: Zhang, Liyin(CN) <Liyin.Zhang.CN@windriver.com>
Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250415044509.6695-1-thangaraj.s@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Michael Walle says:
====================
net: ethernet: ti: am65-cpsw: Fix MAC address fetching
MAC addresses can be fetched from a NVMEM device. of_get_mac_address()
will return EPROBE_DEFER if that device is not available yet. That
isn't handled correctly by the driver and it will always fall back
to either a random MAC address or it's own "fetch by fuse" method.
Also, if the ethernet (sub)node has a link to the nvmem device,
it will fail to create a device link as the fwnode parameter isn't
populated. That's fixed in the first patch.
====================
Link: https://patch.msgid.link/20250414084336.4017237-1-mwalle@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
of_get_mac_address() might fetch the MAC address from NVMEM and that
driver might not have been loaded. In that case, -EPROBE_DEFER is
returned. Right now, this will trigger an immediate fallback to
am65_cpsw_am654_get_efuse_macid() possibly resulting in a random MAC
address although the MAC address is stored in the referenced NVMEM.
Fix it by handling the -EPROBE_DEFER return code correctly. This also
means that the creation of the MDIO device has to be moved to a later
stage as -EPROBE_DEFER must not be returned after child devices are
created.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250414084336.4017237-3-mwalle@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
fwnode needs to be set for a device for fw_devlink to be able to
track/enforce its dependencies correctly. Without this, you'll see error
messages like this when the supplier has probed and tries to make sure
all its fwnode consumers are linked to it using device links:
am65-cpsw-nuss 8000000.ethernet: Failed to create device link (0x180) with supplier ..
Reviewed-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Link: https://patch.msgid.link/20250414084336.4017237-2-mwalle@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jacob Keller says:
====================
net: ptp: driver opt-in for supported PTP ioctl flags
Both the PTP_EXTTS_REQUEST(2) and PTP_PEROUT_REQUEST(2) ioctls take flags
from userspace to modify their behavior. Drivers are supposed to check
these flags, rejecting requests for flags they do not support.
Many drivers today do not check these flags, despite many attempts to
squash individual drivers as these mistakes are discovered. Additionally,
any new flags added can require updating every driver if their validation
checks are poorly implemented.
It is clear that driver authors will not reliably check for unsupported
flags. The root of the issue is that drivers must essentially opt out of
every flag, rather than opt in to the ones they support.
Instead, lets introduce .supported_perout_flags and .supported_extts_flags
to the ptp_clock_info structure. This is a pattern taken from several
ethtool ioctls which enabled validation to move out of the drivers and into
the shared ioctl handlers. This pattern has worked quite well and makes it
much more difficult for drivers to accidentally accept flags they do not
support.
With this approach, drivers which do not set the supported fields will have
the core automatically reject any request which has flags. Drivers must opt
in to each flag they support by adding it to the list, with the sole
exception being the PTP_ENABLE_FEATURE flag of the PTP_EXTTS_REQUEST ioctl
since it is entirely handled by the ptp_chardev.c file.
This change will ensure that all current and future drivers are safe for
extension when we need to extend these ioctls.
I opted to keep all the driver changes into one patch per ioctl type. The
changes are relatively small and straight forward. Splitting it per-driver
would make the series large, and also break flags between the introduction
of the supported field and setting it in each driver.
The non-Intel drivers are compile-tested only, and I would appreciate
confirmation and testing from their respective maintainers. (It is also
likely that I missed some of the driver authors especially for drivers
which didn't make any checks at all and do not set either of the supported
flags yet)
v1: https://lore.kernel.org/20250408-jk-supported-perout-flags-v1-0-d2f8e3df64f3@intel.com
====================
Link: https://patch.msgid.link/20250414-jk-supported-perout-flags-v2-0-f6b17d15475c@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The PTP_PEROUT_REQUEST2 ioctl has gained support for flags specifying
specific output behavior including PTP_PEROUT_ONE_SHOT,
PTP_PEROUT_DUTY_CYCLE, PTP_PEROUT_PHASE.
Driver authors are notorious for not checking the flags of the request.
This results in misinterpreting the request, generating an output signal
that does not match the requested value. It is anticipated that even more
flags will be added in the future, resulting in even more broken requests.
Expecting these issues to be caught during review or playing whack-a-mole
after the fact is not a great solution.
Instead, introduce the supported_perout_flags field in the ptp_clock_info
structure. Update the core character device logic to explicitly reject any
request which has a flag not on this list.
This ensures that drivers must 'opt in' to the flags they support. Drivers
which don't set the .supported_perout_flags field will not need to check
that unsupported flags aren't passed, as the core takes care of this.
Update the drivers which do support flags to set this new field.
Note the following driver files set n_per_out to a non-zero value but did
not check the flags at all:
• drivers/ptp/ptp_clockmatrix.c
• drivers/ptp/ptp_idt82p33.c
• drivers/ptp/ptp_fc3.c
• drivers/net/ethernet/ti/am65-cpts.c
• drivers/net/ethernet/aquantia/atlantic/aq_ptp.c
• drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c
• drivers/net/dsa/sja1105/sja1105_ptp.c
• drivers/net/ethernet/freescale/dpaa2/dpaa2-ptp.c
• drivers/net/ethernet/mscc/ocelot_vsc7514.c
• drivers/net/ethernet/intel/i40e/i40e_ptp.c
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250414-jk-supported-perout-flags-v2-2-f6b17d15475c@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The PTP_EXTTS_REQUEST(2) ioctl has a flags field which specifies how the
external timestamp request should behave. This includes which edge of the
signal to timestamp, as well as a specialized "offset" mode. It is expected
that more flags will be added in the future.
Driver authors routinely do not check the flags, often accepting requests
with flags which they do not support. Even drivers which do check flags may
not be future-proofed to reject flags not yet defined. Thus, any future
flag additions often require manually updating drivers to reject these
flags.
This approach of hoping we catch flag checks during review, or playing
whack-a-mole after the fact is the wrong approach.
Introduce the "supported_extts_flags" field to the ptp_clock_info
structure. This field defines the set of flags the device actually
supports.
Update the core character device logic to check this field and reject
unsupported requests. Getting this right is somewhat tricky. First, to
avoid unnecessary repetition and make basic functionality work when
.supported_extts_flags is 0, the core always accepts the PTP_ENABLE_FEATURE
flag. This flag is used to set the 'on' parameter to the .enable function
and is thus always 'supported' by all drivers.
For backwards compatibility, the PTP_RISING_EDGE and PTP_FALLING_EDGE flags
are merely "hints" when using the old PTP_EXTTS_REQUEST ioctl, and are not
expected to be enforced. If the user issues PTP_EXTTS_REQUEST2, the
PTP_STRICT_FLAGS flag is added which is supposed to inform the driver to
strictly validate the flags and reject unsupported requests. To handle
this, first check if the driver reports PTP_STRICT_FLAGS support. If it
does not, then always allow the PTP_RISING_EDGE and PTP_FALLING_EDGE flags.
This keeps backwards compatibility with the original PTP_EXTTS_REQUEST
ioctl where these flags are not guaranteed to be honored.
This way, drivers which do not set the supported_extts_flags will continue
to accept requests for the original PTP_EXTTS_REQUEST ioctl. The core will
automatically reject requests with new flags, and correctly reject requests
with PTP_STRICT_FLAGS, where the driver is supposed to strictly validate
the flags.
Update the various drivers, refactoring their validation logic into the
.supported_extts_flags field. For consistency and readability,
PTP_ENABLE_FEATURE is not set in the supported flags list, and
PTP_EXTTS_EDGES is expanded to PTP_RISING_EDGE | PTP_FALLING_EDGE in all
cases.
Note the following driver files set n_ext_ts to a non-zero value but did
not check flags at all:
• drivers/net/ethernet/freescale/dpaa2/dpaa2-ptp.c
• drivers/net/ethernet/freescale/enetc/enetc_ptp.c
• drivers/net/ethernet/intel/i40e/i40e_ptp.c
• drivers/net/ethernet/marvell/octeontx2/nic/otx2_ptp.c
• drivers/net/ethernet/renesas/ravb_ptp.c
• drivers/net/ethernet/renesas/rtsn.c
• drivers/net/ethernet/renesas/rtsn.h
• drivers/net/ethernet/ti/am65-cpts.c
• drivers/net/ethernet/ti/cpts.h
• drivers/net/ethernet/ti/icssg/icss_iep.c
• drivers/net/ethernet/xscale/ptp_ixp46x.c
• drivers/net/phy/bcm-phy-ptp.c
• drivers/ptp/ptp_ocp.c
• drivers/ptp/ptp_pch.c
• drivers/ptp/ptp_qoriq.c
These drivers behavior does change slightly: they will now reject the
PTP_EXTTS_REQUEST2 ioctl, because they do not strictly validate their
flags. This also makes them no longer incorrectly accept PTP_EXT_OFFSET.
Also note that the renesas ravb driver does not support PTP_STRICT_FLAGS.
We could leave the .supported_extts_flags as 0, but I added the
PTP_RISING_EDGE | PTP_FALLING_EDGE since the driver previously manually
validated these flags. This is equivalent to 0 because the core will allow
these flags regardless unless PTP_STRICT_FLAGS is also set.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250414-jk-supported-perout-flags-v2-1-f6b17d15475c@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If multicast snooping is enabled, multicast packets may not always end up
on the local bridge interface, if the host is not a member of the multicast
group. Similar to how IFF_PROMISC allows all packets to be received
locally, let IFF_ALLMULTI allow all multicast packets to be received.
OpenWrt uses a user space daemon for DHCPv6/RA/NDP handling, and in relay
mode it sets the ALLMULTI flag in order to receive all relevant queries on
the network.
This works for normal network interfaces and non-snooping bridges, but not
snooping bridges (unless multicast routing is enabled).
Reported-by: Felix Fietkau <nbd@nbd.name>
Closes: https://github.com/openwrt/openwrt/issues/15857#issuecomment-2662851243
Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/OSZPR01MB8434308370ACAFA90A22980798B32@OSZPR01MB8434.jpnprd01.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
drivers/net/phy/Kconfig is included from drivers/net/Kconfig in an
"if NETDEVICES" section. Therefore we don't have to duplicate the
dependency here. And if e.g. PHYLINK is selected somewhere, then the
dependency is ignored anyway (see note in Kconfig help).
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/085892cd-aa11-4c22-bf8a-574a5c6dcd7c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While developing the fix for the buffer sizing issue in [0], I noticed
that the kernel will happily accept a long list of actions for a filter,
and then just silently truncate that list down to a maximum of 32
actions.
That seems less than ideal, so this patch changes the action parsing to
return an error message and refuse to create the filter in this case.
This results in an error like:
# ip link add type veth
# tc qdisc replace dev veth0 root handle 1: fq_codel
# tc -echo filter add dev veth0 parent 1: u32 match u32 0 0 $(for i in $(seq 33); do echo action pedit munge ip dport set 22; done)
Error: Only 32 actions supported per filter.
We have an error talking to the kernel
Instead of just creating a filter with 32 actions and dropping the last
one.
This is obviously a change in UAPI. But seeing as creating more than 32
filters has never actually *worked*, it seems that returning an explicit
error is better, and any use cases that get broken by this were already
broken just in more subtle ways.
[0] https://lore.kernel.org/r/20250407105542.16601-1-toke@redhat.com
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20250409145523.164506-1-toke@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
commit cb7dd712189f ("octeon_ep_vf: Add driver framework and device
initialization") added octep_vf_wq but it has never been used. Remove it.
Reported-by: Dr. David Alan Gilbert <linux@treblig.org>
Closes: https://lore.kernel.org/netdev/Z70bEoTKyeBau52q@gallifrey/
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250414-octeon-wq-v1-1-23700e4bd208@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Russell King says:
====================
net: stmmac: ingenic: cleanups
Another series for another stmmac glue platform.
Convert Ingenic to use the stmmac platform PM ops and the
devm_stmmac_pltfr_probe() helper.
====================
Link: https://patch.msgid.link/Z_0u9pA0Ziop-BuU@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As Ingenic now uses the stmmac platform PM ops, convert it to use
devm_stmmac_pltfr_probe() which will call the plat_dat->init() method
before stmmac_drv_probe() and appropriately cleaning up via the
->exit() method, thus simplifying the code. Using the devm_*()
variant also allows removal of the explicit call to
stmmac_pltfr_remove().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1u4M5S-000YGJ-9K@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert the Ingenic glue driver to use the generic stmmac platform
power management operations.
In order to do this, we need to make ingenic_mac_init() arguments
compatible with plat_dat->init() by adding a plat_dat member to struct
ingenic_mac. This allows the custom suspend/resume operations to be
removed, and the PM ops pointer replaced with stmmac_pltfr_pm_ops.
This will adds runtime PM and noirq suspend/resume ops to this driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1u4M5N-000YGD-5i@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Using stmmac_pltfr_probe() simplifies the probe function. This will not
only call plat_dat->init (imx_dwmac_init), but also plat_dat->exit
(imx_dwmac_exit) appropriately if stmmac_dvr_probe() fails. This
results in an overall simplification of the glue driver.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1u4Flp-000XlM-Tb@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Russell King says:
====================
net: stmmac: anarion: cleanups
A series of cleanups to the anarion glue driver.
Clean up anarion_config_dt() error handling, printing a human readable
error rather than the numeric errno, and use ERR_CAST().
Using a switch statement with incorrect "fallthrough;" for RGMII vs
non-RGMII is unnecessary when we have phy_interface_mode_is_rgmii().
Convert to use the helper.
Use stmmac_pltfr_probe() rahter than open-coding the call to the
init function (which stmmac_pltfr_probe() will do for us.)
Finally, convert to use devm_stmmac_pltfr_probe() which allows the
removal of the .remove initialiser in the driver structure.
Not tested on hardware.
====================
Link: https://patch.msgid.link/Z_zP9BvZlqeq3Ssl@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert anarion to use devm_stmmac_pltfr_probe() which allows the
removal of an explicit call to stmmac_pltfr_remove().
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1u4Flf-000XjS-Fi@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rather than open-coding the call to anarion_gmac_init() and then
stmmac_dvr_probe(), omitting the cleanup of calling
anarion_gmac_exit(), use stmmac_pltfr_probe() which will handle this
for us.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1u4Fla-000XjM-Bw@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
anarion_config_dt() used a switch statement to check for the RGMII
modes, complete with an unnecessary "fallthrough", and also printed
the numerical value of the PHY interface mode on error. Clean this
up using the phy_interface_mode_is_rgmii() helper, and print the
English version of the PHY interface mode on error.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1u4FlV-000XjG-83@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When enabled, print a user friendly description of the error when
failing to ioremap() the control resource, and use ERR_CAST() when
propagating the error. This allows us to get rid of the "err" local
variable in anarion_config_dt().
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1u4FlQ-000XjA-2V@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Breno Leitao says:
====================
net: Introduce nlmsg_payload helper
In the current codebase, there are multiple instances where the
structure size is checked before assigning it to a Netlink message. This
check is crucial for ensuring that the structure is correctly mapped
onto the Netlink message, providing a layer of security.
To streamline this process, Jakub Kicinski suggested creating a helper
function, `nlmsg_payload`, which verifies if the structure fits within
the message. If it does, the function returns the data; otherwise, it
returns NULL. This approach simplifies the code and reduces redundancy.
This patchset introduces the `nlmsg_payload` helper and updates several
parts of the code to use it. Further updates will follow in subsequent
patchsets.
v1: https://lore.kernel.org/20250411-nlmsg-v1-0-ddd4e065cb15@debian.org
====================
Link: https://patch.msgid.link/20250414-nlmsg-v2-0-3d90cb42c6af@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Leverage the new nlmsg_payload() helper to avoid checking for message
size and then reading the nlmsg data.
Suggested-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250414-nlmsg-v2-10-3d90cb42c6af@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Leverage the new nlmsg_payload() helper to avoid checking for message
size and then reading the nlmsg data.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250414-nlmsg-v2-9-3d90cb42c6af@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Leverage the new nlmsg_payload() helper to avoid checking for message
size and then reading the nlmsg data.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250414-nlmsg-v2-8-3d90cb42c6af@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Leverage the new nlmsg_payload() helper to avoid checking for message
size and then reading the nlmsg data.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250414-nlmsg-v2-7-3d90cb42c6af@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Leverage the new nlmsg_payload() helper to avoid checking for message
size and then reading the nlmsg data.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250414-nlmsg-v2-6-3d90cb42c6af@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Leverage the new nlmsg_payload() helper to avoid checking for message
size and then reading the nlmsg data.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250414-nlmsg-v2-5-3d90cb42c6af@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Leverage the new nlmsg_payload() helper to avoid checking for message
size and then reading the nlmsg data.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250414-nlmsg-v2-4-3d90cb42c6af@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update neigh_valid_get_req function to utilize the new nlmsg_payload()
helper function.
This change improves code clarity and safety by ensuring that the
Netlink message payload is properly validated before accessing its data.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250414-nlmsg-v2-3-3d90cb42c6af@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update neightbl_valid_dump_info function to utilize the new
nlmsg_payload() helper function.
This change improves code clarity and safety by ensuring that the
Netlink message payload is properly validated before accessing its data.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250414-nlmsg-v2-2-3d90cb42c6af@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Create a new helper function, nlmsg_payload(), to simplify checking and
retrieving Netlink message payloads.
This reduces boilerplate code for users who need to verify the message
length before accessing its data.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250414-nlmsg-v2-1-3d90cb42c6af@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Dr. David Alan Gilbert says:
====================
qed deadcoding
This is a set of deadcode removals for the qed ethernet
device. I've tried to avoid removing anything that
are trivial firmware wrappers.
One odd one I've not removed is qed_bw_update(),
it doesn't seem to be called but looks like the only
caller of the bw_update(..) method which qedf does
define. Perhaps qed_bw_update is supposed to be called
somewhere?
====================
Link: https://patch.msgid.link/20250414005247.341243-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
qed_db_recovery_dp() was added in 2018 as part of
commit 36907cd5cd72 ("qed: Add doorbell overflow recovery mechanism")
but has remained unused.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250414005247.341243-6-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While most of the trace code is reachable by other routes
(I think mostly via the qed_features_lookup[] array), there
are a couple of unused wrappers.
qed_print_mcp_trace_line() and qed_print_mcp_trace_results_cont()
were added in 2018 as part of
commit a3f723079df8 ("qed*: Utilize FW 8.37.7.0")
but have remained unused.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250414005247.341243-5-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
qed_ptt_invalidate() was added in 2015 as part of
commit fe56b9e6a8d9 ("qed: Add module with basic common support")
but has remained unused.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250414005247.341243-4-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
qed_calc_session_ctx_validation() and qed_calc_task_ctx_validation()
were added as part of 2017's
commit da09091732ae ("qed*: Utilize FW 8.33.1.0")
but have remained unused.
Remove them.
This leaves; con_region_offsets[], task_region_offsets[],
cdu_crc8_table and qed_calc_cdu_validation_byte() unused.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250414005247.341243-3-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
qed_memset_session_ctx() and qed_memset_task_ctx() were added in 2017
as part of
commit da09091732ae ("qed*: Utilize FW 8.33.1.0")
but have not been used.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250414005247.341243-2-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
AFAICS this function has never had a user.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/ab7b8094-2eea-4e82-a047-fd60117f220b@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Matthieu Baerts says:
====================
mptcp: various small and unrelated improvements
Here are various unrelated patches:
- Patch 1: sched: remove unused structure.
- Patch 2: sched: split the validation part, a preparation for later.
- Patch 3: pm: clarify code, not to think there is a possible UaF.
Note: a previous version has already been sent individually to Netdev.
- Patch 4: subflow: simplify subflow_hmac_valid by passing subflow_req.
- Patch 5: mib: add counter for MPJoin rejected by the PM.
- Patch 6: selftests: validate this new MPJoinRejected counter.
- Patch 7: selftests: define nlh variable only where needed.
- Patch 8: selftests: show how to use IPPROTO_MPTCP with getaddrinfo.
Note: a previous version has already been sent individually to Netdev.
v1: https://lore.kernel.org/20250411-net-next-mptcp-sched-mib-sft-misc-v1-0-85ac8c6654c3@kernel.org
====================
Link: https://patch.msgid.link/20250413-net-next-mptcp-sched-mib-sft-misc-v2-0-0f83a4350150@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mptcp_connect.c is a startup tutorial of MPTCP programming, however
there is a lack of ai_protocol(IPPROTO_MPTCP) usage. Add comment for
getaddrinfo MPTCP support.
This patch first uses IPPROTO_MPTCP to get addrinfo, and if glibc
version is too old, it falls back to using IPPROTO_TCP.
Co-developed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250413-net-next-mptcp-sched-mib-sft-misc-v2-8-0f83a4350150@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It's strange that 'nlh' variable is set to NULL in get_mptcpinfo() and then
this NULL pointer is passed to recv_nlmsg(). In fact, this variable should
be defined in recv_nlmsg(), not get_mptcpinfo().
So this patch drops this useless 'nlh' parameter of recv_nlmsg() and define
'nlh' variable in recv_nlmsg().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250413-net-next-mptcp-sched-mib-sft-misc-v2-7-0f83a4350150@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The parent commit adds this new counter, incremented when receiving a
connection request, if the PM didn't allow the creation of new subflows.
Most of the time, it is then kept at 0, except when the PM limits cause
the receiver side to reject new MPJoin connections. This is the case in
the following tests:
- single subflow, limited by server
- multiple subflows, limited by server
- subflows limited by server w cookies
- userspace pm type rejects join
- userspace pm type prevents mp_prio
Simply set join_syn_rej=1 when checking the MPJoin counters for these
tests.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250413-net-next-mptcp-sched-mib-sft-misc-v2-6-0f83a4350150@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This counter is useful to understand why some paths are rejected, and
not created as expected.
It is incremented when receiving a connection request, if the PM didn't
allow the creation of new subflows.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250413-net-next-mptcp-sched-mib-sft-misc-v2-5-0f83a4350150@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
subflow_hmac_valid() needs to access the MPTCP socket and the subflow
request, but not the request sock that is passed in argument.
Instead, the subflow request can be directly passed to avoid getting it
via an additional cast.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250413-net-next-mptcp-sched-mib-sft-misc-v2-4-0f83a4350150@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit e4c28e3d5c090 ("mptcp: pm: move generic PM helpers to pm.c")
removed an unnecessary if-check, which resulted in returning a freed
pointer.
This still works due to the implicit boolean conversion when returning
the freed pointer from mptcp_remove_anno_list_by_saddr(), but it can be
confusing and potentially error-prone. To improve clarity, add a local
variable to explicitly return a boolean value instead.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250413-net-next-mptcp-sched-mib-sft-misc-v2-3-0f83a4350150@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A new interface .validate has been added in struct bpf_struct_ops
recently. This patch prepares a future struct_ops support by
implementing it as a new helper mptcp_validate_scheduler() for struct
mptcp_sched_ops.
In this helper, check whether the required ops "get_subflow" of struct
mptcp_sched_ops has been implemented.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250413-net-next-mptcp-sched-mib-sft-misc-v2-2-0f83a4350150@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is a follow-up of commit b68b106b0f15 ("mptcp: sched: reduce size
for unused data"), now removing the mptcp_sched_data structure.
Now is a good time to do that, because the previously mentioned WIP work
has been updated, no longer depending on this structure.
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250413-net-next-mptcp-sched-mib-sft-misc-v2-1-0f83a4350150@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Because of the addition of support for 25G/40G devices, update the module
description.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20250414022421.375101-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
Russell King (Oracle)
Taehee Yoo
Thangaraj Samynathan
Jakub Kicinski
Michael Walle
Jacob Keller
Shengyu Qu
Heiner Kallweit
Toke Høiland-Jørgensen
Simon Horman
Breno Leitao
Dr. David Alan Gilbert
zhenwei pi
Geliang Tang
Matthieu Baerts (NGI0)
Thorsten Blum
Jiawen Wu