| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Use of_device_get_match_data() to simplify the code.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214020530.1714631-1-chi.minghao@zte.com.cn
|
|
Recently we added generic "edp-panel"s probed by EDID. To support
panels in this way we look at the panel ID in the EDID and look up the
panel in a table that has power sequence timings. If we find a panel
that's not in the table we will still attempt to use it but we'll use
conservative timings. While it's likely that these conservative
timings will work for most nearly all panels, the performance of
turning the panel off and on suffers.
We'd like to be able to reliably detect the case that we're using the
hardcoded timings without relying on parsing dmesg. This allows us to
implement tests that ensure that no devices get shipped that are
relying on the conservative timings.
Let's add a new debugfs entry to panel devices. It will have one of:
* UNKNOWN - We tried to detect a panel but it wasn't in our table.
* HARDCODED - We're not using generic "edp-panel" probed by EDID.
* A panel name - This is the name of the panel from our table.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204161245.v2.3.I209d72bcc571e1d7d6b793db71bf15c9c0fc9292@changeid
|
|
We'd like panels to be able to add things to debugfs underneath the
connector's directory. Let's plumb it through. A panel will be able to
put things in a "panel" directory under the connector's
directory. Note that debugfs is not ABI and so it's always possible
that the location that the panel gets for its debugfs could change in
the future.
NOTE: this currently only works if you're using a modern
architecture. Specifically the plumbing relies on _both_
drm_bridge_connector and drm_panel_bridge. If you're not using one or
both of these things then things won't be plumbed through.
As a side effect of this change, drm_bridges can also get callbacks to
put stuff underneath the connector's debugfs directory. At the moment
all bridges in the chain have their debugfs_init() called with the
connector's root directory.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204161245.v2.2.Ib0bd5346135cbb0b63006b69b61d4c8af6484740@changeid
|
|
The ti-sn65dsi86 driver shouldn't hand-roll its own bridge
connector. It should use the normal drm_bridge_connector. Let's switch
to do that, removing all of the custom code.
NOTE: this still _doesn't_ implement DRM_BRIDGE_ATTACH_NO_CONNECTOR
support for ti-sn65dsi86 and that would still be a useful thing to do
in the future. It was attempted in the past [1] but put on the back
burner. However, unless we instantly change ti-sn65dsi86 fully from
not supporting DRM_BRIDGE_ATTACH_NO_CONNECTOR at all to _only_
supporting DRM_BRIDGE_ATTACH_NO_CONNECTOR then we'll still need a bit
of time when we support both. This is a better way to support the old
way where the driver hand rolls things itself.
A new notes about the implementation here:
* When using the drm_bridge_connector the connector should be created
after all the bridges, so we change the ordering a bit.
* I'm reasonably certain that we don't need to do anything to "free"
the new drm_bridge_connector. If drm_bridge_connector_init() returns
success then we know drm_connector_init() was called with the
`drm_bridge_connector_funcs`. The `drm_bridge_connector_funcs` has a
.destroy() that does all the cleanup. drm_connector_init() calls
__drm_mode_object_add() with a drm_connector_free() that will call
the .destroy().
* I'm also reasonably certain that I don't need to "undo" the
drm_bridge_attach() if drm_bridge_connector_init() fails. The
"detach" function is private and other similar code doesn't try to
undo the drm_bridge_attach() in error cases. There's also a comment
indicating the lack of balance at the top of drm_bridge_attach().
[1] https://lore.kernel.org/r/20210920225801.227211-4-robdclark@gmail.com
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204161245.v2.1.I3ab26b7f197cc56c874246a43e57913e9c2c1028@changeid
|
|
Use the one provided by TTM instead.
v2: drop new_mem parameter as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214093439.2989-5-christian.koenig@amd.com
|
|
The length of EDID block can be longer than 256 bytes, so we should use
`int` instead of `u8` for the `edid_pos` variable.
Fixes: 8bdfc5dae4e3 ("drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP")
Signed-off-by: Pin-Yen Lin <treapking@chromium.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220210103827.402436-1-treapking@chromium.org
|
|
This is provided by TTM now.
Also switch man->size to bytes instead of pages and fix the double
printing of size and usage in debugfs.
v2: fix size checking as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214093439.2989-8-christian.koenig@amd.com
|
|
This is provided by TTM now.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214093439.2989-7-christian.koenig@amd.com
|
|
This is provided by TTM now.
Also switch man->size to bytes instead of pages and fix the double
printing of size and usage in debugfs.
v2: fix size checking as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214093439.2989-6-christian.koenig@amd.com
|
|
platform_get_resource() may fail and return NULL, so check it's value
before using it.
Reported-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Kevin Tang <kevin3.tang@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/all/20220117084156.9338-1-kevin3.tang@gmail.com
v1 -> v2:
- new patch
|
|
'drm' could be null in sprd_drm_shutdown, and drm_warn maybe dereference
it, remove this warning log.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kevin Tang <kevin3.tang@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/all/20220117084044.9210-1-kevin3.tang@gmail.com
v1 -> v2:
- Split checking platform_get_resource() return value to a separate patch
- Use dev_warn() instead of removing the warning log
|
|
On commit 43531edd53f0 ("drm/sprd: add Unisoc's drm kms master"),
adds the config DRM_SPRD, which selects DRM_KMS_CMA_HELPER.
However, commit 09717af7d13d ("drm: Remove CONFIG_DRM_KMS_CMA_HELPER
option") just removed the DRM_KMS_CMA_HELPER.
So the select DRM_KMS_CMA_HELPER refers to a non-existing kconfig symbol.
Reported-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Kevin Tang <kevin3.tang@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/all/20220117083820.6893-2-kevin3.tang@gmail.com
v1 -> v2:
- fix commit comments long lines issue and drop "On linux-next" comments
|
|
It makes sense to have this in the common manager for debugging and
accounting of how much resources are used.
v2: cleanup kerneldoc a bit
v3: drop the atomic, update counter under lock instead
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com> (v1)
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214093439.2989-2-christian.koenig@amd.com
|
|
Leave the man->size units as driver defined.
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214093439.2989-1-christian.koenig@amd.com
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
|
|
List panel under aux-bus node if it's connected to anx7625's aux bus.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220213103437.3363848-4-hsinyi@chromium.org
|
|
Support reading edid through aux channel if panel is connected to aux
bus. Extend anx7625_aux_dpcd_trans() to implement aux transfer function:
1. panel is populated in devm_of_dp_aux_populate_ep_devices(), so move
anx7625_parse_dt() after.
2. Use pm runtime autosuspend since aux transfer function is called
multiple times when reading edid.
3. No-op if aux transfer length is 0.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Xin Ji <xji@analogixsemi.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220213103437.3363848-3-hsinyi@chromium.org
|
|
Use devm_kzalloc instead of kzalloc and drop kfree(). Let the memory
handled by driver detach.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Xin Ji <xji@analogixsemi.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220213103437.3363848-2-hsinyi@chromium.org
|
|
Send DPCD command to downstream before anx7625 power down,
let downstream monitor enter into standby mode.
Signed-off-by: Xin Ji <xji@analogixsemi.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220213103437.3363848-1-hsinyi@chromium.org
|
|
We have to make sure that
- JZ_LCD_OSDC_ALPHAEN is set
- plane f0 is disabled as it's not working yet
Tested on MIPS Creator CI20 board.
Signed-off-by: Paul Boddie <paul@boddie.org.uk>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Fixes: ef2f5d0aa121 ("drm/ingenic: prepare ingenic drm for later addition of JZ4780")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
[pcercuei: add proper fixes commit, slightly reword commit description]
Link: https://patchwork.freedesktop.org/patch/msgid/9d3a2000d2bb014f1afb0613537bdc523202135d.1644681054.git.hns@goldelico.com
|
|
Set the VM_DONTDUMP flag on mmap'ed VMAs to omit them from core
dumps. It's display-buffer memory; who knows what secrets these
buffers contain.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209155634.3994-3-tzimmermann@suse.de
|
|
Initialize default vm_ops in static initialization of the GEM SHMEM funcs,
instead of the mmap code. It's simply better style. GEM helpers will later
set a VMA's vm_ops from the default automatically.
v2:
* also update the drivers that build upon GEM SHMEM
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209155634.3994-2-tzimmermann@suse.de
|
|
Add DT bindings for the hdmi driver for the Ingenic JZ4780 SoC.
Based on .txt binding from Zubair Lutfullah Kakakhel
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/c806c6007f7bb090bf96ff6bd827f03e88bf4712.1644675566.git.hns@goldelico.com
|
|
Currently when users try to run an application with lima and that hits
an issue such as a timeout, a message saying "fail to save task state"
and "error task list is full" is shown in dmesg.
The error task dump is a debug feature disabled by default, so the
error task list is usually not going to be available at all.
The message can be misleading and creates confusion in bug reports.
We can avoid that code path and that particular message when the user
has not explicitly set the max_error_tasks parameter to enable the
feature.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209093700.30901-1-nunes.erico@gmail.com
|
|
Update function name.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220211205500.601391-1-andrey.grodzovsky@amd.com
|
|
The Bifrost GPU in Rockchip RK356x SoCs has a core and a bus clock.
Reflect this in the SoC specific part of the binding.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
[move the changes to the SoC section]
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209215549.94524-2-michael.riesch@wolfvision.net
|
|
The IDVS group size feature was missing. It is used on some Bifrost and
Valhall GPUs, and is the last kernel-relevant Bifrost feature we're
missing.
This feature adds an extra IDVS group size field to the JM_CONFIG
register. In kbase, the value is configurable via the device tree; kbase
uses 0xF as a default if no value is specified. Until we find a device
demanding otherwise, let's always set the 0xF default on devices which
support this feature mimicking kbase's behaviour.
Tuning this register slightly improves performance of index-driven
vertex shading. On Mali-G52 (with Mesa), overall glmark2 score is
improved from 1026 to 1037. Geometry-heavy scenes like -bshading are
improved from 1068 to 1098.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220211145849.3148-1-alyssa.rosenzweig@collabora.com
|
|
It is illegal to add a dma_fence_chain as timeline point. Flatten out
the fences into a dma_fence_array instead.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nirmoy Das <nirmoy.das@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209182600.434803-1-christian.koenig@amd.com
|
|
When the dw-hdmi bridge is in first place of the bridge chain, this
means there is no way to select an input format of the dw-hdmi HW
component.
Since introduction of display-connector, negotiation was broken since
the dw-hdmi negotiation code only worked when the dw-hdmi bridge was
in last position of the bridge chain or behind another bridge also
supporting input & output format negotiation.
Commit 7cd70656d128 ("drm/bridge: display-connector: implement bus fmts callbacks")
was introduced to make negotiation work again by making display-connector
act as a pass-through concerning input & output format negotiation.
But in the case where the dw-hdmi is single in the bridge chain, for
example on Renesas SoCs, with the display-connector bridge the dw-hdmi
is no more single, breaking output format.
Reported-by: Biju Das <biju.das.jz@bp.renesas.com>
Bisected-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Fixes: 6c3c719936da ("drm/bridge: synopsys: dw-hdmi: add bus format negociation")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: add proper fixes commit]
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204143337.89221-1-narmstrong@baylibre.com
|
|
Clip the damage area horizontally if only a single scanline has been
changed. This is helpful to reduce the memcpy overhead for small writes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209161617.3553-6-tzimmermann@suse.de
|
|
Write helpers used to mark the complete screen as dirty. This is
wasteful for writes that only change a small portion of the screen.
Fix the problem by computing the damaged area from the written
memory range and perform damage handling accordingly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209161617.3553-5-tzimmermann@suse.de
|
|
Add drm_fb_helper_memory_range_to_clip(), a helper function that
accepts an linear range of video memory and converts it into a
rectangle. The computed rectangle describes the damaged area in
terms of scanlines and pixels per scanline.
While at it, make the code more readable by using struct drm_rect
and related helpers.
The code was previously part of the deferred I/O helpers, but is
also useful for damage handling of regular write operations. Update
the deferred I/O code to use the new function.
v2:
* rename helper (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209161617.3553-4-tzimmermann@suse.de
|
|
Don't clip the damage rectangle against the viewport. This only
works if the viewport is located at the beginning of the video
memory and the video memory doesn't extend the screen (i.e., if
there's no overallocation).
Fbdev emulation transfers data from write operations into a
possible shadow buffer, then into a GEM buffer object, and finally
via graphics driver onto the screen.
If callers write outside the currently visible area, clipping the
damage rectangle against the viewport will loose these updates in
the shadow buffer and the fbdev's buffer object will contain stale
data. Panning the viewport to the stale area of the buffer will
display obsolete data.
Instead, mark all written areas as damaged, so that the damage
handler updates the buffer object from the shadow buffer for all
such areas. The graphics driver's later has the option of clipping
the damaged area against the viewport when updating the screen
from the buffer object.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209161617.3553-3-tzimmermann@suse.de
|
|
Computing the clip rectangle is prone to off-by-one errors when writes
happen near the end of a memory page. Point the end of the memory area
to the first trailing byte, so that (end - start) returns the area's
length.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209161617.3553-2-tzimmermann@suse.de
|
|
Seems I forgot to add this to the relevant commit
when submitting.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220210031724.440943-1-andrey.grodzovsky@amd.com
|
|
Since we have a single instance of reset semaphore which we
lock only once even for XGMI hive we don't need the nested
locking hint anymore.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://www.spinics.net/lists/amd-gfx/msg74120.html
|
|
This functions needs to be split into 2 parts where
one is called only once for locking single instance of
reset_domain's sem and reset flag and the other part
which handles MP1 states should still be called for
each device in XGMI hive.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://www.spinics.net/lists/amd-gfx/msg74118.html
|
|
We should have a single instance per entrire reset domain.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://www.spinics.net/lists/amd-gfx/msg74116.html
|
|
We want single instance of reset sem across all
reset clients because in case of XGMI we should stop
access cross device MMIO because any of them could be
in a reset in the moment.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://www.spinics.net/lists/amd-gfx/msg74117.html
|
|
The reset domain contains register access semaphor
now and so needs to be present as long as each device
in a hive needs it and so it cannot be binded to XGMI
hive life cycle.
Adress this by making reset domain refcounted and pointed
by each member of the hive and the hive itself.
v4:
Fix crash on boot witrh XGMI hive by adding type to reset_domain.
XGMI will only create a new reset_domain if prevoius was of single
device type meaning it's first boot. Otherwsie it will take a
refocunt to exsiting reset_domain from the amdgou device.
Add a wrapper around reset_domain->refcount get/put
and a wrapper around send to reset wq (Lijo)
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://www.spinics.net/lists/amd-gfx/msg74121.html
|
|
Since now all GPU resets are serialzied there is no need for this.
This patch also reverts 'drm/amdgpu: race issue when jobs on 2 ring timeout'
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://www.spinics.net/lists/amd-gfx/msg74119.html
|
|
Since we serialize all resets no need to protect from concurrent
resets.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://www.spinics.net/lists/amd-gfx/msg74115.html
|
|
No need to to trigger another work queue inside the work queue.
v3:
Problem:
Extra reset caused by host side FLR notification
following guest side triggered reset.
Fix: Preven qeuing flr_work from mailbox irq if guest
already executing a reset.
Suggested-by: Liu Shaoyun <Shaoyun.Liu@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Liu Shaoyun <Shaoyun.Liu@amd.com>
Link: https://www.spinics.net/lists/amd-gfx/msg74114.html
|
|
Use reset domain wq also for non TDR gpu recovery trigers
such as sysfs and RAS. We must serialize all possible
GPU recoveries to gurantee no concurrency there.
For TDR call the original recovery function directly since
it's already executed from within the wq. For others just
use a wrapper to qeueue work and wait on it to finish.
v2: Rename to amdgpu_recover_work_struct
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://www.spinics.net/lists/amd-gfx/msg74113.html
|
|
Before we initialize schedulers we must know which reset
domain are we in - for single device there iis a single
domain per device and so single wq per device. For XGMI
the reset domain spans the entire XGMI hive and so the
reset wq is per hive.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://www.spinics.net/lists/amd-gfx/msg74112.html
|
|
Defined a reset_domain struct such that
all the entities that go through reset
together will be serialized one against
another. Do it for both single device and
XGMI hive cases.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Suggested-by: Christian König <ckoenig.leichtzumerken@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://www.spinics.net/lists/amd-gfx/msg74111.html
|
|
Currently we can get a warning on systems with eDP backlights like so:
nv_backlight: invalid backlight type
WARNING: CPU: 4 PID: 454 at drivers/video/backlight/backlight.c:420
backlight_device_register+0x226/0x250
This happens as a result of us not filling out props.type for the eDP
backlight, even though we do it for all other backlight types.
Since nothing in our driver uses anything but BACKLIGHT_RAW, let's take the
props\.type assignments out of the codepaths for individual backlight types
and just set it unconditionally to prevent this from happening again.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 6eca310e8924 ("drm/nouveau/kms/nv50-: Add basic DPCD backlight support for nouveau")
Cc: <stable@vger.kernel.org> # v5.15+
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204193319.451119-1-lyude@redhat.com
|
|
It seems that some laptops will report having both an eDP and LVDS
connector, even though only the LVDS connector is actually hooked up. This
can lead to issues with backlight registration if the eDP connector ends up
getting registered before the LVDS connector, as the backlight device will
then be registered to the eDP connector instead of the LVDS connector.
So, fix this by only registering the backlight on connectors that are
reported as being connected.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 6eca310e8924 ("drm/nouveau/kms/nv50-: Add basic DPCD backlight support for nouveau")
Bugzilla: https://gitlab.freedesktop.org/drm/nouveau/-/issues/137
Cc: <stable@vger.kernel.org> # v5.15+
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204180504.328999-1-lyude@redhat.com
|
|
Make use of the struct_size() helper instead of an open-coded version,
in order to avoid any potential type mistakes or integer overflows that,
in the worse scenario, could lead to heap overflows.
Link: https://github.com/KSPP/linux/issues/160
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220207233923.GA524723@embeddedor
|
|
Add helpers for initializing SIL164-based connectors. These used to be
handled by the VGA connector code. But SIL164 provides output via DVI-I,
so set the encoder and connector types accordingly.
If a SIL164 chip has been detected, ast will now create a DVI-I
connector instead of a VGA connector.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220207141544.30015-10-tzimmermann@suse.de
|
|
Add helpers for DP501-based connectors. DP501 provides output via
DisplayPort. This used to be handled by the VGA connector code.
If a DP501 chip has been detected, ast will now create a DisplayPort
connector instead of a VGA connector.
Remove the DP501 code from ast_vga_connector_helper_get_modes(). Also
remove the call to drm_connector_update_edid_property(), which is
performed by drm_get_edid().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220207141544.30015-9-tzimmermann@suse.de
|
Minghao Chi (CGEL ZTE)
Douglas Anderson
Christian König
Pin-Yen Lin
Kevin Tang
Hsin-Yi Wang
Xin Ji
Paul Boddie
Thomas Zimmermann
Sam Ravnborg
Erico Nunes
Andrey Grodzovsky
Alex Bee
Alyssa Rosenzweig
Neil Armstrong
Lyude Paul
Gustavo A. R. Silva