aboutsummaryrefslogtreecommitdiffstatshomepage
AgeCommit message (Collapse)AuthorFilesLines
2022-07-26scsi: core: Fix warning in scsi_alloc_sgtables()Jason Yan1-1/+1
As explained in SG_IO howto[1]: "If iovec_count is non-zero then 'dxfer_len' should be equal to the sum of iov_len lengths. If not, the minimum of the two is the transfer length." When iovec_count is non-zero and dxfer_len is zero, the sg_io() just genarated a null bio, and finally caused a warning below. To fix it, skip generating a bio for this request if dxfer_len is zero. [1] https://tldp.org/HOWTO/SCSI-Generic-HOWTO/x198.html WARNING: CPU: 2 PID: 3643 at drivers/scsi/scsi_lib.c:1032 scsi_alloc_sgtables+0xc7d/0xf70 drivers/scsi/scsi_lib.c:1032 Modules linked in: CPU: 2 PID: 3643 Comm: syz-executor397 Not tainted 5.17.0-rc3-syzkaller-00316-gb81b1829e7e3 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-204/01/2014 RIP: 0010:scsi_alloc_sgtables+0xc7d/0xf70 drivers/scsi/scsi_lib.c:1032 Code: e7 fc 31 ff 44 89 f6 e8 c1 4e e7 fc 45 85 f6 0f 84 1a f5 ff ff e8 93 4c e7 fc 83 c5 01 0f b7 ed e9 0f f5 ff ff e8 83 4c e7 fc <0f> 0b 41 bc 0a 00 00 00 e9 2b fb ff ff 41 bc 09 00 00 00 e9 20 fb RSP: 0018:ffffc90000d07558 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff88801bfc96a0 RCX: 0000000000000000 RDX: ffff88801c876000 RSI: ffffffff849060bd RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff849055b9 R11: 0000000000000000 R12: ffff888012b8c000 R13: ffff88801bfc9580 R14: 0000000000000000 R15: ffff88801432c000 FS: 00007effdec8e700(0000) GS:ffff88802cc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007effdec6d718 CR3: 00000000206d6000 CR4: 0000000000150ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> scsi_setup_scsi_cmnd drivers/scsi/scsi_lib.c:1219 [inline] scsi_prepare_cmd drivers/scsi/scsi_lib.c:1614 [inline] scsi_queue_rq+0x283e/0x3630 drivers/scsi/scsi_lib.c:1730 blk_mq_dispatch_rq_list+0x6ea/0x22e0 block/blk-mq.c:1851 __blk_mq_sched_dispatch_requests+0x20b/0x410 block/blk-mq-sched.c:299 blk_mq_sched_dispatch_requests+0xfb/0x180 block/blk-mq-sched.c:332 __blk_mq_run_hw_queue+0xf9/0x350 block/blk-mq.c:1968 __blk_mq_delay_run_hw_queue+0x5b6/0x6c0 block/blk-mq.c:2045 blk_mq_run_hw_queue+0x30f/0x480 block/blk-mq.c:2096 blk_mq_sched_insert_request+0x340/0x440 block/blk-mq-sched.c:451 blk_execute_rq+0xcc/0x340 block/blk-mq.c:1231 sg_io+0x67c/0x1210 drivers/scsi/scsi_ioctl.c:485 scsi_ioctl_sg_io drivers/scsi/scsi_ioctl.c:866 [inline] scsi_ioctl+0xa66/0x1560 drivers/scsi/scsi_ioctl.c:921 sd_ioctl+0x199/0x2a0 drivers/scsi/sd.c:1576 blkdev_ioctl+0x37a/0x800 block/ioctl.c:588 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7effdecdc5d9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 81 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007effdec8e2f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007effded664c0 RCX: 00007effdecdc5d9 RDX: 0000000020002300 RSI: 0000000000002285 RDI: 0000000000000004 RBP: 00007effded34034 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003 R13: 00007effded34054 R14: 2f30656c69662f2e R15: 00007effded664c8 Link: https://lore.kernel.org/r/20220720025120.3226770-1-yanaijie@huawei.com Fixes: 25636e282fe9 ("block: fix SG_IO vector request data length handling") Reported-by: syzbot+d44b35ecfb807e5af0b5@syzkaller.appspotmail.com Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-26scsi: ufs: host: Hold reference returned by of_parse_phandle()Liang He1-2/+13
In ufshcd_populate_vreg(), we should hold the reference returned by of_parse_phandle() and then use it to call of_node_put() for refcount balance. Link: https://lore.kernel.org/r/20220719071529.1081166-1-windhl@126.com Fixes: aa4976130934 ("ufs: Add regulator enable support") Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-26scsi: mpt3sas: Stop fw fault watchdog work item during system shutdownDavid Jeffery1-0/+1
During system shutdown or reboot, mpt3sas will reset the firmware back to ready state. However, the driver leaves running a watchdog work item intended to keep the firmware in operational state. This causes a second, unneeded reset on shutdown and moves the firmware back to operational instead of in ready state as intended. And if the mpt3sas_fwfault_debug module parameter is set, this extra reset also panics the system. mpt3sas's scsih_shutdown needs to stop the watchdog before resetting the firmware back to ready state. Link: https://lore.kernel.org/r/20220722142448.6289-1-djeffery@redhat.com Fixes: fae21608c31c ("scsi: mpt3sas: Transition IOC to Ready state during shutdown") Tested-by: Laurence Oberman <loberman@redhat.com> Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: David Jeffery <djeffery@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-13scsi: pm80xx: Set stopped phy's linkrate to DisabledChangyuan Lyu1-1/+5
Negotiated link rate needs to be updated to 'Disabled' when phy is stopped. Link: https://lore.kernel.org/r/20220708205026.969161-1-changyuanl@google.com Reviewed-by: Igor Pylypiv <ipylypiv@google.com> Signed-off-by: Changyuan Lyu <changyuanl@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-13scsi: pm80xx: Fix 'Unknown' max/min linkrateChangyuan Lyu2-16/+5
Currently, the data flow of the max/min linkrate in the driver is * in pm8001_get_lrate_mode(): hardcoded value ==> struct sas_phy * in pm8001_bytes_dmaed(): struct pm8001_phy ==> struct sas_phy * in pm8001_phy_control(): libsas data ==> struct pm8001_phy Since pm8001_bytes_dmaed() follows pm8001_get_lrate_mode(), and the fields in struct pm8001_phy are not initialized, sysfs `/sys/class/sas_phy/phy-*/maximum_linkrate` always shows `Unknown`. To fix the issue, change the dataflow to the following: * in pm8001_phy_init(): initial value ==> struct pm8001_phy * in pm8001_get_lrate_mode(): struct pm8001_phy ==> struct sas_phy * in pm8001_phy_control(): libsas data ==> struct pm8001_phy For negotiated linkrate, the current dataflow is: * in pm8001_get_lrate_mode(): iomb data ==> struct asd_sas_phy ==> struct sas_phy * in pm8001_bytes_dmaed(): struct asd_sas_phy ==> struct sas_phy Since pm8001_bytes_dmaed() follows pm8001_get_lrate_mode(), the assignment statements in pm8001_bytes_dmaed() are unnecessary and cleaned up. Link: https://lore.kernel.org/r/20220707175210.528858-1-changyuanl@google.com Reviewed-by: Igor Pylypiv <ipylypiv@google.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Changyuan Lyu <changyuanl@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-13scsi: ufs: core: Fix missing clk change notification on host resetPo-Wen Kao1-1/+1
In ufshcd_host_reset_and_restore(), ufshcd_set_clk_freq() is called to scale clock rate. However, this did not call vops->clk_scale_notify() to inform platform driver of clock change. Call ufshcd_scale_clks() instead so that clock change can be properly handled. Link: https://lore.kernel.org/r/20220711144224.17916-2-powen.kao@mediatek.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-13scsi: ufs: core: Drop loglevel of WriteBoost messageBjorn Andersson1-1/+1
Commit '3b5f3c0d0548 ("scsi: ufs: core: Tidy up WB configuration code")' changed the log level of the write boost enable/disable notification from debug to info. This results in a lot of noise in the kernel log during normal operation. Drop it back to debug level to avoid this. Link: https://lore.kernel.org/r/20220709000027.3929970-1-bjorn.andersson@linaro.org Fixes: 3b5f3c0d0548 ("scsi: ufs: core: Tidy up WB configuration code") Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Acked-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-13scsi: megaraid: Clear READ queue map's nr_queuesMing Lei1-0/+3
The megaraid SCSI driver sets set->nr_maps as 3 if poll_queues is > 0, and blk-mq actually initializes each map's nr_queues as nr_hw_queues. Consequently the driver has to clear READ queue map's nr_queues, otherwise the queue map becomes broken if poll_queues is set as non-zero. Link: https://lore.kernel.org/r/20220706125942.528533-1-ming.lei@redhat.com Fixes: 9e4bec5b2a23 ("scsi: megaraid_sas: mq_poll support") Cc: Kashyap Desai <kashyap.desai@broadcom.com> Cc: sumit.saxena@broadcom.com Cc: chandrakanth.patil@broadcom.com Cc: linux-block@vger.kernel.org Cc: Hannes Reinecke <hare@suse.de> Reported-by: Guangwu Zhang <guazhang@redhat.com> Tested-by: Guangwu Zhang <guazhang@redhat.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-07scsi: target: Fix WRITE_SAME No Data Buffer crashMike Christie3-0/+13
In newer version of the SBC specs, we have a NDOB bit that indicates there is no data buffer that gets written out. If this bit is set using commands like "sg_write_same --ndob" we will crash in target_core_iblock/file's execute_write_same handlers when we go to access the se_cmd->t_data_sg because its NULL. This patch adds a check for the NDOB bit in the common WRITE SAME code because we don't support it. And, it adds a check for zero SG elements in each handler in case the initiator tries to send a normal WRITE SAME with no data buffer. Link: https://lore.kernel.org/r/20220628022325.14627-2-michael.christie@oracle.com Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-27scsi: hisi_sas: Limit max hw sectors for v3 HWJohn Garry1-0/+7
If the controller is behind an IOMMU then the IOMMU IOVA caching range can affect performance, as discussed in [0]. Limit the max HW sectors to not exceed this limit. We need to hardcode the value until a proper DMA mapping API is available. [0] https://lore.kernel.org/linux-iommu/20210129092120.1482-1-thunder.leizhen@huawei.com/ Link: https://lore.kernel.org/r/1655988119-223714-1-git-send-email-john.garry@huawei.com Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: ibmvfc: Store vhost pointer during subcrq allocationTyrel Datwyler2-2/+3
Currently the back pointer from a queue to the vhost adapter isn't set until after subcrq interrupt registration. The value is available when a queue is first allocated and can/should be also set for primary and async queues as well as subcrqs. This fixes a crash observed during kexec/kdump on Power 9 with legacy XICS interrupt controller where a pending subcrq interrupt from the previous kernel can be replayed immediately upon IRQ registration resulting in dereference of a garbage backpointer in ibmvfc_interrupt_scsi(). Kernel attempted to read user page (58) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x00000058 Faulting instruction address: 0xc008000003216a08 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c008000003216a08] ibmvfc_interrupt_scsi+0x40/0xb0 [ibmvfc] LR [c0000000082079e8] __handle_irq_event_percpu+0x98/0x270 Call Trace: [c000000047fa3d80] [c0000000123e6180] 0xc0000000123e6180 (unreliable) [c000000047fa3df0] [c0000000082079e8] __handle_irq_event_percpu+0x98/0x270 [c000000047fa3ea0] [c000000008207d18] handle_irq_event+0x98/0x188 [c000000047fa3ef0] [c00000000820f564] handle_fasteoi_irq+0xc4/0x310 [c000000047fa3f40] [c000000008205c60] generic_handle_irq+0x50/0x80 [c000000047fa3f60] [c000000008015c40] __do_irq+0x70/0x1a0 [c000000047fa3f90] [c000000008016d7c] __do_IRQ+0x9c/0x130 [c000000014622f60] [0000000020000000] 0x20000000 [c000000014622ff0] [c000000008016e50] do_IRQ+0x40/0xa0 [c000000014623020] [c000000008017044] replay_soft_interrupts+0x194/0x2f0 [c000000014623210] [c0000000080172a8] arch_local_irq_restore+0x108/0x170 [c000000014623240] [c000000008eb1008] _raw_spin_unlock_irqrestore+0x58/0xb0 [c000000014623270] [c00000000820b12c] __setup_irq+0x49c/0x9f0 [c000000014623310] [c00000000820b7c0] request_threaded_irq+0x140/0x230 [c000000014623380] [c008000003212a50] ibmvfc_register_scsi_channel+0x1e8/0x2f0 [ibmvfc] [c000000014623450] [c008000003213d1c] ibmvfc_init_sub_crqs+0xc4/0x1f0 [ibmvfc] [c0000000146234d0] [c0080000032145a8] ibmvfc_reset_crq+0x150/0x210 [ibmvfc] [c000000014623550] [c0080000032147c8] ibmvfc_init_crq+0x160/0x280 [ibmvfc] [c0000000146235f0] [c00800000321a9cc] ibmvfc_probe+0x2a4/0x530 [ibmvfc] Link: https://lore.kernel.org/r/20220616191126.1281259-2-tyreld@linux.ibm.com Fixes: 3034ebe26389 ("scsi: ibmvfc: Add alloc/dealloc routines for SCSI Sub-CRQ Channels") Cc: stable@vger.kernel.org Reviewed-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: ibmvfc: Allocate/free queue resource only during probe/removeTyrel Datwyler1-17/+62
Currently, the sub-queues and event pool resources are allocated/freed for every CRQ connection event such as reset and LPM. This exposes the driver to a couple issues. First the inefficiency of freeing and reallocating memory that can simply be resued after being sanitized. Further, a system under memory pressue runs the risk of allocation failures that could result in a crippled driver. Finally, there is a race window where command submission/compeletion can try to pull/return elements from/to an event pool that is being deleted or already has been deleted due to the lack of host state around freeing/allocating resources. The following is an example of list corruption following a live partition migration (LPM): Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: vfat fat isofs cdrom ext4 mbcache jbd2 nft_counter nft_compat nf_tables nfnetlink rpadlpar_io rpaphp xsk_diag nfsv3 nfs_acl nfs lockd grace fscache netfs rfkill bonding tls sunrpc pseries_rng drm drm_panel_orientation_quirks xfs libcrc32c dm_service_time sd_mod t10_pi sg ibmvfc scsi_transport_fc ibmveth vmx_crypto dm_multipath dm_mirror dm_region_hash dm_log dm_mod ipmi_devintf ipmi_msghandler fuse CPU: 0 PID: 2108 Comm: ibmvfc_0 Kdump: loaded Not tainted 5.14.0-70.9.1.el9_0.ppc64le #1 NIP: c0000000007c4bb0 LR: c0000000007c4bac CTR: 00000000005b9a10 REGS: c00000025c10b760 TRAP: 0700 Not tainted (5.14.0-70.9.1.el9_0.ppc64le) MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 2800028f XER: 0000000f CFAR: c0000000001f55bc IRQMASK: 0 GPR00: c0000000007c4bac c00000025c10ba00 c000000002a47c00 000000000000004e GPR04: c0000031e3006f88 c0000031e308bd00 c00000025c10b768 0000000000000027 GPR08: 0000000000000000 c0000031e3009dc0 00000031e0eb0000 0000000000000000 GPR12: c0000031e2ffffa8 c000000002dd0000 c000000000187108 c00000020fcee2c0 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 c008000002f81300 GPR24: 5deadbeef0000100 5deadbeef0000122 c000000263ba6910 c00000024cc88000 GPR28: 000000000000003c c0000002430a0000 c0000002430ac300 000000000000c300 NIP [c0000000007c4bb0] __list_del_entry_valid+0x90/0x100 LR [c0000000007c4bac] __list_del_entry_valid+0x8c/0x100 Call Trace: [c00000025c10ba00] [c0000000007c4bac] __list_del_entry_valid+0x8c/0x100 (unreliable) [c00000025c10ba60] [c008000002f42284] ibmvfc_free_queue+0xec/0x210 [ibmvfc] [c00000025c10bb10] [c008000002f4246c] ibmvfc_deregister_scsi_channel+0xc4/0x160 [ibmvfc] [c00000025c10bba0] [c008000002f42580] ibmvfc_release_sub_crqs+0x78/0x130 [ibmvfc] [c00000025c10bc20] [c008000002f4f6cc] ibmvfc_do_work+0x5c4/0xc70 [ibmvfc] [c00000025c10bce0] [c008000002f4fdec] ibmvfc_work+0x74/0x1e8 [ibmvfc] [c00000025c10bda0] [c0000000001872b8] kthread+0x1b8/0x1c0 [c00000025c10be10] [c00000000000cd64] ret_from_kernel_thread+0x5c/0x64 Instruction dump: 40820034 38600001 38210060 4e800020 7c0802a6 7c641b78 3c62fe7a 7d254b78 3863b590 f8010070 4ba309cd 60000000 <0fe00000> 7c0802a6 3c62fe7a 3863b640 ---[ end trace 11a2b65a92f8b66c ]--- ibmvfc 30000003: Send warning. Receive queue closed, will retry. Add registration/deregistration helpers that are called instead during connection resets to sanitize and reconfigure the queues. Link: https://lore.kernel.org/r/20220616191126.1281259-3-tyreld@linux.ibm.com Fixes: 3034ebe26389 ("scsi: ibmvfc: Add alloc/dealloc routines for SCSI Sub-CRQ Channels") Cc: stable@vger.kernel.org Reviewed-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: storvsc: Correct reporting of Hyper-V I/O size limitsSaurabh Sengar1-5/+22
Current code is based on the idea that the max number of SGL entries also determines the max size of an I/O request. While this idea was true in older versions of the storvsc driver when SGL entry length was limited to 4 Kbytes, commit 3d9c3dcc58e9 ("scsi: storvsc: Enable scatterlist entry lengths > 4Kbytes") removed that limitation. It's now theoretically possible for the block layer to send requests that exceed the maximum size supported by Hyper-V. This problem doesn't currently happen in practice because the block layer defaults to a 512 Kbyte maximum, while Hyper-V in Azure supports 2 Mbyte I/O sizes. But some future configuration of Hyper-V could have a smaller max I/O size, and the block layer could exceed that max. Fix this by correctly setting max_sectors as well as sg_tablesize to reflect the maximum I/O size that Hyper-V reports. While allowing I/O sizes larger than the block layer default of 512 Kbytes doesn’t provide any noticeable performance benefit in the tests we ran, it's still appropriate to report the correct underlying Hyper-V capabilities to the Linux block layer. Also tweak the virt_boundary_mask to reflect that the required alignment derives from Hyper-V communication using a 4 Kbyte page size, and not on the guest page size, which might be bigger (eg. ARM64). Link: https://lore.kernel.org/r/1655190355-28722-1-git-send-email-ssengar@linux.microsoft.com Fixes: 3d9c3dcc58e9 ("scsi: storvsc: Enable scatter list entry lengths > 4Kbytes") Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: ufs: Fix a race between the interrupt handler and the reset handlerBart Van Assche1-9/+19
Prevent that both the interrupt handler and the reset handler try to complete a request at the same time. This patch is the result of an analysis of the following crash: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000120 CPU: 0 PID: 0 Comm: swapper/0 Tainted: G OE 5.10.107-android13-4-00051-g1e48e8970cca-ab8664745 #1 pc : ufshcd_release_scsi_cmd+0x30/0x46c lr : __ufshcd_transfer_req_compl+0x4fc/0x9c0 Call trace: ufshcd_release_scsi_cmd+0x30/0x46c __ufshcd_transfer_req_compl+0x4fc/0x9c0 ufshcd_poll+0xf0/0x208 ufshcd_sl_intr+0xb8/0xf0 ufshcd_intr+0x168/0x2f4 __handle_irq_event_percpu+0xa0/0x30c handle_irq_event+0x84/0x178 handle_fasteoi_irq+0x150/0x2e8 __handle_domain_irq+0x114/0x1e4 gic_handle_irq.31846+0x58/0x300 el1_irq+0xe4/0x1c0 cpuidle_enter_state+0x3ac/0x8c4 do_idle+0x2fc/0x55c cpu_startup_entry+0x84/0x90 kernel_init+0x0/0x310 start_kernel+0x0/0x608 start_kernel+0x4ec/0x608 Link: https://lore.kernel.org/r/20220613214442.212466-4-bvanassche@acm.org Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: ufs: Support clearing multiple commands at onceBart Van Assche1-14/+28
Modify ufshcd_clear_cmd() such that it supports clearing multiple commands at once instead of one command at a time. This change will be used in a later patch to reduce the time spent in the reset handler. Link: https://lore.kernel.org/r/20220613214442.212466-3-bvanassche@acm.org Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: ufs: Simplify ufshcd_clear_cmd()Bart Van Assche1-6/+2
Remove the local variable 'err'. This patch does not change any functionality. Link: https://lore.kernel.org/r/20220613214442.212466-2-bvanassche@acm.org Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-13scsi: iscsi: Exclude zero from the endpoint ID rangeSergey Gorenko1-1/+6
The kernel returns an endpoint ID as r.ep_connect_ret.handle in the iscsi_uevent. The iscsid validates a received endpoint ID and treats zero as an error. The commit referenced in the fixes line changed the endpoint ID range, and zero is always assigned to the first endpoint ID. So, the first attempt to create a new iSER connection always fails. Link: https://lore.kernel.org/r/20220613123854.55073-1-sergeygo@nvidia.com Fixes: 3c6ae371b8a1 ("scsi: iscsi: Release endpoint ID when its freed") Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Sergey Gorenko <sergeygo@nvidia.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-10scsi: scsi_debug: Fix zone transition to full conditionDamien Le Moal1-2/+20
When a write command to a sequential write required or sequential write preferred zone result in the zone write pointer reaching the end of the zone, the zone condition must be set to full AND the number of implicitly or explicitly open zones updated to have a correct accounting for zone resources. However, the function zbc_inc_wp() only sets the zone condition to full without updating the open zone counters, resulting in a zone state machine breakage. Introduce the helper function zbc_set_zone_full() and use it in zbc_inc_wp() to correctly transition zones to the full condition. Link: https://lore.kernel.org/r/20220608011302.92061-1-damien.lemoal@opensource.wdc.com Fixes: f0d1cf9378bd ("scsi: scsi_debug: Add ZBC zone commands") Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-07scsi: pmcraid: Fix missing resource cleanup in error caseChengguang Xu1-1/+1
Fix missing resource cleanup (when '(--i) == 0') for error case in pmcraid_register_interrupt_handler(). Link: https://lore.kernel.org/r/20220529153456.4183738-6-cgxu519@mykernel.net Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Chengguang Xu <cgxu519@mykernel.net> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-07scsi: ipr: Fix missing/incorrect resource cleanup in error caseChengguang Xu1-2/+2
Fix missing resource cleanup (when '(--i) == 0') for error case in ipr_alloc_mem() and skip incorrect resource cleanup (when '(--i) == 0') for error case in ipr_request_other_msi_irqs() because variable i started from 1. Link: https://lore.kernel.org/r/20220529153456.4183738-4-cgxu519@mykernel.net Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Chengguang Xu <cgxu519@mykernel.net> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-07scsi: mpt3sas: Fix out-of-bounds compiler warningHelge Deller1-11/+12
I'm facing this warning when building for the parisc64 architecture: drivers/scsi/mpt3sas/mpt3sas_base.c: In function ‘_base_make_ioc_operational’: drivers/scsi/mpt3sas/mpt3sas_base.c:5396:40: warning: array subscript ‘Mpi2SasIOUnitPage1_t {aka struct _MPI2_CONFIG_PAGE_SASIOUNIT_1}[0]’ is partly outside array bounds of ‘unsigned char[20]’ [-Warray-bounds] 5396 | (le16_to_cpu(sas_iounit_pg1->SASWideMaxQueueDepth)) ? drivers/scsi/mpt3sas/mpt3sas_base.c:5382:26: note: referencing an object of size 20 allocated by ‘kzalloc’ 5382 | sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL); | ^~~~~~~~~~~~~~~~~~~~~~~ The problem is, that only 20 bytes are allocated with kmalloc(), which is sufficient to hold the bytes which are needed. Nevertheless, gcc complains because the whole Mpi2SasIOUnitPage1_t struct is 32 bytes in size and thus doesn't fit into those 20 bytes. This patch simply allocates all 32 bytes (instead of 20) and thus avoids the warning. There is no functional change introduced by this patch. While touching the code I cleaned up to calculation of max_wideport_qd, max_narrowport_qd and max_sata_qd to make it easier readable. Test successfully tested on a HP C8000 PA-RISC workstation with 64-bit kernel. Link: https://lore.kernel.org/r/YpZ197iZdDZSCzrT@p100 Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-07scsi: lpfc: Update lpfc version to 14.2.0.4James Smart1-1/+1
Update lpfc version to 14.2.0.4 Link: https://lore.kernel.org/r/20220603174329.63777-10-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-07scsi: lpfc: Allow reduced polling rate for nvme_admin_async_event cmd completionJames Smart2-2/+12
NVMe Asynchronous Event Request commands have no command timeout value per specifications. Set WQE option to allow a reduced FLUSH polling rate for I/O error detection specifically for nvme_admin_async_event commands. Link: https://lore.kernel.org/r/20220603174329.63777-9-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-07scsi: lpfc: Add more logging of cmd and cqe information for aborted NVMe cmdsJames Smart1-8/+27
When an NVMe command is aborted or completes with an ERSP, log the opcode and command ID fields to help provide more detail on the failed command. Link: https://lore.kernel.org/r/20220603174329.63777-8-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-07scsi: lpfc: Fix port stuck in bypassed state after LIP in PT2PT topologyJames Smart1-1/+2
After issuing a LIP, a specific target vendor does not ACC the FLOGI that lpfc sends. However, it does send its own FLOGI that lpfc ACCs. The target then establishes the port IDs by sending a PLOGI. lpfc PLOGI_ACCs and starts the RPI registration for DID 0x000001. The target then sends a LOGO to the fabric DID. lpfc is currently treating the LOGO from the fabric DID as a link down and cleans up all the ndlps. The ndlp for DID 0x000001 is put back into NPR and discovery stops, leaving the port in stuck in bypassed mode. Change lpfc behavior such that if a LOGO is received for the fabric DID in PT2PT topology skip the lpfc_linkdown_port() routine and just move the fabric DID back to NPR. Link: https://lore.kernel.org/r/20220603174329.63777-7-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-07scsi: lpfc: Resolve NULL ptr dereference after an ELS LOGO is abortedJames Smart1-12/+9
A use-after-free crash can occur after an ELS LOGO is aborted. Specifically, a nodelist structure is freed and then ndlp->vport->cfg_log_verbose is dereferenced in lpfc_nlp_get() when the discovery state machine is mistakenly called a second time with NLP_EVT_DEVICE_RM argument. Rework lpfc_cmpl_els_logo() to prevent the duplicate calls to release a nodelist structure. Link: https://lore.kernel.org/r/20220603174329.63777-6-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-07scsi: lpfc: Address NULL pointer dereference after starget_to_rport()James Smart1-0/+6
Calls to starget_to_rport() may return NULL. Add check for NULL rport before dereference. Link: https://lore.kernel.org/r/20220603174329.63777-5-jsmart2021@gmail.com Fixes: bb21fc9911ee ("scsi: lpfc: Use fc_block_rport()") Cc: <stable@vger.kernel.org> # v5.18 Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-07scsi: lpfc: Resolve some cleanup issues following SLI path refactoringJames Smart2-14/+13
Following refactoring and consolidation in SLI processing, fix up some minor issues related to SLI path: - Correct the setting of LPFC_EXCHANGE_BUSY flag in response IOCB. - Fix some typographical errors. - Fix duplicate log messages. Link: https://lore.kernel.org/r/20220603174329.63777-4-jsmart2021@gmail.com Fixes: 1b64aa9eae28 ("scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4") Cc: <stable@vger.kernel.org> # v5.18 Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-07scsi: lpfc: Resolve some cleanup issues following abort path refactoringJames Smart2-5/+5
Refactoring and consolidation of abort paths: - lpfc_sli4_abort_fcp_cmpl() and lpfc_sli_abort_fcp_cmpl() are combined into a single generic lpfc_sli_abort_fcp_cmpl() routine. Thus, remove extraneous lpfc_sli4_abort_fcp_cmpl() prototype declaration. - lpfc_nvme_abort_fcreq_cmpl() abort completion routine is called with a mismatched argument type. This may result in misleading log message content. Update to the correct argument type of lpfc_iocbq instead of lpfc_wcqe_complete. The lpfc_wcqe_complete should be derived from the lpfc_iocbq structure. Link: https://lore.kernel.org/r/20220603174329.63777-3-jsmart2021@gmail.com Fixes: 31a59f75702f ("scsi: lpfc: SLI path split: Refactor Abort paths") Cc: <stable@vger.kernel.org> # v5.18 Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-07scsi: lpfc: Correct BDE type for XMIT_SEQ64_WQE in lpfc_ct_reject_event()James Smart1-1/+1
A previous commit assumed all XMIT_SEQ64_WQEs are prepped with the correct BDE type in word 0-2. However, lpfc_ct_reject_event() routine was missed and is still filling out the incorrect BDE type. Fix lpfc_ct_reject_event() routine so that type BUFF_TYPE_BDE_64 is set instead of BUFF_TYPE_BLP_64. Link: https://lore.kernel.org/r/20220603174329.63777-2-jsmart2021@gmail.com Fixes: 596fc8adb171 ("scsi: lpfc: Fix dmabuf ptr assignment in lpfc_ct_reject_event()") Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-07scsi: vmw_pvscsi: Expand vcpuHint to 16 bitsWentao Wang1-2/+2
vcpuHint has been expanded to 16 bit on host to enable routing to more CPUs. Guest side should align with the change. This change has been tested with hosts with 8-bit and 16-bit vcpuHint, on both platforms host side can get correct value. Link: https://lore.kernel.org/r/EF35F4D5-5DCC-42C5-BCC4-29DF1729B24C@vmware.com Signed-off-by: Wentao Wang <wwentao@vmware.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-07scsi: sd: Fix interpretation of VPD B9h lengthTyler Erickson1-1/+1
Fixing the interpretation of the length of the B9h VPD page (Concurrent Positioning Ranges). Adding 4 is necessary as the first 4 bytes of the page is the header with page number and length information. Adding 3 was likely a misinterpretation of the SBC-5 specification which sets all offsets starting at zero. This fixes the error in dmesg: [ 9.014456] sd 1:0:0:0: [sda] Invalid Concurrent Positioning Ranges VPD page Link: https://lore.kernel.org/r/20220602225113.10218-4-tyler.erickson@seagate.com Fixes: e815d36548f0 ("scsi: sd: add concurrent positioning ranges support") Cc: stable@vger.kernel.org Tested-by: Michael English <michael.english@seagate.com> Reviewed-by: Muhammad Ahmad <muhammad.ahmad@seagate.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Tyler Erickson <tyler.erickson@seagate.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-05Linux 5.19-rc1Linus Torvalds1-2/+2
2022-06-05Merge tag 'pull-work.fd-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds3-6/+4
Pull file descriptor fix from Al Viro: "Fix for breakage in #work.fd this window" * tag 'pull-work.fd-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix the breakage in close_fd_get_file() calling conventions change
2022-06-05Merge tag 'mm-hotfixes-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mmLinus Torvalds7-35/+50
Pull mm hotfixes from Andrew Morton: "Fixups for various recently-added and longer-term issues and a few minor tweaks: - fixes for material merged during this merge window - cc:stable fixes for more longstanding issues - minor mailmap and MAINTAINERS updates" * tag 'mm-hotfixes-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm/oom_kill.c: fix vm_oom_kill_table[] ifdeffery x86/kexec: fix memory leak of elf header buffer mm/memremap: fix missing call to untrack_pfn() in pagemap_range() mm: page_isolation: use compound_nr() correctly in isolate_single_pageblock() mm: hugetlb_vmemmap: fix CONFIG_HUGETLB_PAGE_FREE_VMEMMAP_DEFAULT_ON MAINTAINERS: add maintainer information for z3fold mailmap: update Josh Poimboeuf's email
2022-06-05Merge tag 'mm-nonmm-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mmLinus Torvalds7-3/+76
Pull delay-accounting update from Andrew Morton: "A single featurette for delay accounting. Delayed a bit because, unusually, it had dependencies on both the mm-stable and mm-nonmm-stable queues" * tag 'mm-nonmm-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: delayacct: track delays from write-protect copy
2022-06-05bluetooth: don't use bitmaps for random flag accessesLinus Torvalds5-39/+27
The bluetooth code uses our bitmap infrastructure for the two bits (!) of connection setup flags, and in the process causes odd problems when it converts between a bitmap and just the regular values of said bits. It's completely pointless to do things like bitmap_to_arr32() to convert a bitmap into a u32. It shoudln't have been a bitmap in the first place. The reason to use bitmaps is if you have arbitrary number of bits you want to manage (not two!), or if you rely on the atomicity guarantees of the bitmap setting and clearing. The code could use an "atomic_t" and use "atomic_or/andnot()" to set and clear the bit values, but considering that it then copies the bitmaps around with "bitmap_to_arr32()" and friends, there clearly cannot be a lot of atomicity requirements. So just use a regular integer. In the process, this avoids the warnings about erroneous use of bitmap_from_u64() which were triggered on 32-bit architectures when conversion from a u64 would access two words (and, surprise, surprise, only one word is needed - and indeed overkill - for a 2-bit bitmap). That was always problematic, but the compiler seems to notice it and warn about the invalid pattern only after commit 0a97953fd221 ("lib: add bitmap_{from,to}_arr64") changed the exact implementation details of 'bitmap_from_u64()', as reported by Sudip Mukherjee and Stephen Rothwell. Fixes: fe92ee6425a2 ("Bluetooth: hci_core: Rework hci_conn_params flags") Link: https://lore.kernel.org/all/YpyJ9qTNHJzz0FHY@debian/ Link: https://lore.kernel.org/all/20220606080631.0c3014f2@canb.auug.org.au/ Link: https://lore.kernel.org/all/20220605162537.1604762-1-yury.norov@gmail.com/ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Reviewed-by: Yury Norov <yury.norov@gmail.com> Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-06-05fix the breakage in close_fd_get_file() calling conventions changeAl Viro3-6/+4
It used to grab an extra reference to struct file rather than just transferring to caller the one it had removed from descriptor table. New variant doesn't, and callers need to be adjusted. Reported-and-tested-by: syzbot+47dd250f527cb7bebf24@syzkaller.appspotmail.com Fixes: 6319194ec57b ("Unify the primitives for file descriptor closing") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-06-05Merge tag 'x86-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds3-6/+115
Pull x86 SGX fix from Thomas Gleixner: "A single fix for x86/SGX to prevent that memory which is allocated for an SGX enclave is accounted to the wrong memory control group" * tag 'x86-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sgx: Set active memcg prior to shmem allocation
2022-06-05Merge tag 'x86-mm-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-4/+4
Pull x86 mm cleanup from Thomas Gleixner: "Use PAGE_ALIGNED() instead of open coding it in the x86/mm code" * tag 'x86-mm-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Use PAGE_ALIGNED(x) instead of IS_ALIGNED(x, PAGE_SIZE)
2022-06-05Merge tag 'x86-microcode-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds3-112/+20
Pull x86 microcode updates from Thomas Gleixner: - Disable late microcode loading by default. Unless the HW people get their act together and provide a required minimum version in the microcode header for making a halfways informed decision its just lottery and broken. - Warn and taint the kernel when microcode is loaded late - Remove the old unused microcode loader interface - Remove a redundant perf callback from the microcode loader * tag 'x86-microcode-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode: Remove unnecessary perf callback x86/microcode: Taint and warn on late loading x86/microcode: Default-disable late loading x86/microcode: Rip out the OLD_INTERFACE
2022-06-05Merge tag 'x86-cleanups-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds5-71/+66
Pull x86 cleanups from Thomas Gleixner: "A set of small x86 cleanups: - Remove unused headers in the IDT code - Kconfig indendation and comment fixes - Fix all 'the the' typos in one go instead of waiting for bots to fix one at a time" * tag 'x86-cleanups-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Fix all occurences of the "the the" typo x86/idt: Remove unused headers x86/Kconfig: Fix indentation of arch/x86/Kconfig.debug x86/Kconfig: Fix indentation and add endif comments to arch/x86/Kconfig
2022-06-05Merge tag 'x86-boot-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-3/+3
Pull x86 boot update from Thomas Gleixner: "Use strlcpy() instead of strscpy() in arch_setup()" * tag 'x86-boot-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/setup: Use strscpy() to replace deprecated strlcpy()
2022-06-05Merge tag 'timers-core-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds18-98/+22
Pull clockevent/clocksource updates from Thomas Gleixner: - Device tree bindings for MT8186 - Tell the kernel that the RISC-V SBI timer stops in deeper power states - Make device tree parsing in sp804 more robust - Dead code removal and tiny fixes here and there - Add the missing SPDX identifiers * tag 'timers-core-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/oxnas-rps: Fix irq_of_parse_and_map() return value clocksource/drivers/timer-ti-dm: Remove unnecessary NULL check clocksource/drivers/timer-sun5i: Convert to SPDX identifier clocksource/drivers/timer-sun4i: Convert to SPDX identifier clocksource/drivers/pistachio: Convert to SPDX identifier clocksource/drivers/orion: Convert to SPDX identifier clocksource/drivers/lpc32xx: Convert to SPDX identifier clocksource/drivers/digicolor: Convert to SPDX identifier clocksource/drivers/armada-370-xp: Convert to SPDX identifier clocksource/drivers/mips-gic-timer: Convert to SPDX identifier clocksource/drivers/jcore: Convert to SPDX identifier clocksource/drivers/bcm_kona: Convert to SPDX identifier clocksource/drivers/sp804: Avoid error on multiple instances clocksource/drivers/riscv: Events are stopped during CPU suspend clocksource/drivers/ixp4xx: Drop boardfile probe path dt-bindings: timer: Add compatible for Mediatek MT8186
2022-06-05Merge tag 'sched-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-1/+1
Pull scheduler fix from Thomas Gleixner: "Fix the fallout of sysctl code move which placed the init function wrong" * tag 'sched-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/autogroup: Fix sysctl move
2022-06-05Merge tag 'perf-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds2-2/+1
Pull perf fixes from Thomas Gleixner: - Make the ICL event constraints match reality - Remove a unused local variable * tag 'perf-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Remove unused local variable perf/x86/intel: Fix event constraints for ICL
2022-06-05Merge tag 'perf-core-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-6/+6
Pull perf fixlet from Thomas Gleixner: "Trivial indentation fix in Kconfig" * tag 'perf-core-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/Kconfig: Fix indentation in the Kconfig file
2022-06-05Merge tag 'objtool-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds9-13/+24
Pull objtool fixes from Thomas Gleixner: - Handle __ubsan_handle_builtin_unreachable() correctly and treat it as noreturn - Allow architectures to select uaccess validation - Use the non-instrumented bit test for test_cpu_has() to prevent escape from non-instrumentable regions - Use arch_ prefixed atomics for JUMP_LABEL=n builds to prevent escape from non-instrumentable regions - Mark a few tiny inline as __always_inline to prevent GCC from bringing them out of line and instrumenting them - Mark the empty stub context_tracking_enabled() as always inline as GCC brings them out of line and instruments the empty shell - Annotate ex_handler_msr_mce() as dead end * tag 'objtool-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/extable: Annotate ex_handler_msr_mce() as a dead end context_tracking: Always inline empty stubs x86: Always inline on_thread_stack() and current_top_of_stack() jump_label,noinstr: Avoid instrumentation for JUMP_LABEL=n builds x86/cpu: Elide KCSAN for cpu_has() and friends objtool: Mark __ubsan_handle_builtin_unreachable() as noreturn objtool: Add CONFIG_HAVE_UACCESS_VALIDATION
2022-06-05Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds80-465/+728
Pull more SCSI updates from James Bottomley: "Mostly small bug fixes plus other trivial updates. The major change of note is moving ufs out of scsi and a minor update to lpfc vmid handling" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits) scsi: qla2xxx: Remove unused 'ql_dm_tgt_ex_pct' parameter scsi: qla2xxx: Remove setting of 'req' and 'rsp' parameters scsi: mpi3mr: Fix kernel-doc scsi: lpfc: Add support for ATTO Fibre Channel devices scsi: core: Return BLK_STS_TRANSPORT for ALUA transitioning scsi: sd_zbc: Prevent zone information memory leak scsi: sd: Fix potential NULL pointer dereference scsi: mpi3mr: Rework mrioc->bsg_device model to fix warnings scsi: myrb: Fix up null pointer access on myrb_cleanup() scsi: core: Unexport scsi_bus_type scsi: sd: Don't call blk_cleanup_disk() in sd_probe() scsi: ufs: ufshcd: Delete unnecessary NULL check scsi: isci: Fix typo in comment scsi: pmcraid: Fix typo in comment scsi: smartpqi: Fix typo in comment scsi: qedf: Fix typo in comment scsi: esas2r: Fix typo in comment scsi: storvsc: Fix typo in comment scsi: ufs: Split the drivers/scsi/ufs directory scsi: qla1280: Remove redundant variable ...
2022-06-05Merge tag 'hte/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linuxLinus Torvalds24-37/+2930
Pull hardware timestamping subsystem from Thierry Reding: "This contains the new HTE (hardware timestamping engine) subsystem that has been in the works for a couple of months now. The infrastructure provided allows for drivers to register as hardware timestamp providers, while consumers will be able to request events that they are interested in (such as GPIOs and IRQs) to be timestamped by the hardware providers. Note that this currently supports only one provider, but there seems to be enough interest in this functionality and we expect to see more drivers added once this is merged" [ Linus Walleij mentions the Intel PMC in the Elkhart and Tiger Lake platforms as another future timestamp provider ] * tag 'hte/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt-bindings: timestamp: Correct id path dt-bindings: Renamed hte directory to timestamp hte: Uninitialized variable in hte_ts_get() hte: Fix off by one in hte_push_ts_ns() hte: Fix possible use-after-free in tegra_hte_test_remove() hte: Remove unused including <linux/version.h> MAINTAINERS: Add HTE Subsystem hte: Add Tegra HTE test driver tools: gpio: Add new hardware clock type gpiolib: cdev: Add hardware timestamp clock type gpio: tegra186: Add HTE support gpiolib: Add HTE support dt-bindings: Add HTE bindings hte: Add Tegra194 HTE kernel provider drivers: Add hardware timestamp engine (HTE) subsystem Documentation: Add HTE subsystem guide
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.