| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
During S4 retore flow, quickspi device was resetted by driver and state
was changed to RESETTED. It is needed to be change to ENABLED state
after S4 re-initialization finished, otherwise, device will run in wrong
state and HID input data will be dropped.
Signed-off-by: Even Xu <even.xu@intel.com>
Fixes: 6912aaf3fd24 ("HID: intel-thc-hid: intel-quickspi: Add PM implementation")
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
There is a spelling mistake in a dev_err_once message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
When a hid-steam device is removed it must clean up the client_hdev used for
intercepting hidraw access. This can lead to scheduling deferred work to
reattach the input device. Though the cleanup cancels the deferred work, this
was done before the client_hdev itself is cleaned up, so it gets rescheduled.
This patch fixes the ordering to make sure the deferred work is properly
canceled.
Reported-by: syzbot+0154da2d403396b2bd59@syzkaller.appspotmail.com
Fixes: 79504249d7e2 ("HID: hid-steam: Move hidraw input (un)registering to work")
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
There is a spelling mistake in a literal string. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Syzkaller reports a NULL pointer dereference issue in input_event().
BUG: KASAN: null-ptr-deref in instrument_atomic_read include/linux/instrumented.h:68 [inline]
BUG: KASAN: null-ptr-deref in _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
BUG: KASAN: null-ptr-deref in is_event_supported drivers/input/input.c:67 [inline]
BUG: KASAN: null-ptr-deref in input_event+0x42/0xa0 drivers/input/input.c:395
Read of size 8 at addr 0000000000000028 by task syz-executor199/2949
CPU: 0 UID: 0 PID: 2949 Comm: syz-executor199 Not tainted 6.13.0-rc4-syzkaller-00076-gf097a36ef88d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
kasan_report+0xd9/0x110 mm/kasan/report.c:602
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189
instrument_atomic_read include/linux/instrumented.h:68 [inline]
_test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
is_event_supported drivers/input/input.c:67 [inline]
input_event+0x42/0xa0 drivers/input/input.c:395
input_report_key include/linux/input.h:439 [inline]
key_down drivers/hid/hid-appleir.c:159 [inline]
appleir_raw_event+0x3e5/0x5e0 drivers/hid/hid-appleir.c:232
__hid_input_report.constprop.0+0x312/0x440 drivers/hid/hid-core.c:2111
hid_ctrl+0x49f/0x550 drivers/hid/usbhid/hid-core.c:484
__usb_hcd_giveback_urb+0x389/0x6e0 drivers/usb/core/hcd.c:1650
usb_hcd_giveback_urb+0x396/0x450 drivers/usb/core/hcd.c:1734
dummy_timer+0x17f7/0x3960 drivers/usb/gadget/udc/dummy_hcd.c:1993
__run_hrtimer kernel/time/hrtimer.c:1739 [inline]
__hrtimer_run_queues+0x20a/0xae0 kernel/time/hrtimer.c:1803
hrtimer_run_softirq+0x17d/0x350 kernel/time/hrtimer.c:1820
handle_softirqs+0x206/0x8d0 kernel/softirq.c:561
__do_softirq kernel/softirq.c:595 [inline]
invoke_softirq kernel/softirq.c:435 [inline]
__irq_exit_rcu+0xfa/0x160 kernel/softirq.c:662
irq_exit_rcu+0x9/0x30 kernel/softirq.c:678
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline]
sysvec_apic_timer_interrupt+0x90/0xb0 arch/x86/kernel/apic/apic.c:1049
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702
__mod_timer+0x8f6/0xdc0 kernel/time/timer.c:1185
add_timer+0x62/0x90 kernel/time/timer.c:1295
schedule_timeout+0x11f/0x280 kernel/time/sleep_timeout.c:98
usbhid_wait_io+0x1c7/0x380 drivers/hid/usbhid/hid-core.c:645
usbhid_init_reports+0x19f/0x390 drivers/hid/usbhid/hid-core.c:784
hiddev_ioctl+0x1133/0x15b0 drivers/hid/usbhid/hiddev.c:794
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl fs/ioctl.c:892 [inline]
__x64_sys_ioctl+0x190/0x200 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
This happens due to the malformed report items sent by the emulated device
which results in a report, that has no fields, being added to the report list.
Due to this appleir_input_configured() is never called, hidinput_connect()
fails which results in the HID_CLAIMED_INPUT flag is not being set. However,
it does not make appleir_probe() fail and lets the event callback to be
called without the associated input device.
Thus, add a check for the HID_CLAIMED_INPUT flag and leave the event hook
early if the driver didn't claim any input_dev for some reason. Moreover,
some other hid drivers accessing input_dev in their event callbacks do have
similar checks, too.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 9a4a5574ce42 ("HID: appleir: add support for Apple ir devices")
Cc: stable@vger.kernel.org
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Remove the fixup to make the Omoton KB066's F6 key F6 when not holding
Fn. That was really just a hack to allow typing F6 in fnmode>0, and it
didn't fix any of the other F keys that were likewise untypable in
fnmode>0. Instead, because the Omoton's Fn key is entirely internal to
the keyboard, completely disable Fn key translation when an Omoton is
detected, which will prevent the hid-apple driver from interfering with
the keyboard's built-in Fn key handling. All of the F keys, including
F6, are then typable when Fn is held.
The Omoton KB066 and the Apple A1255 both have HID product code
05ac:022c. The self-reported name of every original A1255 when they left
the factory was "Apple Wireless Keyboard". By default, Mac OS changes
the name to "<username>'s keyboard" when pairing with the keyboard, but
Mac OS allows the user to set the internal name of Apple keyboards to
anything they like. The Omoton KB066's name, on the other hand, is not
configurable: It is always "Bluetooth Keyboard". Because that name is so
generic that a user might conceivably use the same name for a real Apple
keyboard, detect Omoton keyboards based on both having that exact name
and having HID product code 022c.
Fixes: 819083cb6eed ("HID: apple: fix up the F6 key on the Omoton KB066 keyboard")
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
We have two places to print "failed to set a report to ...",
use "get a report from" instead of "set a report to", it makes
people who knows less about the module to know where the error
happened.
Before:
i2c_hid_acpi i2c-FTSC1000:00: failed to set a report to device: -11
After:
i2c_hid_acpi i2c-FTSC1000:00: failed to get a report from device: -11
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The system can experience a random crash a few minutes after the driver is
removed. This issue occurs due to improper handling of memory freeing in
the ishtp_hid_remove() function.
The function currently frees the `driver_data` directly within the loop
that destroys the HID devices, which can lead to accessing freed memory.
Specifically, `hid_destroy_device()` uses `driver_data` when it calls
`hid_ishtp_set_feature()` to power off the sensor, so freeing
`driver_data` beforehand can result in accessing invalid memory.
This patch resolves the issue by storing the `driver_data` in a temporary
variable before calling `hid_destroy_device()`, and then freeing the
`driver_data` after the device is destroyed.
Fixes: 0b28cb4bcb17 ("HID: intel-ish-hid: ISH HID client driver")
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
During the `rmmod` operation for the `intel_ishtp_hid` driver, a
use-after-free issue can occur in the hid_ishtp_cl_remove() function.
The function hid_ishtp_cl_deinit() is called before ishtp_hid_remove(),
which can lead to accessing freed memory or resources during the
removal process.
Call Trace:
? ishtp_cl_send+0x168/0x220 [intel_ishtp]
? hid_output_report+0xe3/0x150 [hid]
hid_ishtp_set_feature+0xb5/0x120 [intel_ishtp_hid]
ishtp_hid_request+0x7b/0xb0 [intel_ishtp_hid]
hid_hw_request+0x1f/0x40 [hid]
sensor_hub_set_feature+0x11f/0x190 [hid_sensor_hub]
_hid_sensor_power_state+0x147/0x1e0 [hid_sensor_trigger]
hid_sensor_runtime_resume+0x22/0x30 [hid_sensor_trigger]
sensor_hub_remove+0xa8/0xe0 [hid_sensor_hub]
hid_device_remove+0x49/0xb0 [hid]
hid_destroy_device+0x6f/0x90 [hid]
ishtp_hid_remove+0x42/0x70 [intel_ishtp_hid]
hid_ishtp_cl_remove+0x6b/0xb0 [intel_ishtp_hid]
ishtp_cl_device_remove+0x4a/0x60 [intel_ishtp]
...
Additionally, ishtp_hid_remove() is a HID level power off, which should
occur before the ISHTP level disconnect.
This patch resolves the issue by reordering the calls in
hid_ishtp_cl_remove(). The function ishtp_hid_remove() is now
called before hid_ishtp_cl_deinit().
Fixes: f645a90e8ff7 ("HID: intel-ish-hid: ishtp-hid-client: use helper functions for connection")
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
As reported by the kernel test robot, the following warning occurs:
>> drivers/hid/hid-google-hammer.c:261:36: warning: 'cbas_ec_acpi_ids' defined but not used [-Wunused-const-variable=]
261 | static const struct acpi_device_id cbas_ec_acpi_ids[] = {
| ^~~~~~~~~~~~~~~~
The 'cbas_ec_acpi_ids' array is only used when CONFIG_ACPI is enabled.
Wrapping its definition and 'MODULE_DEVICE_TABLE' in '#ifdef CONFIG_ACPI'
prevents a compiler warning when ACPI is disabled.
Fixes: eb1aac4c8744f75 ("HID: google: add support tablet mode switch for Whiskers")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501201141.jctFH5eB-lkp@intel.com/
Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This fixes the button event map to match the 3-button recommendation
as well as the redundant 'z' in the button map events for the Sega
MD/Gen 6 Button.
Signed-off-by: Ryan McClelland <rymcclel@gmail.com>
Reviewed-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
corsair_void_process_receiver can be called from an interrupt context,
locking battery_mutex in it was causing a kernel panic.
Fix it by moving the critical section into its own work, sharing this
work with battery_add_work and battery_remove_work to remove the need
for any locking
Closes: https://bugzilla.suse.com/show_bug.cgi?id=1236843
Fixes: 6ea2a6fd3872 ("HID: corsair-void: Add Corsair Void headset family driver")
Cc: stable@vger.kernel.org
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Lockdep reported that, as steam_do_deck_input_event is called from
steam_raw_event inside of an IRQ context, it can lead to issues if that IRQ
occurs while the work to be cancelled is running. By using cancel_delayed_work,
this issue can be avoided. The exact ordering of the work and the event
processing is not super important, so this is safe.
Fixes: cd438e57dd05 ("HID: hid-steam: Add gamepad-only mode switched to by holding options")
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Due to an interplay between locking in the input and hid transport subsystems,
attempting to register or deregister the relevant input devices during the
hidraw open/close events can lead to a lock ordering issue. Though this
shouldn't cause a deadlock, this commit moves the input device manipulation to
deferred work to sidestep the issue.
Fixes: 385a4886778f6 ("HID: steam: remove input device when a hid client is running.")
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Syzbot[1] has detected a stack-out-of-bounds read of the ep_addr array from
hid-thrustmaster driver. This array is passed to usb_check_int_endpoints
function from usb.c core driver, which executes a for loop that iterates
over the elements of the passed array. Not finding a null element at the end of
the array, it tries to read the next, non-existent element, crashing the kernel.
To fix this, a 0 element was added at the end of the array to break the for
loop.
[1] https://syzkaller.appspot.com/bug?extid=9c9179ac46169c56c1ad
Reported-by: syzbot+9c9179ac46169c56c1ad@syzkaller.appspotmail.com
Fixes: 50420d7c79c3 ("HID: hid-thrustmaster: Fix warning in thrustmaster_probe by adding endpoint check")
Signed-off-by: Túlio Fernandes <tuliomf09@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The Omoton KB066 is an Apple A1255 keyboard clone (HID product code
05ac:022c). On both keyboards, the F6 key becomes Num Lock when the Fn
key is held. But unlike its Apple exemplar, when the Omoton's F6 key is
pressed without Fn, it sends the usage code 0xC0301 from the reserved
section of the consumer page instead of the standard F6 usage code
0x7003F from the keyboard page. The nonstandard code is translated to
KEY_UNKNOWN and becomes useless on Linux. The Omoton KB066 is a pretty
popular keyboard, judging from its 29,058 reviews on Amazon at time of
writing, so let's account for its quirk to make it more usable.
By the way, it would be nice if we could automatically set fnmode to 0
for Omoton keyboards because they handle the Fn key internally and the
kernel's Fn key handling creates undesirable side effects such as making
F1 and F2 always Brightness Up and Brightness Down in fnmode=1 (the
default) or always F1 and F2 in fnmode=2. Unfortunately I don't think
there's a way to identify Bluetooth keyboards more specifically than the
HID product code which is obviously inaccurate. Users of Omoton
keyboards will just have to set fnmode to 0 manually to get full Fn key
functionality.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Add Apple Magic Keyboard 2024 model (with USB-C port) device ID (0320)
to those recognized by the hid-apple driver. Keyboard is otherwise
compatible with the existing implementation for its earlier 2021 model.
Signed-off-by: Ievgen Vovk <YevgenVovk@ukr.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Commit 13b25489b6f8 ("kbuild: change working directory to external
module directory with M=") changed kbuild working directory of hid-bpf
sample programs to samples/hid, which broke the vmlinux path for
VMLINUX_BTF, as the Makefiles assume the current work directory to be
the kernel output directory and use a relative path (i.e., ./vmlinux):
Makefile:173: *** Cannot find a vmlinux for VMLINUX_BTF at any of " /path/to/linux/samples/hid/vmlinux", build the kernel or set VMLINUX_BTF or VMLINUX_H variable. Stop.
Correctly refer to the kernel output directory using $(objtree).
Fixes: 13b25489b6f8 ("kbuild: change working directory to external module directory with M=")
Tested-by: Ruowen Qin <ruqin@redhat.com>
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jinghao Jia <jinghao7@illinois.edu>
Link: https://patch.msgid.link/20250203085506.220297-4-jinghao7@illinois.edu
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Commit 5a6ea7022ff4 ("samples/bpf: Remove unnecessary -I flags from
libbpf EXTRA_CFLAGS") fixed the build error caused by redundant include
path for samples/bpf, but not samples/hid.
Apply the same fix on samples/hid as well.
Fixes: 13b25489b6f8 ("kbuild: change working directory to external module directory with M=")
Tested-by: Ruowen Qin <ruqin@redhat.com>
Signed-off-by: Jinghao Jia <jinghao7@illinois.edu>
Link: https://patch.msgid.link/20250203085506.220297-2-jinghao7@illinois.edu
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Newer model R3* Topre Realforce keyboards share an issue with their older
R2 cousins where a report descriptor fixup is needed in order for n-key
rollover to work correctly, otherwise only 6-key rollover is available.
This patch adds some new hardware IDs for the R3S 87-key keyboard and
makes amendments to the existing hid-topre driver in order to change the
correct byte in the new model.
Signed-off-by: Daniel Brackenbury <daniel.brackenbury@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Add device IDs of Panther Lake-H and Panther Lake-P into ishtp support
list.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
devm_kasprintf() can return a NULL pointer on failure,but this
returned value in mt_input_configured() is not checked.
Add NULL check in mt_input_configured(), to handle kernel NULL
pointer dereference error.
Fixes: 479439463529 ("HID: multitouch: Correct devm device reference for hidinput input_dev name")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
devm_kasprintf() can return a NULL pointer on failure,but this
returned value in winwing_init_led() is not checked.
Add NULL check in winwing_init_led(), to handle kernel NULL
pointer dereference error.
Fixes: 266c990debad ("HID: Add WinWing Orion2 throttle support")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
When lizard mode is disabled, there were two issues:
1. Switching between gamepad mode and desktop mode still functioned, even
though desktop mode did not. This lead to the ability to "break" gamepad mode
by holding down the Options key even while lizard mode is disabled
2. If you were in desktop mode when lizard mode is disabled, you would
immediately enter this faulty mode.
This patch properly disables the ability to switch between gamepad mode and the
faulty desktop mode by holding the Options key, as well as effectively removing
the faulty mode by bypassing the early returns if lizard mode is disabled.
Reported-by: Eugeny Shcheglov <eugenyshcheglov@gmail.com>
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The HP 5MP Camera (USB ID 0408:5473) reports a HID sensor interface that
is not actually implemented. Attempting to access this non-functional
sensor via iio_info causes system hangs as runtime PM tries to wake up
an unresponsive sensor.
[453] hid-sensor-hub 0003:0408:5473.0003: Report latency attributes: ffffffff:ffffffff
[453] hid-sensor-hub 0003:0408:5473.0003: common attributes: 5:1, 2:1, 3:1 ffffffff:ffffffff
Add this device to the HID ignore list since the sensor interface is
non-functional by design and should not be exposed to userspace.
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
In drivers/hid/, most drivers depend on CONFIG_HID, while a couple of the
drivers in subdirectories instead depend on CONFIG_HID_SUPPORT and use
'select HID'. With the newly added INTEL_THC_HID, this causes a build
warning for a circular dependency:
WARNING: unmet direct dependencies detected for HID
Depends on [m]: HID_SUPPORT [=y] && INPUT [=m]
Selected by [y]:
- INTEL_THC_HID [=y] && HID_SUPPORT [=y] && X86_64 [=y] && PCI [=y] && ACPI [=y]
WARNING: unmet direct dependencies detected for INPUT_FF_MEMLESS
Depends on [m]: INPUT [=m]
Selected by [y]:
- HID_MICROSOFT [=y] && HID_SUPPORT [=y] && HID [=y]
- GREENASIA_FF [=y] && HID_SUPPORT [=y] && HID [=y] && HID_GREENASIA [=y]
- HID_WIIMOTE [=y] && HID_SUPPORT [=y] && HID [=y] && LEDS_CLASS [=y]
- ZEROPLUS_FF [=y] && HID_SUPPORT [=y] && HID [=y] && HID_ZEROPLUS [=y]
Selected by [m]:
- HID_ACRUX_FF [=y] && HID_SUPPORT [=y] && HID [=y] && HID_ACRUX [=m]
- HID_EMS_FF [=m] && HID_SUPPORT [=y] && HID [=y]
- HID_GOOGLE_STADIA_FF [=m] && HID_SUPPORT [=y] && HID [=y]
- PANTHERLORD_FF [=y] && HID_SUPPORT [=y] && HID [=y] && HID_PANTHERLORD [=m]
It's better to be consistent and always use 'depends on HID' for HID
drivers. The notable exception here is USB_KBD/USB_MOUSE, which are
alternative implementations that do not depend on the HID subsystem.
Do this by extending the "if HID" section below, which means that a few
of the duplicate "depends on HID" and "depends on INPUT" statements
can be removed in the process.
Fixes: 1b2d05384c29 ("HID: intel-thc-hid: Add basic THC driver skeleton")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
A previous patch tried to fix this link failure:
x86_64-linux-ld: drivers/hid/hid-lenovo.o: in function `lenovo_raw_event':
hid-lenovo.c:(.text+0x22c): undefined reference to `platform_profile_cycle'
but got it wrong in three ways:
- the link failure still exists with CONFIG_ACPI_PLATFORM_PROFILE=m
when hid-lenovo is built-in
- There is no way to manually enable CONFIG_ACPI_PLATFORM_PROFILE, as
it is intended to be selected by its users.
Remove the broken #if check again and instead select the symbol like
the other users do. This requires adding a dependency on CONFIG_ACPI.
Fixes: 52e7d1f7c2fd ("HID: lenovo: Fix undefined platform_profile_cycle in ThinkPad X12 keyboard patch")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The ISH driver performs a clock sync with the firmware once at system
startup and then every 20 seconds. If a firmware reset occurs right
after a clock sync, the driver would wait 20 seconds before performing
another clock sync with the firmware. This is particularly problematic
with the introduction of the "load firmware from host" feature, where
the driver performs a clock sync with the bootloader and then has to
wait 20 seconds before syncing with the main firmware.
This patch clears prev_sync immediately upon receiving an IPC reset,
so that the main firmware and driver will perform a clock sync
immediately after completing the IPC handshake.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The timestamps in the Firmware log and HID sensor samples are incorrect.
They show 1970-01-01 because the current IPC driver only uses the first
8 bytes of bootup time when synchronizing time with the firmware. The
firmware converts the bootup time to UTC time, which results in the
display of 1970-01-01.
In write_ipc_from_queue(), when sending the MNG_SYNC_FW_CLOCK message,
the clock is updated according to the definition of ipc_time_update_msg.
However, in _ish_sync_fw_clock(), the message length is specified as the
size of uint64_t when building the doorbell. As a result, the firmware
only receives the first 8 bytes of struct ipc_time_update_msg.
This patch corrects the length in the doorbell to ensure the entire
ipc_time_update_msg is sent, fixing the timestamp issue.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
power_supply_config psy_cfg was missing its initialiser, add it in.
Fixes: 6ea2a6fd3872 ("HID: corsair-void: Add Corsair Void headset family driver")
Cc: stable@vger.kernel.org
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The cancel_delayed_work_sync() call was missed, causing a use-after-free
in corsair_void_remove().
Reported-by: yan kang <kangyan91@outlook.com>
Reported-by: yue sun <samsun1006219@gmail.com>
Closes: https://lore.kernel.org/all/SY8P300MB042106286A2536707D2FB736A1E42@SY8P300MB0421.AUSP300.PROD.OUTLOOK.COM/
Closes: https://lore.kernel.org/all/SY8P300MB0421872E0AE934C9616FA61EA1E42@SY8P300MB0421.AUSP300.PROD.OUTLOOK.COM/
Fixes: 6ea2a6fd3872 ("HID: corsair-void: Add Corsair Void headset family driver")
Cc: stable@vger.kernel.org
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Pull HID updates from Jiri Kosina:
- newly added support for Intel Touch Host Controller (Even Xu, Xinpeng
Sun)
- hid-core fix for long-standing syzbot-reported cornercase of
Resolution Multiplier not being present in any of the Logical
Collections in the device HID report descriptor (Alan Stern)
- improvement of behavior for non-standard LED brightness values for
Wacom driver (Jason Gerecke)
- PCI Wacom device support (depends on Intel THC support) (Even Xu)
- SteelSeries Arctis 9 support (Christian Mayer)
- constification of 'struct bin_attribute' in various HID driver
(Thomas Weißschuh)
- other assorted code cleanups / fixes and device ID additions
* tag 'hid-for-linus-2025012001' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (63 commits)
HID: hid-asus: Disable OOBE mode on the ProArt P16
HID: steelseries: remove unnecessary return
HID: steelseries: export model and manufacturer
HID: steelseries: export charging state for the SteelSeries Arctis 9 headset
HID: steelseries: add SteelSeries Arctis 9 support
HID: steelseries: preparation for adding SteelSeries Arctis 9 support
HID: intel-thc-hid: fix build errors in um mode
HID: intel-thc-hid: intel-quicki2c: fix potential memory corruption
HID: intel-thc-hid: intel-thc: Fix error code in thc_i2c_subip_init()
HID: lenovo: Fix undefined platform_profile_cycle in ThinkPad X12 keyboard patch
HID: uclogic: make const read-only array touch_ring_model_params_buf static
HID: hid-steam: Make sure rumble work is canceled on removal
HID: Wacom: Add PCI Wacom device support
HID: intel-thc-hid: intel-quicki2c: Add PM implementation
HID: intel-thc-hid: intel-quicki2c: Complete THC QuickI2C driver
HID: intel-thc-hid: intel-quicki2c: Add HIDI2C protocol implementation
HID: intel-thc-hid: intel-quicki2c: Add THC QuickI2C ACPI interfaces
HID: intel-thc-hid: intel-quicki2c: Add THC QuickI2C driver hid layer
HID: intel-thc-hid: intel-quicki2c: Add THC QuickI2C driver skeleton
HID: intel-thc-hid: intel-quickspi: Add PM implementation
...
|
|
Pull thermal control updates from Rafael Wysocki:
"These add support for Intel Panther Lake processors in multiple
places, modify Intel thermal drivers to stop selecting the user space
thermal governor which is not necessary for them to work any more and
clean up the thermal core somewhat:
- Add support for Panther Lake processors in multiple places (Zhang
Rui, Srinivas Pandruvada)
- Remove explicit user_space governor selection from Intel thermal
drivers (Srinivas Pandruvada)
- Rename a few things and relocate a comment in the thermal subsystem
(Rafael Wysocki)"
* tag 'thermal-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Rename function argument related to trip crossing
thermal: gov_bang_bang: Relocate regulation logic description
thermal: core: Rename callback functions in two governors
thermal: intel: Fix compile issue when CONFIG_NET is not defined
thermal: intel: int340x: Panther Lake power floor and workload hint support
thermal: intel: int340x: Panther Lake DLVR support
thermal: intel: Remove explicit user_space governor selection
ACPI: DPTF: Support Panther Lake
thermal: intel: int340x: processor: Enable MMIO RAPL for Panther Lake
powercap: intel_rapl: Add support for Panther Lake platform
|
|
Pull ACPI updates from Rafael Wysocki:
"The most significant change here is replacing msleep() in
acpi_os_sleep() with usleep_range() to reduce spurious sleep time due
to timer inaccuracy which may spectacularly reduce the duration of
system suspend and resume transitions on some systems.
All of the other changes fall into the fixes and cleanups category
this time.
Specifics:
- Use usleep_range() instead of msleep() in acpi_os_sleep() to reduce
excessive delays due to timer inaccuracy, mostly affecting system
suspend and resume (Rafael Wysocki)
- Use str_enabled_disabled() string helpers in the ACPI tables
parsing code to make it easier to follow (Sunil V L)
- Update device properties parsing on systems using ACPI so that data
firmware nodes resulting from _DSD evaluation are treated as
available in firmware nodes walks (Sakari Ailus)
- Fix missing guid_t declaration in linux/prmt.h (Robert Richter)
- Update the GHES handling code to follow the global panic= policy
instead of overriding it by force-rebooting the system after a
fatal HW error has been reported (Borislav Petkov)
- Update messages printed by the ACPI battery driver to always refer
to driver extensions as "hooks" to avoid confusion with similar
functionality in the power supply subsystem in the future (Thomas
Weißschuh)
- Fix .probe() error path cleanup in the ACPI fan driver to avoid
memory leaks (Joe Hattori)
- Constify 'struct bin_attribute' in some places in the ACPI
subsystem and mark it as __ro_after_init in one place to prevent
binary blob attributes from being updated (Thomas Weißschuh)
- Add empty stubs for several ACPI-related symbols so that they can
be used when CONFIG_ACPI is unset and use them for removing
unnecessary conditional compilation from the ipu-bridge driver
(Ricardo Ribalda)"
* tag 'acpi-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
APEI: GHES: Have GHES honor the panic= setting
ACPI: PRM: Fix missing guid_t declaration in linux/prmt.h
ACPI: tables: Use string choice helpers
ACPI: property: Consider data nodes as being available
media: ipu-bridge: Remove unneeded conditional compilations
ACPI: bus: implement acpi_device_hid when !ACPI
ACPI: bus: implement for_each_acpi_consumer_dev when !ACPI
ACPI: header: implement acpi_device_handle when !ACPI
ACPI: bus: implement acpi_get_physical_device_location when !ACPI
ACPI: bus: implement for_each_acpi_dev_match when !ACPI
ACPI: bus: change the prototype for acpi_get_physical_device_location
ACPI: fan: cleanup resources in the error path of .probe()
ACPI: battery: Rename extensions to hook in messages
ACPI: OSL: Use usleep_range() in acpi_os_sleep()
ACPI: sysfs: Constify 'struct bin_attribute'
ACPI: BGRT: Constify 'struct bin_attribute'
ACPI: BGRT: Mark bin_attribute as __ro_after_init
|
|
Pull power management updates from Rafael Wysocki:
"The majority of changes here are cpufreq updates which are dominated
by amd-pstate driver changes, like in the previous cycle. Moreover,
changes related to amd-pstate are also the majority of cpupower
utility updates.
Included are some pieces of new hardware support, like the addition of
Clearwater Forest processors support to intel_idle, new cpufreq driver
for Airoha SoCs, and Apple cpufreq driver extensions to support more
SoCs. The intel_pstate driver is also extended to be able to support
new platforms by using ACPI CPPC to compute scaling factors between
HWP performance states and frequency.
The rest is mostly fixes and cleanups in assorted pieces of power
management code.
Specifics:
- Use str_enable_disable()-like helpers in cpufreq (Krzysztof
Kozlowski)
- Extend the Apple cpufreq driver to support more SoCs (Hector
Martin, Nick Chan)
- Add new cpufreq driver for Airoha SoCs (Christian Marangi)
- Fix using cpufreq-dt as module (Andreas Kemnade)
- Minor fixes for Sparc, SCMI, and Qcom cpufreq drivers (Ethan Carter
Edwards, Sibi Sankar, Manivannan Sadhasivam)
- Fix the maximum supported frequency computation in the ACPI cpufreq
driver to avoid relying on unfounded assumptions (Gautham Shenoy)
- Fix an amd-pstate driver regression with preferred core rankings
not being used (Mario Limonciello)
- Fix a precision issue with frequency calculation in the amd-pstate
driver (Naresh Solanki)
- Add ftrace event to the amd-pstate driver for active mode (Mario
Limonciello)
- Set default EPP policy on Ryzen processors in amd-pstate (Mario
Limonciello)
- Clean up the amd-pstate cpufreq driver and optimize it to increase
code reuse (Mario Limonciello, Dhananjay Ugwekar)
- Use CPPC to get scaling factors between HWP performance levels and
frequency in the intel_pstate driver and make it stop using a
built-in scaling factor for Arrow Lake processors (Rafael Wysocki)
- Make intel_pstate initialize epp_policy to CPUFREQ_POLICY_UNKNOWN
for consistency with CPU offline (Christian Loehle)
- Fix superfluous updates caused by need_freq_update in the schedutil
cpufreq governor (Sultan Alsawaf)
- Allow configuring the system suspend-resume (DPM) watchdog to warn
earlier than panic (Douglas Anderson)
- Implement devm_device_init_wakeup() helper and introduce a device-
managed variant of dev_pm_set_wake_irq() (Joe Hattori, Peng Fan)
- Remove direct inclusions of 'pm_wakeup.h' which should be only
included via 'device.h' (Wolfram Sang)
- Clean up two comments in the core system-wide PM code (Rafael
Wysocki, Randy Dunlap)
- Add Clearwater Forest processor support to the intel_idle cpuidle
driver (Artem Bityutskiy)
- Clean up the Exynos devfreq driver and devfreq core (Markus
Elfring, Jeongjun Park)
- Minor cleanups and fixes for OPP (Dan Carpenter, Neil Armstrong,
Joe Hattori)
- Implement dev_pm_opp_get_bw() (Neil Armstrong)
- Expose OPP reference counting helpers for Rust (Viresh Kumar)
- Fix TSC MHz calculation in cpupower (He Rongguang)
- Add install and uninstall options to bindings Makefile and add
header changes for cpufreq.h to SWIG bindings in cpupower (John B.
Wyatt IV)
- Add missing residency header changes in cpuidle.h to SWIG bindings
in cpupower (John B. Wyatt IV)
- Add output files to .gitignore and clean them up in "make clean" in
selftests/cpufreq (Li Zhijian)
- Fix cross-compilation in cpupower Makefile (Peng Fan)
- Revise the is_valid flag handling for idle_monitor in the cpupower
utility (wangfushuai)
- Extend and clean up AMD processors support in cpupower (Mario
Limonciello)"
* tag 'pm-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (67 commits)
PM / OPP: Add reference counting helpers for Rust implementation
PM: sleep: wakeirq: Introduce device-managed variant of dev_pm_set_wake_irq()
cpufreq: Use str_enable_disable()-like helpers
cpufreq: airoha: Add EN7581 CPUFreq SMCCC driver
PM: sleep: Allow configuring the DPM watchdog to warn earlier than panic
PM: sleep: convert comment from kernel-doc to plain comment
cpufreq: ACPI: Fix max-frequency computation
pm: cpupower: Add missing residency header changes in cpuidle.h to SWIG
PM / devfreq: exynos: remove unused function parameter
OPP: OF: Fix an OF node leak in _opp_add_static_v2()
cpufreq/amd-pstate: Refactor max frequency calculation
cpufreq/amd-pstate: Fix prefcore rankings
pm: cpupower: Add header changes for cpufreq.h to SWIG bindings
cpufreq: sparc: change kzalloc to kcalloc
cpufreq: qcom: Implement clk_ops::determine_rate() for qcom_cpufreq* clocks
cpufreq: qcom: Fix qcom_cpufreq_hw_recalc_rate() to query LUT if LMh IRQ is not available
cpufreq: apple-soc: Add Apple A7-A8X SoC cpufreq support
cpufreq: apple-soc: Set fallback transition latency to APPLE_DVFS_TRANSITION_TIMEOUT
cpufreq: apple-soc: Increase cluster switch timeout to 400us
cpufreq: apple-soc: Use 32-bit read for status register
...
|
|
Pull ipmi updates from Corey Minyard:
- I'm switching to a new email address, so update that
- Minor fixes for formats and return values and missing ifdefs
- A fix for some error handling that causes a loss of messages
* tag 'for-linus-6.14-1' of https://github.com/cminyard/linux-ipmi:
MAINTAINERS: ipmi: update my email address
ipmi: ssif_bmc: Fix new request loss when bmc ready for a response
ipmi: make ipmi_destroy_user() return void
char:ipmi: Fix a not-used variable on a non-ACPI system
char:ipmi: Fix the wrong format specifier
ipmi: ipmb: Add check devm_kasprintf() returned value
|
|
Pull clk updates from Stephen Boyd:
"A pretty quiet cycle this time around. We have a bunch of new Qualcomm
clk drivers, per usual, and then a handful of drivers for other SoCs.
Then the usual pile of cleanups is fairly small data fixes or
converting DT bindings to YAML so they can be validated.
No changes to the core framework besides an OF node refcount bump that
never got decremented.
New Drivers:
- 5L35023 variant of Versa 3 clock generator
- Various Qualcomm clk controllers: IPQ CMN PLL, SM6115 LPASS, SM750
global, tcsr, rpmh, and display. X Plus GPU and global. QCS615 rpmh
and MSM8937 and MSM8940 RPM.
- Qualcomm Pongo and Taycan Alpha PLLs
- Qualcomm IPQ5424 NoC-related interconnect clks
- Renesas RZ/G3E (R9A09G047) SoC clk driver
- SAMA7D65 SoC clk driver
- Samsung Exynos990 SoC clk driver"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (159 commits)
clk: analogbits: Fix incorrect calculation of vco rate delta
clk: bcm: rpi: Add disp clock
clk: bcm: rpi: Create helper to retrieve private data
clk: bcm: rpi: Enable minimize for all firmware clocks
clk: bcm: rpi: Allow cpufreq driver to also adjust gpu clocks
clk: bcm: rpi: Add ISP to exported clocks
clk: stm32f4: support spread spectrum clock generation
clk: stm32f4: use FIELD helpers to access the PLLCFGR fields
dt-bindings: clock: st,stm32-rcc: support spread spectrum clocking
dt-bindings: clock: convert stm32 rcc bindings to json-schema
clk: Use str_enable_disable-like helpers
clk: clk-loongson2: Fix the number count of clk provider
clk: clk-loongson2: Switch to use devm_clk_hw_register_fixed_rate_parent_data()
clk: starfive: Make _clk_get become a common helper function
clk: en7523: Add clock for eMMC for EN7581
dt-bindings: clock: add ID for eMMC for EN7581
dt-bindings: clock: drop NUM_CLOCKS define for EN7581
clk: en7523: Rework clock handling for different clock numbers
clk: thead: Fix cpu2vp_clk for TH1520 AP_SUBSYS clocks
clk: thead: Add CLK_IGNORE_UNUSED to fix TH1520 boot
...
|
|
Pull i2c updates from Wolfram Sang:
"Core:
- list-based mechanisms for handling auto-detected and userspace
created clients are replaced with a flag-based approach. The
resulting code is much simpler as well as the locking.
- i2c clients now get a default debugfs dir managed by the I2C core.
Drivers don't have to maintain their own directory anymore.
Driver updates:
- xiic: atomic_transfer support
- imx-lpi2c: DMA and target mode support
- riic cleanups
- npcm: better timeout handling and more precise frequency setups
- davinci: remove unused platform_data
- at24: add new compatibles for variants from Giantec and Puya
Semiconductor (together with a new vendor prefix)"
* tag 'i2c-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (52 commits)
i2c: add kdoc for the new debugfs entry of clients
i2c: designware: Actually make use of the I2C_DW_COMMON and I2C_DW symbol namespaces
i2c: add core-managed per-client directory in debugfs
i2c: Force ELAN06FA touchpad I2C bus freq to 100KHz
i2c: riic: Add `riic_bus_barrier()` to check bus availability
i2c: riic: Use predefined macro and simplify clock tick calculation
i2c: riic: Mark riic_irqs array as const
i2c: riic: Make use of devres helper to request deasserted reset line
i2c: riic: Use GENMASK() macro for bitmask definitions
i2c: riic: Use BIT macro consistently
i2c: riic: Use local `dev` pointer in `dev_err_probe()`
i2c: riic: Use dev_err_probe in probe and riic_init_hw functions
i2c: riic: Introduce a separate variable for IRQ
i2c: amd756: Remove superfluous TODO
Revert "i2c: amd756: Fix endianness handling for word data"
i2c: i801: Add lis3lv02d for Dell Precision M6800
i2c: i801: Remove unnecessary PCI function call
i2c: core: Allocate temp client on the stack in i2c_detect
i2c: slave-eeprom: Constify 'struct bin_attribute'
i2c: imx-lpi2c: make controller available until the system enters suspend_noirq() and from resume_noirq().
...
|
|
Pull pwm updates from Uwe Kleine-König:
"This time there are very little changes for pwm. There is nothing new,
just a few maintenance cleanups.
The contributors this time around were Krzysztof Kozlowski, Mingwei
Zheng, Philipp Stanner, and Stanislav Jakubek. Thanks!"
* tag 'pwm/for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: stm32: Add check for clk_enable()
dt-bindings: pwm: Correct indentation and style in DTS example
pwm: stm32-lp: Add check for clk_enable()
dt-bindings: pwm: marvell,berlin-pwm: Convert from txt to yaml
dt-bindings: pwm: sprd,ums512-pwm: convert to YAML
pwm: Replace deprecated PCI functions
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Share a helper to convert from crypto_profile to mmc_host
- Respect quirk_max_rate for non-UHS SDIO card too
MMC host:
- Add DT bindings for the mmc-slot
- Clarify DT bindings for the mmc-controller
- bcm2835: Add support for system-wide suspend/resume PM
- dw_mmc-exynos: Add support for the exynos8895 variant
- meson-mx-sdio: Convert DT bindings to dtschema
- mtk-sd: Fixup use of two register ranges
- mtk-sd: Add support for ignoring cmd response CRC
- sdhci-esdhc-imx: enable 'SDHCI_QUIRK_NO_LED' quirk for S32G
- sdhci-msm: Correctly set the load for the regulator
- sdhci-msm: Convert to use custom crypto profile
- sdhci-of-at91: Add support for the microchip sama7d65 variant"
* tag 'mmc-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (25 commits)
mmc: sdhci-msm: Correctly set the load for the regulator
mmc: hi3798mv200: Use syscon_regmap_lookup_by_phandle_args
mmc: Use of_property_present() for non-boolean properties
dt-bindings: mmc: samsung,exynos-dw-mshc: add specific compatible for exynos8895
mmc: sdhci-msm: convert to use custom crypto profile
mmc: crypto: add mmc_from_crypto_profile()
mmc: mtk-sd: Limit getting top_base to SoCs that require it
dt-bindings: mmc: mtk-sd: Document compatibles that need two register ranges
mmc: sdhci-acpi: Use devm_platform_ioremap_resource()
mmc: sdhci-acpi: Remove not so useful error message
dt-bindings: mmc: convert amlogic,meson-mx-sdio.txt to dtschema
dt-bindings: mmc: document mmc-slot
dt-bindings: mmc: controller: remove '|' when not needed
dt-bindings: mmc: controller: move properties common with slot out to mmc-controller-common
dt-bindings: mmc: controller: clarify the address-cells description
mmc: bcm2835: add suspend/resume pm support
dt-bindings: Drop Bhupesh Sharma from maintainers
mmc: core: don't include 'pm_wakeup.h' directly
mmc: mtk-sd: Add support for ignoring cmd response CRC
mmc: core: Introduce the MMC_RSP_R1B_NO_CRC response
...
|
|
Pull hwmon updates from Guenter Roeck:
"New drivers:
- PMBus client driver for Intel CRPS185 power supply
- PMBus client driver for Texas Instruments TPS25990
Chip support added to existing drivers:
- pmbus/max15301: Add support for MAX15303
- pmbus/adm1275: Add adm1273 support
- lm75: Add NXP P3T1755 support; with it, add I3C support to the
driver
- asus-ec-sensors: Add TUF GAMING X670E PLUS
Other notable changes:
- nct6683: Add customer IDs for several MSI and ASRock boards
- tmp108: Add regulator support
- Improve write protect support in PMBus core
- pmbus/dps920ab: Add ability to instantiate through i2c
- The hwmon core now accepts NULL as device name parameter to
[devm_]hwmon_device_register_with_info ans uses the parent device
name as fallback in that case
- The PMBus core now provides the PMBUs revision in a debugfs file
- asus-ec-sensors: Support for optional CPU fan on AMD 600
motherboards
- raspberrypi: Add PM suspend/resume support
- dell-smm: Enable manual fan control support on Dell XPS 9370
- pwm-fan: Default to maximum cooling level if provided
And various other minor fixes and improvements"
* tag 'hwmon-for-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (44 commits)
hwmon: pmbus: dps920ab: Add ability to instantiate through i2c
hwmon: (pwm-fan) Default to the Maximum cooling level if provided
hwmon: (asus_atk0110) Use str_enabled_disabled() and str_enable_disable() helpers
hwmon: Fix help text for aspeed-g6-pwm-tach
hwmon: (dell-smm) Add Dell XPS 9370 to fan control whitelist
hwmon: (acpi_power_meter) Fix update the power trip points on failure
hwmon: (acpi_power_meter) Fix uninitialized variables
hwmon: (core) Use device name as a fallback in devm_hwmon_device_register_with_info
hwmon: (pmbus/max15301) Add support for MAX15303
hwmon: (pmbus/adm1275) add adm1273 support
dt-bindings: hwmon: adm1275: add adm1273
hwmon: (nct6683) Add another customer ID for MSI
hwmon: (pwm-fan): Make use of device properties everywhere
hwmon: (lm75) add I3C support for P3T1755
hwmon: (lm75) separate probe into common and I2C parts
hwmon: (lm75) Remove superfluous 'client' member from private struct
hwmon: (lm75) simplify regulator handling
hwmon: (lm75) simplify lm75_write_config()
hwmon: (lm75) Hide register size differences in regmap access functions
hwmon: (pmbus/crps) Add Intel CRPS185 power supply
...
|
|
Pull LED updates from Lee Jones:
- Allow struct bin_attribute instances to be placed in read-only memory
for enhanced protection
- Fix a memory leak in the cht-wcove driver by using
devm_led_classdev_register()
- Fix an OF node reference leak in the netxbig driver
- Ensure PWM is disabled properly in pwm-multicolor suspend
- Add support for Texas Instruments LP8864, LP8864S, LP8866
LED-backlight drivers
- Add support for STMicroelectronics's LED1202 12-channel LED driver
- Convert LP8860 bindings to YAML format
- Add bindings for the TI LP8864/LP8866 LED drivers
- Add LED1202 LED controller bindings
- Fix path to color definitions in leds-class-multicolor.yaml
- Add pm660l compatible to qcom,spmi-flash-led bindings
- Extend cznic,turris-omnia-leds binding with interrupts property
- Add documentation for the STMicroelectronics LED1202 driver
- Add entry for AAEON UP board FPGA drivers in MAINTAINERS
- Fix a wrong format specifier in the ledtrig-activity driver
- Fix a bug in the lp8860 driver where only half of the EEPROM was
written
* tag 'leds-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (28 commits)
leds: triggers: Constify 'struct bin_attribute'
leds: cht-wcove: Use devm_led_classdev_register() to avoid memory leak
leds: lp8864: Add support for Texas Instruments LP8864, LP8864S, LP8866 LED-backlights
dt-bindings: leds: Convert LP8860 into YAML format
leds: Add LED1202 I2C driver
dt-bindings: leds: Add LED1202 LED Controller
Documentation:leds: Add leds-st1202.rst
leds: pwm-multicolor: Disable PWM when going to suspend
leds: netxbig: Fix an OF node reference leak in netxbig_leds_get_of_pdata()
turris-omnia-mcu-interface.h: Move macro definitions outside of enums
MAINTAINERS: Add entry for AAEON UP board FPGA drivers
leds: Add AAEON UP board LED driver
leds: trigger: netdev: Check offload ability on interface up
leds: turris-omnia: Use uppercase first letter in all comments
leds: turris-omnia: Use dev_err_probe() where appropriate
leds: turris-omnia: Inform about missing LED gamma correction feature in the MCU driver
platform: cznic: turris-omnia-mcu: Inform about missing LED panel brightness change interrupt feature
leds: turris-omnia: Notify sysfs on MCU global LEDs brightness change
leds: turris-omnia: Document driver private structures
dt-bindings: leds: cznic,turris-omnia-leds: Allow interrupts property
...
|
|
Pull mfd updates from Lee Jones:
- Fix race in device_node_get_regmap() using more extensive locking
- Remove unused platform driver support for syscon
- Allow syscon nodes to be registered without a "syscon" compatible
string
- Make `platform_data` pointer const in struct mfd_cell
- Revert support for multiple AXP PMICs to avoid regressions
- Increase SoundWire attach timeout and use gpiod_set_raw() for GPIO
operation
- Store the result from fault_log() for use by other sub-components
- Fix an invalid regmap-config max_register value
- Add another Gemini Lake ISA bridge PCI device ID
- Use devm_register_power_off_handler() to simplify code
- Add support for QNAP microcontroller units, including LEDs, input,
and hwmon
- Use MFD_CELL macros and remove unused code
- Add support for AAEON UP board FPGA
- Remove unused includes
- Fix various typos and compatibility issues in multiple bindings
- Add new bindings for rk3562 QoS, LED1202, and qcom,tcsr-ipq5424
- Convert several bindings to YAML schema
- Update sprd,sc2731 bindings to reference sprd,sc2731-efuse bindings
directly
- Fix rohm,bd71815 bindings by correcting resistor values and typos
- Documentation improvements:
- Add documentation for LED1202 and qnap-mcu-hwmon
- Adjust the file entry for the qnap-mcu header in MAINTAINERS
* tag 'mfd-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (35 commits)
MAINTAINERS: Adjust the file entry for the qnap-mcu header
dt-bindings: mfd: syscon: Fix ti,j784s4-acspcie-proxy-ctrl compatible
dt-bindings: mfd: syscon: Fix al,alpine-sysfabric-service compatible
Revert "mfd: axp20x: Allow multiple regulators"
dt-bindings: mfd: syscon: Add rk3562 QoS register compatible
mfd: syscon: Allow syscon nodes without a "syscon" compatible
mfd: syscon: Remove the platform driver support
mfd: syscon: Fix race in device_node_get_regmap()
dt-bindings: mfd: atmel: Convert to YAML schema
dt-bindings: mfd: atmel,at91sam9260: Convert to YAML schema
dt-bindings: mfd: sprd,sc2731: Reference sprd,sc2731-efuse bindings
mfd: tps65219: Remove unused macros & add regmap.h
mfd: tps65219: Use MFD_CELL macros
leds: Add LED1202 I2C driver
dt-bindings: leds: Add LED1202 LED Controller
Documentation:leds: Add leds-st1202.rst
mfd: Add support for AAEON UP board FPGA
mfd: da9052: Store result from fault_log
mfd: intel_soc_pmic_chtdc_ti: Fix invalid regmap-config max_register value
mfd: cs42l43: Use devres for remove as well
...
|
|
Pull spi updates from Mark Brown:
"This is a fairly quiet release for the most part, though we do have
one really nice improvement in the spi-mem framework which will
improve performance for flash devices especially when built on by
changes in the MTD subsystem which are also due to be sent this merge
window.
There's also been some substantial work on some of the drivers,
highlights include:
- Support for per-operation bus frequency in the spi-mem framework,
meaning speeds are no longer limited by the slowest operation
- ACPI support and improved power management for Rockchip SFC
controllers
- Support for Atmel SAM7G5 QuadSPI and KEBA SPI controllers"
* tag 'spi-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (49 commits)
spi: pxa2xx: Introduce __lpss_ssp_update_priv() helper
spi: ti-qspi: Use syscon_regmap_lookup_by_phandle_args
spi: amd: Fix -Wuninitialized in amd_spi_exec_mem_op()
spi: spi-mem: Estimate the time taken by operations
spi: spi-mem: Create macros for DTR operation
spi: spi-mem: Reorder spi-mem macro assignments
spi: zynqmp-gqspi: Support per spi-mem operation frequency switches
spi: zynq-qspi: Support per spi-mem operation frequency switches
spi: spi-ti-qspi: Support per spi-mem operation frequency switches
spi: spi-sn-f-ospi: Support per spi-mem operation frequency switches
spi: rockchip-sfc: Support per spi-mem operation frequency switches
spi: nxp-fspi: Support per spi-mem operation frequency switches
spi: mxic: Support per spi-mem operation frequency switches
spi: mt65xx: Support per spi-mem operation frequency switches
spi: microchip-core-qspi: Support per spi-mem operation frequency switches
spi: fsl-qspi: Support per spi-mem operation frequency switches
spi: dw: Support per spi-mem operation frequency switches
spi: cadence-qspi: Support per spi-mem operation frequency switches
spi: amlogic-spifc-a1: Support per spi-mem operation frequency switches
spi: amd: Drop redundant check
...
|
|
Pull regulator updates from Mark Brown:
"This was a very quiet release, aside from some smaller improvements we
have:
- Support for power budgeting on regulators, initially targeted at
some still in review support for PSE controllers but generally
useful
- Support for error interrupts from ROHM BD96801 devices
- Support for NXP PCA9452"
* tag 'regulator-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: dt-bindings: Add regulator-power-budget-milliwatt property
regulator: Add support for power budget
regulator: core: Resolve supply using of_node from regulator_config
regulator: of: Implement the unwind path of of_regulator_match()
regulator: tps65219: Remove debugging helper function
regulator: tps65219: Remove MODULE_ALIAS
regulator: tps65219: Update driver name
regulator: tps65219: Use dev_err_probe() instead of dev_err()
regulator: dt-bindings: mt6315: Drop regulator-compatible property
regulator: pca9450: Add PMIC pca9452 support
regulator: dt-bindings: pca9450: Add pca9452 support
regulator: pca9450: Use dev_err_probe() to simplify code
regulator: pca9450: add enable_value for all bucks
regulator: bd96801: Add ERRB IRQ
|
|
Pull regmap updates from Mark Brown:
"There's one big bit of work this time around, the addition of support
for a greater range of MBQ access sizes to SoundWire devices together
with support for deferred read/write.
The MBQ register maps generally have variable register sizes, the
variable regiseter size support allows them to be handled much more
naturally within regmap with less open coding in drivers.
The deferred read/write support avoids spurious errors when devices
make use of a bus feature allowing them to indicate they're busy.
These changes pull in a supporting SoundWire change, and there's an
ASoC change building off the new code.
The remainder of the changes are code cleanups"
* tag 'regmap-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: sdw-mbq: Add support for SDCA deferred controls
regmap: sdw-mbq: Add support for further MBQ register sizes
ASoC: SDCA: Update list of entity_0 controls
soundwire: SDCA: Add additional SDCA address macros
regmap: regmap_multi_reg_read(): make register list const
regmap: cache: rbtree: use krealloc_array() to replace krealloc()
regmap: cache: mapple: use kmalloc_array() to replace kmalloc()
regmap: place foo / 8 and foo % 8 closer to each other
regmap: Use BITS_TO_BYTES()
regmap: cache: Use BITS_TO_BYTES()
|
|
Pull power sequencing updates from Bartosz Golaszewski:
"We added support for another Qualcomm WCN model and a FIXME comment
that explains why we still need to keep a GPIO workaround for now
despite having merged a set of changes to the PCI code that seemingly
fixed the underlying problem:
- support a new model in the qcom-wcn pwrseq driver
- explain the need to keep the WLAN_EN GPIO workaround for now with a
FIXME comment"
* tag 'pwrseq-updates-for-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
power: sequencing: qcom-wcn: explain why we need the WLAN_EN GPIO hack
power: sequencing: qcom-wcn: add support for the WCN6750 PMU
|
|
Pull gpio updates from Bartosz Golaszewski:
"Thanks to little activity in December, this is really tiny. Just a few
updates to drivers and device-tree bindings.
Driver improvements:
- support a new model in gpio-mpc8xxx
- refactor gpio-tqmx86 and add support for direction setting
- allow building gpio-omap with COMPILE_TEST=y
- use gpiochip_get_data() instead of dev_get_drvdata() in
gpio-twl6040
- drop unued field from driver data in gpio-altera
- use generic request/free callbacks in gpio-regmap for better
integration with pinctrl
- use dev_err_probe() where applicable in gpio-pca953x
- use existing dedicated GPIO defines in gpio-tps65219 instead of
custom ones
DT bindings:
- document a new model in fsl,qoriq-gpio
- explain the chip's latch clock pin and how it works like
chip-select in fairchild,74hc595
- enable the gpio-line-names property for gpio-brcmstb"
* tag 'gpio-updates-for-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: regmap: Use generic request/free ops
gpio: altera: Drop .mapped_irq from driver data
gpio: mpc8xxx: Add MPC8314 support
dt-bindings: gpio: fsl,qoriq-gpio: Add compatible string fsl,mpc8314-gpio
dt-bindings: gpio: fairchild,74hc595: Document chip select vs. latch clock
gpio: tps65219: Use existing kernel gpio macros
gpio: pca953x: log an error when failing to get the reset GPIO
dt-bindings: gpio: brcmstb: permit gpio-line-names property
gpio: tqmx86: add support for changing GPIO directions
gpio: tqmx86: introduce tqmx86_gpio_clrsetbits() helper
gpio: tqmx86: use cleanup guards for spinlock
gpio: tqmx86: consistently refer to IRQs by hwirq numbers
gpio: tqmx86: add macros for interrupt configuration
gpio: omap: allow building the module with COMPILE_TEST=y
gpio: twl4030: use gpiochip_get_data
|
|
Pull networking updates from Paolo Abeni:
"This is slightly smaller than usual, with the most interesting work
being still around RTNL scope reduction.
Core:
- More core refactoring to reduce the RTNL lock contention, including
preparatory work for the per-network namespace RTNL lock, replacing
RTNL lock with a per device-one to protect NAPI-related net device
data and moving synchronize_net() calls outside such lock.
- Extend drop reasons usage, adding net scheduler, AF_UNIX, bridge
and more specific TCP coverage.
- Reduce network namespace tear-down time by removing per-subsystems
synchronize_net() in tipc and sched.
- Add flow label selector support for fib rules, allowing traffic
redirection based on such header field.
Netfilter:
- Do not remove netdev basechain when last device is gone, allowing
netdev basechains without devices.
- Revisit the flowtable teardown strategy, dealing better with fin,
reset and re-open events.
- Scale-up IP-vs connection dumping by avoiding linear search on each
restart.
Protocols:
- A significant XDP socket refactor, consolidating and optimizing
several helpers into the core
- Better scaling of ICMP rate-limiting, by removing false-sharing in
inet peers handling.
- Introduces netlink notifications for multicast IPv4 and IPv6
address changes.
- Add ipsec support for IP-TFS/AggFrag encapsulation, allowing
aggregation and fragmentation of the inner IP.
- Add sysctl to configure TIME-WAIT reuse delay for TCP sockets, to
avoid local port exhaustion issues when the average connection
lifetime is very short.
- Support updating keys (re-keying) for connections using kernel TLS
(for TLS 1.3 only).
- Support ipv4-mapped ipv6 address clients in smc-r v2.
- Add support for jumbo data packet transmission in RxRPC sockets,
gluing multiple data packets in a single UDP packet.
- Support RxRPC RACK-TLP to manage packet loss and retransmission in
conjunction with the congestion control algorithm.
Driver API:
- Introduce a unified and structured interface for reporting PHY
statistics, exposing consistent data across different H/W via
ethtool.
- Make timestamping selectable, allow the user to select the desired
hwtstamp provider (PHY or MAC) administratively.
- Add support for configuring a header-data-split threshold (HDS)
value via ethtool, to deal with partial or buggy H/W
implementation.
- Consolidate DSA drivers Energy Efficiency Ethernet support.
- Add EEE management to phylink, making use of the phylib
implementation.
- Add phylib support for in-band capabilities negotiation.
- Simplify how phylib-enabled mac drivers expose the supported
interfaces.
Tests and tooling:
- Make the YNL tool package-friendly to make it easier to deploy it
separately from the kernel.
- Increase TCP selftest coverage importing several packetdrill
test-cases.
- Regenerate the ethtool uapi header from the YNL spec, to ease
maintenance and future development.
- Add YNL support for decoding the link types used in net self-tests,
allowing a single build to run both net and drivers/net.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- add cross E-Switch QoS support
- add SW Steering support for ConnectX-8
- implement support for HW-Managed Flow Steering, improving the
rule deletion/insertion rate
- support for multi-host LAG
- Intel (ixgbe, ice, igb):
- ice: add support for devlink health events
- ixgbe: add initial support for E610 chipset variant
- igb: add support for AF_XDP zero-copy
- Meta:
- add support for basic RSS config
- allow changing the number of channels
- add hardware monitoring support
- Broadcom (bnxt):
- implement TCP data split and HDS threshold ethtool support,
enabling Device Memory TCP.
- Marvell Octeon:
- implement egress ipsec offload support for the cn10k family
- Hisilicon (HIBMC):
- implement unicast MAC filtering
- Ethernet NICs embedded and virtual:
- Convert UDP tunnel drivers to NETDEV_PCPU_STAT_DSTATS, avoiding
contented atomic operations for drop counters
- Freescale:
- quicc: phylink conversion
- enetc: support Tx and Rx checksum offload and improve TSO
performances
- MediaTek:
- airoha: introduce support for ETS and HTB Qdisc offload
- Microchip:
- lan78XX USB: preparation work for phylink conversion
- Synopsys (stmmac):
- support DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
- refactor EEE support to leverage the new driver API
- optimize DMA and cache access to increase raw RX performances
by 40%
- TI:
- icssg-prueth: add multicast filtering support for VLAN
interface
- netkit:
- add ability to configure head/tailroom
- VXLAN:
- accepts packets with user-defined reserved bit
- Ethernet switches:
- Microchip:
- lan969x: add RGMII support
- lan969x: improve TX and RX performance using the FDMA engine
- nVidia/Mellanox:
- move Tx header handling to PCI driver, to ease XDP support
- Ethernet PHYs:
- Texas Instruments DP83822:
- add support for GPIO2 clock output
- Realtek:
- 8169: add support for RTL8125D rev.b
- rtl822x: add hwmon support for the temperature sensor
- Microchip:
- add support for RDS PTP hardware
- consolidate periodic output signal generation
- CAN:
- several DT-bindings to DT schema conversions
- tcan4x5x:
- add HW standby support
- support nWKRQ voltage selection
- kvaser:
- allowing Bus Error Reporting runtime configuration
- WiFi:
- the on-going Multi-Link Operation (MLO) effort continues,
affecting both the stack and in drivers
- mac80211/cfg80211:
- Emergency Preparedness Communication Services (EPCS) station
mode support
- support for adding and removing station links for MLO
- add support for WiFi 7/EHT mesh over 320 MHz channels
- report Tx power info for each link
- RealTek (rtw88):
- enable USB Rx aggregation and USB 3 to improve performance
- LED support
- RealTek (rtw89):
- refactor power save to support Multi-Link Operations
- add support for RTL8922AE-VS variant
- MediaTek (mt76):
- single wiphy multiband support (preparation for MLO)
- p2p device support
- add TP-Link TXE50UH USB adapter support
- Qualcomm (ath10k):
- support for the QCA6698AQ IP core
- Qualcomm (ath12k):
- enable MLO for QCN9274
- Bluetooth:
- Allow sysfs to trigger hdev reset, to allow recovering devices
not responsive from user-space
- MediaTek: add support for MT7922, MT7925, MT7921e devices
- Realtek: add support for RTL8851BE devices
- Qualcomm: add support for WCN785x devices
- ISO: allow BIG re-sync"
* tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1386 commits)
net/rose: prevent integer overflows in rose_setsockopt()
net: phylink: fix regression when binding a PHY
net: ethernet: ti: am65-cpsw: streamline TX queue creation and cleanup
net: ethernet: ti: am65-cpsw: streamline RX queue creation and cleanup
net: ethernet: ti: am65-cpsw: ensure proper channel cleanup in error path
ipv6: Convert inet6_rtm_deladdr() to per-netns RTNL.
ipv6: Convert inet6_rtm_newaddr() to per-netns RTNL.
ipv6: Move lifetime validation to inet6_rtm_newaddr().
ipv6: Set cfg.ifa_flags before device lookup in inet6_rtm_newaddr().
ipv6: Pass dev to inet6_addr_add().
ipv6: Convert inet6_ioctl() to per-netns RTNL.
ipv6: Hold rtnl_net_lock() in addrconf_init() and addrconf_cleanup().
ipv6: Hold rtnl_net_lock() in addrconf_dad_work().
ipv6: Hold rtnl_net_lock() in addrconf_verify_work().
ipv6: Convert net.ipv6.conf.${DEV}.XXX sysctl to per-netns RTNL.
ipv6: Add __in6_dev_get_rtnl_net().
net: stmmac: Drop redundant skb_mark_for_recycle() for SKB frags
net: mii: Fix the Speed display when the network cable is not connected
sysctl net: Remove macro checks for CONFIG_SYSCTL
eth: bnxt: update header sizing defaults
...
|
|
When the 'cachestat()' system call was added in commit cf264e1329fb
("cachestat: implement cachestat syscall"), it was meant to be a much
more convenient (and performant) version of mincore() that didn't need
mapping things into the user virtual address space in order to work.
But it ended up missing the "check for writability or ownership" fix for
mincore(), done in commit 134fca9063ad ("mm/mincore.c: make mincore()
more conservative").
This just adds equivalent logic to 'cachestat()', modified for the file
context (rather than vma).
Reported-by: Sudheendra Raghav Neela <sneela@tugraz.at>
Fixes: cf264e1329fb ("cachestat: implement cachestat syscall")
Tested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
Even Xu
Colin Ian King
Vicki Pfau
Daniil Dulov
Alex Henrie
Wentao Guan
Zhang Lixu
Yu-Chun Lin
Ryan McClelland
Stuart Hayhurst
Tulio Fernandes
Ievgen Vovk
Jinghao Jia
Daniel Brackenbury
Charles Han
Chia-Lin Kao (AceLan)
Arnd Bergmann
Linus Torvalds