| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add Tegra264 AMX support with following changes:
- Add soc_data for Tegra264-specific variations
- Tegra264 AMX supports 32 output channels, hence update the capture DAI
channels_max parameter and CIF configuration API.
- Register offsets and default values are updated to align with Tegra264.
- Add 128 byte map controls for Tegra264 to accommodate each byte per
channel (32channels x 32bits).
Signed-off-by: Sheetal <sheetal@nvidia.com>
Link: https://patch.msgid.link/20250512051747.1026770-9-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add Tegra264 I2S support with following changes:
- Add soc_data for Tegra264-specific variations
- Tegra264 I2S supports 32 audio channels, hence update the TDM config,
CIF configuration API and DAI channel_max parameter.
- Register offsets and default values are updated to align with Tegra264.
Signed-off-by: Sheetal <sheetal@nvidia.com>
Link: https://patch.msgid.link/20250512051747.1026770-8-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The PLLs should be set with a VCO frequency in the 900MHz – 1GHz range
to minimize jitter and ppm error for Tegra264. Add the PLLA rate
accordingly.
Therefore, use 983040000 frequency is for multiple of 8K frequencies
and 993484800 frequency is for multiple of 11.025K frequencies.
Signed-off-by: Sheetal <sheetal@nvidia.com>
Link: https://patch.msgid.link/20250512051747.1026770-7-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The ARAM address for Tegra264 has been updated. To maintain backward
compatibility given its chip-specific nature, it's now included in the
soc_data.
Signed-off-by: Sheetal <sheetal@nvidia.com>
Link: https://patch.msgid.link/20250512051747.1026770-6-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add Tegra264 I2S support with following changes:
- Add soc_data for Tegra264-specific variations
- Tegra264 supports 32 RX and 32 TX ADMAIF channels and each ADMAIF
stream supports max 32 channels. To accommodate the change dais, CIF
configuration API and driver components are updated.
- Register offsets and default values are updated to align with Tegra264.
Signed-off-by: Sheetal <sheetal@nvidia.com>
Link: https://patch.msgid.link/20250512051747.1026770-5-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In Tegra264, the CIF register data bit positions are changed for I2S,
AMX, ADX and ADMAIF AHUB modules, as they now support a maximum of
32 channels. tegra264_set_cif API added to set the CIF for IPs supporting
32 channels.
Signed-off-by: Sheetal <sheetal@nvidia.com>
Link: https://patch.msgid.link/20250512051747.1026770-4-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add Tegra264 compatible strings to APE subsystem device bindings:
- audio-graph-card: Due to different PLL clock rate.
- admaif: Due to 32 channels supported and register offset changes.
- i2s: Due to 32 channels supported and register offset changes.
- amx/adx: Due to 32 channels supported and register offset changes.
- asrc: Due to different ARAM address.
- ahub: Due to AHUB IPs number of instances updates.
- for future proofing the T264 compatibility is added for other device
nodes.
These bindings enable the enhanced audio features of Tegra264
while maintaining compatibility with existing platforms.
Signed-off-by: Sheetal <sheetal@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250512051747.1026770-3-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add optional interconnect and iommu properties to admaif yaml. These
properties are supported from Tegra186 SoC onwards.
This fixes below dtbs_check error for Tegra194 and Tegra234:
'interconnect-names', 'interconnects', 'iommus' do not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Sheetal <sheetal@nvidia.com>
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://patch.msgid.link/20250512051747.1026770-2-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Add helper functions to add DAPM widgets, routes, ALSA controls,
and DAI drivers, these will be used to create SDCA function device
drivers.
This series should provide most of the core functionality needed to
get a device registered and have a working DAPM graph within the
device. There are some features that still need additional work, these
are marked with FIXMEs in the code. The two main things are SDCA
Clock Muxes (not used in our devices and needs some ASoC core work),
and better support for more complex SDCA volume control definitions
(our parts have fairly simple volumes, and SDCA has a large amount of
flexibility in how the volume control is specified).
The next steps in the process are to add helpers for the DAI ops
themselves, some IRQ handling, and firmware download. And finally we
should be able to actually add the SDCA class driver itself.
|
|
Merge series from Stefan Binding <sbinding@opensource.cirrus.com>:
This adds support to the Intel machine drivers for CS35L63 codecs using
soundwire, and also adds match entries for the CDB35L63-CB2 on MTL
systems.
|
|
The yaml has "hp-det-gpios" property, but Audio-Graph-Card2 can handle
"mic-det-gpios" too. Add it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/877c2kaxn4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add an entry in the soundwire quirk table for Wildcat boards to support
WCL RVP
Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250521034840.8083-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This adds a match entry for using all the amps on a CDB35L63-CB2 board
without the CS42L43 codec. Configuration is:
SDW3: 1x CS35L63 (OUT1)
SDW1: 1x CS35L63 (OUT2)
Speaker playback and amp feedback are aggregated.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://patch.msgid.link/20250516152107.210994-3-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
CS35L63 is very similar to CS35L56, and uses the same driver, so we
can use the same configuration.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://patch.msgid.link/20250516152107.210994-2-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the previously parsed DisCo information from ACPI to create the DAI
drivers required to connect an SDCA Function into an ASoC soundcard.
Create DAI driver structures and populate the supported sample rates
and sample widths into them based on the Input/Output Terminal and any
attach Clock Source entities. More complex relationships with channels
etc. will be added later as constraints as part of the DAI startup.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-8-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the previously parsed DisCo information from ACPI to create the
ALSA controls required by an SDCA Function. This maps all User and
Application level SDCA Controls to ALSA controls. Typically controls
marked with those access levels are just volumes and mutes.
SDCA defines volume controls as an integer in 1/256ths of a dB and
then provides a mechanism to specify what values are valid (range
templates). Currently only a simple case of a single linear volume
range with a power of 2 step size is supported. This allows the code
to expose the volume control using a simple shift. This will need
expanded in the future, to support more complex ranges and probably
also some additional control types but this should be sufficient to
for a first pass.
For non-dataport terminal widgets also add a pin switch to allow
that endpoint to be turned on/off.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the previously parsed DisCo information from ACPI to create DAPM
widgets and routes representing a SDCA Function. For the most part SDCA
maps well to the DAPM abstractions.
The primary point of interest is the SDCA Power Domain Entities
(PDEs), which actually control the power status of the device. Whilst
these PDEs are the primary widgets the other parts of the SDCA graph
are added to maintain a consistency with the hardware abstract,
and allow routing to take effect. As for the PDEs themselves the
code currently only handle PS0 and PS3 (basically on and off),
the two intermediate power states are not commonly used and don't
map well to ASoC/DAPM.
Other minor points of slightly complexity include, the Group Entities
(GEs) these set the value of several other controls, typically
Selector Units (SUs) for enabling a cetain jack configuration. Multiple
SUs being controlled by a GE are easily modelled creating a single
control and sharing it among the controlled muxes.
SDCA also has a slight habit of having fully connected paths, relying
more on activating the PDEs to enable functionality. This doesn't
map quite so perfectly to DAPM which considers the path a reason to
power the PDE. Whilst in the current specification Mixer Units are
defined as fixed-function, in DAPM we create a virtual control for
each input (which defaults to connected). This allows paths to be
connected/disconnected, providing a more ASoC style approach to
managing the power. PIN_SWITCHs will also be added for non-dataport
terminal entities in a later patch along with the other ALSA controls,
providing greater flexibility in power management.
A top level helper sdca_asoc_populate_component() is exported that
counts and allocates everything, however, the intermediate counting and
population functions are also exported. This will allow end drivers to
do allocation and add custom handling, which is probably fairly likely
for the early SDCA devices.
Clock muxes are currently not fully supported, so some future work will
also be required there.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The core currently supports pin switches for source/sink widgets, but
only at the card level. SDCA components specify the fabric at the
level of the individual components, to support this add helpers to
allow component level pin switches.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move the allocation of the PDE delays array until after the size has
been adjusted, this saves an additional division and simplifies the
code slightly.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is no need to include MODULE_LICENSE() and MODULE_DESCRIPTION() in
sdca_regmap.c as this file is part of a larger module that already
defines these.
Fixes: e3f7caf74b79 ("ASoC: SDCA: Add generic regmap SDCA helpers")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix minor typo SDAC -> SDCA.
Fixes: 42b144cb6a2d ("ASoC: SDCA: Add SDCA Control parsing")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>:
This patchset adds support for sound card on Qualcomm QCS9100 and
QCS9075 boards.
|
|
Add compatibles for sound card on Qualcomm QCS9100 and
QCS9075 boards.
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20250519083244.4070689-3-mohammad.rafi.shaik@oss.qualcomm.com
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document the bindings for the Qualcomm QCS9100 and QCS9075 board
specific sound card.
The bindings are the same as for other newer Qualcomm ADSP sound cards,
thus keep them in existing qcom,sm8250.yaml file, even though Linux driver
is separate.
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Link: https://patch.msgid.link/20250519083244.4070689-2-mohammad.rafi.shaik@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Drop the I2C in one comment, for these registers are also used in SPI
driver; Move the macro definition of TASDEVICE_CMD_XXX from tas2781.h to
tas2781_fmwlib.c, because the macros are only referenced in only fwlib.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250518132451.707-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch makes sure the access to the codecs is cached until the device is enumerated.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20250519090645.2620292-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
|
|
Pull dmaengine fixes from Vinod Koul:
"This has a bunch of idxd driver fixes, dmatest revert and bunch of
smaller driver fixes:
- a bunch of idxd potential mem leak fixes
- dmatest revert for waiting for interrupt fix as that causes issue
- a couple of ti k3 udma fixes for locking and cap_mask
- mediatek deadlock fix and unused variable cleanup fix"
* tag 'dmaengine-fix-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: mediatek: drop unused variable
dmaengine: fsl-edma: Fix return code for unhandled interrupts
dmaengine: mediatek: Fix a possible deadlock error in mtk_cqdma_tx_status()
dmaengine: idxd: Fix ->poll() return value
dmaengine: idxd: Refactor remove call with idxd_cleanup() helper
dmaengine: idxd: Add missing idxd cleanup to fix memory leak in remove call
dmaengine: idxd: fix memory leak in error handling path of idxd_pci_probe
dmaengine: idxd: fix memory leak in error handling path of idxd_alloc
dmaengine: idxd: Add missing cleanups in cleanup internals
dmaengine: idxd: Add missing cleanup for early error out in idxd_setup_internals
dmaengine: idxd: fix memory leak in error handling path of idxd_setup_groups
dmaengine: idxd: fix memory leak in error handling path of idxd_setup_engines
dmaengine: idxd: fix memory leak in error handling path of idxd_setup_wqs
dmaengine: ptdma: Move variable condition check to the first place and remove redundancy
dmaengine: idxd: Fix allowing write() from different address spaces
dmaengine: ti: k3-udma: Add missing locking
dmaengine: ti: k3-udma: Use cap_mask directly from dma_device structure instead of a local copy
dmaengine: Revert "dmaengine: dmatest: Fix dmatest waiting less when interrupted"
dmaengine: idxd: cdev: Fix uninitialized use of sva in idxd_cdev_open
|
|
Pull phy fixes from Vinod Koul:
"A bunch of renesas fixes and few smaller fixes in other drivers:
- Rensas fixes for unbind ole detection, irq, locking etc
- tegra fixes for error handling at init and UTMI power states and
stray unlock fix
- rockchip missing assignment and pll output fixes
- startfive usb host detection fixes"
* tag 'phy-fixes-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: Fix error handling in tegra_xusb_port_init
phy: renesas: rcar-gen3-usb2: Set timing registers only once
phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power off
phy: renesas: rcar-gen3-usb2: Lock around hardware registers and driver data
phy: renesas: rcar-gen3-usb2: Move IRQ request in probe
phy: renesas: rcar-gen3-usb2: Fix role detection on unbind/bind
phy: tegra: xusb: remove a stray unlock
phy: phy-rockchip-samsung-hdptx: Fix PHY PLL output 50.25MHz error
phy: starfive: jh7110-usb: Fix USB 2.0 host occasional detection failure
phy: rockchip-samsung-dcphy: Add missing assignment
phy: can-transceiver: Re-instate "mux-states" property presence check
phy: qcom-qmp-ufs: check for mode type for phy setting
phy: tegra: xusb: Use a bitmask for UTMI pad power state tracking
|
|
Pull soundwire fix from Vinod Koul:
- Fix for irq domain creation race in the core
* tag 'soundwire-6.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: bus: Fix race on the creation of the IRQ domain
|
|
Pull hotfixes from Andrew Morton:
"Nine singleton hotfixes, all MM. Four are cc:stable"
* tag 'mm-hotfixes-stable-2025-05-17-09-41' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: userfaultfd: correct dirty flags set for both present and swap pte
zsmalloc: don't underflow size calculation in zs_obj_write()
mm/page_alloc: fix race condition in unaccepted memory handling
mm/page_alloc: ensure try_alloc_pages() plays well with unaccepted memory
MAINTAINERS: add mm GUP section
mm/codetag: move tag retrieval back upfront in __free_pages()
mm/memory: fix mapcount / refcount sanity check for mTHP reuse
kernel/fork: only call untrack_pfn_clear() on VMAs duplicated for fork()
mm: hugetlb: fix incorrect fallback for subpool
|
|
Pull misc irqchip driver fixes from Ingo Molnar:
- Remove the MSI_CHIP_FLAG_SET_ACK flag from 5 irqchip drivers
that did not require it
- Fix IRQ handling delays in the riscv-imsic irqchip driver
* tag 'irq-urgent-2025-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/riscv-imsic: Start local sync timer on correct CPU
irqchip: Drop MSI_CHIP_FLAG_SET_ACK from unsuspecting MSI drivers
|
|
Pull misc x86 fixes from Ingo Molnar:
- Fix SEV-SNP kdump bugs
- Update the email address of Alexey Makhalov in MAINTAINERS
- Add the CPU feature flag for the Zen6 microarchitecture
- Fix typo in system message
* tag 'x86-urgent-2025-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Remove duplicated word in warning message
x86/CPU/AMD: Add X86_FEATURE_ZEN6
x86/sev: Make sure pages are not skipped during kdump
x86/sev: Do not touch VMSA pages during SNP guest memory kdump
MAINTAINERS: Update Alexey Makhalov's email address
x86/sev: Fix operator precedence in GHCB_MSR_VMPL_REQ_LEVEL macro
|
|
Pull x86 perf event fix from Ingo Molnar:
"Fix PEBS-via-PT crash"
* tag 'perf-urgent-2025-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix segfault with PEBS-via-PT with sample_freq
|
|
Pull LoongArch fixes from Huacai Chen:
"Fix some bugs in kernel-fpu, cpu idle function, hibernation and
uprobes"
* tag 'loongarch-fixes-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: uprobes: Remove redundant code about resume_era
LoongArch: uprobes: Remove user_{en,dis}able_single_step()
LoongArch: Save and restore CSR.CNTC for hibernation
LoongArch: Move __arch_cpu_idle() to .cpuidle.text section
LoongArch: Fix MAX_REG_OFFSET calculation
LoongArch: Prevent cond_resched() occurring within kernel-fpu
|
|
Pull i2c fix from Wolfram Sang:
- designware: cleanup properly on probe failure
* tag 'i2c-for-6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: designware: Fix an error handling path in i2c_dw_pci_probe()
|
|
i2c-host-fixes for v6.15-rc7
- designware: cleanup properly on probe failure
|
|
Pull smb client fixes from Steve French:
- Fix memory leak in mkdir error path
- Fix max rsize miscalculation after channel reconnect
* tag '6.15-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix zero rsize error messages
smb: client: fix memory leak during error handling for POSIX mkdir
|
|
Pull drm fixes from Dave Airlie:
"Weekly drm fixes, I'll be honest and say I think this is larger than
I'd prefer at this point, the main blow out point is that xe has two
larger fixes.
One is a fix for active context utilisation reporting, it's for a
reported regression and will end up in stable anyways, so I don't see
any point in holding it up.
The second is a fix for mixed cpu/gpu atomics, which are currently
broken, but are also not something your average desktop/laptop user is
going to hit in normal operation, and having them fixed now is better
than threading them through stable later.
Other than those, it's mostly the usual, a bunch of amdgpu randoms and
a few other minor fixes.
dma-buf:
- Avoid memory reordering in fence handling
meson:
- Avoid integer overflow in mode-clock calculations
panel-mipi-dbi:
- Fix output with drm_client_setup_with_fourcc()
amdgpu:
- Fix CSA unmap
- Fix MALL size reporting on GFX11.5
- AUX fix
- DCN 3.5 fix
- VRR fix
- DP MST fix
- DML 2.1 fixes
- Silence DP AUX spam
- DCN 4.0.1 cursor fix
- VCN 4.0.5 fix
ivpu:
- Fix buffer size in debugfs code
gpuvm:
- Add timeslicing and allocation restriction for SVM
xe:
- Fix shrinker debugfs name
- Add HW workaround to Xe2
- Fix SVM when mixing GPU and CPU atomics
- Fix per client engine utilization due to active contexts not saving
timestamp with lite restore enabled"
* tag 'drm-fixes-2025-05-17' of https://gitlab.freedesktop.org/drm/kernel: (24 commits)
drm/xe: Add WA BB to capture active context utilization
drm/xe: Save the gt pointer in lrc and drop the tile
drm/xe: Save CTX_TIMESTAMP mmio value instead of LRC value
drm/xe: Timeslice GPU on atomic SVM fault
drm/gpusvm: Add timeslicing support to GPU SVM
drm/xe: Strict migration policy for atomic SVM faults
drm/gpusvm: Introduce devmem_only flag for allocation
drm/xe/xe2hpg: Add Wa_22021007897
drm/amdgpu: read back register after written for VCN v4.0.5
Revert "drm/amd/display: Hardware cursor changes color when switched to software cursor"
dma-buf: insert memory barrier before updating num_fences
drm/xe: Fix the gem shrinker name
drm/amd/display: Avoid flooding unnecessary info messages
drm/amd/display: Fix null check of pipe_ctx->plane_state for update_dchubp_dpp
drm/amd/display: check stream id dml21 wrapper to get plane_id
drm/amd/display: fix link_set_dpms_off multi-display MST corner case
drm/amd/display: Defer BW-optimization-blocked DRR adjustments
Revert: "drm/amd/display: Enable urgent latency adjustment on DCN35"
drm/amd/display: Correct the reply value when AUX write incomplete
drm/amdgpu: fix incorrect MALL size for GFX1151
...
|
|
Pull NFS client bugfixes from Trond Myklebust:
- NFS: Fix a couple of missed handlers for the ENETDOWN and ENETUNREACH
transport errors
- NFS: Handle Oopsable failure of nfs_get_lock_context in the unlock
path
- NFSv4: Fix a race in nfs_local_open_fh()
- NFSv4/pNFS: Fix a couple of layout segment leaks in layoutreturn
- NFSv4/pNFS Avoid sharing pNFS DS connections between net namespaces
since IP addresses are not guaranteed to refer to the same nodes
- NFS: Don't flush file data while holding multiple directory locks in
nfs_rename()
* tag 'nfs-for-6.15-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Avoid flushing data while holding directory locks in nfs_rename()
NFS/pnfs: Fix the error path in pnfs_layoutreturn_retry_later_locked()
NFSv4/pnfs: Reset the layout state after a layoutreturn
NFS/localio: Fix a race in nfs_local_open_fh()
nfs: nfs3acl: drop useless assignment in nfs3_get_acl()
nfs: direct: drop useless initializer in nfs_direct_write_completion()
nfs: move the nfs4_data_server_cache into struct nfs_net
nfs: don't share pNFS DS connections between net namespaces
nfs: handle failure of nfs_get_lock_context in unlock path
pNFS/flexfiles: Record the RPC errors in the I/O tracepoints
NFSv4/pnfs: Layoutreturn on close must handle fatal networking errors
NFSv4: Handle fatal ENETDOWN and ENETUNREACH errors
|
|
The Linux client assumes that all filehandles are non-volatile for
renames within the same directory (otherwise sillyrename cannot work).
However, the existence of the Linux 'subtree_check' export option has
meant that nfs_rename() has always assumed it needs to flush writes
before attempting to rename.
Since NFSv4 does allow the client to query whether or not the server
exhibits this behaviour, and since knfsd does actually set the
appropriate flag when 'subtree_check' is enabled on an export, it
should be OK to optimise away the write flushing behaviour in the cases
where it is clearly not needed.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
|
|
If there isn't a valid layout, or the layout stateid has changed, the
cleanup after a layout return should clear out the old data.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
If there are still layout segments in the layout plh_return_lsegs list
after a layout return, we should be resetting the state to ensure they
eventually get returned as well.
Fixes: 68f744797edd ("pNFS: Do not free layout segments that are marked for return")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Pull SCSI fix from James Bottomley:
"Fix to zone block devices to make the maximum segment count match what
the block layer is capable of"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd_zbc: block: Respect bio vector limits for REPORT ZONES buffer
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- fixes for atomic writes (Alan Adamson)
- fixes for polled CQs in nvmet-epf (Damien Le Moal)
- fix for polled CQs in nvme-pci (Keith Busch)
- fix compile on odd configs that need to be forced to inline
(Kees Cook)
- one more quirk (Ilya Guterman)
- Fix for missing allocation of an integrity buffer for some cases
- Fix for a regression with ublk command cancelation
* tag 'block-6.15-20250515' of git://git.kernel.dk/linux:
ublk: fix dead loop when canceling io command
nvme-pci: add NVME_QUIRK_NO_DEEPEST_PS quirk for SOLIDIGM P44 Pro
nvme: all namespaces in a subsystem must adhere to a common atomic write size
nvme: multipath: enable BLK_FEAT_ATOMIC_WRITES for multipathing
nvmet: pci-epf: remove NVMET_PCI_EPF_Q_IS_SQ
nvmet: pci-epf: improve debug message
nvmet: pci-epf: cleanup nvmet_pci_epf_raise_irq()
nvmet: pci-epf: do not fall back to using INTX if not supported
nvmet: pci-epf: clear completion queue IRQ flag on delete
nvme-pci: acquire cq_poll_lock in nvme_poll_irqdisable
nvme-pci: make nvme_pci_npages_prp() __always_inline
block: always allocate integrity buffer when required
|
|
Pull io_uring fixes from Jens Axboe:
- Fix a regression with highmem and mapping of regions, where
the coalescing code assumes any page is directly mapped
- Fix an issue with HYBRID_IOPOLL and passthrough commands,
where the timer wasn't always setup correctly
- Fix an issue with fdinfo not correctly locking around reading
the rings, which can be an issue if the ring is being resized
at the same time
* tag 'io_uring-6.15-20250515' of git://git.kernel.dk/linux:
io_uring/fdinfo: grab ctx->uring_lock around io_uring_show_fdinfo()
io_uring/memmap: don't use page_address() on a highmem page
io_uring/uring_cmd: fix hybrid polling initialization issue
|
|
Pull xfs fixes from Carlos Maiolino:
"This includes a bug fix for a possible data corruption vector on the
zoned allocator garbage collector"
* tag 'xfs-fixes-6.15-rc7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: Fix comment on xfs_trans_ail_update_bulk()
xfs: Fix a comment on xfs_ail_delete
xfs: Fail remount with noattr2 on a v5 with v4 enabled
xfs: fix zoned GC data corruption due to wrong bv_offset
xfs: free up mp->m_free[0].count in error case
|
|
Pull ACPI fix from Rafael Wysocki:
"Fix ACPI PPTT parsing code to address a regression introduced recently
and add more sanity checking of data supplied by the platform firmware
to avoid using invalid data (Jeremy Linton)"
* tag 'acpi-6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PPTT: Fix processor subtable walk
|
|
Pull spi fixes from Mark Brown:
"A few small driver specific fixes, the most substantial one being the
Tegra one which fixes spurious errors with default delays for chip
select hold times"
* tag 'spi-fix-v6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-sun4i: fix early activation
spi: tegra114: Use value to check for invalid delays
spi: loopback-test: Do not split 1024-byte hexdumps
|
|
Pull regulator fix from Mark Brown:
"This fixes an invalid memory access in the MAX20086 driver which could
occur during error handling for failed probe due to a hidden use of
devres in the core DT parsing code"
* tag 'regulator-fix-v6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: max20086: fix invalid memory access
|
Sheetal
Mark Brown
Kuninori Morimoto
Naveen Manohar
Richard Fitzgerald
Stefan Binding
Charles Keepax
Mohammad Rafi Shaik
Shenghao Ding
Shuming Fan
Linus Torvalds
Wolfram Sang
Trond Myklebust