| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The current node limit of 64 breaks the functionality for a number of AI200
deployments that have up to 384 nodes. Raise the limit to 512.
Fixes: 27d5e84e810b ("net: qrtr: ns: Limit the total number of nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Link: https://patch.msgid.link/20260713145901.212396-1-youssef.abdulrahman@oss.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
cmd->dumpit callback can return a negative errno, causing an infinite
loop due to the while(len) condition. As the loop never terminates,
genl_mutex is never released, and other tasks waiting on it starve in D
state.
Check dumpit's return value, propagate it and jump to err_out on error.
Reported-by: syzbot+85d0bec020d805014a3a@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=85d0bec020d805014a3a
Fixes: d0796d1ef63d ("tipc: convert legacy nl bearer dump to nl compat")
Signed-off-by: Helen Koike <koike@igalia.com>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20260713204940.647668-1-koike@igalia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
nh_res_bucket_migrate() passes an uninitialized netlink_ext_ack to
call_nexthop_res_bucket_notifiers(). When
nh_notifier_res_bucket_info_init() fails (e.g. the kzalloc returns
-ENOMEM), the error is propagated back before any notifier sets
extack._msg, and the error path formats the stale pointer with
pr_err_ratelimited("%s\n", extack._msg). With CONFIG_INIT_STACK_NONE
this dereferences uninitialized stack memory:
Oops: general protection fault, probably for non-canonical address ...
KASAN: maybe wild-memory-access in range [...]
RIP: 0010:string (lib/vsprintf.c:730)
vsnprintf (lib/vsprintf.c:2945)
_printk (kernel/printk/printk.c:2504)
nh_res_bucket_migrate (net/ipv4/nexthop.c:1816)
nh_res_table_upkeep (net/ipv4/nexthop.c:1866)
rtm_new_nexthop (net/ipv4/nexthop.c:3323)
rtnetlink_rcv_msg (net/core/rtnetlink.c:7076)
netlink_sendmsg (net/netlink/af_netlink.c:1900)
Kernel panic - not syncing: Fatal exception
Zero-initialize extack so _msg is NULL on error paths that never set it.
Fixes: 7c37c7e00411 ("nexthop: Implement notifiers for resilient nexthop groups")
Reported-by: AutonomousCodeSecurity@microsoft.com
Signed-off-by: Xiang Mei (Microsoft) <xmei5@asu.edu>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260713221551.3344650-1-xmei5@asu.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The RSI attestation token init and continue calls must be issued from
the same CPU. arm_cca_report_new() currently snapshots the CPU number
and uses smp_call_function_single() to issue those calls on that CPU.
With CONFIG_DEBUG_PREEMPT=y, the smp_processor_id() call used for the
snapshot triggers a debug splat [0] because it runs in preemptible
context. The snapshot does not pin the task to that CPU; it is only used
to choose the target CPU for smp_call_function_single(), which can fail
if that CPU is no longer available.
Use migrate_disable() and issue the token init and continue operations
directly, without the smp_call_function_single() callbacks. This keeps
the token request sequence on the same CPU while preserving a sleepable
context for the GFP_KERNEL allocations needed after the init call.
[0]
BUG: using smp_processor_id() in preemptible [00000000] code: cca-workload-at/264
caller is debug_smp_processor_id+0x20/0x30
CPU: 0 UID: 0 PID: 264 Comm: cca-workload-at Not tainted 7.1.0-rc1-00044-g55542ab273f2 #80 PREEMPT(lazy)
Hardware name: linux,dummy-virt (DT)
Call trace:
[...]
check_preemption_disabled+0xd8/0xf8
debug_smp_processor_id+0x20/0x30
arm_cca_report_new+0x48/0x278
tsm_report_read+0x154/0x1f8
tsm_report_outblob_read+0x20/0x38
configfs_bin_read_iter+0x118/0x208
vfs_read+0x220/0x318
[...]
Fixes: 7999edc484ca ("virt: arm-cca-guest: TSM_REPORT support for realms")
Signed-off-by: Kohei Enju <enju.kohei@fujitsu.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
gtp1u_send_echo_resp() ignores skb_pull_data()'s return value. Its
caller gtp1u_udp_encap_recv() only guarantees 16 bytes (udphdr +
gtp1_header), but the pull requests 20 (gtp1_header_long + udphdr). For
a 16-19 byte echo request the pull fails and returns NULL without
advancing skb->data; execution continues, and the following skb_push()
plus the IP header pushed by iptunnel_xmit() move skb->data below
skb->head, tripping skb_under_panic().
Fix it by dropping the packet when skb_pull_data() fails.
skbuff: skb_under_panic: ...
kernel BUG at net/core/skbuff.c:214!
Call Trace:
skb_push (net/core/skbuff.c:2648)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:82)
gtp_encap_recv (drivers/net/gtp.c:701 drivers/net/gtp.c:808 drivers/net/gtp.c:920)
udp_queue_rcv_one_skb (net/ipv4/udp.c:2388)
...
Kernel panic - not syncing: Fatal exception in interrupt
Fixes: 9af41cc33471 ("gtp: Implement GTP echo response")
Reported-by: AutonomousCodeSecurity@microsoft.com
Signed-off-by: Xiang Mei (Microsoft) <xmei5@asu.edu>
Link: https://patch.msgid.link/20260710230724.942574-1-xmei5@asu.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Matthieu Baerts says:
====================
selftests: net: add missing kconfig and settings
When trying to execute the same selftests targets as the ones executed
on NIPA, but using containers with minimal tools, I got some issues
with a few tests.
Most of these issues are due to missing kernel config, but also too
short timeout:
- For the kconfig, these issues were not visible on NIPA, because some
targets are executed in the same runner, using the same kernel: the
config files of the different targets are merged. On my side, I
followed the recommended way, and only used the config file on top of
a 'make defconfig', revealing some missing kconfig's.
- For the timeout, that was not visible on NIPA either because the
Netdev machines are very powerful and the timeout is doubled when
using a debug kernel config (ovpn case), or because there are some
custom values on the test branches only (drv-net).
While at it, add an extra patch to display an error message in case of
failure with some netconsole scripts.
====================
Link: https://patch.msgid.link/20260710-net-sft-fix-containers-v1-0-a2915c294ef5@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In these netconsole tests, bash is used with errexit (set -e). It means
that if the busywait timeout, the tests finish without printing an error
message.
It is fine to ignore these errors, because the following validate_xxx
helpers will check the content of the output file, and exit with an
appropriated error message, e.g. FAIL: File was not generated.
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260710-net-sft-fix-containers-v1-7-a2915c294ef5@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This psp.py selftest was failing on my side when only using the
drivers/net config file on top of the default one -- the recommended way
to execute selftest targets.
It looks like some kernel config are needed to execute the new tc
commands.
Note that this was not visible on NIPA, because these tests are executed
with the drivers/net/hw ones, combining the two config files, and the hw
one contains the missing ones.
Fixes: 3f74d5bb807e ("selftests/net: Add env for container based tests")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Wei Wang <weibunny@fb.com>
Link: https://patch.msgid.link/20260710-net-sft-fix-containers-v1-6-a2915c294ef5@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The default timeout is 45 seconds, that's too low for the xdp.py test.
Indeed, this test can take up to 3 minutes with some debug kernel config
on NIPA. Set a timeout to 6 minutes, just to be on the safe side.
Note that the Fixes tag here points to the introduction of the xdp.py
test because I don't know when this test started to take more than 45
seconds. That's OK because a timeout of 6 minutes is not exaggerated.
Fixes: 1cbcb1b28b26 ("selftests: drv-net: Test XDP_PASS/DROP support")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260710-net-sft-fix-containers-v1-5-a2915c294ef5@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The default timeout is 45 seconds, that's too low for a few ovpn tests.
Indeed, these tests can take up to 50 seconds with some debug kernel
config on NIPA. Set a timeout to 90 seconds, just to be on the safe
side.
Note that the Fixes tag here points to the introduction of the ovpn
tests because I don't know when they started to take more than 45
seconds. That's OK because a timeout of 1.5 minutes is not exaggerated.
Fixes: 959bc330a439 ("testing/selftests: add test tool and scripts for ovpn module")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Acked-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20260710-net-sft-fix-containers-v1-4-a2915c294ef5@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
They are required to run the selftests:
- Tests are executed in v4 and v6.
- Virtual Ethernet are used between the different netns.
This has not been seen on NIPA before, because the 'ovpn' tests are
executed with the 'tcp_ao' ones, merging their config files. These two
kernel config are present in tools/testing/selftests/net/tcp_ao/config.
This issue is visible when only the ovpn config is used on top of the
default one. This is the recommended way to execute selftest targets.
Fixes: 959bc330a439 ("testing/selftests: add test tool and scripts for ovpn module")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Acked-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20260710-net-sft-fix-containers-v1-3-a2915c294ef5@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The kselftests doc mentions that a config file should be present "if a
test needs specific kernel config options enabled". This selftest
requires some kernel config, but no config file was provided.
We could say that a sub-target could use the parent's config file, but
the kselftests doc doesn't mention anything about that. Plus the
net/openvswitch target is the only net target without a config file.
Here is a new config file, which is a trimmed version of the net one,
with hopefully the minimal required kconfig on top of 'make defconfig'.
The Fixes tag points to the introduction of the net/openvswitch target,
just to help validating this target on stable kernels.
Fixes: 25f16c873fb1 ("selftests: add openvswitch selftest suite")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://patch.msgid.link/20260710-net-sft-fix-containers-v1-2-a2915c294ef5@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is required to use unshare(CLONE_NEWUSER).
This has not been seen on NIPA before, because the 'af_unix' tests are
executed with the 'net' ones, merging their config files. USER_NS is
present in tools/testing/selftests/net/config.
This issue is visible when only the af_unix config is used on top of the
default one. This is the recommended way to execute selftest targets.
Fixes: ac011361bd4f ("af_unix: Add test for sock_diag and UDIAG_SHOW_UID.")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260710-net-sft-fix-containers-v1-1-a2915c294ef5@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Will notes that the ARM64_WORKAROUND_REPEAT_TLBI name is potentially
misleading, and that it would be nice to rename that and add some
documentation. See:
https://lore.kernel.org/linux-arm-kernel/ajKn_Pt50CmOUrsP@willie-the-truck/
To that end, I've renamed the Kconfig symbol and hwcap from:
[CONFIG_]ARM64_WORKAROUND_REPEAT_TLBI
... to:
[CONFIG_]ARM64_WORKAROUND_REPEAT_TLBI_SYNC
... and I've added some rationale alongside the Kconfig. As the Kconfig
symbol isn't user selectable, the usual 'help' section won't appear in
menuconfig, so I've added this as a comment.
The rename was scripted with:
git grep -l REPEAT_TLBI | while read F; do
sed -i '{ s/WORKAROUND_REPEAT_TLBI\>/WORKAROUND_REPEAT_TLBI_SYNC/g }' $F;
done
Bikeshedding-wise, I considered a few names, including:
* ARM64_WORKAROUND_REPEAT_TLBI_SYNC
* ARM64_WORKAROUND_TLBI_REPEAT_SYNC
* ARM64_WORKAROUND_BROADCAST_TLBI_REPEAT_SYNC
... and I settled on ARM64_WORKAROUND_REPEAT_TLBI_SYNC to try keep
things simple, and to avoid unnecessary churn caused by moving
definitions to retain alphabetical order. I'm happy to defer to Will and
Catalin's preference.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Mengyuan Lou says:
====================
net: libwx: improve VF ethtool support
This series improves ethtool support for Wangxun VF drivers
(ngbevf and txgbevf) in libwx.
This series extends VF support by enabling:
ring parameter configuration via ethtool -G
interrupt coalescing configuration via ethtool -C
Patch 1 adds support for set_ringparam in wx_ethtool_ops_vf,
allowing VF users to adjust TX/RX descriptor ring sizes.
Patch 2 enables set_coalesce support for VF devices and updates
EITR programming to use the VF-specific register access helper.
====================
Link: https://patch.msgid.link/20260710015925.34769-1-mengyuanlou@net-swift.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for set_coalesce in wx_ethtool_ops_vf, which
is used to set interrupt coalescing parameters.
Update wx_write_eitr_vf() to use the same interrupt
moderation encoding as PF devices, since PF and VF share
the same register layout. And remove the now-unused
WX_VXITR_MASK definition.
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20260710015925.34769-3-mengyuanlou@net-swift.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for the set_ringparam in wx_ethtool_ops_vf,
which is used to set ring sizes for ngbevf and txgbevf.
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Link: https://patch.msgid.link/20260710015925.34769-2-mengyuanlou@net-swift.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
CCS read/write buffers are freed during BO destruction. In some cases,
BOs may be destroyed after the device is unbound but while the DRM
structure remains valid, leading to NULL pointer dereferences when
accessing device resources.
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 9376 Comm: xe_pat Not tainted 7.2.0-rc2+ #1 PREEMPT(lazy)
RIP: 0010:xe_sriov_vf_ccs_rw_update_bb_addr+0x4d/0xa0 [xe]
RSP: 0018:ffffcf304110b9c8 EFLAGS: 00010246
RAX: ffff8a85c38a0a00 RBX: 00000000810ef000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8a85c39c1888
RBP: ffffcf304110b9e8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8a85c39c1888
R13: 0000000000000000 R14: ffff8a85c39b4f28 R15: ffff8a85c3885000
FS: 0000000000000000(0000) GS:ffff8a878b809000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000010314a002 CR4: 0000000000772ef0
PKRU: 55555554
Call Trace:
<TASK>
xe_migrate_ccs_rw_copy_clear+0x98/0x120 [xe]
xe_sriov_vf_ccs_detach_bo+0x2c/0x60 [xe]
xe_ttm_bo_delete_mem_notify+0xc8/0xe0 [xe]
ttm_bo_cleanup_memtype_use+0x26/0x80 [ttm]
ttm_bo_release+0x29e/0x2d0 [ttm]
ttm_bo_fini+0x39/0x70 [ttm]
xe_gem_object_free+0x1f/0x30 [xe]
drm_gem_object_free+0x1d/0x40
ttm_bo_vm_close+0x5f/0x90 [ttm]
remove_vma+0x2c/0x70
tear_down_vmas+0x63/0xf0
exit_mmap+0x20d/0x3f0
__mmput+0x45/0x170
mmput+0x31/0x40
do_exit+0x2ba/0xac0
do_group_exit+0x2d/0xb0
__x64_sys_exit_group+0x18/0x20
x64_sys_call+0x14a0/0x2390
do_syscall_64+0xdd/0x640
? count_memcg_events+0xea/0x240
? handle_mm_fault+0x1ec/0x2f0
Fixes: 864690cf4dd6 ("drm/xe/vf: Attach and detach CCS copy commands with BO")
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260721052215.2267228-2-satyanarayana.k.v.p@intel.com
|
|
The arm64 UAPI exposes '__uint128_t' types in the members of
'struct user_fpsimd_state', 'struct user_pac_address_keys' and in the
signal frame via 'struct fpsimd_context'. Since the alignment of such
a type appears to be non-portable (16 bytes on arm64, 8 bytes on s390),
prefer the '__u128' typedef from uapi/linux/types.h, which makes the
alignment explicit and allows the definitions to be reused by other
host architectures.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Steffen Eiden <seiden@linux.ibm.com>
Cc: Andreas Grapentin <gra@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Martin <dave.martin@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The arm64 UAPI exposes some 128-bit integer types to represent things
such as fpsimd registers in the sigcontext. In preparation for defining
these using the '__u128' typedef implemented by uapi/linux/types.h, copy
that typedef over to the private linux/types.h header used by the tools
directory.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Matlack <dmatlack@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
On kTLS device-offload sockets, sendfile() with count > EOF can reach
->splice_eof() with a fully assembled but still-open TLS record left
pending. tls_device_splice_eof() only flushes partially sent records,
so an abrupt close() can drop the final record and the peer receives
a short file.
Fix tls_device_splice_eof() to also push pending open records.
This matches the software path, where splice EOF already flushes
pending open records.
Fixes: d4c1e80b0d1b ("tls/device: Use splice_eof() to flush")
Link: https://lore.kernel.org/netdev/CAMPsyauZ+jzG9AysO0FWv6ZY0kvCUpjX_U7o=oOjCuOQ87BCgg@mail.gmail.com/
Reported-by: Nils Juenemann <nils.juenemann@gmail.com>
Signed-off-by: Rishikesh Jethwani <rjethwani@purestorage.com>
Tested-by: Nils Juenemann <nils.juenemann@gmail.com>
Link: https://patch.msgid.link/20260709224436.1608993-2-rjethwani@purestorage.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the system is under extreme memory pressure, page allocations can
fail during the Rx buffer refill loop. If the number of buffers posted
to hardware falls below a critical low threshold and the refill loop
exits due to allocation failures, the queue can stall:
1. The device drops incoming packets because there are no descriptors.
2. Since no packets are processed, no Rx completions are generated.
3. Because no completions occur, NAPI is never scheduled, preventing
the refill loop from running again even after memory is freed.
This results in a permanent queue stall.
Resolve this by introducing a starvation recovery timer for each Rx queue.
If the number of buffers posted to hardware falls below a critical low
threshold, start a timer to periodically reschedule NAPI. Once NAPI runs
and successfully refills the queue above the threshold, the timer is
not rescheduled.
The threshold is set to 32 because a single maximum-sized Receive Segment
Coalescing (RSC) packet can consume up to 19 descriptors in the Rx path.
Lower thresholds (such as 8 or 16) would be insufficient to process a
complete maximum-sized RSC packet, risking packet drops or unexpected
hardware behavior under memory pressure. Setting the threshold to 32
guarantees a safe margin to handle at least one full RSC packet.
Cc: stable@vger.kernel.org
Fixes: 9b8dd5e5ea48 ("gve: DQO: Add RX path")
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Signed-off-by: Eddie Phillips <eddiephillips@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20260709211906.3322883-1-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add test cases for fwnode_for_each_child_node() API.
Test command:
$ ./tools/testing/kunit/kunit.py run property-entry
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260721105448.2109894-3-xu.yang_2@oss.nxp.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The PMCCNTR_EL0 in NVIDIA Olympus CPU may increment while
in WFI/WFE, which does not align with counting CPU_CYCLES
on a programmable counter. Add a MIDR range entry and refuse
PMCCNTR_EL0 for cycle events on affected parts so perf does
not mix the two behaviors.
Also keep PMCCNTR_EL0 unavailable to EL0 direct counter reads
on affected CPUs. When userspace counter access is enabled,
avoid setting PMUSERENR_EL0.CR for PMUs that must avoid
PMCCNTR_EL0, while still allowing direct reads from programmable
event counters. For 64-bit userspace CPU_CYCLES events on PMUs
without native long event counters, reject the event if the only
valid direct-read path would be PMCCNTR_EL0.
Signed-off-by: Besar Wicaksono <bwicaksono@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
of_node_init() is a static inline that references of_node_ktype when
CONFIG_OF_KOBJ=y. Any module that calls of_node_init() will therefore
have an unresolved reference to of_node_ktype at load time, because
the symbol is defined in drivers/of/kobj.c but was never exported.
This causes a modpost build error when CONFIG_OF_KOBJ=y and
CONFIG_DRIVER_PE_KUNIT_TEST=m:
ERROR: modpost: "of_node_ktype"
[drivers/base/test/property-entry-test.ko] undefined!
Add EXPORT_SYMBOL_IF_KUNIT(of_node_ktype) so that modules such as the
KUnit property-entry test can call of_node_init() without hitting this
linker error.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202607181651.RnUuV8n6-lkp@intel.com/
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202607181651.RnUuV8n6-lkp@intel.com/
Link: https://patch.msgid.link/20260721105448.2109894-2-xu.yang_2@oss.nxp.com
[ Add empty line before the kunit include. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The K3 SPI controller is compatible with K1, so allow K3 device trees to
use "spacemit,k1-spi" as fallback.
Signed-off-by: Cody Kang <cody.kang.hk@outlook.com>
Signed-off-by: Zhengyu He <hezhy472013@gmail.com>
Link: https://patch.msgid.link/20260717-k3-com260-spi-v7-2-rc2-b4-preview-20260716-v1-2-969a1b0f783f@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Graviton5 uses a customised CMN-S3 implementation where certain
discovery registers report zeroed fields. Add the following workarounds:
- Introduce a dedicated ACPI HID to identify the Graviton5 CMN variant.
- Derive the DTC domain from the XP node ID, since the unit info
register reports it as zero.
- Set the DTC logical ID from the XP's logical ID, since the node info
register's logical ID field is also zeroed.
Signed-off-by: Aviv Bakal <avivb@amazon.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The amount of data we need to store all the per-DTM counter and
watchpoint allocations is already testing the limits of hw_perf_event,
and future CMNs are only likely to keep growing larger, so move these
arrays out to separate memory allocations. As part of that we can use
an explicit union for allocating cycle counters to dtc_cycles events,
which is arguably nicer anyway.
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
machine_constraints_voltage() currently applies apply_uV against the
machine-supplied [min_uV, max_uV] range, and only afterwards clamps
that range down to what the regulator can actually supply (via
ops->list_voltage()).
If the machine-supplied range is wider than the regulator's actual
range, apply_uV's rounding can pick a selector outside the (correct)
clamped range, so the regulator ends up programmed outside its clamped
min/max. At bring-up this shows up as a voltage read-back outside the
clamped range.
Fix this by moving the clamping block ahead of the apply_uV block, so
apply_uV always targets an already-clamped range. Whether apply_uV
should run is decided from the unclamped constraints beforehand and
stored in a local bool, since clamping must not itself change whether
apply_uV fires.
No functional change to the clamping logic itself, only its position
relative to apply_uV. Its early return 0 exits become fallthroughs
since the apply_uV logic now follows it.
Assisted-by: Claude:claude-sonnet-5
Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Link: https://patch.msgid.link/20260720-b4-regulator-core-clamp-voltage-v1-1-8e5eec076a8e@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add DPP AKM handling and RSN parsing support. Map DPP to the firmware
wpa_auth value and recognize DPP public action frames in the P2P
action-frame TX path.
Gate sup_wpa programming on firmware supplicant capability. Disable it
only when the selected connection mode does not use firmware supplicant.
This keeps pure SAE and 802.1X firmware-supplicant paths intact while
avoiding stale firmware supplicant state for DPP.
Signed-off-by: Kurt Lee <kurt.lee@cypress.com>
Signed-off-by: Jason Huang <jason.huang2@infineon.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260715084718.667522-1-Jason.Huang2@infineon.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Jeff Chen says:
===============
wifi: nxp: patches for wireless-next
In nxpwifi, introduce initial driver support for NXP IW61x Wi-Fi chipsets.
The driver supports 802.11ac/ax, SDIO interface, Station and uAP modes.
===============
[list the full vendor directory in MAINTAINERS]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
For association and link reconfiguration response, parse
and store the enhanced BSS parameter change counter out
of the enhanced critical updates field in the multi-link
common info or per-STA profile. These are required for
UHR connections.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260714134154.adb9fc29252d.I625580fbadbbf4a1440d88d3675586477f1a3263@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Refactor the parsing code a bit, introducing specific error
messages for the various failures and moving the BSS parameter
change count parsing out a level to be easier to extend for
UHR.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260714134154.e2fb22738aa1.Id86c1bd6ddb5ec13ad9cbf24fd36b8246f351fe6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The cf1 offset is not included when sending the chandef leading
to incorrect channel resolution in usermode. Include it.
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20260721053958.227853-1-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
During association completion, mac80211 must notify the driver before
destroying the association link context. Previously, the driver callback
drv_mgd_complete_tx() was invoked after ieee80211_destroy_assoc_data(),
which left the driver with no link context to perform per-link resource
cleanup operations.
Move drv_mgd_complete_tx() invocation into ieee80211_destroy_assoc_data(),
before link destruction. This ensures the driver has access to link context
when needed for cleanup.
Similar for ieee80211_destroy_auth_data().
On failed associations, the driver now has the link available to safely
cancel any active sessions.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Assisted-by: GitHubCopilot:gpt-5.3-codex
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260717171018.3afb91fcaac7.I308890d98c35acf1ceb79c295526d18c8eb164b9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Due to reshuffling, the min_def is no longer calculated
taking a newly created monitor interface into account as
link->conf->chanctx_conf is only assigned after the new
bandwidth has been calculated. To handle this, rsvd_for
is assigned, but the monitor code didn't handle that.
Fix this by checking rsvd_for for monitor explicitly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260715213312.9fe95421689d.I24e08f95e97deb46c6393ee732057d63e6436a2e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently, the FSP receive message code will try to allocate whatever
was sent without checking it at all. But the actual size allowed is
limited to 1024 anyway, so reject any messages over that size as bogus.
Signed-off-by: Eliot Courtney <ecourtney@nvidia.com>
Link: https://patch.msgid.link/20260703-blackwell-fixes-v2-1-8e3d8bc32bb9@nvidia.com
[acourbot: use `SZ_1K` constant for size.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
|
Now that timestamping is controlled through an NDO, we can simply
call phylink_mii_ioctl() to handle ioctls.
The only functional difference is that phylink_mii_ioctl() ->
phy_mii_ioctl() can handle SIOCSHWTSTAMP, but this no longer happens
as this ioctl is not longer dispatched to the ndo_eth_ioctl().
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260718143848.677531-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add quirk for a copper SFP+ module that identifies itself as "OEM"
"HC-10GE-113C". It uses RollBall protocol to talk to the PHY.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260719100158.874882-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mctp_i3c_mod_init() registers the I3C bus notifier and then walks the
existing buses with i3c_for_each_bus_locked(mctp_i3c_bus_add_new, NULL)
before registering the I3C device driver. If i3c_driver_register()
fails, the function returns the error directly, leaving the notifier
registered and every mctp_i3c_bus object created for the existing buses
allocated. The notifier is left pointing into the module that failed to
load and the bus list is leaked.
Mirror the module exit path on this failure: unregister the notifier and
tear down the buses that were added before returning the error.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code.
Fixes: c8755b29b58e ("mctp i3c: MCTP I3C driver")
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Acked-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20260715072517.13216-1-mhun512@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit bb1256e0ddc7 ("ACPI: battery: fix incorrect charging status when
current is zero") added a charge rate check to validate the "charging"
status of the battery, but that check is reported to cause some systems
to misbehave [1]. Namely, it causes the "not charging" status to be
reported on them while the battery is in fact charging (and they were
correctly reporting the "charging" status in that case previously).
To address that, check if the battery is full in addition to checking
the charge rate when the "charging" status is reported by the platform
firmware and only change it to "not charging" if the battery is full and
its charge rate is zero or it is unknown.
Fixes: bb1256e0ddc7 ("ACPI: battery: fix incorrect charging status when current is zero")
Reported-by: golne tree <lrepper@outlook.de>
Tested-by: golne tree <lrepper@outlook.de>
Closes: https://lore.kernel.org/linux-acpi/AM9P193MB158895CFE0DDFA62FCD1DA5ED0F22@AM9P193MB1588.EURP193.PROD.OUTLOOK.COM/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/6286911.lOV4Wx5bFT@rafael.j.wysocki
|
|
Prevent kernel-doc warnings by converting 2 functions to kernel-doc
format:
Warning: ./include/linux/acpi_pmtmr.h:29 This comment starts with '/**', but isn't a kernel-doc comment.
* Register callback for suspend and resume event
Warning: ./include/linux/acpi_pmtmr.h:37 This comment starts with '/**', but isn't a kernel-doc comment.
* Remove registered callback for suspend and resume event
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260720032341.3087008-3-rdunlap@infradead.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
proc_sctp_do_udp_port() starts per-net SCTP UDP tunneling sockets when
net.sctp.udp_port is set, and stops/restarts them when the sysctl value
changes. The netns exit path does not stop these sockets, so a namespace
can be torn down while its SCTP UDP tunnel sockets are still installed.
Close the UDP tunnel sockets from sctp_ctrlsock_exit() after unregistering
the per-net sysctl table. This prevents new sysctl writes from racing in
while the sockets are being released, and closes the sockets before the
control socket is destroyed.
Fixes: 046c052b475e ("sctp: enable udp tunneling socks")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/b9f1f02b0780ad6a719e2413f5f0bb8eb7702d94.1782585631.git.roxy520tt%40gmail.com
Signed-off-by: Zhiling Zou <roxy520tt@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/6dab75f22855cb219e2e30a5497cab03b970ab91.1784033357.git.roxy520tt@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
proc_sctp_do_auth() updates the SCTP control socket after changing
net.sctp.auth_enable. The handler gets the per-net SCTP state from
ctl->data, so an already opened sysctl file can still target a network
namespace while that namespace is being torn down.
SCTP previously registered its per-net sysctls from sctp_defaults_init(),
while the control socket is created later from sctp_ctrlsock_init(). This
exposed a window during initialization where auth_enable was writable
before net->sctp.ctl_sock existed, and a teardown window where auth_enable
stayed writable after inet_ctl_sock_destroy() had released the control
socket.
Move the per-net SCTP sysctl registration into sctp_ctrlsock_init() after
sctp_ctl_sock_init() succeeds, and unregister the sysctl table before
destroying the control socket in sctp_ctrlsock_exit(). If sysctl
registration fails after the control socket was created, destroy the
control socket in the same init path.
Make sctp_sysctl_net_unregister() tolerate a missing header and clear the
saved pointer so init-error and exit paths can safely share the unregister
helper.
Fixes: 15649fd5415e ("sctp: sysctl: auth_enable: avoid using current->nsproxy")
Cc: stable@vger.kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Co-developed-by: Qi Tang <tpluszz77@gmail.com>
Signed-off-by: Qi Tang <tpluszz77@gmail.com>
Signed-off-by: Zhiling Zou <roxy520tt@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/390cd5e91ed60eea27b0b64d0468301a9e73b808.1784033357.git.roxy520tt@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Avoid kernel-doc warnings by using the correct struct member names:
Warning: ./include/acpi/acpi_bus.h:429 struct member 'crs_csi2_local' not described in 'acpi_device_software_node_port'
Warning: ./include/acpi/acpi_bus.h:429 Excess struct member 'crs_crs2_local' description in 'acpi_device_software_node_port'
Warning: ./include/acpi/acpi_bus.h:445 struct member 'nodeptrs' not described in 'acpi_device_software_nodes'
Warning: ./include/acpi/acpi_bus.h:445 Excess struct member 'nodeprts' description in 'acpi_device_software_nodes'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260720032341.3087008-2-rdunlap@infradead.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Fix kernel-doc warnings by using the correct function parameter name:
Warning: ./drivers/acpi/fan.h:83 function parameter 'speed' not described in 'acpi_fan_speed_valid'
Warning: ./drivers/acpi/fan.h:83 Excess function parameter 'speeed' description in 'acpi_fan_speed_valid'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260720032341.3087008-1-rdunlap@infradead.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When processing a RESET_IN_REQUEST from a peer,
sctp_process_strreset_inreq() derives the stream count from the
parameter length but does not check whether the resulting
RESET_OUT_REQUEST would exceed SCTP_MAX_CHUNK_LEN.
The OUT request header (sctp_strreset_outreq, 16 bytes) is 8 bytes
larger than the IN request header (sctp_strreset_inreq, 8 bytes).
Generally, the IP payload is bounded to 65535 bytes, so the stream
list cannot be large enough to trigger the overflow. However, on
interfaces with MTU > 65535 (e.g., loopback with IPv6 jumbograms), a
stream list that fits within the incoming IN parameter can cause a
__u16 overflow in sctp_make_strreset_req() when computing the OUT
request size, leading to an undersized skb allocation and a kernel
BUG:
net/core/skbuff.c:207 skb_panic
net/core/skbuff.c:2625 skb_put
net/sctp/sm_make_chunk.c:1535 sctp_addto_chunk
net/sctp/sm_make_chunk.c:3695 sctp_make_strreset_req
net/sctp/stream.c:655 sctp_process_strreset_inreq
The local setsockopt path validates the generated reset request size.
However, for an incoming-only reset, it accounts for the smaller IN
request even though the peer must generate an OUT request with the same
stream list. Such a request cannot be completed successfully by the
peer.
Reject peer IN requests whose corresponding OUT request would exceed
SCTP_MAX_CHUNK_LEN. Also tighten the local check so it does not send an
IN request that would require an oversized OUT request from the peer.
Fixes: 7f9d68ac944e ("sctp: implement sender-side procedures for SSN Reset Request Parameter")
Reported-by: AutonomousCodeSecurity@microsoft.com
Closes: https://lore.kernel.org/all/20260707203215.2752-1-blbllhy@gmail.com/
Suggested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Cen Zhang (Microsoft) <blbllhy@gmail.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20260710010718.20318-1-blbllhy@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add myself as a reviewer for the BPF areas where I've been active.
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/bpf/20260721172104.3689982-1-ihor.solodrai@linux.dev
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
afiucv_hs_callback_syn() allocates the child socket with GFP_ATOMIC.
If the allocation fails, nsk is NULL.
The connection-refused path is entered when the listen state check
fails, the accept backlog is full, or nsk is NULL. The code
unconditionally calls iucv_sock_kill(nsk) in that path.
iucv_sock_kill() does not accept a NULL socket pointer and immediately
dereferences sk via sock_flag(sk, SOCK_ZAPPED). When nsk is NULL,
calling iucv_sock_kill(nsk) results in a NULL pointer dereference.
Only call iucv_sock_kill() when a child socket was successfully
allocated.
Fixes: 3881ac441f64 ("af_iucv: add HiperSockets transport")
Cc: stable@vger.kernel.org
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Hidayath Khan <hidayath@linux.ibm.com>
Link: https://patch.msgid.link/20260709191732.124092-1-hidayath@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver has a match table for the i2c bus wired into its driver
structure, but the table is not exported with MODULE_DEVICE_TABLE().
Add the missing MODULE_DEVICE_TABLE() entry so module alias information
is generated for automatic module loading.
This is a source-level fix. It does not claim dynamic hardware
reproduction; the evidence is the driver-owned match table, its use by
the driver registration structure, and the missing module alias
publication.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260704152428.51844-1-pengpeng@iscas.ac.cn
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
Youssef Samir
Helen Koike
Xiang Mei (Microsoft)
Kohei Enju
Jakub Kicinski
Matthieu Baerts (NGI0)
Mark Rutland
Mengyuan Lou
Satyanarayana K V P
Will Deacon
Rishikesh Jethwani
Eddie Phillips
Xu Yang
Besar Wicaksono
Zhengyu He
Aviv Bakal
Robin Murphy
Kamal Wadhwa
Jason Huang
Johannes Berg
Lachlan Hodges
Pagadala Yesu Anjaneyulu
Eliot Courtney
Maxime Chevallier
Aleksander Jan Bajkowski
Myeonghun Pak
Rafael J. Wysocki
Randy Dunlap
Zhiling Zou
Cen Zhang (Microsoft)
Ihor Solodrai
Hidayath Khan
Pengpeng Hou