| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The spib_addr register will indicate to the host DMA where the position
is in the buffer currently processed by host SW. The register is ignored
by the host DMA if SPIB is disabled. Reset it to 0 before disabling SPIB.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260713084650.4138172-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Replace mipi_dsi_* functions with their non-deprecated mipi_dsi_*_multi
counterparts. This change reduces error-checking boilerplate and improves
readability.
Signed-off-by: Nicolás Antinori <nico.antinori.7@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20260706224414.1015766-1-nico.antinori.7@gmail.com
|
|
rdt_resource::ctrl_domains and rdt_resource::mon_domains are RCU lists with
entries added and removed by architecture from CPU hotplug callbacks that are
run with cpus_write_lock() held. These lists can be traversed safely from
resctrl fs by either holding cpus_read_lock() or relying on an RCU read-side
critical section.
resctrl fs traversals of rdt_resource::ctrl_domains and
rdt_resource::mon_domains are done using list_for_each_entry() with
cpus_read_lock() held. Similarly, x86 architecture callbacks use
list_for_each_entry() expecting that resctrl fs makes the call with
cpus_read_lock() held. Inconsistently, a lockdep_assert_cpus_held() precedes
the list_for_each_entry() call with varying distance to document this safe RCU
list traversal.
In preparation for an upcoming traversal of rdt_resource::ctrl_domains that
needs to be done from RCU read-side critical section there is a requirement
for developers to always know exactly in which context the list is being
traversed.
Replace the list_for_each_entry() traversals of RCU list with
list_for_each_entry_rcu() to document that an RCU list is being traversed
while making use of the built-in lockdep expression that additionally
documents that it is cpus_read_lock() that enables the list to be
traversed from non-RCU protection. Only revert to documenting the
safety of traversal using a comment when lockdep does not have needed
visibility in functions called via smp_call*().
The lockdep expression within list_for_each_entry_rcu() depends on
RCU_EXPERT that is not set in a typical debug kernel so keep the existing
lockdep_assert_cpus_held() that is active with CONFIG_LOCKDEP=y found in
typical debug kernel.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/d9373f8da8ffde667740e186ffc96ab69628ac9a.1783963505.git.reinette.chatre@intel.com
|
|
In fcg_read_stats(), the memset() that zeroes the output @stats array
sits after the calloc() failure check. When calloc() fails, the
function returns without writing @stats.
The caller in main() declares acc_stats uninitialized, passes it as
the @stats argument, and then reads it unconditionally:
__u64 acc_stats[FCG_NR_STATS];
fcg_read_stats(skel, acc_stats);
stats[i] = acc_stats[i] - last_stats[i]; // reads garbage
Because fcg_read_stats() returns void, the caller cannot detect the
failure. Reading the uninitialized array is undefined behavior, and
the garbage is further copied into last_stats via memcpy(), corrupting
the baseline used by the next interval.
This regression was introduced by commit cabd76bbc036 ("tools/sched_ext:
scx_flatcg: fix potential stack overflow from VLA in fcg_read_stats"),
which replaced the VLA with calloc() and inserted the failure check
before the existing memset().
Move the memset() above the calloc() failure check so @stats is always
zeroed regardless of allocation outcome.
Fixes: cabd76bbc036 ("tools/sched_ext: scx_flatcg: fix potential stack overflow from VLA in fcg_read_stats")
Signed-off-by: Liang Luo <luoliang@kylinos.cn>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
With LTO enabled the compiler assumes that the vDSO functions are not
used and optimizes them away completely. Currently this happens to
__vdso_clock_getres(), __vdso_clock_gettime(), __vdso_getrandom(),
__vdso_gettimeofday() and __vdso_riscv_hwprobe().
Disable LTO for the vDSO, as these functions are hand-optimized anyways.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202606301855.WvkSC4kD-lkp@intel.com/
Fixes: 021d23428bdb ("RISC-V: build: Allow LTO to be selected")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://patch.msgid.link/20260701-riscv-vdso-lto-v1-1-89db0cd82077@linutronix.de
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
When port I/O is not supported, exposing the port-string helpers is both
unnecessary and can make clang diagnose null-pointer arithmetic from the
PCI_IOBASE based address expression. Keep the MMIO string helpers
available as before, but only provide the port I/O variants when
CONFIG_HAS_IOPORT is enabled.
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260703122832.15984-2-cuiyunhui@bytedance.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
After a successful cache synchronization, regcache_sync() clears
cache_dirty. If rewriting a selector register later fails, the cache
and hardware become inconsistent while the cache still appears clean.
Update cache_dirty to reflect the cache and hardware state when
selector register rewriting fails.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260713050312.38729-3-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
regcache_sync() currently stores the return value from both cache
synchronization and selector register rewriting in the same variable.
As a result, a successful selector register rewrite can overwrite an
earlier cache synchronization error, causing regcache_sync() to return
success even though synchronization failed.
Track the two operations with separate return variables and preserve the
cache synchronization error. Errors from rewriting selector registers are
returned only if cache synchronization completed successfully.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260713050312.38729-2-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The FUNCTION_ALIGNMENT_4B select forces the whole kernel to be built
with -fmin-function-alignment=4. This alignment is only needed so the
patchable-function-entry NOPs, which arch/riscv/Makefile emits under
CONFIG_DYNAMIC_FTRACE, can be patched reliably on RISCV_ISA_C=y builds
where compressed instructions otherwise allow 2-byte function
alignment.
The select is currently gated on HAVE_DYNAMIC_FTRACE, a capability bit
that is selected whenever the toolchain supports dynamic ftrace, rather
than on whether tracing is actually enabled. As a result every
RISCV_ISA_C=y build gets 4-byte function alignment across the entire
kernel even when function tracing is disabled, needlessly growing the
kernel image and wasting instruction cache for a feature that is not
in use.
Gate the select on DYNAMIC_FTRACE instead, matching the condition under
which arch/riscv/Makefile emits -fpatchable-function-entry, so the
alignment is only applied when it is actually needed.
Fixes: c41bf4326c7b ("riscv: ftrace: align patchable functions to 4 Byte boundary")
Signed-off-by: Rui Qi <qirui.001@bytedance.com>
Link: https://patch.msgid.link/20260706130415.463682-1-qirui.001@bytedance.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
section_activate() does not flush TLB after populating new vmemmap
pages. On most architectures, this is okay. However it is a problem on
RISC-V since there the TLB caching non-present entries is permitted,
which causes spurious faults on some hardwares.
This seems to be most easily reproduced with DEBUG_VM=y and
PAGE_POISONING=y, which causes these newly mapped struct pages to be
poisoned i.e. written to immediately after mapping.
Extend the RISC-V flush_cache_vmap() to also handle the vmemmap range,
and call it after hotplugging vmemmap, which gets the possible spurious
fault handled in the exception handler.
At least for now, the only other architecture with both
SPARSEMEM_VMEMMAP and flush_cache_vmap() is PowerPC, which has a similar
problem with newly valid PTEs. But there flush_cache_vmap() is just a
ptesync. So it should be safe to do this for generic code while having
minimal performance impact.
Suggested-by: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Reviewed-by: Muchun Song <muchun.song@linux.dev>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Link: https://patch.msgid.link/20260713-mark-after-vmemmap-populate-v6-2-b945ceba29d4@iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
None of the code relating to mark_new_valid_map() does anything useful
without CONFIG_64BIT=y && CONFIG_MMU=y, because the
new_valid_map_cpus_check code is only used if CONFIG_64BIT, and the
exception codes checked there can only happen with CONFIG_MMU=y.
Therefore, make these conditional on CONFIG_64BIT=y && CONFIG_MMU=y to
simplify programming, since we do not have to handle CONFIG_MMU=n when
changing this code in the future. This also removes some unused code on
the entry path for CONFIG_MMU=n.
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Link: https://patch.msgid.link/20260713-mark-after-vmemmap-populate-v6-1-b945ceba29d4@iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
DMABUF pages are not supported for iommufd access pinning.
iommufd_access_pin_pages() returns struct page pointers for
in-kernel CPU access, but DMABUF-backed iopt_pages do not carry
a userspace address that can be passed to the GUP path.
iopt_pages_rw_access() already rejects IOPT_ADDRESS_DMABUF before doing
CPU access. Apply the same rejection to iopt_area_add_access() before it
takes pages->mutex and calls iopt_pages_fill_xarray().
Otherwise a DMABUF-backed iopt_pages can reach the hole-fill path, where
pfn_reader_user_pin() interprets the union as uptr and
calls pin_user_pages_fast()/pin_user_pages_remote().
This fix also avoids the lockdep warning reported from that path, where
pages_dmabuf_mutex_key is held while gup_fast_fallback() may acquire
mmap_lock.
Link: https://patch.msgid.link/r/CD68F549BF3761B7+20260709050800.520607-1-peiyang_he@smail.nju.edu.cn
Reported-by: Peiyang He <peiyang_he@smail.nju.edu.cn>
Closes: https://lore.kernel.org/all/E8540D7D05768C91+8b2ef227-3368-494e-909d-7b28e1489dfb@smail.nju.edu.cn/
Fixes: 71db84a092c3 ("iommufd: Add DMABUF to iopt_pages")
Cc: stable@vger.kernel.org
Tested-by: Peiyang He <peiyang_he@smail.nju.edu.cn>
Signed-off-by: Peiyang He <peiyang_he@smail.nju.edu.cn>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Add node for iMX8MQ Display Controller Subsystem.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Esben Haabendal <esben@geanix.com>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
iommufd_hwpt_replace_device() calls:
iommufd_auto_response_faults(hwpt, old_handle);
passing the *new* hwpt together with the handle of
the device's *old* domain. This should be a parameter mismatch:
1. Semantically, iommufd_auto_response_faults(x, handle) scans
x->fault's deliver list and response xarray for groups matching
"handle". A group is queued under the hwpt that was attached at
fault-delivery time. old_handle is fetched *before* the domain switch,
so its group lives on old->fault, not on the new hwpt->fault.
2. Historically, the first argument was "old". The routine was
introduced by commit b7d8833677ba ("iommufd: Fault-capable hwpt
attach/detach/replace") as __fault_domain_replace_dev() in
fault.c, correctly calling iommufd_auto_response_faults(old, curr).
Commit fb21b1568ada ("iommufd: Make attach_handle generic than
fault specific") moved this into iommufd_hwpt_replace_device() in
device.c and swapped it to "hwpt". This should be a refactor regression,
not an intentional change.
Fix this by passing "old" instead.
Link: https://patch.msgid.link/r/9D652384339C69D5+20260710122952.885325-1-peiyang_he@smail.nju.edu.cn
Fixes: fb21b1568ada ("iommufd: Make attach_handle generic than fault specific")
Cc: stable@vger.kernel.org
Signed-off-by: Peiyang He <peiyang_he@smail.nju.edu.cn>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Jumping over the allocation of the link_info for a missing dev breaks
the build:
/tmp/next/build/sound/soc/generic/simple-card.c:676:3: error: cannot jump from this goto statement to its label
676 | goto end;
| ^
/tmp/next/build/sound/soc/generic/simple-card.c:679:20: note: jump bypasses initialization of variable with __attribute__((cleanup))
679 | struct link_info *li __free(kfree) = kzalloc_obj(*li);
| ^
Fixes: 7f20b9b05b3a ("ASoC: simple-card: merge extra method into simple_parse_of()")
Link: https://patch.msgid.link/20260713-asoc-fix-simple-card-build-v1-1-671ad44ad1a0@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add PDM microphone sound card support, configure the pinmux.
This sound card supports recording sound from PDM microphone and
convert the PDM format data to PCM data.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Add WM8524 sound card support which connects to SAI1.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
The board uses GPIO-controlled muxes to route shared signals between
different functions.
Add the audio-related mux states for:
- selecting PDM or CAN1
- selecting SAI1 or M.2
- enabling the SAI1 audio path or not
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
A probe-time deadlock can occur between the dequeue worker and
drm_client_register(). During probe, drm_client_register() holds
clientlist_mutex and calls the fbdev hotplug callback, which triggers an
atomic commit that ends up sleeping in virtio_gpu_queue_ctrl_sgs()
waiting for virtqueue space. The dequeue worker that would free that
space calls virtio_gpu_cmd_get_display_info_cb(), which invokes
drm_kms_helper_hotplug_event() -> drm_client_dev_hotplug(), attempting
to acquire the same clientlist_mutex. Since wake_up() is only called
after the resp_cb loop, the probe thread is never woken and both threads
deadlock.
Fix this by removing the hotplug notification from
virtio_gpu_cmd_get_display_info_cb(). The display data (outputs[i].info)
is still updated synchronously in the callback.
For the init path, drm_client_register() already fires an initial
hotplug when the client is registered, which picks up the connector
state updated by display_info_cb.
For the runtime config_changed path, add a wait_event_timeout() in
config_changed_work_func() so that display_info_cb updates the connector
data before the hotplug notification is sent. Also replace
drm_helper_hpd_irq_event() with drm_kms_helper_hotplug_event() since
virtio-gpu never calls drm_kms_helper_poll_init() and thus
drm_helper_hpd_irq_event() always returns false without doing anything.
Fixes: 27655b9bb9f0 ("drm/client: Send hotplug event after registering a client")
Closes: https://syzkaller.appspot.com/bug?id=d6dd6f86d3aaf7eebe7406e45c1c6e549453f224
Closes: https://syzkaller.appspot.com/bug?id=908bd910da5dd79b88de4cf7baf376cc873a922e
Suggested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Ryosuke Yasuoka <ryasuoka@redhat.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patch.msgid.link/20260713-virtiogpu_syzbot-v2-1-2958fa37d46d@redhat.com
|
|
This was there to be able to patch out locking instructions when running
a SMP kernel build on a UP CPU. The times are long gone when single-CPU
x86 machines were relevant so drop that machinery and simplify the code
considerably.
LOCK_PREFIX needs to stay for when one wants to do a UP build for
whatever reason. That'll go away when CONFIG_SMP becomes unconditional.
Kill a bunch of leftover, unused prototypes while at it.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Link: https://lore.kernel.org/r/20260328081634.797552-1-rppt@kernel.org
|
|
TQMa91 has a 512MiB RAM variant for which the edgelock memory location
exceeds the valid memory area.
Signed-off-by: Alexander Feilke <Alexander.Feilke@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Add samsung,picophy-pre-emp-curr-control and
samsung,picophy-dc-vol-level-adjust using the same values as other
TQ-Systems GmbH mainboards.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
This device is used for 'sound-dai' and needs #sound-dai-cells. dtbs_check
raises a warning regarding sound_dai_property.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Add the overlay for the Tianma TM070JVHG33 LVDS display.
Signed-off-by: Martin Schmiedel <Martin.Schmiedel@tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Add the overlay for the Tianma TM070JVHG33 LVDS display.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Add the overlay for the Tianma TM070JVHG33 LVDS display.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Tian Shu Qiu and Bingbu Cao are maintainers and reviewers of a bunch of
media drivers (7 and 9 respectively). Bingbu's e-mail address has changed
and Tian Shu's is bouncing.
Update Bingbu's e-mail address, remove Bingbu as a maintainer from Intel
specific drivers and remove Tian Shu as maintainer. Also add Dave
Stevenson as a maintainer and David Heidelberg as a reviewer for the
imx355 driver.
Also add Bingbu and Tian Shu to CREDITS.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Yong Zhi <yong.zhi@intel.com>
Cc: Dan Scally <dan.scally@ideasonboard.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Lixu Zhang <lixu.zhang@intel.com>
Cc: linux-media@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-staging@lists.linux.dev
Co-developed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Acked-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Bingbu Cao <bingbu.cao@amd.com>
|
|
If start_streaming fails, then all queued buffers must be
returned to vb2 in state QUEUED.
Otherwise it will trigger a WARN_ON.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Tested-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
In em28xx_free_device() dev_info passed &dev->intf->dev,
but that device can be freed already.
Just use pr_info instead.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Tested-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Use vb2_video_unregister_device instead of video_unregister_device
to ensure any streaming is correctly stopped at unregister time.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Tested-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Drop the em28xx_v4l2 'users' field, use v4l2_fh_is_singular_file()
instead.
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Tested-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The em28xx driver creates a lot of video devices, but life-time management
is really bad. Instead use the struct v4l2_device release() callback to
have a single place where memory can be freed once the last user has gone.
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Tested-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
When my em28xx USB device that uses the i2c tvp5150 driver is
disconnected, it crashes.
The cause is that the tvp5150 i2c module uses v4l2_async, but
the em28xx driver does not since it predates v4l2_async.
In that corner case sd->asc_list is empty, so
v4l2_async_unregister_subdev() never calls v4l2_device_unregister_subdev().
Modify the code so that, if sd->asc_list is empty,
v4l2_device_unregister_subdev() is still called.
Fixes: 28a1295795d8 ("media: v4l: async: Allow multiple connections between entities")
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Correct the spelling of "privilege" in the DRIVER_RENDER Rustdoc.
Signed-off-by: Younes Akhouayri <git@younes.io>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260712-docs-drm-feat-render-rustdoc-typo-v1-1-c9df1cbbce4b@younes.io
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Applies the same treatment as commit 7cf6dd467e87 ("drm/virtio:
Don't attach GEM to a non-created context in gem_object_open()")
to virtio_gpu_gem_object_close() to avoid trying to detach
a resource that was never attached due to a context
never being created when context_init is supported.
Fixes: 086b9f27f0ab ("drm/virtio: Don't create a context with default param if context_init is supported")
Cc: <stable@vger.kernel.org> # v6.14+
Signed-off-by: Jason Macnak <natsu@google.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patch.msgid.link/20260625170828.3335431-1-natsu@google.com
|
|
Add error handling to devm_kasprintf functions in imx9_soc_probe().
Assisted-by: gkh_clanker_2000
Cc: Frank Li <Frank.Li@nxp.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Griffin Kroah-Hartman <griffin@kroah.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Correct spaces or mix of tabs+spaces into proper tab-indented lines.
No functional impact (same DTB).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Correct spaces or mix of tabs+spaces into proper tab-indented lines.
No functional impact (same DTB).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Correct spaces or mix of tabs+spaces into proper tab-indented lines.
No functional impact (same DTB).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Moving a GpuVaAlloc or GpuVmBo between threads currently forces drivers
to write their own unsafe Send and Sync impls. Provide the markers in
the abstraction instead.
GpuVaAlloc wraps only uninitialised memory and exposes none of it.
GpuVmBo hands out the driver data and GEM object by shared reference and
drops them in its deferred put; the DriverGpuVm trait already guarantees
both are Send + Sync, so both impls are unconditional.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://patch.msgid.link/20260611-gpuvm-sync-send-v4-2-6c7f4ab2778a@google.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
|
|
DriverGpuVm permitted !Send/!Sync associated data on an abstraction whose
handles are shared and dropped across threads: obtain() runs from many
threads and the VA API performs deferred cross-thread drops. That is
unsound.
Require Send + Sync on the trait and its associated data so the GpuVm and
UniqueRefGpuVm handle impls need no per-impl bounds.
Fixes: 82b78182eacf ("rust: drm: add base GPUVM immediate mode abstraction")
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://patch.msgid.link/20260611-gpuvm-sync-send-v4-1-6c7f4ab2778a@google.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
|
|
When dma_buf_export() succeeds but dma_buf_fd() fails (e.g. -EMFILE from
fd exhaustion), the dmabuf is leaked with no dma_buf_put() called.
Reproducer: exhaust fd table near RLIMIT_NOFILE, then repeatedly call
IOMMU_TEST_OP_DMABUF_GET — htop shows unbounded memory growth.
Fix by calling dma_buf_put(dmabuf) on error and returning directly.
Fixes: d2041f1f11dd ("iommufd/selftest: Add some tests for the dmabuf flow")
Link: https://patch.msgid.link/r/20260707030635.221577-1-seven.yi.lee@gmail.com
Signed-off-by: yeeli <seven.yi.lee@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Pull nfsd fix from Chuck Lever:
- Fix a use-after-free when unlocking a filesystem
* tag 'nfsd-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: Prevent post-shutdown use-after-free in NFSD_CMD_UNLOCK_FILESYSTEM
|
|
Commit 53b7c271f06b ("smb: client: restrict implied bcc[0] exemption to
responses without data area") restricted the implied bcc[0] length
exception to responses without a data area. However, the overlap
handling in __smb2_calc_size() clears data_length, which can make an
invalid response appear to have no data area and so qualify for the
exception.
Track data area overlap separately and reject such responses before
applying the length compatibility exceptions.
Fixes: 53b7c271f06b ("smb: client: restrict implied bcc[0] exemption to responses without data area")
Cc: stable@vger.kernel.org
Signed-off-by: Shoichiro Miyamoto <shoichiro.miyamoto@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Before this change, xfstests generic/496 was not supported on ksmbd:
generic/496 ... [not run] fallocated swap not supported here
ksmbd handles SetEOF as truncate, so EOF extension alone does not
allocate backing blocks. A fallocated swapfile can therefore still
look sparse to swapon.
Request allocation for EOF-extending fallocate ranges that can be
represented by FILE_ALLOCATION_INFORMATION, and refresh the allocation
state afterwards.
With this change, xfstests generic/496 and generic/701 pass on ksmbd.
However, Samba "strict allocate = no" now exposes the real generic/701
failure: the old pass came from inflated local i_blocks, not from
server allocation. generic/213 also fails in that case because an
oversized allocation request may not return ENOSPC.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When a mode 0 fallocate extends EOF from 1G to 2G + 1M, the client
currently sends SetEOF for 2G + 1M. This can make fallocate return
success without allocating the requested range, or allocate extra
space before that range.
For example, on a fresh file:
xfs_io -f \
-c "falloc 0 1G" \
-c "falloc 2G 1M" \
-c "truncate 3G" test
The second fallocate should allocate [2G, 2G + 1M), leaving [1G, 2G)
as a hole.
Before this change, the result depended on the server allocation policy.
With Samba "strict allocate = no", SetEOF could return success without
allocating [2G, 2G + 1M). With "strict allocate = yes":
# filefrag -v test
[0, 1G) allocated
[1G, 2G) allocated unexpectedly
[2G, 2G + 1M) allocated
SMB cannot allocate that arbitrary range, so write zeroes to small
EOF-extending ranges instead. Limit this to 1 MiB to bound the
client-side I/O cost.
With "strict allocate = no", the requested range [2G, 2G + 1M) is
allocated by the writes. With "strict allocate = yes":
# filefrag -v test
[0, 1G) allocated
[1G, 2G) hole
[2G, 2G + 1M) allocated
This fixes the small EOF-extending range case exercised by generic/213.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The fallocate emulation allocates a 1 MiB zero-filled buffer even
though each SMB2_write request is limited to SMB2_MAX_BUFFER_SIZE,
which is 64 KiB. A high-order 1 MiB allocation is more likely to
fail on a fragmented system.
Allocate only the smaller of the requested range and SMB2_MAX_BUFFER_SIZE,
and reuse that zero-filled buffer for every write request. Also reject
a successful write that makes no progress to avoid looping indefinitely.
This reduces the contiguous allocation required by fallocate emulation
without changing the written data or range semantics.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
smb3_simple_fallocate_range() can skip holes when an allocated range
returned by the server starts before the current fallocate offset. The
skipped hole is not zero-filled, but fallocate still returns success. A
later write to that hole may therefore fail with ENOSPC.
The function queries allocated ranges so that it can preserve existing
contents and write zeroes only into holes. However, the server may return
a range that starts before the current fallocate offset.
For example, assume the fallocate request is [100, 400) and the only
allocated range returned by the server is [0, 200):
Request: [100, 400)
Server range: [ 0, 200) allocated
Correct:
[100, 200) allocated data, skip
[200, 400) hole, zero-fill
Current:
[100, 300) skipped
[300, 400) zero-filled afterwards
The current code adds the full server range length, 200, to the current
offset 100 and moves to 300. As a result, the hole in [200, 300) is
skipped without being zero-filled.
Fix this by advancing only over the part of the allocated range that
overlaps the current fallocate offset. Ignore ranges that end before the
current offset and reject ranges whose end offset overflows.
This also prevents a malformed range length from causing an out-of-bounds
zero-buffer read.
Fixes: 966a3cb7c7db ("cifs: improve fallocate emulation")
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
FSCTL_DUPLICATE_EXTENTS_TO_FILE changes the target file extents on the
server, but the client does not refresh the target AllocationSize/i_blocks.
Callers can observe or use the wrong st_blocks value immediately after the
clone, before a later attribute revalidation corrects it.
For example, create a reflinked file with a leading hole:
xfs_io -f -c "pwrite -S 0x61 0 64k" src
touch dst
chmod 600 dst
xfs_io -c "reflink src 0 1m 64k" dst
mkswap dst
swapon dst
The file still has a hole after mkswap:
/mnt/scratch/dst:
[0..7]: allocated
[8..2047]: hole
[2048..2175]: allocated
The server also reports only the allocated ranges:
server dst size=1114112 blocks=144
but the client reported EOF-derived blocks:
client dst size=1114112 blocks=2176
and swapon succeeded:
swapon_result=success
/mnt/scratch/dst 1.1M 0B -1
So EOF-derived i_blocks can let a sparse reflinked file pass the CIFS
swapfile hole check.
Fix this by querying FILE_ALL_INFORMATION on the target handle after a
successful duplicate extents request. Update i_blocks from AllocationSize
and keep the refreshed target inode attributes valid so a following stat
does not immediately revalidate again.
If the query fails, mark the cached inode attributes stale so a later
getattr can refresh them.
This also fixes the xfstests generic/370 regression introduced by the
i_blocks accounting change, as tested on a Samba "vfs objects = btrfs"
share.
Fixes: 99cd0a6eeb6c ("smb/client: do not account EOF extension as allocation")
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Currently in smb3_simple_fallocate_range(), a 1 MB buffer is allocated
using kzalloc(). Under heavy memory fragmentation, a contiguous 1 MB block
of physical memory (an order-8 allocation) may not be available,
causing the allocation to fail.
This failure was observed during xfstests generic/013 on a 4GB RAM
test machine running fsstress:
fsstress: page allocation failure: order:8,
mode:0x40dc0(GFP_KERNEL|__GFP_ZERO|__GFP_COMP),
nodemask=(null),cpuset=/,mems_allowed=0
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
warn_alloc+0x163/0x190
__alloc_pages_slowpath.constprop.0+0x71b/0x12f0
__alloc_frozen_pages_noprof+0x2f6/0x340
alloc_pages_mpol+0xb6/0x170
___kmalloc_large_node+0xb3/0xd0
__kmalloc_large_noprof+0x1e/0xc0
smb3_simple_falloc.isra.0+0x62b/0x960
cifs_fallocate+0xed/0x180
vfs_fallocate+0x165/0x3c0
__x64_sys_fallocate+0x48/0xa0
do_syscall_64+0xe1/0x640
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
Node 0 Normal: 3375*4kB ... 7*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB
Since this scratch buffer does not require physically contiguous memory,
switch the allocation to kvzalloc(). This retains the performance
benefits of kmalloc() under normal conditions, while gracefully falling
back to virtually contiguous memory when physical allocation fails.
Fixes: 966a3cb7c7db ("cifs: improve fallocate emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Fredric Cover <fredric.cover.lkernel@gmail.com>
Tested-by: Fredric Cover <fredric.cover.lkernel@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
Bard Liao
Nicolás Antinori
Reinette Chatre
Liang Luo
Thomas Weißschuh
Yunhui Cui
bui duc phuc
Rui Qi
Vivian Wang
Peiyang He
Esben Haabendal
Mark Brown
Chancel Liu
Ryosuke Yasuoka
Borislav Petkov (AMD)
Alexander Feilke
Markus Niebel
Alexander Stein
Martin Schmiedel
Dave Hansen
Hans Verkuil
Younes Akhouayri
Jason Macnak
Griffin Kroah-Hartman
Krzysztof Kozlowski
Sami Tolvanen
yeeli
Linus Torvalds
Shoichiro Miyamoto
Huiwen He
Fredric Cover