| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Several parts of network stack rely on iph->ihl validation
done by network stack before PRE_ROUTING.
Disable this feature for user namespaces for now.
tcp option handling is likely safe even for LOCAL_IN, so this
this leaves tcp option mangling via nft_exthdr.c as-is.
I don't think these are the only means to alter packets, but these
appear to be relatively prominent.
This could be relaxed later. Example:
- allow userns for ingress hook.
- allow userns if base is transport header.
Also, we should revalidate or restrict generally:
- Don't allow linklayer writes to spill into network header
- restrict ipv4 and ipv6 to 'known safe' writes, e.g.
saddr/daddr/check/tos
Reported-by: Qi Tang <tpluszz77@gmail.com>
Reported-by: Tong Liu <lyutoon@gmail.com>
Tested-by: Qi Tang <tpluszz77@gmail.com>
Link: https://lore.kernel.org/netfilter-devel/20260515100411.3141-1-fw@strlen.de/
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
With PREEMPT_RCU we get splat:
BUG: using smp_processor_id() in preemptible [..]
caller is cpu_mt+0x53/0xd0 net/netfilter/xt_cpu.c:37
CPU: 1 .. Comm: syz.3.1377 #0 PREEMPT(full)
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
check_preemption_disabled+0xd3/0xe0 lib/smp_processor_id.c:47
cpu_mt+0x53/0xd0 net/netfilter/xt_cpu.c:37
[..]
Just use raw version instead.
This is similar to 14d14a5d2957 ("netfilter: nft_meta: use raw_smp_processor_id()").
Fixes: 0ca743a55991 ("netfilter: nf_tables: add compatibility layer for x_tables")
Reported-by: syzbot+690d3e3ffa7335ac10eb@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Quoting reporter:
A race between GRE keymap insertion and destruction can corrupt the
kernel list or use a freed object. `nf_ct_gre_keymap_add()` publishes a
new keymap pointer before the embedded `list_head` is linked, while
`nf_ct_gre_keymap_destroy()` can concurrently delete and free that
same object. An unprivileged user can reach this through the PPTP
conntrack helper by racing PPTP control messages or helper teardown,
leading to KASAN-detectable list corruption/UAF in kernel context.
## Root Cause Analysis
`exp_gre()` installs GRE expectations for a PPTP control flow and then
adds two GRE keymap entries [..]
The add path publishes `ct_pptp_info->keymap[dir]` before linking the
embedded list node [..]
Concurrent teardown deletes that partially initialized object.
Make add/destroy symmetric: install both, destroy both while under lock.
Furthermore, we should refuse to publish a new mapping in case ct is going
away, else we may leak the allocation.
The "retrans" detection is strange: existing mapping is checked for key
equality with the new mapping, then for "is on the list" via list walk.
But I can't see how an existing keymap entry can be NOT on list.
Change this to only check if we're asked to map same tuple again -- if so,
skip re-install, else signal failure.
Last, add a bug trap for the keymap list; it has to be empty when namespace
is going away.
Reported-by: Leo Lin <leo@depthfirst.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
synproxy_tstamp_adjust() rewrites the TCP timestamp option in place
and then patches the TCP checksum via inet_proto_csum_replace4() on
the caller-supplied tcphdr pointer. Both ipv4_synproxy_hook() and
ipv6_synproxy_hook() obtain that pointer with skb_header_pointer()
before calling in, so it may either alias skb->head directly or
point at the caller's on-stack _tcph buffer.
Between obtaining the pointer and using it, the function calls
skb_ensure_writable(skb, optend), which on a cloned or non-linear
skb invokes pskb_expand_head() and frees the old skb->head. After
that point the cached th is stale:
caller (ipv[46]_synproxy_hook)
th = skb_header_pointer(skb, ..., &_tcph)
synproxy_tstamp_adjust(skb, protoff, th, ...)
skb_ensure_writable(skb, optend)
pskb_expand_head() /* kfree(old skb->head) */
...
inet_proto_csum_replace4(&th->check, ...)
/* writes into freed head, or
into the caller's stack copy
leaving the on-wire checksum
stale */
The option bytes are written through skb->data and are fine; only
the checksum update goes through th and so lands in the wrong
place. The result is either a write into freed slab memory or a
packet leaving with a checksum that does not match its payload.
Fix by re-deriving th from skb->data + protoff immediately after
skb_ensure_writable() succeeds, so the subsequent checksum update
targets the linear, writable header.
Fixes: 48b1de4c110a ("netfilter: add SYNPROXY core/target")
Assisted-by: kres (claude-opus-4-7)
Signed-off-by: Chris Mason <clm@meta.com>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
An unintended behavior in the TCP conntrack state machine allows a
connection to be forced into the CLOSE state using an RST packet with an
invalid sequence number.
Specifically, after a SYN packet is observed, an RST with an invalid SEQ
can transition the conntrack entry to TCP_CONNTRACK_CLOSE, regardless of
whether the RST corresponds to the expected reply direction. The relevant
code path assumes the RST is a response to an outgoing SYN, but does not
validate packet direction or ensure that a matching SYN was actually sent
in the opposite direction.
As a result, a crafted packet sequence consisting of a SYN followed by an
invalid-sequence RST can prematurely terminate an active NAT entry. This
makes connection teardown easier than intended.
So, tighten the state transition logic to ensure that RST-triggered
CLOSE transitions only occur when the RST is a valid response to a
previously observed SYN in the correct direction.
Cc: stable@vger.kernel.org
Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.")
Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
If a firmware node is allocated on the stack (for instance: temporary
software node whose life-time we control) or on the heap - but using a
non-zeroing allocation function - and initialized using fwnode_init(),
its secondary pointer will contain uninitalized memory which likely will
be neither NULL nor IS_ERR() and so may end up being dereferenced (for
example: in dev_to_swnode()). Set fwnode->secondary to NULL on
initialization.
Cc: stable <stable@kernel.org>
Fixes: 01bb86b380a3 ("driver core: Add fwnode_init()")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://patch.msgid.link/20260506115701.23035-1-bartosz.golaszewski@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When huge_pmd_unshare() is called to unshare a PMD table, the
tlb_unshare_pmd_ptdesc() function sets tlb->unshared_tables=true
but the aarch64 tlb_flush() only checked tlb->freed_tables to
determine whether to use TLBF_NONE (vae1is, invalidates walk
cache) or TLBF_NOWALKCACHE (vale1is, leaf-only).
This caused the stale PMD page table entry to remain in the walk cache
after unshare, potentially leading to incorrect page table walks.
Fix by including unshared_tables in the check, so that when
unsharing tables, TLBF_NONE is used and the walk cache is properly
invalidated.
Here is the detailed distinction between vae1is and vale1is:
| Instruction Combination | Actual Invalidation Scope |
| ------------------------ | --------------------------------------------------|
| `VAE1IS` + TTL=`0` | All entries at all levels (full invalidation) |
| `VAE1IS` + TTL=`2` (L2) | Non-leaf at Level 0/1 + leaf at Level 2 |
| `VALE1IS` + TTL=`0` | Leaf entries at all levels (non-leaf not cleared) |
| `VALE1IS` + TTL=`2` (L2) | Leaf entry at Level 2 only |
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Fixes: 8ce720d5bd91 ("mm/hugetlb: fix excessive IPI broadcasts when unsharing PMD tables using mmu_gather")
Cc: <stable@vger.kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In case of memory pressure, it's possible that a guest page gets freed
and then almost immediately reused by the guest. If CMMA is enabled,
_essa_clear_cbrl() will discard all pages that are either unused or
zero. If a discarded page is reused before _essa_clear_cbrl() is called,
and the pgste.zero bit is not cleared, the page will be discarded
despite not being unused.
When calling _gmap_ptep_xchg(), always clear the pgste.zero bit. This
prevents the page from being accidentally discarded when not unused.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Fixes: a2c17f9270cc ("KVM: s390: New gmap code")
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
The address passed to the gmap rmap was not being masked. As a
consequence several different (but functionally equivalent) rmap
entries were being created for each shadowed table.
Fix this by properly masking the address depending on the table level.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Fixes: a2c17f9270cc ("KVM: s390: New gmap code")
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
In some cases (i.e. under extreme memory pressure on the host),
attempting to shadow memory will result in the same memory being
unshadowed, causing a loop.
Add a PGSTE bit to distinguish between shadowed memory and shadowed DAT
tables, fix the unshadowing logic in _gmap_ptep_xchg() to prevent
unnecessary unshadowing and perform better checks.
Also fix the unshadowing logic in _gmap_crstep_xchg_atomic() which did
not unshadow properly when the large page would become unprotected.
Opportunistically add a check in gmap_protect_rmap() to make sure it
won't be called with level == TABLE_TYPE_PAGE_TABLE.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Fixes: a2c17f9270cc ("KVM: s390: New gmap code")
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
Fix a memory leak that can happen if gmap_ucas_map_one() or
kvm_s390_mmu_cache_topup() return error values.
Also fix a similar issue in gmap_set_limit().
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Fixes: a2c17f9270cc ("KVM: s390: New gmap code")
Reported-by: Jiaxin Fan <jiaxin.fan@ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
When performing a partial unshadowing, the rmap was being leaked.
Add the missing kfree().
Fixes: a2c17f9270cc ("KVM: s390: New gmap code")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
The ESP out-of-place fast path appends the trailer in esp_output_head()
before esp_output_tail() allocates the destination page frag. The
head-side gate currently checks skb->data_len and tailen separately, but
the tail code allocates a single destination frag from the combined
post-trailer skb->data_len.
Reject the page-frag fast path when the combined aligned length exceeds a
page. Otherwise skb_page_frag_refill() may fall back to a single page while
the destination sg still spans the combined skb->data_len.
Restore this combined-length page gate for both IPv4 and IPv6.
Fixes: 5bd8baab087d ("esp: limit skb_page_frag_refill use to a single page")
Cc: stable@vger.kernel.org
Signed-off-by: Lin Ma <malin89@huawei.com>
Signed-off-by: Chenyuan Mi <michenyuan@huawei.com>
Signed-off-by: Jingguo Tan <tanjingguo@huawei.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
In esp_output_tail(), when esp->inplace is false, the old skb page frags
are replaced with a new page from the xfrm page_frag cache. The source
scatterlist (sg) is built from the old frags before the replacement, and
esp_ssg_unref() is responsible for releasing the old page references
after the crypto operation completes.
However, if the second skb_to_sgvec() call (which builds the destination
scatterlist from the new page) fails, the code jumps to error_free which
only calls kfree(tmp). The old page frag references captured in the
source scatterlist are never released:
1. sg[] is built from old frags via skb_to_sgvec() (no extra get_page)
2. nr_frags is set to 1 and frag[0] is replaced with the new page
3. Second skb_to_sgvec() fails -> goto error_free
4. kfree(tmp) frees the sg[] memory but old frags are not unref'd
5. kfree_skb() only releases frag[0] (the new page), not the old ones
Fix this by adding a bool parameter to esp_ssg_unref() that, when true,
unconditionally unrefs the source scatterlist frags without checking
req->src and req->dst, since those fields are not yet initialized by
aead_request_set_crypt() at the point of the error. Existing callers
pass false to preserve the original behavior.
The same issue exists in both esp4 and esp6 as the code is identical.
Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible")
Signed-off-by: Alessandro Schino <7991aleschino@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Some variables relative with paravirt feature are declared in the header
file asm/qspinlock.h, however this file can be included only when option
CONFIG_SMP is on. There is compiling warnings if CONFIG_SMP is off since
variables are not declared.
Move these variable declarations to header file asm/paravirt.h to avoid
compiling warnings.
Fixes: c43dce6f13fb ("LoongArch: KVM: Make vcpu_is_preempted() as a macro rather than function")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202605061313.O8Hswm2b-lkp@intel.com/
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
KPROBE_HIT_SS and KPROBE_REENTER are two types of fatal recursions that
can not be safely recovered in kprobes.
KPROBE_HIT_SS means that a kprobe is hit during single-stepping. At
this point, the architecture-specific single-step context is already
active. Nested single-stepping would corrupt the state, as the kprobe
control block (kcb) and hardware registers cannot safely store multiple
levels of stepping state.
KPROBE_REENTER means that a third-level recursion occurs when a probe
is hit while the system is already handling a nested probe (second-
level). The kcb only provides a single slot (prev_kprobe) to backup the
state. When a third probe is hit, there is no more space to save the
state without corrupting the first-level backup.
Kprobes work by replacing instructions with breakpoints. In order to
execute the original instruction and continue, it must be moved to a
temporary "single-step" slot. Since there is no backup space left to
set up this slot safely, the CPU would be forced to return to the same
original breakpoint address, triggering an endless loop.
Currently, the code only prints a warning and returns. This leads to
an infinite re-entry loop as the CPU repeatedly hits the same trap and
a "stuck" CPU core because preemption was disabled at the start of the
handler and never re-enabled in this early return path.
Fix the logic by:
1. Merging KPROBE_HIT_SS and KPROBE_REENTER cases, as both represent
fatal recursions that cannot be safely recovered.
2. Replacing WARN_ON_ONCE() with BUG() to terminate the system. This
aligns LoongArch with other architectures (x86, arm64, riscv) and
prevents stack overflow while providing diagnostic information.
Fixes: 6d4cc40fb5f5 ("LoongArch: Add kprobes support")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
On SMP systems, kprobe handlers would occasionally fail to execute on
certain CPU cores. The issue is hard to reproduce and typically occurs
randomly under high system load.
The root cause is a software-side instruction hazard. According to the
LoongArch Reference Manual, while the cache coherency is maintained by
hardware, software must explicitly use the "IBAR" instruction to ensure
the instruction fetch unit (IFU) observes the effects of recent stores.
The current arch_arm_kprobe() and arch_disarm_kprobe() only execute the
"IBAR" barrier (via flush_insn_slot -> local_flush_icache_range) on the
local CPU. This leaves a vulnerable window where remote CPU cores may
continue executing stale instructions from their pipelines or prefetch
buffers, as they have not executed an "IBAR" since the code modification.
Switch to larch_insn_text_copy() to fix this:
1. Synchronization: It uses stop_machine_cpuslocked() to synchronize all
online CPUs, ensuring no CPU is executing the target code area during
modification.
2. Visibility: By passing cpu_online_mask to stop_machine_cpuslocked(),
the callback text_copy_cb() is executed on all online cores. Each CPU
core invokes local_flush_icache_range() to execute "IBAR", clearing
instruction hazards system-wide and ensuring the "break" instruction
is visible to the fetch units of all cores.
3. Robustness: It properly manages memory write permissions (ROX/RW) for
the kernel text segment during patching, ensuring compatibility with
CONFIG_STRICT_KERNEL_RWX.
Cc: <stable@vger.kernel.org> # 6.18+
Fixes: 6d4cc40fb5f5 ("LoongArch: Add kprobes support")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
ASoC: Fixes for v7.1
A bigger batch of fixes than usual due to -next not happeing last week,
this is mostly stuff for laptops - a lot of quirks and small fixes,
mainly for x86 and SoundWire. Nothing too big or exciting individually,
just two week's worth.
|
|
This reverts commit db359fccf212 ("mm: introduce a new page type for page
pool in page type") and a part of 735a309b4bfb9e ("net: add net_iov_init()
and use it to initialize ->page_type").
Netpp page_type'ed pages might be used in mapping so as to use @_mapcount.
However, since @page_type and @_mapcount are union'ed in struct page,
these two can't be used at the same time. Revert the commit introducing
page_type for Netpp for now.
The patch will be retried once @page_type and @_mapcount get allowed to be
used at the same time.
The revert also includes removal of @page_type initialization part
introduced by commit 735a309b4bfb9e ("net: add net_iov_init() and use it
to initialize ->page_type"), which will be restored on the retry.
Link: https://lore.kernel.org/20260515034701.17027-1-byungchul@sk.com
Fixes: db359fccf212 ("mm: introduce a new page type for page pool in page type")
Signed-off-by: Byungchul Park <byungchul@sk.com>
Reported-by: Dragos Tatulea <dtatulea@nvidia.com>
Closes: https://lore.kernel.org/all/982b9bc1-0a0a-4fc5-8e3a-3672db2b29a1@nvidia.com
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Acked-by: Harry Yoo (Oracle) <harry@kernel.org>
Reviewed-by: Lorenzo Stoakes <ljs@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Mark Bloch <mbloch@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: Saeed Mahameed <saeedm@nvidia.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Stanislav Fomichev <sdf@fomichev.me>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tariq Toukan <tariqt@nvidia.com>
Cc: Toke Hoiland-Jorgensen <toke@redhat.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
__get_vm_area_node() currently triggers a BUG() if in_interrupt() returns
true. However, in_interrupt() also reports true when BH are disabled.
The bridge code can call rhashtable_lookup_insert_fast() with bottom
halves disabled:
__vlan_add()
-> br_fdb_add_local()
spin_lock_bh(&br->hash_lock); <-- Disable BH
-> fdb_add_local()
-> fdb_create()
-> rhashtable_lookup_insert_fast()
-> kvmalloc()
-> vmalloc()
-> __get_vm_area_node()
-> BUG_ON(in_interrupt())
spin_unlock_bh(&br->hash_lock)
this triggers the BUG() despite the caller not being in NMI or
hard IRQ context.
Replace the in_interrupt() check with in_nmi() || in_hardirq().
Link: https://lore.kernel.org/20260515153009.2296191-1-urezki@gmail.com
Fixes: c6307674ed82 ("mm: kvmalloc: add non-blocking support for vmalloc")
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Ido Schimmel <idosch@nvidia.com>
Reported-by: syzbot+8b12fc6e0fb139765b58@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/69ff8c7c.050a0220.1036b8.000b.GAE@google.com/
Reviewed-by: Baoquan He <baoquan.he@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Replace old bouncing emails with ehristev@kernel.org
Link: https://lore.kernel.org/20260425-eh-mailmap-v1-1-58788d401eef@kernel.org
Signed-off-by: Eugen Hristev <ehristev@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When migrate_vma_insert_huge_pmd_page() jumps to unlock_abort due
to a PMD check failure, the pgtable allocated earlier via
pte_alloc_one() is never freed, causing a memory leak.
Added free_abort label to release the pgtable in error path.
Link: https://lore.kernel.org/20260501115122.23288-1-nueralspacetech@gmail.com
Fixes: a30b48bf1b24 ("mm/migrate_device: implement THP migration of zone device pages")
Signed-off-by: Sunny Patel <nueralspacetech@gmail.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Huang Ying <ying.huang@linux.alibaba.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Balbir Singh <balbirs@nvidia.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When a child process exits, it sends exit_signal to its parent via
do_notify_parent(). The clone() syscall constructs exit_signal as:
(lower_32_bits(clone_flags) & CSIGNAL)
CSIGNAL is 0xff, so values in the range 65-255 are possible. However,
valid_signal() only accepts signals up to _NSIG (64 on x86_64). A
non-zero non-valid exit_signal acts the same as exit_signal == 0: the
parent process is not signaled when the child terminates.
The syzkaller reproducer triggers this by calling clone() with flags=0x80,
resulting in exit_signal = (0x80 & CSIGNAL) = 128, which exceeds _NSIG and
is not a valid signal.
The v1 of this patch added the check only in the clone() syscall handler,
which is incomplete. kernel_clone() has other callers such as
sys_ia32_clone() which would remain unprotected. Move the check to
kernel_clone() to cover all callers.
Since the valid_signal() check is now in kernel_clone() and covers all
callers including clone3(), the same check in copy_clone_args_from_user()
becomes redundant and is removed. The higher 32bits check for clone3() is
kept as it is clone3() specific.
Note that this is a user-visible change: previously, passing an invalid
exit_signal to clone() was silently accepted. The man page for clone()
does not document any defined behavior for invalid exit_signal values, so
rejecting them with -EINVAL is the correct behavior. It is unlikely that
any sane application relies on passing an invalid exit_signal.
[oleg@redhat.com: the comment above kernel_clone() should be updated]
Link: https://lore.kernel.org/abwvgU17W8wuW2-J@redhat.com
Link: https://lore.kernel.org/20260316151956.563558-1-kartikey406@gmail.com
Fixes: 3f2c788a1314 ("fork: prevent accidental access to clone3 features")
Signed-off-by: Deepanshu Kartikey <Kartikey406@gmail.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: syzbot+bbe6b99feefc3a0842de@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=bbe6b99feefc3a0842de
Tested-by: syzbot+bbe6b99feefc3a0842de@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/20260307064202.353405-1-kartikey406@gmail.com/T/ [v1]
Link: https://lore.kernel.org/all/20260316104536.558108-1-kartikey406@gmail.com/T/ [v2]
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Ben Segall <bsegall@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Liam Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
flush_nmi_stats() drains per-node NMI slab atomics into the per-node
lruvec_stats, but does not propagate them to the memcg-level vmstats.
For non NMI case, account_slab_nmi_safe() calls mod_memcg_lruvec_state()
which updates both per-node lruvec_stats and memcg-level vmstats, so
flush_nmi_stats() needs to flush to per-node lruvec_stats as well as
memcg-level vmstats.
So fix this by flushing to the memcg-level vmstats for NMI too.
Link: https://lore.kernel.org/20260518082830.599102-1-alex@ghiti.fr
Fixes: 940b01fc8dc1 ("memcg: nmi safe memcg stats for specific archs")
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Harry Yoo (Oracle) <harry@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMON sysfs maintains the DAMOS tried region directory objects via a
linked list. When the user requests refresh of the directories, DAMON
sysfs removes all the region directories first, and then generate updated
regions directory on the empty space. The removal function
(damon_sysfs_scheme_regions_rm_dirs()) only puts the kobj objects.
Deletion of the container region object from the linked list is done
inside the kobj release callback function.
If somehow the callback invocation is delayed, the list will contain
regions list that gonna be freed. If the updated region directories
creation is started in this situation, the list can be corrupted and
use-after-free can happen.
Because the kobj objects are managed by only DAMON sysfs, the issue cannot
happen in normal situation. But, such delays can be made on kernels that
built with CONFIG_DEBUG_KOBJECT_RELEASE. On the kernel, the issue can
indeed be reproduced like below.
# damo start --damos_action stat
# cd /sys/kernel/mm/damon/admin/kdamonds/0/
# for i in {1..10}; do echo update_schemes_tried_regions > state; done
# dmesg | grep underflow
[ 89.296152] refcount_t: underflow; use-after-free.
Fix the issue by removing the region object from the list when
decrementing the reference count.
Also update damos_sysfs_populate_region_dir() to add the region object to
the list only after the kobject_init_and_add() is success, so that fail of
kobject_init_and_add() is not leaving the deallocated object on the list.
The issue was discovered [1] by Sashiko.
Link: https://lore.kernel.org/20260518152559.93038-1-sj@kernel.org
Link: https://lore.kernel.org/20260513011920.119183-1-sj@kernel.org [1]
Fixes: 9277d0367ba1 ("mm/damon/sysfs-schemes: implement scheme region directory")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 6.2.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Initialize nr_pages to 1 at the start of each loop iteration, like
folio_referenced_one() does.
Without this, nr_pages computed by a previous folio_unmap_pte_batch() call
can be reused on a later iteration that does not run
folio_unmap_pte_batch() again.
mmap a 64K large folio with MAP_ANONYMOUS | MAP_DROPPABLE, then call
madvise(MADV_FREE), then make the last page device-exclusive via
HMM_DMIRROR_EXCLUSIVE.
Trigger node reclaim through sysfs. Now, in try_to_unmap_one(), we will
first clear the first 15 out of 16 entries mapping the lazyfree folio.
This will set nr_pages to 15. In the next pvmw walk, this nr_pages gets
reused on a device-exclusive pte, thus potentially corrupting folio
refcount/mapcount.
At the moment, I have a userspace program which can make the kernel spit
out a trace, but the blow up is in folio_referenced_one(), because there
are existing bugs in the interaction between device-private and rmap
(which too I am investigating). I did a one liner kernel change to avoid
going into folio_referenced_one(), and the kernel blows up at
folio_remove_rmap_ptes in try_to_unmap_one which is what I wanted.
Note that the bug is there not since file folio batching but lazyfree
folio batching, since device-exclusive only works for anonymous folios.
Userspace visible effect is simply kernel crashing somewhere due to
refcount/mapcount corruption.
Link: https://lore.kernel.org/20260518063656.3721056-1-dev.jain@arm.com
Fixes: 354dffd29575 ("mm: support batched unmap for lazyfree large folios during reclamation")
Signed-off-by: Dev Jain <dev.jain@arm.com>
Acked-by: Barry Song <baohua@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes <ljs@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Harry Yoo <harry@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A crash was observed in zram_writeback_endio due to a NULL pointer
dereference in wake_up. The root cause is a race condition between the
bio completion handler (zram_writeback_endio) and the writeback task.
In zram_writeback_endio, wake_up() is called on &wb_ctl->done_wait after
releasing wb_ctl->done_lock. This creates a race window where the
writeback task can see num_inflight become 0, return, and free wb_ctl
before zram_writeback_endio calls wake_up().
CPU 0 (zram_writeback_endio) CPU 1 (writeback_store)
============================ ============================
zram_writeback_slots
zram_submit_wb_request
zram_submit_wb_request
wait_event(wb_ctl->done_wait)
spin_lock(&wb_ctl->done_lock);
list_add(&req->entry, &wb_ctl->done_reqs);
spin_unlock(&wb_ctl->done_lock);
wake_up(&wb_ctl->done_wait);
zram_complete_done_reqs
spin_lock(&wb_ctl->done_lock);
list_add(&req->entry, &wb_ctl->done_reqs);
spin_unlock(&wb_ctl->done_lock);
while (num_inflight) > 0)
spin_lock(&wb_ctl->done_lock);
list_del(&req->entry);
spin_unlock(&wb_ctl->done_lock);
// num_inflight becomes 0
atomic_dec(num_inflight);
// Leave zram_writeback_slots
// Free wb_ctl
release_wb_ctl(wb_ctl);
// UAF crash!
wake_up(&wb_ctl->done_wait);
This patch fixes this race by using RCU. By protecting wb_ctl with
rcu_read_lock() in zram_writeback_endio and using kfree_rcu() to free it,
we ensure that wb_ctl remains valid during the execution of
zram_writeback_endio.
Link: https://lore.kernel.org/20260512074918.2606208-1-richardycc@google.com
Fixes: f405066a1f0d ("zram: introduce writeback bio batching")
Signed-off-by: Richard Chang <richardycc@google.com>
Suggested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Suggested-by: Minchan Kim <minchan@kernel.org>
Acked-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Martin Liu <liumartin@google.com>
Cc: wang wei <a929244872@163.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When SEAL_EXEC is added, SEAL_WRITE is implied to make W^X. But the
implied seal is set after the check that makes sure the memfd can not have
any writable mappings. This means one can use SEAL_EXEC to apply
SEAL_WRITE while having writeable mappings.
This breaks the contract that SEAL_WRITE provides and can be used by an
attacker to pass a memfd that appears to be write sealed but can still be
modified arbitrarily.
Fix this by adding the implied seals before the call for
mapping_deny_writable() is done.
Link: https://lore.kernel.org/20260505133922.797635-1-pratyush@kernel.org
Fixes: c4f75bc8bd6b ("mm/memfd: add write seals when apply SEAL_EXEC to executable memfd")
Signed-off-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: Jeff Xu <jeffxu@google.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kees Cook <kees@kernel.org>
Cc: "David Hildenbrand (Arm)" <david@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The checkpoint/restore sysctl path can request the next SysV IPC id
through ids->next_id. ipc_idr_alloc() currently forwards that request to
idr_alloc() with an open-ended upper bound.
If the valid tail of the SysV IPC id space is full, the allocation can
spill beyond ipc_mni. The returned SysV IPC id still uses the normal
index encoding, so later lookup and removal can target the wrong slot.
This leaves the real IDR entry behind and breaks the IDR state for the
object.
The bug is in ipc_idr_alloc() in the checkpoint/restore path.
1. ids->next_id is passed to:
idr_alloc(&ids->ipcs_idr, new, ipcid_to_idx(next_id), 0, ...)
2. The zero upper bound makes the allocation effectively open-ended.
Once the valid SysV IPC tail is occupied, idr_alloc() can spill past
ipc_mni and allocate an entry beyond the valid IPC id range.
3. The new object id is still encoded with the narrower SysV IPC index
width:
new->id = (new->seq << ipcmni_seq_shift()) + idx
4. Later removal goes through ipc_rmid(), which uses:
ipcid_to_idx(ipcp->id)
That truncates the real IDR index. An object actually stored at a
high index can then be removed as if it lived at a low in-range
index.
5. For shared memory, shm_destroy() frees the current object anyway, but
the real high IDR slot is left behind as a dangling pointer.
6. A subsequent walk of /proc/sysvipc/shm reaches the stale IDR entry
and dereferences freed memory.
Prevent this by bounding the requested allocation to ipc_mni so the
checkpoint/restore path fails once the valid range is exhausted.
Link: https://lore.kernel.org/cover.1778336914.git.linpu5433@gmail.com
Link: https://lore.kernel.org/2eebe949bfa7d1f6e13b5be6a92c64c850ce9d45.1778336914.git.linpu5433@gmail.com
Fixes: 03f595668017 ("ipc: add sysctl to specify desired next object id")
Signed-off-by: Linpu Yu <linpu5433@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Cc: Kees Cook <kees@kernel.org>
Cc: Stanislav Kinsbursky <skinsbursky@parallels.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This reverts commit ea52cb24cd3f ("mm/hugetlbfs: update hugetlbfs to use
mmap_prepare") with conflict resolution to account for changes in commit
ea52cb24cd3f ("mm/hugetlbfs: update hugetlbfs to use mmap_prepare").
The patch incorrectly handled hugetlb VMA lock allocation at the
mmap_prepare stage, where a failed allocation occurring after mmap_prepare
is called might result in the lock leaking.
There is no risk of a merge causing a similar issues, as
VMA_DONTEXPAND_BIT is set for hugetlb mappings.
As a first step in addressing this issue, simply revert the change so we
can rework how we do this having corrected the underlying issues.
We maintain the VMA flags changes as best we can, accounting for the fact
that we were working with a VMA descriptor previously and propagating
like-for-like changes for this.
Note that we invoke vma_set_flags() and do not call vma_start_write() as
vm_flags_set() does. This is OK as it's being done in an .mmap hook where
the VMA is not yet linked into the tree so nobody else can be accessing
it.
Link: https://lore.kernel.org/20260512160643.266960-1-ljs@kernel.org
Fixes: ea52cb24cd3f ("mm/hugetlbfs: update hugetlbfs to use mmap_prepare")
Signed-off-by: Lorenzo Stoakes <ljs@kernel.org>
Reported-by: Mingyu Wang <25181214217@stu.xidian.edu.cn>
Closes: https://lore.kernel.org/linux-mm/20260425070700.562229-1-25181214217@stu.xidian.edu.cn/
Acked-by: Muchun Song <muchun.song@linux.dev>
Acked-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Pedro Falcato <pfalcato@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Update my email address from @ge.com to @gehealthcare.com after GE
HealthCare was spun-off from GE.
Link: https://lore.kernel.org/20260506063335.3-1-ian.ray@gehealthcare.com
Signed-off-by: Ian Ray <ian.ray@gehealthcare.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Both GCC [1] and Clang [2] consider the generic version of _THIS_IP_ to
be broken:
#define _THIS_IP_ ({ __label__ __here; __here: (unsigned long)&&__here; })
In particular, the address of a label is only expected to be used with a
computed goto.
While the generic version more or less works today, it is known to be
brittle and may break with current and future optimizations. For
example, Clang -O2 always returns 1 when this function is inlined:
static inline unsigned long get_ip(void)
{ return ({ __label__ __here; __here: (unsigned long)&&__here; }); }
Fix it by overriding _THIS_IP_ in <asm/linkage.h> (which is included by
<linux/instruction_pointer.h>) using an architecture-specific inline asm
version. Additionally, avoiding taking the address of a label prevents
compilers from emitting spurious indirect branch targets (e.g. ENDBR or
BTI) under control-flow integrity schemes.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=120071 [1]
Link: https://github.com/llvm/llvm-project/issues/138272 [2]
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add Simon Schuster as a co-maintainer for the nios2 architecture and
mark it as supported.
Signed-off-by: Simon Schuster <schuster.simon@siemens-energy.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Reproducer:
1. server: systemctl start ksmbd
2. client: mount -t cifs //${server_ip}/export /mnt
3. client: C program: openat(AT_FDCWD, "/mnt", O_RDWR | O_TMPFILE, 0600)
Do not treat `FILE_DELETE_ON_CLOSE_LE` as delete pending while files
remain open.
This patch fixes xfstests generic/004.
Cc: stable@vger.kernel.org
Link: https://chenxiaosong.com/en/smb-xfstests-generic-004.html
Co-developed-by: Huiwen He <hehuiwen@kylinos.cn>
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Tested-by: Steve French <stfrench@microsoft.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Introduce smb_validate_ntsd_sid() helper to safely validate Owner SID
and Group SID inside the NT Security Descriptor (smb_ntsd) retrieved
from the parent directory.
Cc: stable@vger.kernel.org
Signed-off-by: Junyi Liu <moss80199@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
After a durable reconnect succeeds, ksmbd_reopen_durable_fd() republishes
the same ksmbd_file into the session volatile-id table. If smb2_open()
then takes a later error path, cleanup first calls ksmbd_fd_put(work, fp)
and then unconditionally calls ksmbd_put_durable_fd(dh_info.fp).
In this case fp and dh_info.fp are the same object. The first put drops the
reconnect lookup reference, but the final durable put can run
__ksmbd_close_fd(NULL, fp). Because the final close is not session-aware,
it can free the file object without removing the volatile-id entry that was
just published into the session table.
Use the session-aware put for the final reconnect drop when the reconnect
had already succeeded and the error path is cleaning up the republished
file. Earlier reconnect failures, before fp is assigned to dh_info.fp, keep
using the durable-only put path.
Fixes: 1baff47b81f9 ("ksmbd: fix use-after-free in smb2_open during durable reconnect")
Signed-off-by: Junyi Liu <moss80199@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Mediatek DRM Fixes - 20260521
1. fix sparse warnings
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patch.msgid.link/20260521135649.4681-1-chunkuang.hu@kernel.org
|
|
Pull PCI fixes from Bjorn Helgaas:
- Remove obsolete PCIe maintainer addresses (Florian Eckert, Hans
Zhang)
- Restore a brcmstb link speed assignment that was inadvertently
removed, reducing bcm2712 performance (Florian Fainelli)
* tag 'pci-v7.1-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: brcmstb: Assign pcie->gen from of_pci_get_max_link_speed()
MAINTAINERS: Remove Jianjun Wang as PCIe mediatek maintainer
MAINTAINERS: Remove Chuanhua Lei as PCIe intel-gw maintainer
|
|
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth, wireless and netfilter.
Craziness continues with no end in sight. Even discounting the driver
revert this is a pretty huge PR for standards of the previous era. I'd
speculate - we haven't seen the worst of it, yet. Good news, I guess,
is that so far we haven't seen many (any?) cases of "AI reported a
bug, we fixed it and a real user regressed".
Current release - fix to a fix:
- Bluetooth: btmtk: accept too short WMT FUNC_CTRL events
- vsock/virtio: relax the recently added memory limit a little
Current release - regressions:
- IB/IPoIB: make sure IB drivers always use async set_rx_mode since
some (mlx5) are now required to use it due to locking changes
Previous releases - regressions:
- udp: fix UDP length on last GSO_PARTIAL segment
- af_unix: fix UAF read of tail->len in unix_stream_data_wait()
- tcp: fix stale per-CPU tcp_tw_isn leak enabling ISN prediction
- mlx5e: fix unlocked writing to ICOSQ, breaking AF_XDP
Previous releases - always broken:
- tap: fix stack info leak in tap_ioctl() SIOCGIFHWADDR
- ipv4: raw: reject IP_HDRINCL packets with ihl < 5
- Bluetooth: a lot of locking and concurrency fixes (as always)
- batman-adv (mesh wireless networking): a lot of random fixes for
issues reported by security researchers and Sashiko
- netfilter: same thing, a lot of small security-ish fixes all over
the place, nothing really stands out
Misc:
- bring back the old 3c509 driver, Maciej wants to maintain it"
* tag 'net-7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (187 commits)
net: enetc: avoid VF->PF mailbox timeout during SR-IOV teardown
net: enetc: fix init and teardown order to prevent use of unsafe resources
net: enetc: fix unbounded loop and interrupt handling in VF-to-PF messaging
net: enetc: fix DMA write to freed memory in enetc_msg_free_mbx()
net: enetc: fix race condition in VF MAC address configuration
net: enetc: fix TOCTOU race and validate VF MAC address
net: enetc: add ratelimiting to VF mailbox error messages
net: enetc: fix missing error code when pf->vf_state allocation fails
net: enetc: fix incorrect mailbox message status returned to VFs
net: bridge: prevent too big nested attributes in br_fill_linkxstats()
l2tp: use list_del_rcu in l2tp_session_unhash
net: bcmgenet: keep RBUF EEE/PM disabled
ethernet: 3c509: Fix most coding style issues
ethernet: 3c509: Update documentation to match MAINTAINERS
ethernet: 3c509: Add GPL 2.0 SPDX license identifier
ethernet: 3c509: Fix AUI transceiver type selection
Revert "drivers: net: 3com: 3c509: Remove this driver"
tools: ynl: support listening on all nsids
net: gro: don't merge zcopy skbs
pds_core: ensure null-termination for firmware version strings
...
|
|
Pull ceph fix from Ilya Dryomov:
"A fix for an 'rbd unmap' race condition which popped up on a
production setup where many RBD devices are frequently mapped and
unmapped, marked for stable"
* tag 'ceph-for-7.1-rc5' of https://github.com/ceph/ceph-client:
rbd: eliminate a race in lock_dwork draining on unmap
|
|
The F_GETLK fcntl can work with either read access or write access or
both. It can query F_RDLCK and F_WRLCK locks in either case.
However lockd currently treats F_GETLK similar to F_SETLK in that read
access is required to query an F_RDLCK lock and write access is required
to query a F_WRLCK lock.
This is wrong and can cause problems - e.g. when qemu accesses a
read-only (e.g. iso) filesystem image over NFS (though why it queries
if it can get a write lock - I don't know. But it does, and this works
with local filesystems).
So we need TEST requests to be handled differently. To do this:
- change nlm_do_fopen() to accept O_RDWR as a mode and in that case
succeed if either a O_RDONLY or O_WRONLY file can be opened.
- change nlm_lookup_file() to accept a mode argument from caller,
instead of deducing base on lock time, and pass that on to nlm_do_fopen()
- change nlm4svc_retrieve_args() and nlmsvc_retrieve_args() to detect
TEST requests and pass O_RDWR as a mode to nlm_lookup_file, passing
the same mode as before for other requests. Also set
lock->fl.c.flc_file to whichever file is available for TEST requests.
- change nlmsvc_testlock() to also not calculate the mode, but to use
whatever was stored in lock->fl.c.flc_file.
This behaviour of lockd - requesting O_WRONLY access to TEST for
exclusive locks - has been present at least since git history began.
However it was hidden until recently because knfsd ignored the access
requested by lockd and required only READ access for all locking
requests (unless the underlying filesystem provided an f_op->open
function which checked access permissions).
The commit mentioned in Fixes: below changed nfsd_permission() to NOT
override the access request for LOCK requests and this exposed the bug
that we are now fixing.
Note that there is another issue that this patch does not address.
The flock(.., LOCK_EX) call is permitted on a read-only file descriptor.
Linux NFS maps this to NLM locking as whole-file byte-range locks.
nfsd will see this as though it were fcntl( F_SETLK (F_WRLCK)) and will
now require write access, which it might not be able to get.
It is not clear if this is a problem in practice, or what the best
solution might be. So no attempt is made to address it.
Reported-by: Tj <tj.iam.tj@proton.me>
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1128861
Fixes: 4cc9b9f2bf4d ("nfsd: refine and rename NFSD_MAY_LOCK")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The nfsd_ctl_fh_key_set tracepoint was introduced to capture
operator activity on the filehandle signing key. Earlier revisions
logged the key bytes verbatim; the version that landed hashes the
16 key bytes through crc32_le and stores the result.
CRC32 is a linear projection of its input rather than a one-way
function, and truncating any hash of fixed-size secret material
leaves the key recoverable under offline brute force when the
threat model includes an attacker with access to the trace ring.
The operational question the fingerprint was meant to answer is
whether a NFSD_CMD_THREADS_SET call that carries an
NFSD_A_SERVER_FH_KEY attribute actually replaced the active key or
re-installed the value already in place. Answer that question
directly: compare the incoming key bytes against the current
nn->fh_key inside nfsd_nl_fh_key_set() and surface a single bit to
the tracepoint. The event now prints "updated" when the stored
key changed and "unmodified" otherwise. A first set that fails
kmalloc reports "unmodified" because no key was installed.
Reported-by: jaeyeong <fin@spl.team>
Fixes: 62346217fd72 ("NFSD: Add a key for signing filehandles")
Cc: Benjamin Coddington <bcodding@hammerspace.com>
Reviewed-by: Benjamin Coddington <bcodding@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Commit 7b546bd89975 ("sunrpc/cache: improve RCU safety in
cache_list walking.") changed the tail of __cache_seq_start()
to unconditionally store
*pos = ((long long)hash << 32) + 1
before returning, dropping a prior "hash >= cd->hash_size"
guard. When the while loop exits because every remaining
bucket was empty, hash equals cd->hash_size, so the stored
*pos is one position past the table's last valid bucket.
seq_read_iter() caches that index in m->index. A subsequent
pread(2) at the same file offset skips traverse() and hands
the stored index back to __cache_seq_start(), which decodes
hash = cd->hash_size and dereferences
cd->hash_table[cd->hash_size] -- one hlist_head past the end
of the kzalloc'd table.
KASAN reports an eight-byte slab-out-of-bounds read at the
tail of the 2048-byte hash_table allocation for the NFSD
export cache (EXPORT_HASHMAX * sizeof(struct hlist_head) ==
256 * 8).
Reject an input hash that is out of range before touching the
hash table. cache_seq_next() already bounds-checks its own
loop; the start routine needs to be symmetric.
Reported-by: syzbot+60cfa08822470bbebe44@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=60cfa08822470bbebe44
Fixes: 7b546bd89975 ("sunrpc/cache: improve RCU safety in cache_list walking.")
Reviewed-by: Benjamin Coddington <bcodding@hammerspace.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Pull ring-buffer fixes from Steven Rostedt:
- Fix reporting MISSED EVENTS in trace iterator
When the "trace" file is read with tracing enabled, if the writer
were to pass the iterator reader, it resets, sets a "missed_events"
flag and continues. The tracing output checks for missed events and
if there are some, it prints out "[LOST EVENTS]" to let the user know
events were dropped.
But the clearing of the missed_events happened when the tracing
system queried the ring buffer iterator about missed events. This was
premature as the ring buffer is per CPU, and the tracing code reads
all the CPU buffers and checks for missed events when it is read. If
the CPU iterator that had missed events isn't printed next, the
output for the LOST EVENTS is lost.
Clear the missed_events flag when the iterator moves to the next
event and not when the missed_events flag is queried. Also clear it
on reset.
- Flush and stop the persistent ring buffer on panic
On panic the persistent ring buffer is used to debug what caused the
panic. But on some architectures, it requires flushing the memory
from cache, otherwise, the ring buffer persistent memory may not have
the last events and this could also cause the ring buffer to be
corrupted on the next boot.
- Fix nr_subbufs initialization in simple_ring_buffer_init_mm
The remote simple ring buffer meta data nr_subbufs is initialized too
early and gets cleared later on, making it zero and not reflect the
actual number of sub-buffers.
- Fix unload_page for simple_ring_buffer init rollback
On error, the pages loaded need to be unloaded. To unload a page it
is expected that: page = load_page(va); -> unload_page(page). But the
code was doing: unload_page(va) and not unload_page(page).
- Create output file from cmd_check_undefined
The check for undefined symbols checks if the file *.o.checked exists
and if so it skips doing the work. But the *.o.checked file never was
created making every build do the work even when it was already done
previously.
* tag 'trace-ringbuffer-v7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Create output file from cmd_check_undefined
tracing: Fix unload_page for simple_ring_buffer init rollback
tracing: Fix nr_subbufs initialization in simple_ring_buffer_init_mm()
ring-buffer: Flush and stop persistent ring buffer on panic
ring-buffer: Fix reporting of missed events in iterator
|
|
Short summary of fixes pull:
amdxdna:
- remove mmap and export for ubuf
bridge:
- chipone-icn6211: managed bridge cleanup
- lt66121: acquire reset GPIO
- megachips: fix clean up on failed IRQ requests
gem:
- clean up LRU locking
v3d:
- fix UAF in error code paths
- release GEM-object ref on free'd jobs
virtio:
- use uninterruptible resv locking in plane updates
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260521071456.GA14644@localhost.localdomain
|
|
Add the SpacemiT K3 QSPI compatible to the fsl-qspi binding.
K3 and K1 use the same QSPI controller, so document the K3 compatible
with "spacemit,k1-qspi" as fallback.
Signed-off-by: Cody Kang <cody.kang.hk@outlook.com>
Signed-off-by: Zhengyu He <hezhy472013@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260521-k3-pico-itx-qspi-v2-for-next-20260521-v2-1-52bce26e5fd8@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When submitting a bio to blk-mq, if the task should sleep after peeking
a cached request, but before it pops it, the plug flushes and calls
blk_mq_free_plug_rqs, freeing the cached_rqs. This creates a
use-after-free bug. Fix this by popping the cached request before any
possible blocking calls if it is suitable for use.
Popping this request first holds a queue reference, so avoid any
serialization races with queue freezes and can safely proceed with
dispatching that request to the driver. This potentially increases a
timing window from when a driver wants to freeze its queue to when
requests stop being dispatched. That scenario is off the fast path
though, and drivers need to appropriately handle requests during a
freeze request anyway.
The downside is the popped element needs to be individually freed when
we performed a bio plug merge. The cached request would have had to be
freed later anyway, but this patch does it inline with building the plug
list instead of after flushing it.
Fixes: b0077e269f6c1 ("blk-mq: make sure active queue usage is held for bio_integrity_prep()")
Fixes: 7b4f36cd22a65 ("block: ensure we hold a queue reference when using queue limits")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://patch.msgid.link/20260521190253.242065-1-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In the pcm512x chipset driver, pcm512x_overclock_xxx_put() is defined as
a general mixer kcontrol instead of a DAPM kcontrol, so struct
snd_soc_dapm_context must not be accessed via
snd_soc_dapm_kcontrol_to_dapm().
This causes a NULL pointer dereference, so it must be modified to use
snd_soc_component_to_dapm().
Cc: stable@kernel.org
Closes: https://github.com/raspberrypi/linux/issues/7242
Fixes: 02dbbb7e982a ("ASoC: codecs: pcm512x: convert to snd_soc_dapm_xxx()")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Link: https://patch.msgid.link/20260521113712.227438-1-aha310510@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For PTL onwards Cirrus are intending to rely on function topologies,
rather than using a match table for each system type. Remove this
unnecessary match table entry. Having the match entries can
mean that systems match when they should use function topologies
instead, resulting in incorrect audio configurations. Although,
admittedly this is not too likely with this 6x amp configuration
as those are quite rare, but best to follow best practice.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260520163631.3300102-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For PTL onwards Cirrus are intending to rely on function
topologies, rather than using a match table for each system
type. Chrome systems tend to have custom magic in the topology
and thus need to load a specific file. This causes problems as
these system can have the same layout as generic laptops causing
the match to apply to other laptops. Add a DMI quirk that forces
these matches to only apply to specific devices.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260520163631.3300102-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
Florian Westphal
Chris Mason
Hamza Mahfooz
Bartosz Golaszewski
Zeng Heng
Claudio Imbrenda
Jingguo Tan
e521588
Bibo Mao
Tiezhu Yang
Takashi Iwai
Byungchul Park
Uladzislau Rezki (Sony)
Eugen Hristev
Sunny Patel
Deepanshu Kartikey
Alexandre Ghiti
SeongJae Park
Dev Jain
Richard Chang
Pratyush Yadav (Google)
Linpu Yu
Lorenzo Stoakes
Ian Ray
Marco Elver
Simon Schuster
ChenXiaoSong
Junyi Liu
Dave Airlie
Linus Torvalds
NeilBrown
Chuck Lever
Zhengyu He
Keith Busch
Jeongjun Park
Charles Keepax