| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Inadvertently bool data type is used where int is supposed to
be used. This might turn a negative error code into true or
false and sign of the return code would be lost.
Fixes: 8f9bf857e43b ("net: ethernet: oa_tc6: implement internal PHY initialization")
Signed-off-by: Selvamani Rajagopal <Selvamani.Rajagopal@onsemi.com>
Link: https://patch.msgid.link/20260824-fix-race-condition-and-crash-v7-4-4323279b18f2@onsemi.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Previously, TX queue interface was stopped when
disable_traffic flag was set, which would indicate fatal
error. It is more appropriate to disable the queue as,
unless driver is unloaded and reloaded, there is no recovery
after disable_traffic is set.
Queues may be re-enabled inadvertently by other layers.
Intention of disable_traffic is only to stop the traffic
from flowing on fatal error.
Fixes: b542d13fab0f ("net: ethernet: oa_tc6: Interrupt is active low, level triggered.")
Signed-off-by: Selvamani Rajagopal <Selvamani.Rajagopal@onsemi.com>
Link: https://patch.msgid.link/20260824-fix-race-condition-and-crash-v7-3-4323279b18f2@onsemi.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When oversubscribed traffic causes lot of buffer overflow errors,
probably due to loss of data chunks, driver fails to find a
data chunk with end_valid bit set, before it runs out of sk buffer
space. As a result, assert is seen during skb_put.
Now, check is made if skb buffer has enough tailroom for the
incoming data before accepting. If there is no room, current
frame is abandoned and it will start looking for a data chunk
with start_valid bit, that is a new frame.
SK buffer allocation error is considered as recoverable error.
rx_buf_overflow flag is too specific and no longer the only
condition this flag is used for. Therefore it is renamed as
wait_until_start_valid. This is more appropriate as this flag
is used to look for the next data chunk with SV bit set, after
failures like buffer overflow, buffer allocation failure, skb pointer
validity besides buffer overflow error.
Not writing to status0 if it reads 0.
Fixes: d70a0d8f2f2d ("net: ethernet: oa_tc6: implement receive path to receive rx ethernet frames")
Signed-off-by: Selvamani Rajagopal <Selvamani.Rajagopal@onsemi.com>
Link: https://patch.msgid.link/20260824-fix-race-condition-and-crash-v7-2-4323279b18f2@onsemi.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Threaded IRQ uses waiting_tx_skb. Transmit path also uses this pointer
without any mutual exclusion protection. As a result, it might leak skb
buffer, particularly if threaded IRQ sets disable_traffic true after
start_xmit already checked and found that disable_traffic being false,
if they happen to run on different cores.
On fatal error, where disable_traffic is set, transmit function drops the
packet and return NETDEV_TX_OK. Due to this change, skb_linearize call
is moved up to the beginning of the transmit function.
Since skb buffer may be freed from different contexts, dev_kfree_skb_any
is used to free skb buffer now, replacing one of the kfree_skb call.
oa_tc6_exit disables the irq before setting disable_traffic true.
Fixes: b542d13fab0f ("net: ethernet: oa_tc6: Interrupt is active low, level triggered.")
Signed-off-by: Selvamani Rajagopal <Selvamani.Rajagopal@onsemi.com>
Link: https://patch.msgid.link/20260824-fix-race-condition-and-crash-v7-1-4323279b18f2@onsemi.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
iucv_sock_recvmsg() sends the HiperSockets-only AF_IUCV_FLAG_WIN without
testing the transport, so on a classic z/VM socket iucv_send_ctrl() sizes
the skb through a NULL iucv->hs_dev. SO_MSGLIMIT accepts 1, so msglimit / 2
is zero and one recvmsg() on its own socket is enough for an unprivileged
process to take a spurious disconnect.
It also calls iucv_send_ctrl() under spin_lock_bh(&message_q.lock), which
allocates GFP_KERNEL inside a section the code treats as atomic. Sending
outside that lock lets two recvmsg() reach afiucv_hs_send() at once, where
msg_recv is sampled for the advertised window and subtracted after
dev_queue_xmit() -- and sendmsg reaches that counter under lock_sock()
while recvmsg holds no socket lock, so both can subtract the same value,
the counter goes negative and the credit reaches the peer twice.
Test the transport, claim the credit with atomic_xchg() after the last
error exit and hand it back if the transmit fails, and send once the lock
is dropped.
Fixes: 3881ac441f64 ("af_iucv: add HiperSockets transport")
Fixes: 238965b71b96 ("net/af_iucv: build proper skbs for HiperTransport")
Cc: stable@vger.kernel.org
Tested-by: Aswin Karuvally <aswin@linux.ibm.com>
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://patch.msgid.link/20260828-b4-disp-33fac0ed-v3-1-e6d061880ee0@proton.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver has accepted tcs,tcs4526 since commit 5eee5eced95f
("regulator: fan53555: add tcs4526"), which added the compatible to both
the of_device_id and i2c_device_id tables for the TCS4526, a chip that
reports id 0 rather than the TCS4525's id 12.
The binding was converted to DT schema afterwards, in commit 6cea468b680e
("regulator: dt-bindings: Convert Fairchild FAN53555 to DT schema"), and
only picked up tcs,tcs4525. No in-tree DTS used the 4526 string at the
time, so nothing flagged the omission.
RK3399Pro boards use the TCS4526 for vdd_gpu and vdd_cpu_b, so a DTS
describing them fails dtbs_check today even though the driver binds
correctly.
Add the missing compatible.
Signed-off-by: Rudi Heitbaum <rudi@heitbaum.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/aousEdwMni9ScZBn@0d3a7a881997
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
drm_pagemap_evict_to_ram() may retry eviction, but mpages retains
the count from the previous attempt. A retry can therefore continue
to the copy path even when no RAM pages were populated.
Reset mpages at the retry label so it reflects only the current
attempt.
Fixes: 99624bdff867 ("drm/gpusvm: Add support for GPU Shared Virtual Memory")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Signed-off-by: Arvind Yadav <arvind.yadav@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260728090304.1264759-1-arvind.yadav@intel.com
|
|
A device-private folio migrated to system memory by a CPU fault can
remain reachable through the raw-PFN eviction path until migration
finalization drops the source reference.
If eviction selects the same device-private folio during this window,
it can attempt to migrate the folio again. The second migration can leave
an uncharged folio on an LRU list, causing folio_lruvec_lock_irqsave() to
retry indefinitely and resulting in a soft lockup and RCU stall.
Mark successfully migrated device-private folios using a low bit of
their zone_device_data before migration finalization. Make both CPU-fault
and raw-PFN migration paths skip device-private folios carrying this
flag.
Mask the flag when retrieving the drm_pagemap_zdd pointer and preserve
it when a device-private folio is split. Keeping the state on the physical
folio also avoids depending on a virtual address that may change before a
fault occurs.
v2:
- Replace the retired-PFN XArray with an embedded bitmap. (Matthew Brost)
- Mark every base page covered by a migrated folio so retirement remains
valid if the folio is later split.
v3:
- Store the migrated state in a low bit of zone_device_data instead of
adding virtual-range and bitmap tracking to the ZDD. (Matthew Brost)
- Mask the flag when retrieving the ZDD and preserve it when splitting
a folio.
- Drop the pre-existing fixes already covered by Matthew Brost's series:
https://patchwork.freedesktop.org/series/171651/
v4:
- Advance by the folio size only for migration entries marked with
MIGRATE_PFN_COMPOUND. (Sashiko)
v5:
- Simplify ZDD flag updates and folio iteration. (Matthew Brost)
- Skip retired device-private folios in the CPU-fault path. (Matthew Brost)
- Preserve flag bits while taking a new ZDD reference for split folios.
v6:
- Restore MIGRATE_PFN_COMPOUND-aware stepping so non-compound migration
entries are processed one at a time. (Sashiko)
- Drop the pre-existing fixes already covered by Matthew Brost's series:
https://patchwork.freedesktop.org/series/171651/
The lockup was observed as:
[10109.860465] watchdog: BUG: soft lockup - CPU#9 stuck for 26s! [kworker/u65:5:6557]
[10109.860524] Tainted: [S]=CPU_OUT_OF_SPEC, [O]=OOT_MODULE
[10109.860524] Hardware name: ASUS System Product Name/PRIME Z790-P WIFI, BIOS 0812 02/24/2023
[10109.860525] Workqueue: xe_page_fault_work_queue xe_pagefault_queue_work [xe]
[10109.860644] RIP: 0010:_raw_spin_unlock_irqrestore+0x57/0x80
[10109.860655] Call Trace:
[10109.860655] <TASK>
[10109.860657] folio_lruvec_lock_irqsave+0x216/0x220
[10109.860661] ? __pfx_lru_add+0x10/0x10
[10109.860665] folio_batch_move_lru+0xc8/0x450
[10109.860670] ? lock_acquire+0xc4/0x2d0
[10109.860674] ? __folio_batch_add_and_move+0x60/0x2e0
[10109.860677] ? folio_migrate_mapping+0xa6/0x110
[10109.860679] ? folio_migrate_flags+0x13b/0x1b0
[10109.860681] ? __pfx_lru_add+0x10/0x10
[10109.860683] __folio_batch_add_and_move+0xe7/0x2e0
[10109.860685] ? dma_iova_try_alloc+0xb0/0x140
[10109.860689] folio_add_lru+0x64/0x80
[10109.860691] __migrate_device_finalize+0x12c/0x270
[10109.860695] migrate_device_finalize+0x10/0x20
[10109.860698] drm_pagemap_evict_to_ram+0x185/0x370 [drm_gpusvm_helper]
[10109.860704] ? drm_pagemap_evict_to_ram+0x96/0x370 [drm_gpusvm_helper]
[10109.860709] xe_svm_bo_evict+0x15/0x20 [xe]
[10109.860819] ? xe_svm_bo_evict+0x15/0x20 [xe]
[10109.860921] xe_bo_move+0x107e/0x1570 [xe]
[10109.860992] ? xe_ttm_tt_create+0x168/0x340 [xe]
[10109.861059] ? __up_read+0x98/0x2b0
[10109.861061] ? lock_is_held_type+0xa3/0x130
[10109.861067] ttm_bo_handle_move_mem+0xe8/0x1e0 [ttm]
[10109.861075] ttm_bo_evict+0x141/0x1c0 [ttm]
[10109.861081] ttm_bo_evict_cb+0x9f/0x100 [ttm]
[10109.861086] ttm_lru_walk_for_evict+0x84/0x190 [ttm]
[10109.861091] ? xe_ttm_vram_mgr_new+0x258/0x3a0 [xe]
[10109.861198] ttm_bo_alloc_resource+0x219/0x750 [ttm]
[10109.861203] ? ttm_bo_alloc_resource+0xa9/0x750 [ttm]
[10109.861208] ? lock_acquire+0xc4/0x2d0
[10109.861214] ttm_bo_validate+0x94/0x1c0 [ttm]
[10109.861218] ? ww_mutex_trylock+0x19d/0x3d0
[10109.861219] ? _raw_write_unlock+0x22/0x50
[10109.861223] ttm_bo_init_reserved+0x17d/0x1f0 [ttm]
[10109.861228] xe_bo_init_locked+0x20a/0x620 [xe]
[10109.861294] ? __pfx_xe_ttm_bo_destroy+0x10/0x10 [xe]
[10109.861359] ? mark_held_locks+0x46/0x90
[10109.861361] ? __create_object+0x68/0xc0
[10109.861366] __xe_bo_create_locked+0x384/0xa20 [xe]
[10109.861432] ? lock_acquire+0xc4/0x2d0
[10109.861434] ? xe_drm_pagemap_populate_mm+0xd3/0x340 [xe]
[10109.861542] xe_bo_create_locked+0x23/0x40 [xe]
[10109.861609] xe_drm_pagemap_populate_mm+0x12e/0x340 [xe]
[10109.861707] ? __lock_acquire+0x43e/0x2930
[10109.861716] drm_pagemap_populate_mm+0x74/0xe0 [drm_gpusvm_helper]
[10109.861720] xe_svm_alloc_vram+0xb5/0x2c0 [xe]
[10109.861817] ? seqcount_lockdep_reader_access.constprop.0+0x9f/0xc0
[10109.861819] ? ktime_get+0x23/0x130
[10109.861821] ? trace_hardirqs_on+0x22/0xe0
[10109.861823] ? seqcount_lockdep_reader_access.constprop.0+0x9f/0xc0
[10109.861826] __xe_svm_handle_pagefault+0x77d/0xbf0 [xe]
[10109.861924] ? rwsem_down_write_slowpath+0x43a/0x9a0
[10109.861926] ? _raw_spin_unlock_irq+0x27/0x70
[10109.861928] ? rwsem_down_write_slowpath+0x43a/0x9a0
[10109.861929] ? trace_hardirqs_on+0x22/0xe0
[10109.861931] ? _raw_spin_unlock_irq+0x27/0x70
[10109.861933] ? rwsem_down_write_slowpath+0x459/0x9a0
[10109.861937] xe_svm_handle_pagefault+0x3d/0xb0 [xe]
[10109.862030] xe_pagefault_queue_work+0x1a9/0x520 [xe]
[10109.862122] process_one_work+0x239/0x730
[10109.862127] worker_thread+0x200/0x3f0
[10109.862130] ? __pfx_worker_thread+0x10/0x10
[10109.862132] kthread+0x10d/0x150
[10109.862133] ? __pfx_kthread+0x10/0x10
[10109.862135] ret_from_fork+0x3bd/0x470
[10109.862138] ? __pfx_kthread+0x10/0x10
[10109.862140] ret_from_fork_asm+0x1a/0x30
[10109.862146] </TASK>
Fixes: 99624bdff867 ("drm/gpusvm: Add support for GPU Shared Virtual Memory")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Assisted-by: Claude:claude-opus-4-8
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Arvind Yadav <arvind.yadav@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260810092845.2776097-1-arvind.yadav@intel.com
|
|
scx_cgroup_init_args carries the initial weight and bandwidth control
parameters of a cgroup to ops.cgroup_init(), but not its cpu.idle
state. A cgroup that was already configured idle before the scheduler
was loaded (or before it was onlined under it) is presented as
non-idle, and the BPF scheduler only learns about it if cpu.idle is
written again later.
Add the sched_idle state to scx_cgroup_init_args and fill it in all
four places that build the args: scx_tg_online() for cgroups onlined
under the scheduler, scx_cgroup_init() for cgroups that already exist
when the scheduler is loaded, and the sub-scheduler handover paths
scx_cgroup_claim_subtree() and scx_cgroup_return_subtree().
Verified in a VM with a probe scheduler printing the init args: a
cgroup configured cpu.idle=1 before loading shows sched_idle=1 in
ops.cgroup_init(), the default shows 0, and later cpu.idle writes
still come through ops.cgroup_set_idle(). The sub-scheduler paths
are compile-tested only.
Fixes: 347ed2d566da ("sched/ext: Implement cgroup_set_idle() callback")
Signed-off-by: Tao Cui <cuitao@kylinos.cn>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
sprd_platform_compr_open() allocates the stage 0 IRAM buffer (32K data
area) and the stage 1 DDR buffer (2M data area) with fixed sizes, but
sprd_platform_compr_copy() derives all copy lengths from the user
controlled runtime->fragment_size and the write() count, never
comparing them against the physical buffer sizes. The compress core
only checks fragment_size * fragments for an u32 overflow in
snd_compress_check_input(), so a local user can configure a logical
buffer of up to ~4GB via SNDRV_COMPRESS_SET_PARAMS, far exceeding the
fixed allocations.
A fragment_size larger than the 32K IRAM data area makes the stage 0
copy_from_user() overflow past the IRAM allocation, and a buffer_size
larger than the 2M DDR buffer makes the wrapping copy at the end of
sprd_platform_compr_copy() write fully user controlled data past the
buffer. No SNDRV_PCM_TRIGGER_START is needed, a write() in SETUP
state reaches the copy callback directly.
Reject parameters that do not fit into the fixed buffers in
set_params(), and fix the advertised max fragment size: 128K never
fitted into the 32K IRAM buffer. The caps values may have been carried over
from the qdsp6 driver, which allocates its buffers according to the
advertised maxima, unlike this driver. With 32K as max fragment size
the advertised limits are self-consistent: 32K * 64 = 2M equals the
DDR buffer size.
Discovered by Atuin - Automated Vulnerability Discovery Engine.
Fixes: cce1396936ef ("ASoC: sprd: Add Spreadtrum audio compress offload support")
Cc: stable@vger.kernel.org
Assisted-by: LLM
Signed-off-by: Tianchu Chen <flynnnchen@tencent.com>
Link: https://patch.msgid.link/4386bc53631b052c1866a91061715b009d98b04f@linux.dev
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pull workqueue fixes from Tejun Heo:
- An unbound worker pool could be freed while still reachable through
the pending-activation list, leading to a use-after-free. Unlink
before dropping the reference
- On PREEMPT_RT, the BH workqueue kick raised softirqs from preemptible
context, tripping a lockdep assertion and possibly losing
concurrently raised softirq bits
- Draining BH work off a dead CPU nests two pools' callback locks,
which lockdep misreported as recursive locking. The nesting cannot
deadlock. Annotate it
- Reject watchdog thresholds that overflow the conversion to jiffies
- Make the drgn workqueue dump script work again on kernels and vmcores
from before the workqueue attrs field rename
* tag 'wq-for-7.3-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
tools/workqueue/wq_dump.py: Support backward compatibility for wq->attrs rename
workqueue: reject watchdog thresholds that overflow jiffies
workqueue: Fix unbound pool lifetime for pending pwqs
workqueue: Use raise_softirq() to trigger softirq in irq_work handler
workqueue: Annotate cb_lock nesting when draining a dead BH pool
|
|
Pull cgroup fixes from Tejun Heo:
- After cgroup.kill was written to a cgroup, every child cloned into it
with CLONE_INTO_CGROUP was spuriously killed because the fork path
snapshotted the kill counter before resolving the target cgroup
- Releasing an isolated cpuset partition dropped the isolation of CPUs
isolated on the kernel command line
- Selftest and documentation fixes
* tag 'cgroup-for-7.3-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
selftests/cgroup: test clone3() into a previously killed cgroup
cgroup: fix spurious SIGKILL of CLONE_INTO_CGROUP children
selftests/cgroup: Add test for preserving boot-isolated CPUs
cgroup/cpuset: Preserve boot-isolated CPUs on partition release
selftests/cgroup: Drop invalid boot isolation comparison
docs: cgroup-v2: fix misc.events key format description
selftests/cgroup: Fix cg_run_in_subcgroups ignoring arg parameter
selftests/cgroup: set the test plan after the setup checks
|
|
Linus Walleij <linusw@kernel.org> says:
Repair independent correctness problems in the AB8500 codec driver:
reset sequencing, AB8505 digital microphone GPIO setup, the capture
power graph, serial format setup, and TDM slot programming. Remove the
sidetone apply control which became destructive when its coefficient
controls were removed.
Link: https://patch.msgid.link/20260831-ab8500-codec-fixes-v1-0-f85024e717e3@kernel.org
|
|
GPIO27, GPIO29 and GPIO31 provide the digital microphone clock
outputs on AB8500, but these GPIOs do not exist on AB8505. The shared
codec driver nevertheless accesses their direction register while
setting up every AB8505 codec.
Identify the parent MFD device and leave the nonexistent GPIOs
untouched on AB8505.
Fixes: 679d7abdc754 ("ASoC: codecs: Add AB8500 codec-driver")
Assisted-by: LLM
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260831-ab8500-codec-fixes-v1-6-f85024e717e3@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
After the coefficient controls were removed, writing "Apply FIR"
programs 128 zero coefficients and reports that the sidetone filter is
configured. The associated ANC configuration DAPM pins are also now
unreachable dead infrastructure.
Remove the misleading status/apply control, its private state, and the
obsolete configuration-only DAPM pins. Keep the direct sidetone reset
and remaining hardware controls.
Fixes: e366ce8b22ec ("ASoC: codecs: ab8500: Remove suspicious code")
Assisted-by: LLM
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260831-ab8500-codec-fixes-v1-5-f85024e717e3@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The interface clock ratio is selected from the slot count alone, ffs()
and fls() produce one-based hardware slot numbers, eight-channel mode
does not program any mappings, and all register errors are ignored.
Invalid masks can also leave a partially programmed interface.
Validate the complete configuration first, derive the supported BCLK
ratio from slots times slot width, use zero-based slot indices, program
deterministic eight-channel maps, and propagate register failures.
Fixes: 679d7abdc754 ("ASoC: codecs: Add AB8500 codec-driver")
Assisted-by: LLM
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260831-ab8500-codec-fixes-v1-4-f85024e717e3@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The codec programs I2S as an undelayed left-aligned format, although the
hardware manual defines delayed left-aligned as I2S compatible. It also
enables the master generator when the codec is a clock consumer, changes
registers before the complete format has been validated, and discards
register I/O errors.
Build all three interface register values before writing them, use the
required one-bit I2S delay, only run the master generator for a provider
configuration, and propagate write failures.
Fixes: 679d7abdc754 ("ASoC: codecs: Add AB8500 codec-driver")
Assisted-by: LLM
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260831-ab8500-codec-fixes-v1-3-f85024e717e3@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The capture stream routes point away from the stream widget. Digital
microphone mux routes are unconditional and bypass their enable bits,
and several widgets independently own shared AD path enable bits. The
dummy ADC and DAC widgets hide the resulting power graph errors.
Connect each real AIF widget to the stream and main supply, use the mux
item names on digital microphone routes, and model shared AD enables as
supplies. Also make the ANC DAPM switch writable.
Fixes: 679d7abdc754 ("ASoC: codecs: Add AB8500 codec-driver")
Assisted-by: LLM
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260831-ab8500-codec-fixes-v1-2-f85024e717e3@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ResetAudn is active low, but the codec probe only deasserts it. It also
clears Clk32kOut2Dis despite claiming to disable that output, and writes
codec registers before releasing reset.
Pulse ResetAudn before the first audio-bank access and leave the unused
32 kHz output disabled.
Fixes: 679d7abdc754 ("ASoC: codecs: Add AB8500 codec-driver")
Assisted-by: LLM
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260831-ab8500-codec-fixes-v1-1-f85024e717e3@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit 464e454e1cb4 ("workqueue: rename wq->unbound_attrs to wq->attrs")
renamed wq->unbound_attrs to wq->attrs. When running wq_dump.py against
older running kernels or vmcores where struct workqueue_struct still
contains unbound_attrs, drgn raises an AttributeError.
Add a wq_attrs() helper to allow wq_dump.py to inspect both older and newer
kernel versions seamlessly.
Fixes: 464e454e1cb4 ("workqueue: rename wq->unbound_attrs to wq->attrs")
Signed-off-by: Aaron Tomlin <atomlin@atomlin.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Pull sched_ext fixes from Tejun Heo:
- The task ownership check in the dispatch queue move operation raced
against the task exiting or moving to a different sub-scheduler,
spuriously triggering scheduler aborts. Fix by moving the check under
the queue lock
- The cgroup bandwidth change callback runs in a sleepable context but
sleepable implementations were rejected at load time. Allow them and
add a marker so userspace can detect the capability
- Sync tooling headers with the scx repo for accumulated compatibility
improvements
- Example scheduler fixes: ignored timer re-arm failures and vtime
credit loss on cgroup migration
- Documentation and comment fixes
* tag 'sched_ext-for-7.3-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Fix missing @slice and @vtime descriptions in finish_dispatch() kernel-doc
sched_ext: Fix several comment issues
sched_ext: Check bpf_timer_start return values in scx_qmap
sched_ext: Fix vtime delta loss in scx_flatcg cgroup migration
sched_ext: Fix timer pinning and return value in scx_central
docs/sched_ext: document that cgroup CPU knobs are scheduler-dependent
sched_ext: Fix spurious aborts in scx_bpf_dsq_move() on ownership change races
sched_ext: Sync common and compat headers from the scx repo
sched_ext: Sync tools autogen enum headers from the scx repo
Docs/admin-guide/cgroup-v2: document BPF scheduler callbacks for cpu.max and cpu.idle
sched_ext: Fix nonexistent field in sched-ext.rst example
sched_ext: Allow ops.cgroup_set_bandwidth() to be sleepable
|
|
The old git repository
git://www.linux-watchdog.org/linux-watchdog.git
is not accessible anymore, while the development of the watchdog
framework is currently handled in git.kernel.org by Guenter's
linux-staging repository.
Update the URI.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Link: https://patch.msgid.link/20260831153646.396038-1-antonio.borneo@foss.st.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
amd_pmf_get_ta_custom_bios_inputs() is used by non-debug features.
Fix the build on !CONFIG_AMD_PMF_DEBUG by moving
amd_pmf_get_ta_custom_bios_inputs() outside the ifdef CONFIG_AMD_PMF_DEBUG.
Fixes: 5bda82c797c9 ("platform/x86/amd/pmf: Implement util layer ioctl handler")
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Link: https://lore.kernel.org/all/fS7s9V_xTaedaqEAaxwKnQ@natalenko.name/
Signed-off-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>> ---
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Link: https://patch.msgid.link/20260831114346.2041361-1-pfalcato@suse.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The event codes inside asus_keymap[] span a wide range from 0x02
till 0xC5, but using ACPI_DEVICE_NOTIFY prevents us from receiving
event codes below 0x80.
Fix this by using ACPI_ALL_NOTIFY instead.
Fixes: 378500dc1313 ("platform/x86: asus-laptop: Register ACPI notify handler directly")
Reported-by: Mo Jun <royclark086@gmail.com>
Closes: https://bugs.debian.org/1146124
Tested-by: Mo Jun <royclark086@gmail.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/20260830235058.324140-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
When adding support for board 8DD6, &omen_v1_no_ec_thermal_params
was passed as driver_data instead of &omen_v1_no_ec_board_params.
Because active_board_params expects a pointer to struct
hp_wmi_board_params, dereferencing active_board_params->thermal_profile
results in a type confusion bug and invalid memory access. Update the entry
to point to omen_v1_no_ec_board_params.
Fixes: a7320d6eb9c42 ("platform/x86: hp-wmi: Add support for OMEN MAX 16-ak0xxx (8DD6)")
Cc: stable@vger.kernel.org
Signed-off-by: Arda Doğu Ari <arfeliousheres@gmail.com>
Reviewed-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260827235139.154462-1-arfeliousheres@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Avoid multiple lookups of the bpffs creator SID using the token's file
descriptor when the same information can be found via the resolved
path/dentry (in selinux_bpf_token_create()) or the token itself (in
selinux_bpf_map_create() and selinux_bpf_prog_load()). Not only does
this simplify the code, it avoids potential TOCTOU issues if the user
changes the token file descriptor passed into the kernel.
Cc: stable@vger.kernel.org
Fixes: 5473a722f782 ("selinux: add support for BPF token access control")
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Tested-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
wait_on_bit_timeout() returns 0 if the bit was cleared, -EINTR if the
process received a signal and the mode permitted wake up on that signal,
or -EAGAIN if the timeout elapsed. It never returns 1.
Hence the check "err == 1" in mrvl_load_firmware() is dead code: when
the waiting task is interrupted by a signal (-EINTR), the code falls
into the "else if (err)" branch and misreports it as "Firmware request
timeout" with -ETIMEDOUT instead of propagating -EINTR.
Fix this by testing for -EINTR so that an interrupted firmware load is
properly detected and reported.
Fixes: 162f812f23ba ("Bluetooth: hci_uart: Add Marvell support")
Signed-off-by: Gongwei Li <ligongwei@kylinos.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
l2cap_ecred_defer_connect() clears FLAG_DEFER_SETUP also for channels
with different PID/PSM, which will not be added to the same
ECRED_CONN_REQ in any case. Consequently, only one ECRED connection
group can work at a time although it appears intended they would be
separate for each PID/PSM combination.
Fix by clearing FLAG_DEFER_SETUP only for the connections that could be
added in the request. Retain test_bit(FLAG_DEFER_SETUP) before calling
get_peer_pid as it may be NULL otherwise.
Fixes: da49b602f7f7 ("Bluetooth: L2CAP: Use DEFER_SETUP to group ECRED connections")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
l2cap_chan_connect() tries to ensure there are no more than
L2CAP_ECRED_CONN_SCID_MAX pending ECRED channels, so they fit in the
same L2CAP_ECRED_CONN_REQ that l2cap_ecred_connect() constructs.
However, the check only counts deferred channels. If 6 L2CAP sockets
are connected at the same time in order DDDDND (D=deferred,
N=non-deferred), the last can bump the total to max+1. It results to
one __le16 written out of bounds of the scid array, and an invalid
ECRED_CONN_REQ being sent.
Fix by leaving room for the non-deferred pending ECRED channels in the
counting in l2cap_chan_connect(), so the limit can't be exceeded.
Move counting under same critical section where the channel is added.
Although race conditions involving this appear unreachable, it's easier
to see.
Also add WARN_ON_ONCE check in l2cap_ecred_defer_connect() to make this
less brittle.
Fixes: da49b602f7f7 ("Bluetooth: L2CAP: Use DEFER_SETUP to group ECRED connections")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
l2cap_new_connection() sets default value of channel mode to match the
parent channel. l2cap_le_connect_req() left this at the default, and
created L2CAP_MODE_EXT_FLOWCTL channels if listening pchan has that
mode. This causes FLAG_DEFER_SETUP channels to reply to
L2CAP_LE_CONN_REQ with L2CAP_ECRED_CONN_RSP, which is incorrect.
It can also result to stack OOB write (of l2cap_alloc_cid determined
values) in l2cap_ecred_rsp_defer(), as l2cap_le_connect_req() does not
limit maximum number of deferred channels or check for duplicate ident.
Fix by setting chan->mode correctly in l2cap_le_connect_req().
Also check channel mode in l2cap_ecred_rsp_defer(), and do WARN_ON_ONCE
instead of OOB write to make it less brittle.
Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
In hci_register_dev(), the power_on work item is queued to
hdev->req_workqueue before initializing hdev->adv_monitors_idr and
registering the MSFT extension via msft_register(). For devices marked with
quirks such as HCI_QUIRK_RAW_DEVICE, the HCI_UNCONFIGURED flag is set on
the device. When the power_on work item runs concurrently on another CPU,
hci_power_on() detects that the device is unconfigured and immediately
invokes hci_dev_do_close(), which calls msft_do_close().
Concurrently, msft_register() allocates the msft structure and exposes it
to hdev->msft_data prior to calling mutex_init(&msft->filter_lock). If
msft_do_close() executes while hdev->msft_data is already assigned but the
mutex has not yet been initialized, mutex_lock(&msft->filter_lock) operates
on an uninitialized mutex, triggering a DEBUG_LOCKS warning:
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: kernel/locking/mutex.c:625 at __mutex_lock_common
kernel/locking/mutex.c:625 [inline]
WARNING: kernel/locking/mutex.c:625 at __mutex_lock+0x12d8/0x1550
kernel/locking/mutex.c:821
...
Call Trace:
<TASK>
msft_do_close+0x308/0x7b0 net/bluetooth/msft.c:693
hci_dev_close_sync+0x86b/0x10a0 net/bluetooth/hci_sync.c:5522
hci_dev_do_close net/bluetooth/hci_core.c:499 [inline]
hci_power_on+0x32c/0x750 net/bluetooth/hci_core.c:937
process_one_work kernel/workqueue.c:3322 [inline]
process_scheduled_works+0xa8e/0x14e0 kernel/workqueue.c:3405
worker_thread+0x92d/0xe10 kernel/workqueue.c:3486
kthread+0x388/0x470 kernel/kthread.c:436
ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
Fix this by moving the queue_work() call in hci_register_dev() to after
idr_init(&hdev->adv_monitors_idr) and msft_register(hdev) so that device
structures and extensions are fully initialized before asynchronous tasks
can access them. Additionally, assign hdev->msft_data in msft_register()
only after mutex_init(&msft->filter_lock) has completed.
Fixes: 9e14606d8f38 ("Bluetooth: msft: Extended monitor tracking by address filter")
Assisted-by: Gemini:gemini-3.7-flash Gemini:gemini-3.1-pro-preview syzbot
Reported-by: syzbot+14ce1b05b7d5a989abbe@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=14ce1b05b7d5a989abbe
Link: https://syzkaller.appspot.com/ai_job?id=2bc9e8aa-ca6d-43e2-be2c-fd5d9f649d7e
Signed-off-by: Aleksandr Nogikh <nogikh@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Pull xfs fixes from Carlos Maiolino:
"This contains a few fixes for the zoned storage support, a possible
deadlock vector fix, some code refactoring patches and a quota evasion
fix on XFS while exporting it via NFS.
Please note that for the quota evasion fix, a couple patches for the
capability subsystem are included in the pull request. Those have been
ack'ed by the respective maintainer which also agreed to have them
going through the xfs tree.
This also includes a patch for the quota subsystem to stop issuing
audit messages during quota enforcing. Quota maintainer also ack'ed
and agreed with this going through xfs tree"
* tag 'xfs-fixes-7.3-rc2' of gitolite.kernel.org:/pub/scm/fs/xfs/xfs-linux:
capability: unexport has_capability_noaudit
xfs: replace ns_capable_noaudit
quota: Don't issue audit messages on quota enforcing
capability: Add new capable_noaudit
xfs: fix capability check in xfs
xfs: restore bi_bdev in xfs_zone_gc_write_chunk
xfs: split ioend handling into a separate source file
xfs: factor out a xfs_iomap_set_anon_write helper
xfs: fix zoned write iomap flags assignments
xfs: fix racy open zone caching
xfs: handle NULL open_zone for merged ioends in xfs_ioend_put_open_zones
xfs: use inode_init_always_gfp with __GFP_NOFAIL in xfs_inode_alloc
xfs: remove kmem_to_page()
xfs: don't flush and invalidate internal RT device twice in xfs_shutdown_devices
xfs: split an assert in xfs_trans_log_buf
xfs: don't hold buffer locks across sync transaction commit in xfs_sync_sb_buf
|
|
btintel_read_version_tlv() ignores the parser return value, so setup
continues with partially initialized version data after a malformed TLV
causes parsing to stop.
Return the parser error to the caller so an invalid response fails setup
instead of being treated as successful. Keep this behavioral change
separate from the bounds checks so it can be reverted independently if
an existing controller sends malformed data.
Signed-off-by: Laxman Acharya Padhya <acharyalaxman8848@gmail.com>
Reviewed-by: Ali Ahmet Memis <ali@iusegentoo.com>
Tested-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The firmware ID is treated as a NUL-terminated string even though the
TLV length is its only boundary. If the value does not contain a NUL
terminator, snprintf() can read beyond the received response.
Limit the conversion to the advertised TLV value length.
Fixes: 164c62f958f8 ("Bluetooth: btintel: Add firmware ID to firmware name")
Reviewed-by: Ali Ahmet Memis <ali@iusegentoo.com>
Signed-off-by: Laxman Acharya Padhya <acharyalaxman8848@gmail.com>
Tested-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
btintel_parse_version_tlv() verifies that a complete TLV is present in
the response, but it does not ensure that the value is long enough for
the specific TLV type. A short value can therefore cause an
out-of-bounds read through get_unaligned_le16(), get_unaligned_le32(),
or memcpy().
Reject values shorter than the minimum required by each known TLV type.
Also reject responses that do not contain the Command Complete Status
field.
Fixes: 57375beef71a ("Bluetooth: btintel: Add infrastructure to read controller information")
Reviewed-by: Ali Ahmet Memis <ali@iusegentoo.com>
Signed-off-by: Laxman Acharya Padhya <acharyalaxman8848@gmail.com>
Tested-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The watchdog threshold is supplied in seconds but is multiplied by HZ
before being used as a jiffies interval. Reject values that exceed
MAX_JIFFY_OFFSET / HZ so the multiplication cannot wrap and the
time_after() comparisons remain within their supported range.
The check is performed before changing the threshold or watchdog timer.
Zero remains the value used to disable the watchdog.
Fixes: 82607adcf9cdf ("workqueue: implement lockup detector")
Signed-off-by: Jiacheng Xu <stitch@zju.edu.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Commit 13f1eae3b662 ("sched_ext: Synchronize slice and dsq_vtime
writes") added the slice and vtime parameters to finish_dispatch() but
did not update its kernel-doc, which produces warnings:
Warning: function parameter 'slice' not described in 'finish_dispatch'
Warning: function parameter 'vtime' not described in 'finish_dispatch'
Describe both parameters using the same wording as
dispatch_to_local_dsq(), which receives the same values.
Signed-off-by: Liang Luo <luoliang@kylinos.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
On spurious interrupt where the TX and RX causes are not set, driver was
not clearing the auto mask which can block all the interrupts. Driver
needs to clear the automask even if no causes are set.
Fixes: c2b636b3f788 ("Bluetooth: btintel_pcie: Add support for PCIe transport")
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Fix several comment issues found during review:
__setschduler_prio() -> __setscheduler_class()
scx_iter_scx_dsq_new() -> bpf_iter_scx_dsq_new()
scx_next_task_scx() -> set_next_task_scx()
Signed-off-by: Wanwu Li <liwanwu@kylinos.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
monitor_timerfn(), lowpri_timerfn() and round_robin_timerfn() ignore
bpf_timer_start()'s return value: a failed re-arm silently stops the
periodic heartbeat, starving every task parked in LOWPRI_DSQ (lowpri)
or freezing cid rotation (round-robin). Check the returns and raise
scx_bpf_error(), matching the init paths.
Signed-off-by: Wanwu Li <liwanwu@kylinos.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
fcg_cgroup_move() lost the signed vtime offset across cgroup
migration in the mechanical conversion to time helpers:
time_delta() clamps negative deltas to 0, so a queued task (whose
dsq_vtime is normally behind the source frontier) loses its
accumulated vtime credit and lands exactly at the destination
frontier instead of keeping its relative position. Restore the
wrapping signed subtraction.
Fixes: 62addc6dbf36 ("sched_ext: Use time helpers in BPF schedulers")
Signed-off-by: Wanwu Li <liwanwu@kylinos.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
central_timerfn() re-arms the timer with a hardcoded
BPF_F_TIMER_CPU_PIN flag and ignores the return value, defeating
start_central_timer()'s -EINVAL fallback for kernels without the flag
(<6.7): on such kernels the first tick kills the timer permanently
with no diagnostic. Honor timer_pinned and check the return like
the initial arm does.
Fixes: 22a920209ab6 ("sched_ext: Implement tickless support")
Signed-off-by: Wanwu Li <liwanwu@kylinos.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
In qcom_pas_stop function, return value of qcom_pas_shutdown for pas_id
is overwritten by the return value of qcom_pas_shutdown for dtb_pas_id.
This causes errors seen on qcom_pas_shutdown failures for pas_id to be
masked to the caller. This might lead to issues where the memory regions
locked by PAS, as part of qcom_pas_auth_and_reset, are not released for
access by linux and rproc_coredump flow will end up accessing the locked
memory, leading to an access violation.
Fix this by using a separate variable for the dtb_pas_id shutdown call
and only overriding the main return value if the pas_id shutdown succeeded
but dtb_pas_id shutdown failed.
Fixes: 29814986b82e ("remoteproc: qcom_q6v5_pas: add support for dtb co-firmware loading")
Signed-off-by: Vignesh Viswanathan <vignesh.viswanathan@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260819-rproc_dtb_fix-v1-1-cb6be7f93bc9@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
When a sink detach occurs while waiting for TX send status, the old
TCPM_SOURCING_VBUS event along with TCPM_VBUS_EVENT and TCPM_CC_EVENT
can be queued in port->pd_events. Because TCPM_SOURCING_VBUS is
evaluated after TCPM_VBUS_EVENT and TCPM_CC_EVENT in
tcpm_pd_event_handler(), a stale TCPM_SOURCING_VBUS event can override
the detach handling and incorrectly set port->vbus_source and
port->vbus_present to true.
Add a state guard to check that the port is either operating as a
Source (tcpm_port_is_source(port)) or in a Fast Role Swap (FRS) state
up to FR_SWAP_SNK_SRC_SOURCE_VBUS_APPLIED before processing
TCPM_SOURCING_VBUS. Otherwise, discard and log the event.
Log snippet for error condition before fix:
[72792.204955] state change SRC_ATTACHED -> SRC_STARTUP [rev3 NONE_AMS]
[72792.204960] sourcing vbus
[72792.204962] VBUS on
[72792.204970] AMS POWER_NEGOTIATION start
[72792.204974] cc:=4
[72792.205319] state change SRC_STARTUP -> AMS_START [rev3 POWER_NEGOTIATION]
[72792.205325] state change AMS_START -> SRC_SEND_CAPABILITIES [rev3 POWER_NEGOTIATION]
[72792.205332] PD TX, header: 0x11a1
[72792.216911] PD TX complete, status: 2
[72792.216957] pending state change SRC_SEND_CAPABILITIES -> SRC_SEND_CAPABILITIES @ 150 ms [rev3 POWER_NEGOTIATION]
[72792.218005] VBUS off
[72792.218013] pending state change SRC_SEND_CAPABILITIES -> SNK_UNATTACHED @ 650 ms [rev3 POWER_NEGOTIATION]
[72792.218020] VBUS VSAFE0V
[72792.218024] state change SRC_SEND_CAPABILITIES -> SNK_UNATTACHED [rev3 POWER_NEGOTIATION]
[72792.218458] CC1: 2 -> 0, CC2: 0 -> 0 [state SNK_UNATTACHED, polarity 0, disconnected]
[72792.218467] VBUS on --> VBUS left on
[72792.218980] disable vbus discharge ret:0
[72792.235193] Start toggling
After fix:
[ 1195.291691] state change SRC_ATTACHED -> SRC_STARTUP [rev3 NONE_AMS]
[ 1195.291698] sourcing vbus
[ 1195.291700] VBUS on
[ 1195.291707] AMS POWER_NEGOTIATION start
[ 1195.291710] cc:=4
[ 1195.291758] state change SRC_STARTUP -> AMS_START [rev3 POWER_NEGOTIATION]
[ 1195.291794] state change AMS_START -> SRC_SEND_CAPABILITIES [rev3 POWER_NEGOTIATION]
[ 1195.291798] PD TX, header: 0x11a1
[ 1195.297056] PD TX complete, status: 2
[ 1195.297092] pending state change SRC_SEND_CAPABILITIES -> SRC_SEND_CAPABILITIES @ 150 ms [rev3 POWER_NEGOTIATION]
[ 1195.297177] VBUS off
[ 1195.297184] pending state change SRC_SEND_CAPABILITIES -> SNK_UNATTACHED @ 650 ms [rev3 POWER_NEGOTIATION]
[ 1195.297227] CC1: 2 -> 0, CC2: 0 -> 0 [state SRC_SEND_CAPABILITIES, polarity 0, disconnected]
[ 1195.307469] cc:=2
[ 1195.307544] pending state change SRC_SEND_CAPABILITIES -> SNK_UNATTACHED @ 650 ms [rev3 POWER_NEGOTIATION]
[ 1195.307555] Discarding sourcing vbus! Invalid state SRC_SEND_CAPABILITIES
[ 1195.957636] state change SRC_SEND_CAPABILITIES -> SNK_UNATTACHED [delayed 650 ms]
[ 1195.957732] disable vbus discharge ret:0
[ 1195.970196] Start toggling
[ 1195.970468] VBUS off
[ 1196.051637] VBUS off
[ 1196.051642] VBUS VSAFE0V
Fixes: 8dc4bd073663 ("usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS)")
Cc: stable <stable@kernel.org>
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260827-sourcing-vbus-v1-1-9be1aca991a0@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
During adsp_map_carveout, the IOVA is computed by combining the
physical address and the SID:
iova = adsp->mem_phys | (sid << 32);
However, adsp_unmap_carveout() uses the physical address and not
the IOVA in iommu_unmap(), causing the unmap to fail or leak
mappings because the address doesn't match the original IOVA.
Cache the constructed IOVA within the qcom_adsp device struct
during mapping and use it during unmapping.
Fixes: f22eedff28af ("remoteproc: qcom: Add support for memory sandbox")
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Link: https://lore.kernel.org/r/20260827203055.640116-1-smostafa@google.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Commit f3b1357673dd ("remoteproc: qcom_q6v5_mss: Switch to generic PAS
TZ APIs") changed the probe-time gate for need_mem_protection platforms
from qcom_scm_is_available() to qcom_pas_is_available(). Memory
protection in this driver is implemented with qcom_scm_assign_mem(),
which is a TZ service distinct from PAS. The only PAS call in the driver
is qcom_pas_mem_setup(), and it is already guarded by need_pas_mem_setup.
No descriptor sets both flags: sc7180, sc7280, sdm660, sdm845, msm8996
and msm8998 set need_mem_protection only, while msm8937, msm8940 and
msm8953 set need_pas_mem_setup only. On TrustZone firmware that does not
implement PAS - for example SC7180 Chromebooks, where call-availability
queries report every QCOM_SCM_SVC_PIL command as unavailable - the modem
consequently never probes:
platform 4080000.remoteproc: deferred probe pending: (reason unknown)
On those machines the modem is also what loads the WLAN firmware, so
ath10k never receives QMI and wifi does not come up either.
Gate memory protection on SCM availability as it was before, and require
PAS only where a PAS call is actually issued. Keeping the SCM check
matters: qcom_scm_assign_mem() passes __scm->mempool to
qcom_tzmem_alloc() without testing __scm, so dropping the gate entirely
would allow a NULL dereference when qcom_scm has not yet probed.
Fixes: f3b1357673dd ("remoteproc: qcom_q6v5_mss: Switch to generic PAS TZ APIs")
Link: https://lore.kernel.org/r/20260808034716.58888-1-phollinsky@holtechnik.com
Signed-off-by: Paul Hollinsky <phollinsky@holtechnik.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260821081540.89137-1-phollinsky@holtechnik.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Once cgroup.kill had been written to a cgroup, a stale kill_seq
snapshot (taken in cgroup_css_set_fork() before the target cgroup was
resolved) caused every child subsequently cloned into that cgroup with
clone3(CLONE_INTO_CGROUP) to be SIGKILLed on the spot.
Add a regression test: create a cgroup, kill it while it is empty,
then clone a child into it and check that the child runs and exits
cleanly. On a kernel without the fix, the test fails:
not ok 4 test_cgkill_clone_into_killed
The test is skipped on kernels without clone3() or without
CLONE_INTO_CGROUP.
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Assisted-by: LLM
Signed-off-by: Etienne Perot <eperot@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Since commit b69bb476dee9 ("cgroup: fix race between fork and
cgroup.kill"), the fork path snapshots the kill_seq of the child's
future cgroup into kargs->kill_seq, and cgroup_post_fork() SIGKILLs
the child if that cgroup's kill_seq has changed in the meantime, to
catch forks racing with a cgroup.kill sweep.
For CLONE_INTO_CGROUP, however, the snapshot in cgroup_css_set_fork()
is taken before the target cgroup has been resolved: kargs->cgrp is
always NULL at this point (it is only set at the end of the function).
So the "if (kargs->cgrp)" branch is dead code and the snapshot always
records the kill_seq of the parent's cgroup. cgroup_post_fork() then
compares it with the kill_seq of the target cgroup, so the child gets
SIGKILLed whenever the two cgroups have been killed a different number
of times.
As a result, once cgroup.kill has been written to a cgroup, every
child subsequently cloned into it with clone3(CLONE_INTO_CGROUP) is
killed on the spot, for as long as the cgroup exists: kill_seq is not
exposed to userspace and never resets.
Re-snapshot kill_seq from the target cgroup once it has been resolved,
and drop the dead branch at the early snapshot site.
This does not reopen the race fixed by b69bb476dee9. For
CLONE_INTO_CGROUP, everything from the snapshot to the check in
cgroup_post_fork() runs with cgroup_mutex held, and kill_seq is
only ever incremented under cgroup_mutex.
tj: Updated the comment above kill_seq to reflect the new serialization
rules as suggested by Shakeel Butt.
Fixes: b69bb476dee9 ("cgroup: fix race between fork and cgroup.kill")
Cc: stable@vger.kernel.org
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Assisted-by: LLM
Signed-off-by: Etienne Perot <eperot@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
qcom_pas_attach() unmasks the handover IRQ and marks handover_issued
even though this driver instance never runs qcom_q6v5_prepare() for
the boot it is attaching to. This was believed necessary to flush a
stale interrupt latched at the interrupt controller while masked, but
the handover IRQ is a Qualcomm SMP2P soft IRQ, not a real edge-latched
hardware interrupt. The Linux SMP2P driver updates its cached value
unconditionally on every notification and only delivers the nested IRQ
for bits currently enabled in its own software bitmap, so a transition
that happens while masked is simply dropped, never replayed on a later
unmask.
Since there is nothing to flush, and this driver instance never takes
the proxy power-domain/clock/regulator votes that the handover
callback would tear down, there is no need to unmask the IRQ in
attach() at all. Drop the enable_irq()/disable_irq() pair; setting
handover_issued = true is sufficient to keep the flag consistent for
the eventual qcom_q6v5_unprepare()/qcom_q6v5_prepare() cycle.
It fixes the following unbalanced runtime PM usage and IRQ enable
warnings seen on Nord ADSP (probed as attached), after commit bb7c5d6f5b41
("remoteproc: qcom: q6v5: Make handover IRQ one-shot") comes in place.
root@iq10-rrd:~# cat /sys/class/remoteproc/remoteproc0/state
attached
root@iq10-rrd:~# echo stop > /sys/class/remoteproc/remoteproc0/state
[ 40.004874] genpd genpd:0:4c00000.remoteproc: Runtime PM usage count underflow!
[ 40.012409] genpd genpd:1:4c00000.remoteproc: Runtime PM usage count underflow!
[ 40.050074] remoteproc remoteproc0: stopped remote processor adsp
root@iq10-rrd:~# echo start > /sys/class/remoteproc/remoteproc0/state
[ 44.350298] remoteproc remoteproc0: powering up adsp
[ 44.375769] remoteproc remoteproc0: Booting fw image qcom/nord/adsp.mbn, size 8241816
[ 44.389850] PDM: no support for the platform, userspace daemon might be required.
[ 44.397864] ------------[ cut here ]------------
[ 44.402633] Unbalanced enable for IRQ 363
[ 44.406779] WARNING: kernel/irq/manage.c:775 at __enable_irq+0x4c/0x7c, CPU#9: sh/791
...
Suggested-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260801011731.1084591-1-shengchao.guo@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
ARCH_INTEL_SOCFPGA selects CACHE_L2X0 and several PL310 erratum
workarounds. The 753970 workaround is still conditioned on PL310, but that
Kconfig symbol no longer exists, so this one selection is always disabled.
Select PL310_ERRATA_753970 directly, consistently with the other PL310
workarounds required by the platform.
Fixes: fbc125afdc50 ("ARM: socfpga: Turn on ARM errata for L2 cache")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
Selvamani Rajagopal
Bryam Vargas
Rudi Heitbaum
Arvind Yadav
Tao Cui
Tianchu Chen
Linus Torvalds
Mark Brown
Linus Walleij
Aaron Tomlin
Antonio Borneo
Pedro Falcato
Armin Wolf
Arda Doğu Ari
Paul Moore
Gongwei Li
Pauli Virtanen
Aleksandr Nogikh
Laxman Acharya Padhya
Jiacheng Xu
Liang Luo
Kiran K
Wanwu Li
Vignesh Viswanathan
Amit Sunil Dhamne
Mostafa Saleh
Paul Hollinsky
Etienne Perot
Shawn Guo
Pengpeng Hou