| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
There's no need to crash the kernel for this case.
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
On DCN42B the SMU reports its DpmClocks table in a different
layout than DCN42, with extra clock domains. The clk_mgr was
parsing it with the DCN42 layout.
[How]
Add a DCN42B DpmClocks struct and a dcn42b_get_smu_clocks() that
allocates and parses the DCN42B layout, reusing the shared dcn42
helpers so DCN42 is untouched. Populate DCF, SOC, DISP, DPP and
FCLK levels and the memory pstate table.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
amdgpu_vm_clear_freed() allocates an amdgpu_sync object and walks the VM
reservation fences via amdgpu_sync_resv() before checking whether vm->freed
has anything to clear. Return early when the list is empty to skip this
overhead on a hot path (every GEM close and command submission).
Signed-off-by: Bob Zhou <bobzhou2@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support for the SG Micro SGM41542 charger/boost converter.
Driver was adapted from Rockchip BSP driver [1] and confirmed
with vendor datasheet [2].
[1] https://github.com/rockchip-linux/kernel/blob/develop-6.6/drivers/power/supply/sgm41542_charger.c
[2] https://www.sg-micro.de/rect/assets/1e8de70b-657e-4156-be68-a64fdbe8e418/SGM41541_SGM41542.pdf
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://patch.msgid.link/20260728203832.166402-3-macroalpha82@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Document the SG Micro sgm41542 battery charger/boost converter.
The parameters of input-current-limit-microamp and
input-voltage-limit-microvolt are defined as such since they are in
common use among multiple bindings currently.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260728203832.166402-2-macroalpha82@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Add trace event definitions for the Qualcomm GENI (Generic Interface)
I2C driver. These trace events enable runtime debugging and performance
analysis of I2C operations.
The trace events capture I2C clock configuration, interrupt status and
error code and message.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260703-add-tracepoints-for-qcom-geni-i2c-v2-2-e8bf8b178290@oss.qualcomm.com
|
|
Add trace event support to the Qualcomm GENI I2C driver to enable
detailed runtime debugging and analysis.
The trace events capture I2C clock configuration, interrupt status
and error code and message.
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260703-add-tracepoints-for-qcom-geni-i2c-v2-1-e8bf8b178290@oss.qualcomm.com
|
|
The QUP I2C driver treats the core and iface clocks as required
resources, but qup_i2c_enable_clocks() ignores clk_prepare_enable()
failures. Probe can then continue to register the I2C adapter, and
runtime/system resume can return success, even when a required clock
transition failed.
Make the helper return an error, unwind a partially enabled clock, and
propagate failures from probe and resume paths.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260624055237.29977-1-pengpeng@iscas.ac.cn
|
|
cci_resume() unconditionally calls cci_resume_runtime() regardless of
the runtime PM state.
If the device is already runtime-suspended before system suspend,
the clock is re-enabled while runtime_status remains RPM_SUSPENDED.
As a result, pm_request_autosuspend() does not arm the timer,
leaving the clock permanently enabled.
Fixes: e517526195de ("i2c: Add Qualcomm CCI I2C driver")
Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
Cc: <stable@vger.kernel.org> # v5.8+
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260625-cci-v1-1-a100cda673ce@oss.qualcomm.com
|
|
In i2c_imx_unreg_slave(), the slave pointer is set to NULL after
disabling interrupts. However, a pending interrupt might already
have started the hrtimer (i2c_imx_slave_timeout) before the pointer
was cleared. If the hrtimer fires after i2c_imx->slave is set to
NULL, the timer callback i2c_imx_slave_finish_op() will call
i2c_imx_slave_event() with a NULL slave pointer, which results in a
use-after-free / NULL pointer dereference.
Fix by canceling the hrtimer and waiting for it to complete after
disabling interrupts, before clearing the slave pointer.
Fixes: f7414cd6923f ("i2c: imx: support slave mode for imx I2C driver")
Signed-off-by: Liem <liem16213@gmail.com>
Cc: <stable@vger.kernel.org> # v5.11+
Acked-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260629023829.152651-3-liem16213@gmail.com
|
|
In i2c_imx_reg_slave(), the slave pointer was assigned before
pm_runtime_resume_and_get(). If pm_runtime_resume_and_get() failed,
the error path returned without clearing i2c_imx->slave, leaving it
non-NULL and causing all subsequent registration attempts to fail
with -EBUSY.
Additionally, because this driver uses a shared IRQ, the interrupt
handler i2c_imx_isr() can execute concurrently and, after acquiring
slave_lock, dereference i2c_imx->slave. The previous fix attempt
added a lockless i2c_imx->slave = NULL on the error path, but that
could race with the ISR under the lock and still cause a NULL pointer
dereference.
Fix both issues by deferring the assignment of i2c_imx->slave and
i2c_imx->last_slave_event to after a successful resume, and by
performing the assignment inside the slave_lock critical section.
This guarantees that the slave pointer is never left stale on the
error path and is always valid when observed by the interrupt handler.
Fixes: f7414cd6923f ("i2c: imx: support slave mode for imx I2C driver")
Signed-off-by: Liem <liem16213@gmail.com>
Cc: <stable@vger.kernel.org> # v5.11+
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Carlos Song <carlos.song@nxp.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260629023829.152651-2-liem16213@gmail.com
|
|
Unlike IO_CMD / IO64_CMD, NVME_IOCTL_SUBMIT_IO never calls
nvme_cmd_allowed(). Unprivileged callers can thus issue I/O on a
partition device or write through a read-only file descriptor.
Pass flags and open_for_write through and reject disallowed commands
with -EACCES.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yang Xiuwei <yangxiuwei@kylinos.cn>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Since commit 55b48e23f5c4 ("genirq/devres: Add error handling in
devm_request_*_irq()"), devm_request_irq() automatically logs
detailed error messages on failure. Remove the now-redundant
driver-specific dev_err_probe() calls.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
nvme_pci_configure_admin_queue() enables the controller and then requests
the admin queue interrupt. If queue_request_irq() fails it returns without
disabling the controller, and no caller compensates: nvme_pci_enable() only
frees the IRQ vectors and calls pci_disable_device(), after which
nvme_dev_disable() treats the controller as dead and skips nvme_disable_ctrl().
The controller is left enabled (CC.EN set) on this error path.
Disable it in the failure path, while the PCI device is still enabled so the
CC.EN clear handshake completes.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code.
Fixes: b60503ba432b ("NVMe: New driver")
Cc: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Now that all on-stack maps use CLASS(kvm_vcpu_map_local), i.e. now that all
maps are zero-allocated, explicitly put any existing mappings/references
when establishing a new mapping to harden against KVM bugs leaking memory,
but yell loudly as the owner of the map is still ultimately responsible for
the lifecycle of the mapping.
Suggested-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260724004757.131420-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Convert the kvm_vcpu_map() usage in PPC dcbz patching to the new
CLASS(kvm_vcpu_map_local) implementation, to eliminate the very last of the
the open-coded on-stack "struct kvm_host_map" declarations. This will
allow adding hardening kvm_vcpu_map() against memory leaks (due to
clobbering the existing mapping).
No functional change intended.
Link: https://patch.msgid.link/20260724004757.131420-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Convert the kvm_vcpu_map_readonly() usage in nVMX's MSR bitmap merging to
the new CLASS(kvm_vcpu_map_local_readonly) implementation, to eliminate the
last of the open-coded on-stack "struct kvm_host_map" declarations (in x86,
PPC still has one more to convert).
No functional change intended.
Link: https://patch.msgid.link/20260724004757.131420-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Convert the kvm_vcpu_map() usage in the enter/leave SMM flows to the new
CLASS(kvm_vcpu_map_local) implementations, to eliminate the need to
manually do unmap() in error paths, and more importantly to eliminate more
of the open-coded on-stack "struct kvm_host_map" declarations.
No functional change intended.
Link: https://patch.msgid.link/20260724004757.131420-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add CLASS() definitions for locally mapping a PFN using kvm_vcpu_map()
given a vCPU+gfn pair. In addition to eliminating the need to manually
do unmap(), e.g. in error paths, this will allow hardening KVM against
double-mapping without having to manually ensure every on-stack declaration
is zero-initialized.
Use "map local" as the primary terminology as the basic concept is more or
less the same as kmap_local(): ensure the current context has a kernel
mapping to the underlying memory.
Immediately convert the relatively straightforward nested SVM flows, and
defer converting the more involved SMM flows to a separate change.
No functional change intended.
Cc: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260724004757.131420-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Always check and clear KVM_REQ_GET_NESTED_STATE_PAGES when emulating a
nested VM-Exit to ensure the request is cleared, even when KVM was built
with CONFIG_KVM_HYPERV=n, as KVM subtly relies on the "check" to clear
the flag and thus avoid double-mapping the vmcs12 pages, e.g. if KVM
manages to bail from VM-Enter without processing the request, and then
emulates VMLAUNCH or VMRESUME.
Fixes: b4f69df0f65e ("KVM: x86: Make Hyper-V emulation optional")
Cc: stable@vger.kernel.org
Reported-by: Yosry Ahmed <yosry@kernel.org>
Reviewed-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260724004757.131420-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Pull x86 platform driver fix from Ilpo Järvinen:
- Fix ACPI _DSM function index and bitmask usage for Dell DW5826e
* tag 'platform-drivers-x86-v7.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: dell-dw5826e: fix ACPI _DSM function index and bitmask usage
|
|
If a transaction times out, the START_BUSY signal can stay up, and
subsequent transactaction attempts will fail as the bus is still
considered busy.
I can easily trigger this by attempting to read from an address with no
device, e.g. when running i2cdetect. After the first read times out, all
subsequent read attempts return busy.
To get to a working state again, the controller needs to be reset to
clear the START_BUSY signal. So check for START_BUSY still asserted on a
timeout, and do reset in case it is,
This is also done by the original non-upstream iproc-smbus driver
implementation [1].
Works around situations like:
bcm-iproc-2c 1803b000.i2c: transaction timed out
bcm-iproc-2c 1803b000.i2c: bus is busy
bcm-iproc-2c 1803b000.i2c: bus is busy
bcm-iproc-2c 1803b000.i2c: bus is busy
bcm-iproc-2c 1803b000.i2c: bus is busy
bcm-iproc-2c 1803b000.i2c: bus is busy
...
where the bus never recovers after a timeout.
[1] https://github.com/opencomputeproject/onie/blob/master/patches/kernel/3.2.69/driver-iproc-smbus.patch
Fixes: e6e5dd3566e0 ("i2c: iproc: Add Broadcom iProc I2C Driver")
Signed-off-by: Jonas Gorski <jonas.gorski@bisdn.de>
Cc: <stable@vger.kernel.org> # v4.0+
Acked-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260717085507.34209-1-jonas.gorski@bisdn.de
|
|
Pull hardening fixes from Kees Cook:
- lkdtm: fix missed rename of STACKLEAK_ERASING to KSTACK_ERASE
(Haofeng Li)
- selftests/seccomp: Fix pointer type mismatch build error
(Kuan-Ying Lee)
- tests/fortify: Disable -Wstringop-overread (Nathan Chancellor)
* tag 'hardening-v7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests/seccomp: Fix pointer type mismatch build error
selftests/lkdtm: rename STACKLEAK_ERASING to KSTACK_ERASE
fortify: Disable -Wstringop-overread in tests
|
|
sco_conn_del() drops a reference it does not own. It takes one transient
reference via sco_conn_hold_unless_zero() and releases it with the
sco_conn_put() that follows sco_sock_hold(); the additional put in the
!sk branch releases a second one:
conn = sco_conn_hold_unless_zero(conn);
...
sk = sco_sock_hold(conn);
sco_conn_unlock(conn);
sco_conn_put(conn);
if (!sk) {
sco_conn_put(conn);
return;
}
When close() races the controller's Disconnection Complete, sco_chan_del()
clears conn->sk and drops the socket's reference while sco_conn_del() is
running. sco_conn_del() then sees sk == NULL, its own put drops the count
to zero and frees the conn, and the second put writes to the freed kref:
BUG: KASAN: slab-use-after-free in sco_conn_put.part.0+0x1a/0x190
Write of size 4 at addr ffff8881099dec74 by task kworker/u17:3/413
Workqueue: hci1 hci_rx_work
Call Trace:
sco_conn_put.part.0+0x1a/0x190
hci_disconn_complete_evt+0x1ee/0x3e0
hci_event_packet+0x54a/0x650
hci_rx_work+0x321/0x3d0
Allocated by task 413:
sco_conn_add+0x72/0x1a0
sco_connect_cfm+0x88/0x670
Freed by task 413:
sco_conn_del.isra.0+0x3f/0xf0
hci_disconn_complete_evt+0x1ee/0x3e0
refcount_t: underflow; use-after-free.
The root cause is that the socket stores the connection without holding a
reference of its own. __sco_chan_add() does:
sco_pi(sk)->conn = conn;
so the socket borrows whatever reference its caller happened to hold, and
the callers paper over that with ad-hoc holds and puts. Give the socket a
counted reference instead: __sco_chan_add() takes one and it is released
together with the channel (sco_chan_del()) and in sco_sock_destruct().
With the socket holding its own reference, sco_conn_del() no longer needs
the extra put and the redundant hold in sco_conn_ready() goes away.
Making the socket own its reference means the connection is now actually
freed on the error paths of sco_connect() where it used to leak, which in
turn runs sco_conn_free() and its hci_conn_drop(conn->hcon). To keep the
hci_conn accounting balanced, make that ownership explicit as well:
sco_conn_add() consumes one hci_conn reference and the sco_conn owns it for
its lifetime. sco_connect() hands over the reference returned by
hci_connect_sco() and no longer drops it on the error paths;
sco_connect_cfm(), which is not given a reference, takes one with
hci_conn_hold() before handing it to sco_conn_add() (and drops it again if
the allocation fails); and the explicit hci_conn_hold() in sco_conn_ready()
is removed. Every reference then has a single, clear owner.
Fixes: e6720779ae61 ("Bluetooth: SCO: Use kref to track lifetime of sco_conn")
Cc: stable@vger.kernel.org
Suggested-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Aldo Ariel Panzardo <qwe.aldo@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
If btusb_qca_send_vendor_req() gets a "short" read from a device, it
will accidentally treat that as a "real" read and populate the returned
value with some unknown and probably totally invalid data.
Fix this logic error up by calling usb_control_msg_recv() which
guarantees a "full" read happens, and then simplify the error checking
for when btusb_qca_send_vendor_req() is called.
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
If btmtk_usb_reg_read() gets a "short" read from a device, it will
accidentally treat that as a "real" read and populate the returned value
with some unknown and probably totally invalid data.
Fix this logic error up by calling usb_control_msg_recv() which
guarantees a "full" read happens, and then simplify the error checking
for when btmtk_usb_reg_read() is called (it's really just
btmtk_usb_id_get() that calls btmtk_usb_reg_read(), so fix up those
return sites.
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
If btmtk_usb_uhw_reg_read() gets a "short" read from a device, it will
accidentally treat that as a "real" read and populate the returned value
with some unknown and probably totally invalid data.
Fix this logic error up by calling usb_control_msg_recv() which
guarantees a "full" read happens, and then simplify the error checking
for when btmtk_usb_uhw_reg_read() is called.
Note, one caller of btmtk_usb_uhw_reg_read() does not check the return
value, but as we pre-initialize the return value as 0, an incorrect read
will not do anything wrong.
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
hci_conn_get() without already held reference is data race against
concurrent deletion.
In previous patches, the refcount has been changed to be taken before
starting the hci_sync task, so remove these extra get() + put() as they
are not needed.
Fixes: 12917f591cea ("Bluetooth: hci_conn: Fix null ptr deref in hci_abort_conn()")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
hci_conn_del() caller must hold hdev->lock, check the conn was not
concurrently deleted, and usually inform socket the conn is going to be
deleted.
Use hci_abort_conn_sync() instead of calling hci_conn_del() without
locks etc.
Fixes: 8e8b92ee60de5 ("Bluetooth: hci_sync: Add hci_le_create_conn_sync")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Avoids giving freed pointers to hci_conn_valid(), which kmalloc may have
reused.
Hold refcount to avoid that.
Fixes: d3413703d5f8 ("Bluetooth: ISO: Add support to bind to trigger PAST")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
There is theoretical UAF if the conn is freed while the hci_sync task is
running.
Hold refcount to avoid that.
Fixes: 6d0417e4e1cf ("Bluetooth: hci_conn: Fix not setting conn_timeout for Broadcast Receiver")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
There is theoretical UAF if the conn is freed while the hci_sync task is
running.
Hold refcount to avoid that. Handle NULL hcon, return 0 + do nothing to
match the previous behavior.
Fixes: 024421cf3992 ("Bluetooth: hci_conn: Fix not setting timeout for BIG Create Sync")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
There is theoretical UAF if the conn is freed while the hci_sync task
is running.
Hold refcount to avoid that.
Fixes: 881559af5f5c ("Bluetooth: hci_sync: Attempt to dequeue connection attempt")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
There is theoretical UAF if the conn is freed while the hci_sync task is
running.
Hold refcount to avoid that.
Fixes: 227a0cdf4a02 ("Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
btintel_diagnostics() accesses tlv->val[0] without first validating
that the diagnostics VSE is long enough to contain that field, so
may cause reading data beyond the received frame.
Fix by validating the length before access.
Fixes: af395330abed ("Bluetooth: btintel: Add Intel devcoredump support")
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
hci_conn::iso_data is accessed and modified without lock or RCU.
This leads to a race
[Task hdev->workqueue] [Task 2]
iso_recv iso_conn_put(conn)
conn = LOAD hcon->iso_data iso_conn_free(conn)
iso_conn_hold_unless_zero(conn) hcon->iso_data = NULL
kfree(conn)
kref_get_unless_zero(&conn->ref) /* UAF */
and also to races in iso_conn_add() vs. iso_conn_free().
Fix by adding spinlock hci_conn::proto_lock and using it to guard
hci_conn::iso_data.
Fixes: dc26097bdb86 ("Bluetooth: ISO: Use kref to track lifetime of iso_conn")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
iso_conn_del() and iso_chan_del() have a race that results to double-put
of iso_conn:
[Task hdev->workqueue] [Task 2]
iso_conn_del iso_chan_del
iso_conn_hold_unless_zero iso_conn_lock
iso_conn_lock conn->sk = NULL
iso_conn_unlock
sk = iso_sock_hold(conn) <---------´
if (!sk) iso_conn_put iso_conn_put
iso_conn_put /* UAF */
The extra put for !sk in iso_conn_del() is currently required since
failing iso_chan_add() may leave iso_conn not associated with any sk.
Fix by having iso_pi(sk)->conn own refcount when non-NULL, so
iso_conn_del does not need to put it. Adjust the iso_conn_add()
refcounting so that conn is put if it does not get associated with an
sk.
Fixes: dc26097bdb86 ("Bluetooth: ISO: Use kref to track lifetime of iso_conn")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
After iso_conn_del(), ISO sockets should not dereference the hcon any
more. Currently, clearing iso_conn::hcon relies on iso_conn_del()
releasing the last reference to the iso_conn.
Simplify this by explicitly clearing conn->hcon in iso_conn_del(), to
avoid more complex reasoning on races about who holds the last
reference.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
iso_sock_timeout() takes lock_sock, so sync disabling the timer while
holding that lock may deadlock.
iso_sock_timeout() may also run concurrently with iso_conn_del(), which
leads to UAF
[Task 1] [Task hdev->workqueue]
iso_sock_timeout iso_conn_del
iso_conn_hold_unless_zero iso_chan_del
`------------> iso_conn_put
caller frees hcon
iso_conn_put
iso_conn_free
conn->hcon->iso_data = NULL; /* UAF */
Fix the deadlock by removing the disable from the lock_sock sections.
Move the timer from iso_conn to iso_pinfo to decouple it from iso_conn
which may need to be freed in lock_sock section. Convert some of the
clear_timer to disable_timer.
Fixes: dc26097bdb86 ("Bluetooth: ISO: Use kref to track lifetime of iso_conn")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
iso_sock_kill() tests !sock_flag(sk, SOCK_ZAPPED) || sk->sk_socket ||
sock_flag(sk, SOCK_DEAD) for early return, but this is always true since
sock_orphan(sk) sets SOCK_DEAD, so the sk reference released by socket
always leaks, iso_sock_destruct is never called.
The socket reference also leaks when __iso_sock_close() does not set
SOCK_ZAPPED, since iso_conn_del() does not call iso_sock_kill() after
zapping.
Fix by replacing SOCK_DEAD by BT_SK_KILLED flag that is not used for
something else, and lock_sock to ensure iso_sock_kill() puts sk only
after socket release only once. Release and iso_conn_del may run
concurrently. Call iso_sock_kill() from iso_conn_del() to clean sk up
after zapping.
Remove call to iso_sock_kill() from iso_sock_close(), as it's generally
no-op there.
Fixes: ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
sk deref in iso_conn_ready must be done either under conn->lock, or
holding a refcount, to avoid concurrent close. conn->sk is currently
accessed without either:
[Task 1] [Task 2]
iso_sock_release
iso_conn_ready
sk = conn->sk
lock_sock(sk)
conn->sk = NULL
lock_sock(sk)
release_sock(sk)
iso_sock_kill(sk)
UAF on sk deref
Fix possible UAF by holding sk refcount in iso_conn_ready(). Also
recheck after lock_sock that the socket is still valid. Adjust locking
so conn->sk is cleared only under lock_sock.
Fixes: 27c24fda62b60 ("Bluetooth: switch to lock_sock in SCO")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
iso_sock_rebind_bis() updates socket iso_pi(sk)->bc_num_bis before
validating the BIS values, so it's possible to end up with bc_num_bis
inconsistent.
Assign to iso_pi(sk)->bc_num_bis only after validation.
Fixes: 80837140c1f2 ("Bluetooth: ISO: Allow binding a PA sync socket")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
In iso.c check_bcast_qos(), missing bcast.timeout is not set to its
default value, and appears typoed as bcast.sync_timeout.
Fix the typo.
Fixes: b37cab587aa3 ("Bluetooth: ISO: Don't reject BT_ISO_QOS if parameters are unset")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Accessing iso_pi(sk)->conn requires lock_sock, which is not taken in the
"ev3" part of iso_connect_ind. It may also be NULL if socket has
transitioned away from the LISTEN/CONNECT states before locking.
Fix by adding lock/release. Recheck hcon is valid after lock acquire
where needed.
Fixes: 168d9bf9c7f0 ("Bluetooth: ISO: Reassemble PA data for bcast sink")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Accessing iso_pi(sk)->conn requires lock_sock, which is not held here.
Fix by adding the lock/release.
Fixes: 2df108c227b2 ("Bluetooth: ISO: Fix using BT_SK_PA_SYNC to detect BIS sockets")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Commit d57e506f6a1e ("Bluetooth: ISO: clear iso_data always when detaching conn from hcon")
merged a version of the UAF fix that breaks releasing connected
ISO sockets. Since hci_conn::iso_data is set to NULL, iso_chan_del() won't
be called when the hci_conn disconnects, and the ISO socket does not emit
POLLHUP correctly.
Fix by retaining full hci_conn <-> iso_conn association while in
BT_DISCONNECT state, so that local disconnect via shutdown() follows
similar ISO socket code path as remote disconnect. Use a separate flag
to track whether hci_conn_drop() is needed, instead of setting
iso_conn::hcon = NULL
In iso_sock_ready(), disallow disconnecting socket going BT_CONNECTED,
in case hcon connects while its drop is pending.
Fixes: d57e506f6a1e ("Bluetooth: ISO: clear iso_data always when detaching conn from hcon")
Fixes: fbdc4bc47268 ("Bluetooth: ISO: Use defer setup to separate PA sync and BIG sync")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The BUG_ON(axp->pid_count >= AUDIT_AUX_PIDS) check in
audit_signal_info_syscall() will panic the kernel if the signal target
pid array overflows, which is too severe for this situation.
Replace it with a WARN_ON_ONCE() and return of -EINVAL, instead.
Signed-off-by: Ricardo Robaina <rrobaina@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The BUG_ON(!mutex_is_locked(&audit_filter_mutex)) check in
audit_add_to_parent() will panic the kernel if the mutex is not held,
which is too severe for this situation.
Replace it with lockdep_assert_held(), instead.
Signed-off-by: Ricardo Robaina <rrobaina@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
When the PLL rates table was first committed for RK3588 (and later reused
for RK3576), the fractional PLL coefficient was defined as an unsigned
value, while the TRM clearly states that it is a two's complement 16-bit
value.
Treating the fractional PLL coefficient as unsigned in rate recalculation
results in a kernel-visible rate which deviates from what the hardware
actually generates by Fin / (p * 2^s), or 2 MHz for the two affected table
entries.
Rockchip's downstream kernel later revised the fractional PLL code [1] to
account for the two's complement nature of the coefficient, but that
change wasn't upstreamed.
Change the PLL table definition to use two's complement for the
fractional coefficient and update its users accordingly.
Note that a negative fractional coefficient is meant to be subtracted from
the next larger integer multiplier, so the m values in the table are
also adjusted accordingly for the two negative-k entries.
Rockchip's downstream commit introducing the two's complement logic for k
also does unrelated tweaks to the PLL parameters which are not explained
by the switch to the two's complement, so they are not replicated here.
If any of the parameters prove to need further tweaks (e.g. for precision
or jitter) that would better be done in targeted follow-up commits.
Fractional PLL rates don't seem to be used by any current mainline
consumers, so this is purely a correctness fix. It will also be important
to properly support DisplayPort output going forward, as the video output
controller derives its pixel clock from system PLLs with no dedicated PHY
PLL option for DP unlike HDMI, and some display modes are only achievable
using fractional PLL rates.
Link: https://github.com/flipperdevices/rockchip-linux/commit/7a72bc05dcc3a51e85ae531749e6270bf9b9212d [1]
Fixes: f1c506d152ff ("clk: rockchip: add clock controller for the RK3588")
Fixes: cc40f5baa91b ("clk: rockchip: Add clock controller for the RK3576")
Signed-off-by: Alexey Charkov <alchark@flipper.net>
Link: https://patch.msgid.link/20260723-rk3588-fracpll-v2-2-3adfb9dda235@flipper.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
According to the TRM, the fractional PLL coefficient should be divided by
65536 rather than 65535 to obtain the output rate.
Fix the denominator and add a comment with the TRM provided clock formulae
for future reference.
See RK3576 TRM Part 1 V1.2 section 2.13.1.4 Setting Guide on P, M, S and K
or equivalently RK3588 TRM part 1 V1.0 section 2.17.1.4 Setting Guide on P,
M, S and K.
Fractional PLL rates don't seem to be used by any current mainline
consumers, so this is purely a correctness fix. It will also be important
to properly support DisplayPort output going forward, as the video output
controller derives its pixel clock from system PLLs with no dedicated PHY
PLL option for DP unlike HDMI, and some display modes are only achievable
with fractional PLL rates.
Fixes: 8f6594494b1c ("clk: rockchip: add pll type for RK3588")
Signed-off-by: Alexey Charkov <alchark@flipper.net>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://patch.msgid.link/20260723-rk3588-fracpll-v2-1-3adfb9dda235@flipper.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
Alex Deucher
Gabe Teeger
Bob Zhou
Chris Morgan
Praveen Talari
Pengpeng Hou
Wenmeng Liu
Liem
Yang Xiuwei
Pan Chuang
Myeonghun Pak
Sean Christopherson
Linus Torvalds
Jonas Gorski
Aldo Ariel Panzardo
Greg Kroah-Hartman
Pauli Virtanen
Zijun Hu
Ricardo Robaina
Alexey Charkov