| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
- HID++ 2.0 repogrammable button support (Elliot Douglas)
- Bolt receiver support for HID++ devices (Erik Håkansson)
|
|
- support for MSI Claw (Derek J. Clark)
|
|
- assorted fixes (Alexandre Derumier, Christos Maragkos, Jiangshan Yi)
|
|
- memory management fix on device cleanup path (Xu Rao)
- profile index handling fix (Michael Bommarito)
|
|
- small fixes and code improvements (e.g. devm_kasprintf() conversion,
using guard() and scoped_guart(), etc) (Doruk Tan Ozturk,
Rosalie Wanders)
|
|
- initial support for 2026 Steam Controller (Vicki Pfau)
- support for sensor events on the 2025 Steam Controller (Vicki Pfau)
- assorted fixes, improvements and code refactoring (Vicki Pfau)
|
|
- support for MSI Raider A18 HX A9WJG RGB (David Glushkov)
- Improvements and fixes for various Arctis devices support (Sriman Achanta)
|
|
- report data handling optimization (Ruoyu Wang)
|
|
Pull ARM SoC platform updates from Arnd Bergmann:
"The 32-bit Arm platforms are a bit more interesting this time: I
refreshed an earlier series to mark code as deprecated that does have
the tendency of getting in the way of cleanups and new features but
has close to zero users. Among these are:
- 22 of the remaining 28 legacy board files that predate the current
devicetree based descriptions, using old chips from Intel and
Marvell. The remaining six board files are for TI OMAP1 and Samsung
s3c64xx chips and all still have known users.
- support for Cortex-M3/M4/M7 and ARM1136r0 CPU cores and the 25
machines based on these. These all use devicetree but the CPU
support causes disproportional work. Most of them are just
reference boards, the notable exceptions being the Nokia N800/N810
tablet and the Buglabs BUG platform.
- be8, be32, oabi and iwmmxt userspace binaries, which were mostly
associated with the platforms now scheduled for removal and are
increasingly problematic to support with modern toolchains.
Nothing is actually removed at this point, to ensure that any
remaining users continue to have the 7.3-LTS for a while longer.
Patches for removal are currently being tested.
Other updates include a continued work to convert GPIO number based
interfaces to descriptors, a patch to restore little-endian mode on
the one Arm platform (ixp4xx) that only worked in big-endian mode
recently, and some minor cleanups and bugfixes"
* tag 'soc-arm-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (41 commits)
MAINTAINERS: Drop redundant lists from various Samsung entries
ARM: tegra: Replace __ASSEMBLY__ with __ASSEMBLER__
ARM: tegra: Fix OF node reference leaks in IRQ init
ARM: lpc32xx: remove a few manually populated OF devices
ARM: lpc32xx: only run SoC init on LPC32xx hardware
firmware: imx: scu: manage mailbox channels and global handle
ARM: sa1100: h3xxx: convert gpio-keys to use software nodes
ARM: sa1100: collie: convert gpio-keys to use software nodes
ARM: sa1100: assabet: convert gpio-keys to use software nodes
gpio: sa1100: register software node for GPIO controller
ARM: ixp4xx: Relax endianness
ARM: replace linux/gpio.h inclusions
soc: imx9: devm_kasprintf error handling
ARM: mark mv78xx0 support as deprecated
ARM: mark axxia platform as deprecated
ARM: mark Cortex-M3/M4/M7 based boards as deprecated
ARM: mark footbridge as deprecated
ARM: mark RiscPC as deprecated
ARM: mark mach-sa1100 as deprecated
ARM: orion5x: mark all board files as deprecated
...
|
|
Pull SoC defconfig updates from Arnd Bergmann:
"Just the usual updates to the main defconfig files as well as the
omap2 specific one, to enable more loadable modules for better default
hardware support"
* tag 'soc-defconfig-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
riscv: defconfig: thead: enable PCA953X GPIO driver
arm64: defconfig: Enable drivers for BeagleBadge
arm64: defconfig: Enable Qualcomm BAM-DMUX WWAN driver
arm64: defconfig: Enable Sound DMIC driver
arm: omap2plus_defconfig: Enable multi-LED
arm64: defconfig: Enable Qualcomm reference device EC driver
ARM: omap2plus_defconfig: enable things required by iwd
arm: multi_v7_defconfig: Enable BRIDGE and DP83848_PHY for TI AM57xx, AM437x and AM335x
arm64: defconfig: Enable Allwinner LRADC input driver
|
|
Pull SoC driver updates from Arnd Bergmann:
"The SoC driver changes once more consist of many small fixes and
cleanups, that are to a large part the result of automated testing.
On platform specific drivers, this includes SoC specific code for
xilinx, freescale/nxp, qualcomm, TI, aspeed, omap, tegra, samsung,
rockchip, renesas, ixp4xx. In firmware drivers, we see a similar
picture for SCMI and qcomtee.
Aside from these, we see actual new hardware support in a few areas:
- The Apple platform gets a new driver for low power states
- Updates to Qualcomm platform drivers add several new hardware
specific features and additional SoCs.
- Amlogic SoC support for A1 and T7 is added
- The Mediatek MMSYS driver is refactored as a cleanup"
* tag 'soc-drivers-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (157 commits)
soc: qcom: make QCOM_PDR_MSG selectable
soc: qcom: ubwc: Fix missing include
soc: qcom: ubwc: Fix link error when QCOM_SMEM=n
media: iris: Guard the QCOM_UBWC_CONFIG select with QCOM_SMEM
drm/msm: Guard the QCOM_UBWC_CONFIG select with QCOM_SMEM
dt-bindings: arm: qcom,ids: Add SoC ID for Snapdragon SDM 850
firmware: xilinx: Clear firmware notifiers across kexec transitions
firmware: xilinx: Release all peripheral devices from firmware
firmware: xilinx: Add support to clear EL3 PM state
firmware: xilinx: Propagate actual error from feature check
firmware: xilinx: Use TF-A feature check for TF-A-specific APIs
bus: fsl-mc: drop unused assignment of acpi_device_id::driver_data
soc: fsl: qe: check platform_driver_register() in qe_ic_of_init()
phy: lynx-10g: use RCW override procedure for dynamic protocol change
soc: fsl: guts: implement the RCW override procedure
dt-bindings: fsl: layerscape-dcfg: define DCFG_DCSR region
soc: fsl: guts: make fsl_soc_data available after fsl_guts_init()
soc: fsl: guts: make it easier to determine on which SoC we are running
soc: fsl: guts: add a central fsl_guts_read() function
soc: fsl: guts: add a global structure to hold state
...
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"There are two new mystery SoCs with very little public information
about them so far, Qualcomm's Cortex-A78C based "Shikra" and Altera's
Cortex-A720 based Agilex72 SOCFPGA.
We have also gained support for a couple of SoCs from the 2023/2024
timeframe that have been in the making for a while:
- The Apple platform gains support for M3 Pro, Max and Ultra SoC,
following the basic M3 support from 7.2.
- Samsung Exynos 1580 is a high-end mobile phone SoC from 2024
- Canaan K230 is a RISC-V based 64-bit AI SoC, based on the earlier
K210 chip
- Sophgo SG2000 is a mixed Arm/RISC-V chip that was already supported
using the Arm core but is now also added for RISC-V along with
several other variants of the cv18xx series
In terms of newly added machines we have reference platforms for all
the chips above, plus
- Only four 32-bit Arm boards: two older phones and two older
industrial/embedded boards; using Allwinner, Qualcomm and Rockchip
SoCs
- Three laptops und three phones using Qualcomm SoCs
- Ten 64-bit Rockchips based single-board computers, along with one
NAS box and a game console.
- Seven industrial/embedded boards and modules using NXP i.MX8/9
SoCs.
- A Lenovo desktop box based on NVIDIA Jetson Xavier NX
- A few more single-board computers based on Allwinnner A133,
Spacemit K1 and TI AM62.
As usual, there is a constant stream of minor cleanups and fixes
towards addressing the 'dt-check-style --mode strict' warnings, and
everyone is expected to address those warnings for new submissions
now"
* tag 'soc-dt-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (864 commits)
Revert "riscv: dts: spacemit: k3: add i2s0-i2s5 nodes"
Documentation/process: maintainer-soc: Mention expectation about dt-check-style
ARM: dts: helios4: add SATA regulator supplies
ARM: dts: helios4: add vcc-supply to GPIO expander
ARM: dts: helios4: add vcc-supply to EEPROM
arm64: dts: turris-mox: fix usb3 phys
arm64: dts: ti: Correct white-space style
arm64: dts: ti: k3-am64: Fix MDIO clock reference for ICSSG0 node
arm64: dts: qcom: talos-evk: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: sa8155p-adp: Fix swapped USB and UFS QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: eliza-mtp: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: lemans: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: glymur: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: kaanapali: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: sar2130p: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: sm8750: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: sm8650: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: purwa: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: hamoa: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: sc8180x: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
...
|
|
Pull alpha updates from Magnus Lindholm:
"This contains two fixes for Alpha floating-point exception handling,
two clang-related fixes, the preparatory changes from the
generic-entry series, an interrupt-entry lockdep fix, two Marvel/EV7
IRQ fixes, an RTC fix, and one header cleanup.
The generic-entry preparation adds regset-based ptrace and core dumps,
ARCH_STACKWALK and lockdep hardirq-state tracking. These changes are
useful independently and enable previously missing debugging
facilities on Alpha.
The final patch switching Alpha to GENERIC_ENTRY is intentionally not
included in this pull request. I am deferring that change to allow
further testing and to reduce the risk of conflicts with ongoing
entry-path work elsewhere in the kernel"
* tag 'alpha-for-v7.3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/lindholm/alpha:
alpha: read $gp and $sp explicitly for clang
alpha: pass -Wa,-mev6 only when using GNU as
alpha: annotate hardirqs-off on IPL 7 interrupt entry
alpha: run the remote RTC access in a worker, not an IPI callback
alpha: don't leak hardware-fabricated FP exception bits to user space
alpha: fix ieee_swcr_to_fpcr setting FPCR_DNOD unconditionally
alpha: enable lockdep hardirq state tracking
alpha: use raw spinlocks for low-level platform locks
alpha: provide ftrace return address support for lockdep
alpha: make irqflags helpers operate on IPL state
alpha: add ARCH_STACKWALK-based stacktrace support
alpha: enable regset-based ptrace and core dumps
alpha: marvel: Fix lock ordering in init_io7_irqs()
alpha: marvel: Fix irq_set_status_flags to use correct IRQ number
alpha: remove unnecessary architecture-specific <asm/device.h>
|
|
Pull csky update from Guo Ren:
- Fix a4/a5 restoration in syscall trace path
* tag 'csky-for-linus-7.3' of https://github.com/c-sky/csky-linux:
csky: Fix a4/a5 restoration in syscall trace path
|
|
Pull x86 cpuid updates from Borislav Petkov:
- Get rid of static_cpu_has() - one less API to care about testing CPU
features
- Unify the handling of CPU core types (performance, efficient, etc) by
mapping the vendor-specific types to Linux ones
- Continuation of the work of Ahmed Darwish to centralize CPUID leaf
representation
* tag 'x86_cpu_for_v7.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU: Rename struct cpuid_read_output to struct cpuid_output
x86/cpu/scattered: Sort it properly
x86/cpu: Use parsed CPUID(0x1)
x86/lib: Add CPUID(0x1) family and model calculation
x86/cpu: Use parsed CPUID(0x0)
x86/cpu/transmeta: Rescan CPUID(0x1) after modifying capabilities
x86/topology: Add TOPO_CPU_TYPE_LOW_POWER
x86/topology: Name the AMD core-type values
x86/topo: Map vendor CPU types to generic Linux such types
x86/bugs: Don't use cpu-type matching in cpu_vuln_blacklist
x86/cpu: Hide and rename static_cpu_has()
|
|
Pull x86 cleanups from Borislav Petkov:
- The usual pile of smallish cleanups and fixlets all over the place
* tag 'x86_cleanups_for_v7.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Remove unnecessary __maybe_unused annotations
x86/msr: Document the I/O-like write semantics in the msr driver
x86/apic: Ensure ICR register write value is handled as 32 bits
x86/boot/compressed/head_64.S: Clean up SEV-related comments
Documentation/arch/x86/amd-memory-encryption.rst: Fix typo
x86/platform/quark: Fix kernel-doc warnings in imr.c
x86/ras: Move contents from arch/x86/ras/Kconfig into drivers/ras/Kconfig
x86/cpu: Move intel_get_platform_id() to cpu/intel.c
x86/mm: Fix typo in comment
x86/fpu: Fix kernel-doc formatting above fpu_enable_guest_xfd_features()
x86/cfi: Use symmetric SYM_START and SYM_END in __CFI_TYPE()
x86/cfi: Add __init_or_module annotations for fineibt
|
|
Pull x86 resource control updates from Borislav Petkov:
- How refreshing: no new features but a whole pile of fixes to more or
less serious issues reported by Sashiko along with miscellaneous
cleanups all over the place. All except one by Reinette Chatre, the
one by Tony Luck.
* tag 'x86_cache_for_v7.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
fs/resctrl: Inform user space when status buffer overflowed
fs/resctrl: Communicate resource group deleted error via last_cmd_status
fs/resctrl: Add last_cmd_status support for writes to max_threshold_occupancy
fs/resctrl: Change last_cmd_status custom during input parsing
fs/resctrl: Use accurate and symmetric exit flows
fs/resctrl: Pass error reading event through to user space
fs/resctrl: Use accurate type for rdt_resource::rid
fs/resctrl: Change pattern used to track number of entries in enum resctrl_conf_type
x86/resctrl: Protect against bad shift
fs/resctrl: Use correct format specifier for printing error pointers
fs/resctrl: Fix UAF from worker threads when domains are removed
x86/resctrl: Ensure domain fully initialized before placed on RCU list
fs/resctrl: Prevent deadlock and use-after-free in info file handlers
fs/resctrl: Prevent use-after-free in rdtgroup_kn_put()
fs/resctrl: Fix deadlock on errors during mount
fs/resctrl: Move functions to avoid forward references in subsequent fixes
x86,fs/resctrl: Document safe RCU list traversal
|
|
Pull x86 alternatives update from Borislav Petkov:
- Remove the smp_locks alternatives machinery which was used to patch
out lock prefixes when running a SMP kernel on a uniprocessor machine
* tag 'x86_alternatives_for_v7.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternative: Drop smp_locks glue
|
|
Pull x86 MCE update from Borislav Petkov:
- Add mce=print_all to the mce= kernel cmdline params documentation
* tag 'ras_core_for_v7.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Document the mce=print_all command line parameter
|
|
Pull x86 mm updates from Dave Hansen:
"There are two things in here of note. First, there are fixes to reduce
the time that the TLB flushing code sits around with interrupts
disabled. It should be well tested, but it's certainly something to
keep an eye on.
Second is a little back-and-forth in the interactions between the
set_memory*() locking and DEBUG_PAGEALLOC. There was a slightly
painful re-discovery of why DEBUG_PAGEALLOC has special locking rules,
but the code did end up better for it.
Summary:
- Fix pkey_alloc() return value when pkeys are not supported
- Allow preemption during IPI completion waiting to improve wakeup
latency
- Convert more x86 page table code to ptdescs
- Fixes and cleanups for set_memory*() locking, mostly around large
pages"
* tag 'x86_mm_for_7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pkeys: Fix pkey_alloc() return value when pkeys are not supported
x86/mm: Fix and document DEBUG_PAGEALLOC
x86/mm: Use guard() for pgd_lock
x86/mm: Use guard() in cpa_collapse_large_pages()
x86/mm: Re-enable preemption before flush_tlb_multi()
x86/kvm: Disable preemption in kvm_flush_tlb_multi()
x86/mm: Move flush_tlb_info back to the stack
x86/mm: Cap flush_tlb_info alignment at 64 bytes
x86/mm: Factor out flush_tlb_info initialization
x86/mm/pat: Take cpa_lock around large-page collapse
x86/mm/pat: Don't gate cpa_lock on debug_pagealloc_enabled()
x86/xen: Convert xen_mm_unpin_all() to ptdescs
x86/xen: Convert xen_mm_pin_all() to ptdescs
x86/mm: Convert pgd_page_get_mm() to ptdescs
x86/mm: Convert sync_global_pgds_l4() to ptdescs
x86/mm: Convert sync_global_pgds_l5() to ptdescs
x86/mm: Convert arch_sync_kernel_mappings() to ptdescs
x86/mm/pat: Convert collapse_pmd_page() to ptdescs
x86/mm/pat: Convert __set_pmd_pte() to ptdescs
x86/mm/pat: Use IS_ENABLED() instead of ifdef
|
|
Pull x86 TDX updates from Dave Hansen:
"TDX guests cause #VE exceptions whenever they do port I/O. The guest
then does some instruction decoding and makes a call up to the host
for help. That decoding had a couple of bugs.
Fix those bugs. Use an existing and now shared KVM helper for one of
them"
* tag 'x86_tdx_for_7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tdx: Fix zero-extension for 32-bit port I/O
x86/insn-eval: Move assign_register() out of KVM as insn_assign_reg()
x86/tdx: Fix off-by-one in port I/O handling
|
|
Pull misc x86 updates from Dave Hansen:
"Just adding some documentation and removing a super stale comment
about an LED driver that was moved long ago:
- Document the intricacies of GS context switching
- Remove old TODO message about Geode LED driver"
* tag 'x86_misc_for_7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/platform/geode: Remove old TODO message about leds-net5501.c
Documentation/x86: Document the intricacies of GS context switching
|
|
Pull x86 entry update from Dave Hansen:
"Fix frame pointer unwinder when it encounters FRED stack frames"
* tag 'x86_entry_for_7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry/fred: Encode frame pointer on entry
|
|
Pull VDSO updates from Thomas Gleixner:
- Consolidate the VDSO datastore further and provide support for
mlock_all() and prefaulting.
- Provide 32-bit legacy time related functionality only if
CONFIG_COMPAT_32BIT_TIME is enabled. The config switch exists,
but architecture code still exposes the legacy functionality even
disabled.
Clean this up by adding the missing guards and validating at build
time that the VDSO is legacy free if disabled.
- Consolidate the VDSO related config options in core and drivers,
which removes some non-sensical dependencies and quite an amount of
#ifdeffery.
- Clean up the PAGE_SIZE definition maze
* tag 'timers-vdso-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
random: vDSO: Drop custom PAGE_SIZE definitions
LoongArch: Remove CONFIG_GENERIC_GETTIMEOFDAY ifdeffery
clocksource/drivers/timer-riscv: Remove CONFIG_GENERIC_GETTIMEOFDAY ifdeffery
clocksource/drivers/arm_arch_timer: Remove CONFIG_GENERIC_GETTIMEOFDAY ifdeffery
clocksource/drivers/mips-gic-timer: Remove CONFIG_GENERIC_GETTIMEOFDAY ifdeffery
MIPS: csrc-r4k: Remove CONFIG_GENERIC_GETTIMEOFDAY ifdeffery
vDSO: Make clockmode constants available without CONFIG_GENERIC_GETTIMEOFDAY
kbuild: Support generated asm-headers in subdirectories
vdso: Rename HAVE_GENERIC_VDSO to VDSO_DATASTORE
vdso: Drop HAVE_GENERIC_VDSO from architecture kconfig files
vdso: Automatically select HAVE_GENERIC_VDSO if necessary
MIPS: vdso: Stop using CONFIG_HAVE_GENERIC_VDSO
vdso: Remove the dependency on HAVE_GENERIC_VDSO from ARCH_HAS_VDSO_ARCH_DATA
futex: Remove dependency on HAVE_GENERIC_VDSO from FUTEX_ROBUST_UNLOCK
vdso/gettimeofday: Verify COMPAT_32BIT_TIME interactions
sparc: vdso: Respect COMPAT_32BIT_TIME
MIPS: VDSO: Respect COMPAT_32BIT_TIME
powerpc/vdso: Respect COMPAT_32BIT_TIME
ARM: VDSO: Respect COMPAT_32BIT_TIME
arm64: vdso32: Respect COMPAT_32BIT_TIME
...
|
|
Pull timer and timekeeping core updates from Thomas Gleixner:
- Fix a subtly inconsistency in the timekeeping code, which fails to
account for the monotonicity adjustment in ntp_error.
For small changes of the clocksource multiplicator (+/-1) which are
typically used by the NTP PLL this is hard to observe. But for larger
adjustments, e.g. caused by a direct frequency setting through
adjtimex() the one-time uncompensated offset is significant.
Cure this by adjusting ntp_error with the resulting offset so that
the discrepancy is smoothed away over time
- Make tick length calculations correct in NTP.
The timekeeping core takes the quantisation of the clocksource into
account when calculating the tick length to compensate for the
deviation of the nominal NTP_INTERVAL_LENGTH.
While timekeeping gets this right, NTP is not aware of that, which
means it operates on the nominal value and not on the actual value
which is determined by the clock source frequency. The rounding of a
coarse clocksource like the ACPI PM timer results in a +127 PPM
deviation.
Cure this by exposing the deviation to the NTP code so that it can
operate on the same data as the timekeeping core. This is purely
kernel internal. User space still sees the nominal tick lenght via
adjtimex().
- The accuracy of the NTP adjustments is fairly approximate as the code
assumes that the invocations are precisely in NTP interval frequency
ticks and the final adjustment can over and under-run.
Cure this by adjusting ntp_error by the intended skew on each tick to
achieve the desired rate.
- Handle the two competing skews of time offset and time adjustment
correctly by calculating the conflict portion between the skews and
adjusting both accordingly.
- A set of updates and improvements for the selftests
- The usual small fixes and improvements all over the place
* tag 'timers-core-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits)
selftests: timers: nsleep-lat: Check all calls to clock_nanosleep() and clock_gettime()
selftests: timers: nsleep-lat: Reuse kselftest error numbers
selftests: timers: nsleep-lat: Explicitly list the tested clocks
selftests: timers: nsleep-lat: Use NSEC_PER_MSEC define for unreasonable latency
selftests: timers: nanosleep: Report each test separately
selftests: timers: nanosleep: Explicitly handle timer_delete() failure
selftests: timers: nanosleep: Move all single clock tests out of the loop in main()
selftests: timers: nanosleep: Reuse kselftest error numbers
selftests: timers: nanosleep: Explicitly list the tested clocks
selftests: timers: nanosleep: Drop output alignment
selftests: timers: Use clock_name() and constants from clock-helpers.h
selftests: Add clock-helpers.h
timer_list: Use ktime_t over nanoseconds
timer_list: Use standard 'long long' format placeholders
hrtimer: Add a lockdep assertion to hrtimer_update_base()
timekeeping: Use u32 for clock_was_set_seq
timekeeping: Rename clockid_aux_valid() to clockid_is_aux_clock()
hrtimer: Account nr_retries on recovered interrupt retries
timers/itimer: Zero-init old itimerval before copy to userspace
nohz: Replace dead select with choice default
...
|
|
Pull clocksource/event driver updates from Thomas Gleixner:
- Remove redundant dev_err() and dev_err_probe() invocations in various
drivers
- Handle SWAP_IO_SPACE correctly in the rtl-otto driver
- Make the Samsumg PWM timer driver PREEMPT_RT compatible
- Ensure that the SUN4I timer is programmed with a delta larger than
zero as a zero delta causes the the timer to be disabled
- The usual fixes and improvements all over the place
* tag 'timers-clocksource-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/armada: Unwind timer clock on init failure
clocksource/drivers/rtl-otto: Change driver to use __raw reads and writes
clocksource/drivers/samsung_pwm: Switch to raw_spinlock_t type
clocksource/drivers/clps711x: Do not unmap clocksource MMIO
clocksource/drivers/nxp-pit: Fix IRQ leak on cpuhp_setup_state error path
clocksource/drivers/timer-sun4i: Advertise a real minimum delta
clocksource: Remove redundant dev_err()/dev_err_probe()
clocksource/drivers/sh_cmt: Use named initializers for platform_device_id arrays
clocksource/drivers/sh_mtu2: Drop unused assignment of platform_device_id
|
|
Fix IWYU issues:
/tmp/next/build/include/linux/io_uring_types.h:56:32: error: 'ITER_DEST'
undeclared here (not in a function)
56 | IO_BUF_DEST = 1 << ITER_DEST,
| ^~~~~~~~~
/tmp/next/build/include/linux/io_uring_types.h:57:32: error: 'ITER_SOURCE'
undeclared here (not in a function)
57 | IO_BUF_SOURCE = 1 << ITER_SOURCE,
| ^~~~~~~~~~~
Fixes: 95961b72c57b2 ("io_uring/rsrc: rename and export IO_IMU_DEST / IO_IMU_SOURCE")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20260818184134.384991-1-broonie@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull treewide timer related cleanups from Thomas Gleixner:
- Remove the leftover CLOCK_TICK_RATE which has been scheduled for
removal more than a decade ago along with some now empty asm/timex.h
files.
- Consolidate delay timer calibration
The construct of having a define in a header requires that
architectures provided asm/timex.h for no reason. Also the function
name for reading the delay timer is confusing at best.
Use a config switch to enable that functionality and rename the
function to delay_read_timer() to make the purpose clear.
This removes some more now empty asm/timex.h files as well.
* tag 'timers-cleanups-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
calibrate: Rework delay timer calibration
treewide: Remove CLOCK_TICK_RATE
x86: Use PIT_TICK_RATE instead of CLOCK_TICK_RATE
|
|
Per PCIe r7.0 sec 6.2.4.3, certain Non-Fatal Errors may be signaled using
ERR_COR instead of ERR_NONFATAL. These "Advisory Non-Fatal Errors" are
listed in sec 6.2.7 and explained in detail in sec 6.2.3.2.4.
Advisory Non-Fatal Errors set bits in the Uncorrectable Error Status
Register as well as one bit in the Correctable Error Status Register
(Advisory Non-Fatal Error Status, bit 13). The latter is masked by
default, hence these errors are currently not signaled at all (except on
non-compliant products which choose to unmask the bit).
Unmask Advisory Non-Fatal Errors on device enumeration.
Some Non-Fatal Errors are always Advisory, others may be Advisory at the
discretion of the detecting agent. If multiple errors occur, the agent
may qualify a portion as non-Advisory and signal ERR_NONFATAL in addition
to ERR_COR. In this case, there's no way to determine which Non-Fatal
Error was Advisory. Assume none is to ensure that the Uncorrectable Error
code path is taken to recover from the errors.
Introduce aer_compute_anfe_status() to compute Advisory Non-Fatal Error
bits from AER registers, based on this policy. Use it for Firmware First
error handling in pci_print_aer(), which receives an AER register dump
from the platform (UEFI r2.11 sec N.2.7).
Introduce aer_get_anfe_status() to read AER registers from a device and
feed them to aer_compute_anfe_status(). Use it for native error handling
in aer_get_device_error_info(), which gathers registers from the device
and caches the computed Advisory Non-Fatal Error bits in a new anfe_status
field in struct aer_err_info.
Regardless whether error handling is native or Firmware First, the AER
driver needs to increment error counters, signal a trace event and log
each error. When Advisory Non-Fatal Errors occur, these steps must be
performed for Correctable Errors and for Uncorrectable Errors. Achieve
this through a recursive invocation of aer_print_error() (for native error
handling) and pci_print_aer() (for Firmware First error handling). The
recursive invocation reports the (Advisory) Uncorrectable Errors after
reporting the Correctable Errors.
Note that the First Error Pointer and TLP Prefix Log is only meaningful
for Uncorrectable Errors, but when Advisory Non-Fatal Errors occur,
aer_get_device_error_info() has to populate the first_error and
tlp_header_valid fields in struct aer_err_info for a Correctable Error.
Avoid incorrectly logging those fields for Correctable Errors by amending
__aer_print_error() and aer_print_error() with conditionals.
Sample log output for an Advisory Unsupported Request Error:
pcieport 0001:00:00.4: AER: Multiple Correctable Error messages received, first one from 0001:0e:00.0
idxd 0001:0e:00.0: PCIe Bus Error: severity=Correctable
idxd 0001:0e:00.0: device [8086:1216] error status/mask=00002000/00000000
idxd 0001:0e:00.0: [13] NonFatalErr | |
idxd 0001:0e:00.0: PCIe Bus Error: severity=Uncorrectable (Non-Fatal)
idxd 0001:0e:00.0: device [8086:1216] error status/mask=00100000/00000000
idxd 0001:0e:00.0: [20] UnsupReq | Receiver | Transaction Layer (First)
idxd 0001:0e:00.0: AER: TLP Header (Flit): 0x01000104 0x00000000 0x0000080e 0x0f800001
This commit takes inspiration (but differs significantly) from an earlier
submission by Zhenzhong Duan, which in turn was based on a submission by
Qingshun Wang:
https://lore.kernel.org/r/20240620025857.206647-1-zhenzhong.duan@intel.com/
Prior attempts at supporting Advisory Non-Fatal Errors were submitted by
Yicong Yang and Dio Sun:
https://lore.kernel.org/r/1614689994-10925-1-git-send-email-yangyicong@hisilicon.com/
https://lore.kernel.org/r/BJXPR01MB0614C01A9523786117B1F1CBCEC8A@BJXPR01MB0614.CHNPR01.prod.partner.outlook.cn/
Signed-off-by: Lukas Wunner <lukas@wunner.de>
[bhelgaas: fold in https://lore.kernel.org/all/amdnMg_J6T3Sys45@wunner.de,
https://lore.kernel.org/all/120da0565eac0157ffd913423c7cfa66e985ff59.1786800931.git.lukas@wunner.de]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20240620025857.206647-1-zhenzhong.duan@intel.com/
Link: https://lore.kernel.org/r/1614689994-10925-1-git-send-email-yangyicong@hisilicon.com/
Link: https://lore.kernel.org/r/BJXPR01MB0614C01A9523786117B1F1CBCEC8A@BJXPR01MB0614.CHNPR01.prod.partner.outlook.cn/
Link: https://patch.msgid.link/1b62915ffe06ee5b08e846531c42392e5f244337.1784905909.git.lukas@wunner.de
|
|
Pull SMP core updates from Thomas Gleixner:
- Reduce the preemption disabled sections in smp_call_function*().
The various smp call functions keep preemption disabled accross the
full operation which includes the wait for completion. Especially the
latter can take some time when one of the target CPUs is not
immediately responding to the IPI, which can result in large latency
spikes.
To improve this provide a per task CPU mask to track the CPUs to wait
for. That makes the information required for the wait task local and
therefore allows to reenable preemption before the wait.
While this comes with moderate extra memory cost this reduces SMP
function call induced latency measured in a fleet for high priority
tasks from ~17ms to ~1.5ms (~90%).
- Reduce the overhead of the CSD debug code by replacing the heavy
memory barriers with smp_store_release()/acquire()
- Remove obsolute unused hotplug states
* tag 'smp-core-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
scftorture: Remove preempt_disable() in scftorture_invoke_one()
smp: Remove preempt_disable() from on_each_cpu_cond_mask()
smp: Remove preempt_disable() from smp_call_function()
smp: Enable preemption early in smp_call_function_many_cond()
smp: Alloc percpu csd data in smpcfd_prepare_cpu() only once
smp: Use task-local IPI cpumask in smp_call_function_many_cond()
smp: Refactor remote CPU selection in smp_call_function_any()
smp: Enable preemption early in smp_call_function_single()
smp: Disable preemption explicitly in __csd_lock_wait()
cpu/hotplug: Remove CPUHP_AP_ARM_CORESIGHT_CTI_STARTING
smp: Use release stores for csd_lock_record() state
|
|
Pull futex updates from Thomas Gleixner:
- Improvements to various futex self tests:
- Conversion to the selftest harness
- Provide and use thread creation and synchronization helpers to
reduce the dependency on delays, which tend to fail on loaded test
systems
- New tests for validating owner exit scenarios for robust and PI
futexes
- Runtime detect supported features and skip the tests if the kernel
has no support
- A few minor fixes
* tag 'locking-futex-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/futex: Give circular-list nodes static storage
selftests/futex: Use thread synchronization helpers instead of usleep()
selftests/futex: Provide thread creation and synchronization helpers
selftests/futex: Dynamically skip unsupported tests
selftests/futex: Add FUTEX_LOCK_PI owner-exiting coverage
selftests/futex: Migrate robust_list to harness
selftests/futex: Migrate futex_priv_hash to harness
selftests/futex: Migrate futex_numa_mpol to harness
selftests/futex: Migrate futex_requeue_pi_signal_restart to harness
selftests/futex: Migrate futex_requeue_pi_mismatched_ops to harness
selftests/futex: Migrate futex_requeue_pi to harness
selftests/futex: Migrate futex_requeue to harness
selftests/futex: Migrate futex_wait_uninitialized_heap to harness
selftests/futex: Migrate futex_wait_private_mapped_file to harness
selftests/futex: Migrate futex_wait to harness
selftests/futex: Correct validation logic in waitv
selftests/futex: Migrate functional tests to harness
selftests/futex: Remove static keyword from 'head'
futex: Remove unnecessary NULL check before kvfree()
selftests/rseq: Replace glibc-specific __GNUC_PREREQ with portable check
|
|
Pull interrupt chip driver updates from Thomas Gleixner:
- Update the realtek-rtl driver to support multiple interrupt domains
and remove hardcoded assumptions about the underlying demultiplex
interrupt
- Remove the unused IMGPDC driver, which got orphaned when the metag
architecture was removed long ago.
- Update the Qualcom PDC interrupt chip driver to support differnent
versions of the IP block, to properly differentiable between direct
and GPIO based interrupts and to utilize pass through mode to the
underlying GIC interrupt.
- Remove redundant dev_err() and dev_err_probe() invocations in various
drivers as that error logging has been moved to devm_request_*_irq().
- Support dynamic MSI-X allocations in the GIC-V3-ITS MSI parent domain
driver. That's important for VFIO pass through devices to avoid
reinitialization of the MSI-X space when extending the vector range.
Such a reinitialization can result is lost interrupts and stale
devices.
- Fix a bunch of resource leaks in various driver error paths
- The usual small improvements all over the place
* tag 'irq-drivers-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
irqchip/gic-v3-its: Fix grammar and replace a bit number with its symbol
irqchip/gic-v3-its: Prevent leak in its_vpe_irq_domain_alloc()
irqchip/renesas-irqc: Fix generic interrupt chip leak on remove
irqchip/gic-v3-its: Enable dynamic MSI-X allocation
irqchip: Remove redundant dev_err()/dev_err_probe()
irqchip/gic-v5/iwb: Fix stray verb in comment
irqchip/qcom-pdc: Fix kernel doc for qcom_pdc_gic_secondary_set_type()
irqchip/gic-v3-its: Fix its node leak in gic_acpi_parse_madt_its()
irqchip/gic-v3-its: Fix memleak in its_probe_one()
irqchip/qcom-pdc: Configure PDC to pass through mode
irqchip/qcom-pdc: Differentiate between direct SPI and GPIO as SPI
irqchip/qcom-pdc: Move all static variables to struct pdc_desc
irqchip/qcom-pdc: Restructure version support
irqchip/irq-imgpdc: Remove unused driver
irqchip/irq-realtek-rtl: Activate multiple parents
irqchip/irq-realtek-rtl: Allow shuffled interrupt order
irqchip/irq-realtek-rtl: Add a select function
irqchip/irq-realtek-rtl: Add mask for interrupt handling
irqchip/irq-realtek-rtl: Add interrupt data structure
irqchip/irq-realtek-rtl: Split out parent setup code
...
|
|
Pull generic interrupt subsystem updates from Thomas Gleixner:
- Remove pointless NULL checks of the kstats_irqs field. That's a
historical left over and not longer required.
- Add Radu Rendec as reviewer. Radu thankfully stepped up to help
reviewing the interrupt core and the related drivers code.
- The usual small improvements and fixes
* tag 'irq-core-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Add Radu Rendec as reviewer for the interrupt subsystem
genirq/msi: Move misplaced EXPORT_SYMBOL_GPL for msi_domain_free_irqs_all()
parisc: Remove unnecessary NULL check of the kstat_irqs field
genirq: Remove unnecessary NULL check of the kstat_irqs field
irqdomain: Remove unnedded NULL check in __irq_domain_[de]activate_irq()
genirq/manage: Use irqd_get_parent_data() helper in __irq_get_irqchip_state()
irqdomain: Plug leak in irq_domain_alloc_irqs_locked() error path
|
|
Pull rseq updates from Thomas Gleixner:
"Two trivial updates for RSEQ:
- Add the recently added new test binaries to .gitignore
- Fix a trivial typo in a comment"
* tag 'core-rseq-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/rseq: Add missing test binaries to .gitignore
selftests/rseq: Fix spelling of accommodate
|
|
Pull generic entry code updates from Thomas Gleixner:
- Make syscall user dispatching configurable
Not all architectures can makes use of syscall user dispatching.
Allow them to disable the feature completely.
- Consolidate stack randomization for the generic entry code and the
architectures using it.
Stack randomization on syscall entry was sprinkled throughout the
architecture specific low level entry code and in some cases at the
wrong points, e.g. before establishing state, which violates the
non-instrumentable constraints of that code.
Clean this up by integrating stack randomization into the generic
entry code helpers so that it is invoked at the earliest possible
point right after establishing state and converting all generic entry
code using architecture over.
- Clean up the syscall number handling in the generic entry code. It
works correctly for architectures which have a separate return value
storage in pt_regs, but fails to distinguish the case where user
space handed in -1 as syscall number from the case where the entry
code rejects it by returning -1 to the callers. Aside of that the
return value functionality of those interfaces is not really
intuitive.
Fix this by separating the decision to reject a syscall (user
dispatch, ptrace, seccomp ...) from the potential modification of the
syscall number through these mechanisms.
This solves most of the problems for architectures which do not have
a separate return value storage in pt_regs except for the case where
a tracepoint has a BPF script or a probe attached which overwrite
both the syscall number and the return value. But that's a problem
which cannot be solved in the generic code, that only can be
addressed by separating the storage model in the affected
architectures.
* tag 'core-entry-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
entry, treewide: Make syscall_enter_from_user_mode[_work]() indicate syscall execution
entry: Make return type of syscall_trace_enter() bool
entry: Rework trace_syscall_enter()
entry: Rework syscall_audit_enter()
syscall_user_dispatch: Introduce ARCH_SUPPORTS_SYSCALL_USER_DISPATCH
entry: Fix seccomp bypass after ptrace with TSYNC
x86/entry: Simplify the syscall number logic
x86/entry: Get rid of the sys_ni_syscall() indirection
x86/entry: Make syscall functions static
ptrace, treewide: Rename ptrace_report_syscall_entry() to ptrace_report_syscall_permit_entry()
seccomp, treewide: Rename and convert __secure_computing() to return boolean
entry: Use syscall number instead of rereading it
entry: Remove syscall_enter_from_user_mode()
x86/syscall: Use [syscall_]enter_from_user_mode_randomize_stack()
s390/syscall: Use enter_from_user_mode_randomize_stack()
riscv/syscall: Use syscall_enter_from_user_mode_randomize_stack()
powerpc/syscall: Use syscall_enter_from_user_mode_randomize_stack()
loongarch/syscall: Use syscall_enter_from_user_mode_randomize_stack()
entry: Provide [syscall_]enter_from_user_mode_randomize_stack()
randomize_kstack: Provide add_random_kstack_offset_irqsoff()
...
|
|
The name and description for NVIDIA Tegra410 Olympus implementation-defined
event 0x0197 incorrectly indicate a TXREQ limit between one quarter and
one half. Correct them to describe a TXREQ limit below one half.
Fixes: 86ff690f45cc ("perf vendor events arm64: Add Tegra410 Olympus PMU events")
Signed-off-by: Besar Wicaksono <bwicaksono@nvidia.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The L1D prefetcher metrics (l1d_cache_rw_miss_ratio, l1d_demand_accesses,
etc.) were incorrectly assigned to MetricGroup "L1I_Prefetcher_Effectiveness"
and vice versa. This causes 'perf stat --metric-group L1D_Prefetcher_Effectiveness'
to display L1I metrics, which is misleading.
Swap the MetricGroup assignments so L1D metrics are in the L1D group and
L1I metrics are in the L1I group.
Fixes: 86ff690f45cc ("perf vendor events arm64: Add Tegra410 Olympus PMU events")
Signed-off-by: Saurav Sachidanand <sauravsc@amazon.com>
Reviewed-by: Besar Wicaksono <bwicaksono@nvidia.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add support for the AMD_PT I3C controller by introducing the following
changes:
- Add AMD_PT I3C controller platform device ID in core.c.
- Register AMD_PT I3C controller PCI ID in mipi-i3c-hci-pci.c.
Co-developed-by: Patrick Yen <Patrick_Yen@asmedia.com.tw>
Signed-off-by: Patrick Yen <Patrick_Yen@asmedia.com.tw>
Signed-off-by: Jian-Ming Liao <Jm_Liao@asmedia.com.tw>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260818104106.763772-4-Jm_Liao@asmedia.com.tw
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Support explicit enablement and starting of PIO queues as required by
HCI v1.2.
Handle alternate PIO queue sizes via ALT_QUEUE_SIZE register.
Implement explicit PIO queue stopping/disabling and restart logic after
errors.
Co-developed-by: Patrick Yen <Patrick_Yen@asmedia.com.tw>
Signed-off-by: Patrick Yen <Patrick_Yen@asmedia.com.tw>
Signed-off-by: Jian-Ming Liao <Jm_Liao@asmedia.com.tw>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260818104106.763772-3-Jm_Liao@asmedia.com.tw
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
In PIO mode initialization, STAT_IBI_STATUS_THLD was missing from
pio->enabled_irqs. As a result, the host controller interrupt signal for
IBI threshold was never enabled when transfer starts, preventing IBI
status descriptors from being properly processed in PIO mode.
Include STAT_IBI_STATUS_THLD in pio->enabled_irqs so that the IBI
threshold interrupt is activated alongside error interrupts upon the first
transfer.
Fixes: 9ad9a52cce28 ("i3c/master: introduce the mipi-i3c-hci driver")
Co-developed-by: Patrick Yen <Patrick_Yen@asmedia.com.tw>
Signed-off-by: Patrick Yen <Patrick_Yen@asmedia.com.tw>
Signed-off-by: Jian-Ming Liao <Jm_Liao@asmedia.com.tw>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260818104106.763772-2-Jm_Liao@asmedia.com.tw
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Change clock name "pclk" to "apb" to match dt-binding doc. No upstream
device tree sources currently use the "pclk" clock name, so no any
backward compatibility issues.
Fixes: a0d48ebf39ce ("i3c: dw: Add optional apb clock")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260814040345.23033-1-jszhang@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Pull x86 documentation updates from Ingo Molnar:
- Misc x86 documentation updates (Randy Dunlap, Daniel Gibson)
* tag 'x86-documentation-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation/arch/x86/amd-debugging: Add example for reset register
x86/intel/quark: Clean up function kernel-doc
x86/speculation: Drop Excess function parameter descriptions
x86/lib: checksum_64.h: Eliminate all kernel-doc warnings
x86/barrier: Use correct parameter names in kernel-doc
|
|
Pull x86 core updates from Ingo Molnar:
- Optimize the kcfi call sequence (Peter Zijlstra)
- Use sfence for wmb() if SSE is available (Yao Zi)
* tag 'x86-core-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/locking: Use sfence for wmb() if SSE is available
x86/kcfi: Optimize call sequence
|
|
Pull x86 build update from Ingo Molnar:
- Only align ENTRY_TEXT to PMD_SIZE if necessary (Hamza Mahfooz)
* tag 'x86-build-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/build: Only align ENTRY_TEXT to PMD_SIZE if necessary
|
|
Pull x86 boot updates from Ingo Molnar:
- Misc simplifications and cleanups (Thorsten Blum)
* tag 'x86-boot-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Use bool and IS_ENABLED() to simplify query_edd()
x86/boot: Use IS_ENABLED() to simplify built-in-or-module checks
x86/purgatory: Return bool from verify_sha256_digest()
|
|
The dw_i3c_cmd is dynamically allocated, make it smaller. For example
on 64bit platforms, we reduce the size from 48 bytes to 32 bytes.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260813044603.22425-1-jszhang@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Pull x86 MSR updates from Ingo Molnar:
- Streamline the x86 MSR handling APIs along the 64-bit variants,
simplifying the interfaces.
Removal of the old APIs is planned for the next cycle, to reduce
churn & integration pain (Juergen Gross)
* tag 'x86-msr-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
x86/mce: Work around build warning after MSR-interface switch
cpufreq: Stop using 32-bit MSR interfaces
x86/featctl: Stop using 32-bit MSR interfaces
KVM/x86: Stop using 32-bit MSR interfaces
x86/mtrr: Stop using 32-bit MSR interfaces
acpi: Stop using 32-bit MSR interfaces
powercap: Stop using 32-bit MSR interfaces
thermal/intel: Stop using 32-bit MSR interfaces
x86/olpc: Stop using 32-bit MSR interfaces
x86/hyperv: Stop using 32-bit MSR interfaces
hwmon: Stop using 32-bit MSR interfaces
EDAC: Stop using 32-bit MSR interfaces
x86/cpu: Stop using 32-bit MSR interfaces
x86/apic: Stop using 32-bit MSR interfaces
x86/resctrl: Stop using 32-bit MSR interfaces
x86/tsc: Stop using 32-bit MSR interfaces
x86/amd: Stop using 32-bit MSR interfaces
x86/pci: Stop using 32-bit MSR interfaces
x86/hygon: Stop using 32-bit MSR interfaces
x86/mce: Stop using 32-bit MSR interfaces
...
|
|
Use the well defined COMMAND_PORT_TRANSFER_ARG macro instead of
hardcoding '1'.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260813044225.22237-1-jszhang@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Pull scheduler updates from Ingo Molnar:
"Load-balancing updates:
- 'flatten the pick': improve cgroup scheduling, which has always
been problematic and painful, which has caused various scheduling
misbehavior such as the mishandling of reniced tasks et al.
Add various cgroup weight distribution methods via cgroup_mode:
'up', 'max', 'concur' and 'tasks' - with the default being 'concur'
which is the most precise yet also most expensive version.
Finally, change cgroup scheduling to a single runqueue (Peter
Zijlstra)
- Series to improve the scheduling latency of short slice tasks
(Vincent Guittot)
- Series to fix cluster scheduling in the presence of asymmetric
capacity (Ricardo Neri)
- Prefer fully idle cores for NOHZ balancing (Andrea Righi)
- Don't trigger active load-balancing if src_rq->curr is not on_rq
(Xin Zhao)
PSI updates:
- Skip irqtime accounting when no new irq time has elapsed (Usama
Arif)
Scheduler debugging updates:
- Remove unused schedstats (Shrikanth Hegde)
- Defer freeing of cpumask memblock memory to initcall (Waiman Long)
Misc fixes and updates by Yu C Chen, K Prateek Nayak, Peter Zijlstra,
Vincent Guittot, Xin Zhao, Yury Norov, Zhan Xusheng"
* tag 'sched-core-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
sched/fair: Fix flat hierarchy
sched/isolation: Defer freeing of cpumask memblock memory to initcall
sched/topology: Restore SD_PREFER_SIBLING in domains with asymmetric capacity
sched/fair: Allow load balancing between CPUs of identical capacity
sched/fair: Skip misfit load accounting when the destination CPU cannot help
sched/fair: Check CPU capacity before comparing group types during load balance
sched/fair: Also gate overloaded status update for SD_ASYM_CPUCAPACITY
sched/fair: Do not skip CPUs of similar capacity with busy SMT siblings
sched/fair: Prefer fully idle cores for NOHZ balancing
stop_machine: Make stop_one_cpu_nowait() return void
sched/eevdf: Delayed dequeue task can't preempt
sched/fair: Fix stale comments referring to removed CFS concepts
sched/debug: Remove unused schedstats
sched/psi: skip irqtime accounting when no new irq time has elapsed
sched/fair: Reflow sched_balance_rq()
sched/fair: Simplify balance_interval reset logic in sched_balance_rq()
sched/fair: Don't trigger active lb if src_rq->curr is not on_rq
sched/eevdf: Speedup short slice task scheduling
sched/eevdf: Always update slice protection
sched/eevdf: Cancel slice protection if short slice task is eligible
...
|
|
Pull locking updates from Ingo Molnar:
"Futexes:
- Use runtime constants for futex_hash computation (K Prateek Nayak,
Peter Zijlstra)
- Optimise the size check get_futex_key() (Sebastian Andrzej Siewior)
- Avoid private hash use-after-free on final put (Felix Hoffmann)
- Tell kmemleak we're not leaking __futex_queues (Peter Zijlstra)
Rust integration updates:
- Implement refcounted interrupt disable and SpinLockIrq for Rust
(Boqun Feng, Heiko Carstens, Joel Fernandes, Lyude Paul)
- Rust sync: add helpers for mb, dma_mb and friends; add generic
memory barriers and use LKMM atomics instead of Rust atomics in the
revocable code (Gary Guo)
- Add abstraction and integrate synchronize_rcu() (Philipp Stanner)
Lock debugging:
- Add qspinlock contended_release tracepoint (Dmitry Ilvokhin, Peter
Zijlstra)
- Enable the printing of held locks of remote running tasks and print
task CPU (Ingo Molnar)
- percpu-rwsem: Annotate intentional data race in readers_active_check()
(Sun Shaojie)
Misc fixes and updates by Boqun Feng, Peter Zijlstra, Fangrui Song,
Naveen Kumar Chaudhary and Thomas Huth"
* tag 'locking-core-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
rust: sync: Introduce SpinLockIrq::lock_with() and friends
rust: sync: Add SpinLockIrq
rust: sync: Use super::* in spinlock.rs
rust: helper: Add spin_{un,}lock_irq_{enable,disable}() helpers
rust: Introduce interrupt module
s390/preempt: Enable HAS_SEPARATE_PREEMPT_RESCHED_BITS
arm64: sched/preempt: Enable HAS_SEPARATE_PREEMPT_RESCHED_BITS
preempt: Introduce HAS_SEPARATE_PREEMPT_RESCHED_BITS
sched: Avoid signed comparison of preempt_count() in __cant_migrate()
sched: Remove the unused preempt_offset parameter of __cant_sleep()
locking: Switch to _irq_{disable,enable}() variants in cleanup guards
irq: Add KUnit test for refcounted interrupt enable/disable
irq,spin_lock: Add counted interrupt disabling/enabling
openrisc: Include <linux/cpumask.h> in smp.h
preempt: Introduce __preempt_count_{sub,add}_return()
preempt: Introduce HARDIRQ_DISABLE_BITS
preempt: Track NMI nesting to separate per-CPU counter
futex: Tell kmemleak we're not leaking __futex_queues
x86/paravirt: Trace contended_release on unlock
tracing/lock: Use TRACE_EVENT_FN() for contended_release
...
|
Jiri Kosina
Linus Torvalds
Mark Brown
Lukas Wunner
Besar Wicaksono
Saurav Sachidanand
Jian-Ming Liao
Jisheng Zhang