| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull networking fixes from David Miller:
1) Disable RISCV BPF JIT builds when !MMU, from Björn Töpel.
2) nf_tables leaves dangling pointer after free, fix from Eric Dumazet.
3) Out of boundary write in __xsk_rcv_memcpy(), fix from Li RongQing.
4) Adjust icmp6 message source address selection when routes have a
preferred source address set, from Tim Stallard.
5) Be sure to validate HSR protocol version when creating new links,
from Taehee Yoo.
6) CAP_NET_ADMIN should be sufficient to manage l2tp tunnels even in
non-initial namespaces, from Michael Weiß.
7) Missing release firmware call in mlx5, from Eran Ben Elisha.
8) Fix variable type in macsec_changelink(), caught by KASAN. Fix from
Taehee Yoo.
9) Fix pause frame negotiation in marvell phy driver, from Clemens
Gruber.
10) Record RX queue early enough in tun packet paths such that XDP
programs will see the correct RX queue index, from Gilberto Bertin.
11) Fix double unlock in mptcp, from Florian Westphal.
12) Fix offset overflow in ARM bpf JIT, from Luke Nelson.
13) marvell10g needs to soft reset PHY when coming out of low power
mode, from Russell King.
14) Fix MTU setting regression in stmmac for some chip types, from
Florian Fainelli.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits)
amd-xgbe: Use __napi_schedule() in BH context
mISDN: make dmril and dmrim static
net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes
net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode
tipc: fix incorrect increasing of link window
Documentation: Fix tcp_challenge_ack_limit default value
net: tulip: make early_486_chipsets static
dt-bindings: net: ethernet-phy: add desciption for ethernet-phy-id1234.d400
ipv6: remove redundant assignment to variable err
net/rds: Use ERR_PTR for rds_message_alloc_sgs()
net: mscc: ocelot: fix untagged packet drops when enslaving to vlan aware bridge
selftests/bpf: Check for correct program attach/detach in xdp_attach test
libbpf: Fix type of old_fd in bpf_xdp_set_link_opts
libbpf: Always specify expected_attach_type on program load if supported
xsk: Add missing check on user supplied headroom size
mac80211: fix channel switch trigger from unknown mesh peer
mac80211: fix race in ieee80211_register_hw()
net: marvell10g: soft-reset the PHY when coming out of low power
net: marvell10g: report firmware version
net/cxgb4: Check the return from t4_query_params properly
...
|
|
The default value of tcp_challenge_ack_limit has been changed from
100 to 1000 and this patch fixes its documentation.
Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The description below is already in use in
'rk3228-evb.dts', 'rk3229-xms6.dts' and 'rk3328.dtsi'
but somehow never added to a document, so add
"ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22"
for ethernet-phy nodes on Rockchip platforms to
'ethernet-phy.yaml'.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The EFI handover protocol was introduced on x86 to permit the boot
loader to pass a populated boot_params structure as an additional
function argument to the entry point. This allows the bootloader to
pass the base and size of a initrd image, which is more flexible
than relying on the EFI stub's file I/O routines, which can only
access the file system from which the kernel image itself was loaded
from firmware.
This approach requires a fair amount of internal knowledge regarding
the layout of the boot_params structure on the part of the boot loader,
as well as knowledge regarding the allowed placement of the initrd in
memory, and so it has been deprecated in favour of a new initrd loading
method that is based on existing UEFI protocols and best practices.
So update the x86 boot protocol documentation to clarify that the EFI
handover protocol has been deprecated, and while at it, add a note that
invoking the EFI handover protocol still requires the PE/COFF image to
be loaded properly (as opposed to simply being copied into memory).
Also, drop the code32_start header field from the list of values that
need to be provided, as this is no longer required.
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200409130434.6736-7-ardb@kernel.org
|
|
Pull time(keeping) updates from Thomas Gleixner:
- Fix the time_for_children symlink in /proc/$PID/ so it properly
reflects that it part of the 'time' namespace
- Add the missing userns limit for the allowed number of time
namespaces, which was half defined but the actual array member was
not added. This went unnoticed as the array has an exessive empty
member at the end but introduced a user visible regression as the
output was corrupted.
- Prevent further silent ucount corruption by adding a BUILD_BUG_ON()
to catch half updated data.
* tag 'timers-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ucount: Make sure ucounts in /proc/sys/user don't regress again
time/namespace: Add max_time_namespaces ucount
time/namespace: Fix time_for_children symlink
|
|
Pull nios2 updates from Ley Foon Tan:
- Remove nios2-dev@lists.rocketboards.org from MAINTAINERS
- remove 'resetvalue' property
- rename 'altr,gpio-bank-width' -> 'altr,ngpio'
- enable the common clk subsystem on Nios2
* tag 'nios2-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
MAINTAINERS: Remove nios2-dev@lists.rocketboards.org
arch: nios2: remove 'resetvalue' property
arch: nios2: rename 'altr,gpio-bank-width' -> 'altr,ngpio'
arch: nios2: Enable the common clk subsystem on Nios2
|
|
Pull more Kbuild updates from Masahiro Yamada:
- raise minimum supported binutils version to 2.23
- remove old CONFIG_AS_* macros that we know binutils >= 2.23 supports
- move remaining CONFIG_AS_* tests to Kconfig from Makefile
- enable -Wtautological-compare warnings to catch more issues
- do not support GCC plugins for GCC <= 4.7
- fix various breakages of 'make xconfig'
- include the linker version used for linking the kernel into
LINUX_COMPILER, which is used for the banner, and also exposed to
/proc/version
- link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y, which
allows us to remove the lib-ksyms.o workaround, and to solve the last
known issue of the LLVM linker
- add dummy tools in scripts/dummy-tools/ to enable all compiler tests
in Kconfig, which will be useful for distro maintainers
- support the single switch, LLVM=1 to use Clang and all LLVM utilities
instead of GCC and Binutils.
- support LLVM_IAS=1 to enable the integrated assembler, which is still
experimental
* tag 'kbuild-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (36 commits)
kbuild: fix comment about missing include guard detection
kbuild: support LLVM=1 to switch the default tools to Clang/LLVM
kbuild: replace AS=clang with LLVM_IAS=1
kbuild: add dummy toolchains to enable all cc-option etc. in Kconfig
kbuild: link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y
MIPS: fw: arc: add __weak to prom_meminit and prom_free_prom_memory
kbuild: remove -I$(srctree)/tools/include from scripts/Makefile
kbuild: do not pass $(KBUILD_CFLAGS) to scripts/mkcompile_h
Documentation/llvm: fix the name of llvm-size
kbuild: mkcompile_h: Include $LD version in /proc/version
kconfig: qconf: Fix a few alignment issues
kconfig: qconf: remove some old bogus TODOs
kconfig: qconf: fix support for the split view mode
kconfig: qconf: fix the content of the main widget
kconfig: qconf: Change title for the item window
kconfig: qconf: clean deprecated warnings
gcc-plugins: drop support for GCC <= 4.7
kbuild: Enable -Wtautological-compare
x86: update AS_* macros to binutils >=2.23, supporting ADX and AVX2
crypto: x86 - clean up poly1305-x86_64-cryptogams.S by 'make clean'
...
|
|
Add the full net DIM API to the net_dim.rst file.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert the Dynamic Interrupt Moderation doc to RST and
use the RST features like syntax highlight, function and
structure documentation, enumerations, table of contents.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge yet more updates from Andrew Morton:
- Almost all of the rest of MM (memcg, slab-generic, slab, pagealloc,
gup, hugetlb, pagemap, memremap)
- Various other things (hfs, ocfs2, kmod, misc, seqfile)
* akpm: (34 commits)
ipc/util.c: sysvipc_find_ipc() should increase position index
kernel/gcov/fs.c: gcov_seq_next() should increase position index
fs/seq_file.c: seq_read(): add info message about buggy .next functions
drivers/dma/tegra20-apb-dma.c: fix platform_get_irq.cocci warnings
change email address for Pali Rohár
selftests: kmod: test disabling module autoloading
selftests: kmod: fix handling test numbers above 9
docs: admin-guide: document the kernel.modprobe sysctl
fs/filesystems.c: downgrade user-reachable WARN_ONCE() to pr_warn_once()
kmod: make request_module() return an error when autoloading is disabled
mm/memremap: set caching mode for PCI P2PDMA memory to WC
mm/memory_hotplug: add pgprot_t to mhp_params
powerpc/mm: thread pgprot_t through create_section_mapping()
x86/mm: introduce __set_memory_prot()
x86/mm: thread pgprot_t through init_memory_mapping()
mm/memory_hotplug: rename mhp_restrictions to mhp_params
mm/memory_hotplug: drop the flags field from struct mhp_restrictions
mm/special: create generic fallbacks for pte_special() and pte_mkspecial()
mm/vma: introduce VM_ACCESS_FLAGS
mm/vma: define a default value for VM_DATA_DEFAULT_FLAGS
...
|
|
Pull Documentation fixes from Jonathan Corbet:
"A handful of late-arriving fixes for the documentation tree"
* tag 'docs-5.7-2' of git://git.lwn.net/linux:
Documentation: android: binderfs: add 'stats' mount option
Documentation: driver-api/usb/writing_usb_driver.rst Updates documentation links
docs: driver-api: address duplicate label warning
Documentation: sysrq: fix RST formatting
docs: kernel-parameters.txt: Fix broken references
docs: kernel-parameters.txt: Remove nompx
docs: filesystems: fix typo in qnx6.rst
|
|
Pull orangefs updates from Mike Marshall:
"A fix and two cleanups.
Fix:
- Christoph Hellwig noticed that some logic I added to
orangefs_file_read_iter introduced a race condition, so he sent a
reversion patch. I had to modify his patch since reverting at this
point broke Orangefs.
Cleanups:
- Christoph Hellwig noticed that we were doing some unnecessary work
in orangefs_flush, so he sent in a patch that removed the un-needed
code.
- Al Viro told me he had trouble building Orangefs. Orangefs should
be easy to build, even for Al :-).
I looked back at the test server build notes in orangefs.txt, just
in case that's where the trouble really is, and found a couple of
typos and made a couple of clarifications"
* tag 'for-linus-5.7-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
orangefs: clarify build steps for test server in orangefs.txt
orangefs: don't mess with I_DIRTY_TIMES in orangefs_flush
orangefs: get rid of knob code...
|
|
For security reasons I stopped using gmail account and kernel address is
now up-to-date alias to my personal address.
People periodically send me emails to address which they found in source
code of drivers, so this change reflects state where people can contact
me.
[ Added .mailmap entry as per Joe Perches - Linus ]
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joe Perches <joe@perches.com>
Link: http://lkml.kernel.org/r/20200307104237.8199-1-pali@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Document the kernel.modprobe sysctl in the same place that all the other
kernel.* sysctls are documented. Make sure to mention how to use this
sysctl to completely disable module autoloading, and how this sysctl
relates to CONFIG_STATIC_USERMODEHELPER.
[ebiggers@google.com: v5]
Link: http://lkml.kernel.org/r/20200318230515.171692-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: NeilBrown <neilb@suse.com>
Link: http://lkml.kernel.org/r/20200312202552.241885-4-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 944d9fec8d7a ("hugetlb: add support for gigantic page allocation
at runtime") has added the run-time allocation of gigantic pages.
However it actually works only at early stages of the system loading,
when the majority of memory is free. After some time the memory gets
fragmented by non-movable pages, so the chances to find a contiguous 1GB
block are getting close to zero. Even dropping caches manually doesn't
help a lot.
At large scale rebooting servers in order to allocate gigantic hugepages
is quite expensive and complex. At the same time keeping some constant
percentage of memory in reserved hugepages even if the workload isn't
using it is a big waste: not all workloads can benefit from using 1 GB
pages.
The following solution can solve the problem:
1) On boot time a dedicated cma area* is reserved. The size is passed
as a kernel argument.
2) Run-time allocations of gigantic hugepages are performed using the
cma allocator and the dedicated cma area
In this case gigantic hugepages can be allocated successfully with a
high probability, however the memory isn't completely wasted if nobody
is using 1GB hugepages: it can be used for pagecache, anon memory, THPs,
etc.
* On a multi-node machine a per-node cma area is allocated on each node.
Following gigantic hugetlb allocation are using the first available
numa node if the mask isn't specified by a user.
Usage:
1) configure the kernel to allocate a cma area for hugetlb allocations:
pass hugetlb_cma=10G as a kernel argument
2) allocate hugetlb pages as usual, e.g.
echo 10 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
If the option isn't enabled or the allocation of the cma area failed,
the current behavior of the system is preserved.
x86 and arm-64 are covered by this patch, other architectures can be
trivially added later.
The patch contains clean-ups and fixes proposed and implemented by Aslan
Bakirov and Randy Dunlap. It also contains ideas and suggestions
proposed by Rik van Riel, Michal Hocko and Mike Kravetz. Thanks!
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andreas Schaufler <andreas.schaufler@gmx.de>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Aslan Bakirov <aslan@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Link: http://lkml.kernel.org/r/20200407163840.92263-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull pwm updates from Thierry Reding:
"There's quite a few changes this time around.
Most of these are fixes and cleanups, but there's also new chip
support for some drivers and a bit of rework"
* tag 'pwm/for-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (33 commits)
pwm: pca9685: Fix PWM/GPIO inter-operation
pwm: Make pwm_apply_state_debug() static
pwm: meson: Remove redundant assignment to variable fin_freq
pwm: jz4740: Allow selection of PWM channels 0 and 1
pwm: jz4740: Obtain regmap from parent node
pwm: jz4740: Improve algorithm of clock calculation
pwm: jz4740: Use clocks from TCU driver
pwm: sun4i: Remove redundant needs_delay
pwm: omap-dmtimer: Implement .apply callback
pwm: omap-dmtimer: Do not disable PWM before changing period/duty_cycle
pwm: omap-dmtimer: Fix PWM enabling sequence
pwm: omap-dmtimer: Update description for PWM OMAP DM timer
pwm: omap-dmtimer: Drop unused header file
pwm: renesas-tpu: Drop confusing registered message
pwm: renesas-tpu: Fix late Runtime PM enablement
pwm: rcar: Fix late Runtime PM enablement
dt-bindings: pwm: renesas-tpu: Document more R-Car Gen2 support
pwm: meson: Fix confusing indentation
pwm: pca9685: Use gpio core provided macro GPIO_LINE_DIRECTION_OUT
pwm: pca9685: Replace CONFIG_PM with __maybe_unused
...
|
|
Pull IPMI updates from Corey Minyard:
"Bug fixes for main IPMI driver, kcs updates
A couple of bug fixes for the main IPMI driver, one functional and two
annotations.
The kcs driver has some significant updates that have been pending for
a while, but I forgot to include in next until a week ago. But this
code is only used by the people who are sending it to me, really, so
it's not a big deal. I did want it to sit in next for at least a week,
and it did result in a fix"
* tag 'for-linus-5.7-1' of git://github.com/cminyard/linux-ipmi:
ipmi: kcs: Fix aspeed_kcs_probe_of_v1()
ipmi: Add missing annotation for ipmi_ssif_lock_cond() and ipmi_ssif_unlock_cond()
ipmi: kcs: aspeed: Implement v2 bindings
ipmi: kcs: Finish configuring ASPEED KCS device before enable
dt-bindings: ipmi: aspeed: Introduce a v2 binding for KCS
ipmi: fix hung processes in __get_guid()
drivers: char: ipmi: ipmi_msghandler: Pass lockdep expression to RCU lists
|
|
Pull sound fixes from Takashi Iwai:
"A collection of small fixes gathered since the previous update.
ALSA core:
- Regression fix for OSS PCM emulation
ASoC:
- Trivial fixes in reg bit mask ops, DAPM, DPCM and topology
- Lots of fixes for Intel-based devices
- Minor fixes for AMD, STM32, Qualcomm, Realtek
Others:
- Fixes for the bugs in mixer handling in HD-audio and ice1724
drivers that were caught by the recent kctl validator
- New quirks for HD-audio and USB-audio
Also this contains a fix for EDD firmware fix, which slipped from
anyone's hands"
* tag 'sound-fix-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (35 commits)
ALSA: hda: Add driver blacklist
ALSA: usb-audio: Add mixer workaround for TRX40 and co
ALSA: hda/realtek - Add quirk for MSI GL63
ALSA: ice1724: Fix invalid access for enumerated ctl items
ALSA: hda: Fix potential access overflow in beep helper
ASoC: cs4270: pull reset GPIO low then high
ALSA: hda/realtek - Add HP new mute led supported for ALC236
ALSA: hda/realtek - Add supported new mute Led for HP
ASoC: rt5645: Add platform-data for Medion E1239T
ASoC: Intel: bytcr_rt5640: Add quirk for MPMAN MPWIN895CL tablet
ASoC: stm32: sai: Add missing cleanup
ALSA: usb-audio: Add registration quirk for Kingston HyperX Cloud Alpha S
ASoC: Intel: atom: Fix uninitialized variable compiler warning
ASoC: Intel: atom: Check drv->lock is locked in sst_fill_and_send_cmd_unlocked
ASoC: Intel: atom: Take the drv->lock mutex before calling sst_send_slot_map()
ASoC: SOF: Turn "firmware boot complete" message into a dbg message
ALSA: usb-audio: Add Pioneer DJ DJM-250MK2 quirk
ALSA: pcm: oss: Fix regression by buffer overflow fix (again)
ALSA: pcm: oss: Fix regression by buffer overflow fix
edd: Use scnprintf() for avoiding potential buffer overflow
...
|
|
The 'altr,pio-1.0' driver does not handle the 'resetvalue', so remove it.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
|
|
There is no more 'altr,gpio-bank-width' in the 'altr,pio-1.0' driver.
There is a 'altr,ngpio' which is what the property wants to configure.
This change updates all occurrences of 'altr,gpio-bank-width' to
'altr,ngpio'.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
|
|
Pull more ACPI updates from Rafael Wysocki:
"These prevent a false-positive static checker warning from triggering
in the ACPI EC driver (Rafael Wysocki), fix white space in an ACPI
document (Vilhelm Prytz) and add static annotation to one variable
(Jason Yan)"
* tag 'acpi-5.7-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI, x86/boot: make acpi_nobgrt static
Documentation: firmware-guide: ACPI: fix table alignment in namespace.rst
ACPI: EC: Fix up fast path check in acpi_ec_add()
|
|
Add documentation of the binderfs 'stats' mount option.
Description taken from the commit message.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/baa0aa81-007d-af46-16a5-91fead0bd1b9@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
At 'make htmldocs' the following warning is thrown:
Documentation/networking/devlink/devlink-trap.rst:302:
WARNING: undefined label: generic-packet-trap-groups
Fixes the warning by setting the label to the specified header,
within the same document.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull 9p documentation update from Dominique Martinet:
"Document the new O_NONBLOCK short read behavior"
* tag '9p-for-5.7-2' of git://github.com/martinetd/linux:
9p: document short read behaviour with O_NONBLOCK
|
|
Pull ceph updates from Ilya Dryomov:
"The main items are:
- support for asynchronous create and unlink (Jeff Layton).
Creates and unlinks are satisfied locally, without waiting for a
reply from the MDS, provided the client has been granted
appropriate caps (new in v15.y.z ("Octopus") release). This can be
a big help for metadata heavy workloads such as tar and rsync.
Opt-in with the new nowsync mount option.
- multiple blk-mq queues for rbd (Hannes Reinecke and myself).
When the driver was converted to blk-mq, we settled on a single
blk-mq queue because of a global lock in libceph and some other
technical debt. These have since been addressed, so allocate a
queue per CPU to enhance parallelism.
- don't hold onto caps that aren't actually needed (Zheng Yan).
This has been our long-standing behavior, but it causes issues with
some active/standby applications (synchronous I/O, stalls if the
standby goes down, etc).
- .snap directory timestamps consistent with ceph-fuse (Luis
Henriques)"
* tag 'ceph-for-5.7-rc1' of git://github.com/ceph/ceph-client: (49 commits)
ceph: fix snapshot directory timestamps
ceph: wait for async creating inode before requesting new max size
ceph: don't skip updating wanted caps when cap is stale
ceph: request new max size only when there is auth cap
ceph: cleanup return error of try_get_cap_refs()
ceph: return ceph_mdsc_do_request() errors from __get_parent()
ceph: check all mds' caps after page writeback
ceph: update i_requested_max_size only when sending cap msg to auth mds
ceph: simplify calling of ceph_get_fmode()
ceph: remove delay check logic from ceph_check_caps()
ceph: consider inode's last read/write when calculating wanted caps
ceph: always renew caps if mds_wanted is insufficient
ceph: update dentry lease for async create
ceph: attempt to do async create when possible
ceph: cache layout in parent dir on first sync create
ceph: add new MDS req field to hold delegated inode number
ceph: decode interval_sets for delegated inos
ceph: make ceph_fill_inode non-static
ceph: perform asynchronous unlink if we have sufficient caps
ceph: don't take refs to want mask unless we have all bits
...
|
|
Pull overlayfs update from Miklos Szeredi:
- Fix failure to copy-up files from certain NFSv4 mounts
- Sort out inconsistencies between st_ino and i_ino (used in /proc/locks)
- Allow consistent (POSIX-y) inode numbering in more cases
- Allow virtiofs to be used as upper layer
- Miscellaneous cleanups and fixes
* tag 'ovl-update-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: document xino expected behavior
ovl: enable xino automatically in more cases
ovl: avoid possible inode number collisions with xino=on
ovl: use a private non-persistent ino pool
ovl: fix WARN_ON nlink drop to zero
ovl: fix a typo in comment
ovl: replace zero-length array with flexible-array member
ovl: ovl_obtain_alias(): don't call d_instantiate_anon() for old
ovl: strict upper fs requirements for remote upper fs
ovl: check if upper fs supports RENAME_WHITEOUT
ovl: allow remote upper
ovl: decide if revalidate needed on a per-dentry basis
ovl: separate detection of remote upper layer from stacked overlay
ovl: restructure dentry revalidation
ovl: ignore failure to copy up unknown xattrs
ovl: document permission model
ovl: simplify i_ino initialization
ovl: factor out helper ovl_get_root()
ovl: fix out of date comment and unreachable code
ovl: fix value of i_ino for lower hardlink corner case
|
|
Pull watchdog updates from Wim Van Sebroeck:
- add TI K3 RTI watchdog
- add stop_on_reboot parameter to control reboot policy
- wm831x_wdt: Remove GPIO handling
- several small fixes, improvements and clean-ups
* tag 'linux-watchdog-5.7-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: Add K3 RTI watchdog support
dt-bindings: watchdog: Add support for TI K3 RTI watchdog
watchdog: ziirave_wdt: change name to be more specific
watchdog: orion: use 0 for unset heartbeat
watchdog: npcm: remove whitespaces
watchdog: reset last_hw_keepalive time at start
watchdog: imx2_wdt: Drop .remove callback
watchdog: Add stop_on_reboot parameter to control reboot policy
watchdog: wm831x_wdt: Remove GPIO handling
watchdog: imx7ulp: Remove unused include of init.h
watchdog: imx_sc_wdt: Remove unused includes
watchdog: qcom: Use irq flags from firmware
watchdog: pm8916_wdt: Add system sleep callbacks
watchdog: qcom-wdt: disable pretimeout on timer platform
|
|
As Documentation/kbuild/llvm.rst implies, building the kernel with a
full set of LLVM tools gets very verbose and unwieldy.
Provide a single switch LLVM=1 to use Clang and LLVM tools instead
of GCC and Binutils. You can pass it from the command line or as an
environment variable.
Please note LLVM=1 does not turn on the integrated assembler. You need
to pass LLVM_IAS=1 to use it. When the upstream kernel is ready for the
integrated assembler, I think we can make it default.
We discussed what we need, and we agreed to go with a simple boolean
flag that switches both target and host tools:
https://lkml.org/lkml/2020/3/28/494
https://lkml.org/lkml/2020/4/3/43
Some items discussed, but not adopted:
- LLVM_DIR
When multiple versions of LLVM are installed, I just thought supporting
LLVM_DIR=/path/to/my/llvm/bin/ might be useful.
CC = $(LLVM_DIR)clang
LD = $(LLVM_DIR)ld.lld
...
However, we can handle this by modifying PATH. So, we decided to not do
this.
- LLVM_SUFFIX
Some distributions (e.g. Debian) package specific versions of LLVM with
naming conventions that use the version as a suffix.
CC = clang$(LLVM_SUFFIX)
LD = ld.lld(LLVM_SUFFIX)
...
will allow a user to pass LLVM_SUFFIX=-11 to use clang-11 etc.,
but the suffixed versions in /usr/bin/ are symlinks to binaries in
/usr/lib/llvm-#/bin/, so this can also be handled by PATH.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com> # build
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
The 'AS' variable is unused for building the kernel. Only the remaining
usage is to turn on the integrated assembler. A boolean flag is a better
fit for this purpose.
AS=clang was added for experts. So, I replaced it with LLVM_IAS=1,
breaking the backward compatibility.
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
|
|
ASoC: Fixes for v5.7
A collection of fixes that have been accumilated since the merge window,
mainly relating to x86 platform support.
|
|
The tool is called llvm-size, not llvm-objsize.
Fixes: fcf1b6a35c16 ("Documentation/llvm: add documentation on building w/ Clang/LLVM")
Signed-off-by: Fangrui Song <maskray@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Regular files opened with O_NONBLOCK allow read to return after a single
round-trip with the server instead of trying to fill buffer.
Add a few lines in 9p documentation to describe that.
Link: http://lkml.kernel.org/r/1586193572-1375-1-git-send-email-asmadeus@codewreck.org
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
|
|
The currently minimum-supported binutils version 2.21 has the problem of
promoting symbols which are defined outside of a section into absolute.
According to Arvind:
binutils-2.21 and -2.22. An x86-64 defconfig will fail with
Invalid absolute R_X86_64_32S relocation: _etext
and after fixing that one, with
Invalid absolute R_X86_64_32S relocation: __end_of_kernel_reserve
Those two versions of binutils have a bug when it comes to handling
symbols defined outside of a section and binutils 2.23 has the proper
fix, see: https://sourceware.org/legacy-ml/binutils/2012-06/msg00155.html
Therefore, up to the fixed version directly, skipping the broken ones.
Currently shipping distros already have the fixed binutils version so
there should be no breakage resulting from this.
For more details about the whole thing, see the thread in Link.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200110202349.1881840-1-nivedita@alum.mit.edu
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Fixe the alignment in the ACPI block diagram (RST table)
by adding missing spaces
Signed-off-by: Vilhelm Prytz <vilhelm@prytznet.se>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Pull drm fixes from Dave Airlie:
"This is a set of fixes that have queued up, I think I might have
another pull with some more before rc1 but I'd like to dequeue what I
have now just in case Easter is more eggciting that expected.
The main thing in here is a fix for a longstanding nouveau power
management issues on certain laptops, it should help runtime
suspend/resume for a lot of people.
There is also a reverted patch for some drm_mm behaviour in atomic
contexts.
Summary:
core:
- revert drm_mm atomic patch
- dt binding fixes
fbcon:
- null ptr error fix
i915:
- GVT fixes
nouveau:
- runpm fix
- svm fixes
amdgpu:
- HDCP fixes
- gfx10 fix
- Misc display fixes
- BACO fixes
amdkfd:
- Fix memory leak
vboxvideo:
- remove conflicting fbs
vc4:
- mode validation fix
xen:
- fix PTR_ERR usage"
* tag 'drm-next-2020-04-08' of git://anongit.freedesktop.org/drm/drm: (41 commits)
drm/nouveau/kms/nv50-: wait for FIFO space on PIO channels
drm/nouveau/nvif: protect waits against GPU falling off the bus
drm/nouveau/nvif: access PTIMER through usermode class, if available
drm/nouveau/gr/gp107,gp108: implement workaround for HW hanging during init
drm/nouveau: workaround runpm fail by disabling PCI power management on certain intel bridges
drm/nouveau/svm: remove useless SVM range check
drm/nouveau/svm: check for SVM initialized before migrating
drm/nouveau/svm: fix vma range check for migration
drm/nouveau: remove checks for return value of debugfs functions
drm/nouveau/ttm: evict other IO mappings when running out of BAR1 space
drm/amdkfd: kfree the wrong pointer
drm/amd/display: increase HDCP authentication delay
drm/amd/display: Correctly cancel future watchdog and callback events
drm/amd/display: Don't try hdcp1.4 when content_type is set to type1
drm/amd/powerplay: move the ASIC specific nbio operation out of smu_v11_0.c
drm/amd/powerplay: drop redundant BIF doorbell interrupt operations
drm/amd/display: Fix dcn21 num_states
drm/amd/display: Enable BT2020 in COLOR_ENCODING property
drm/amd/display: LFC not working on 2.0x range monitors (v2)
drm/amd/display: Support plane level CTM
...
|
|
Pull input updates from Dmitry Torokhov:
"An update to the Goodix touchscreen driver to enable it work properly
on various Bay Trail and Cherry Trail devices, and a few other
assorted changes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (26 commits)
Input: update SPDX tag for input-event-codes.h
Input: i8042 - add Acer Aspire 5738z to nomux list
Input: goodix - fix compilation when ACPI support is disabled
dt-bindings: touchscreen: Convert edt-ft5x06 to json-schema
Input: of_touchscreen - explicitly choose axis
Input: goodix - support gt9147 touchpanel
dt-bindings: touchscreen: goodix: support of gt9147
Input: goodix - add support for Goodix GT917S
Input: goodix - use string-based chip ID
dt-bindings: input: touchscreen: add compatible string for Goodix GT917S
Input: goodix - add support for more then one touch-key
Input: goodix - fix spurious key release events
Input: goodix - try to reset the controller if the i2c-test fails
Input: goodix - restore config on resume if necessary
Input: goodix - make goodix_send_cfg() take a raw buffer as argument
Input: goodix - add minimum firmware size check
Input: goodix - save a copy of the config from goodix_read_config()
Input: goodix - move defines to above struct goodix_ts_data declaration
Input: goodix - add support for controlling the IRQ pin through ACPI methods
Input: goodix - add support for getting IRQ + reset GPIOs on Bay Trail devices
...
|
|
Pull thermal updates from Daniel Lezcano:
- Convert tsens configuration DT binding to yaml (Rajeshwari)
- Add interrupt support on the rcar sensor (Niklas Söderlund)
- Add a new Spreadtrum thermal driver (Baolin Wang)
- Add thermal binding for the fsl scu board, a new API to retrieve the
sensor id bound to the thermal zone and i.MX system controller sensor
(Anson Huang))
- Remove warning log when a deferred probe is requested on Exynos
(Marek Szyprowski)
- Add the thermal monitoring unit support for imx8mm with its DT
bindings (Anson Huang)
- Rephrase the Kconfig text for clarity (Linus Walleij)
- Use the gpio descriptor for the ti-soc-thermal (Linus Walleij)
- Align msg structure to 4 bytes for i.MX SC, fix the Kconfig
dependency, add the __may_be unused annotation for PM functions and
the COMPILE_TEST option for imx8mm (Anson Huang)
- Fix a dependency on regmap in Kconfig for qoriq (Yuantian Tang)
- Add DT binding and support for the rcar gen3 r8a77961 and improve the
error path on the rcar init function (Niklas Söderlund)
- Cleanup and improvements for the tsens Qcom sensor (Amit Kucheria)
- Improve code by removing lock and caching values in the rcar thermal
sensor (Niklas Söderlund)
- Cleanup in the qoriq drivers and add a call to
imx_thermal_unregister_legacy_cooling in the removal function (Anson
Huang)
- Remove redundant 'maxItems' in tsens and sprd DT bindings (Rob
Herring)
- Change the thermal DT bindings by making the cooling-maps optional
(Yuantian Tang)
- Add Tiger Lake support (Sumeet Pawnikar)
- Use scnprintf() for avoiding potential buffer overflow (Takashi Iwai)
- Make pkg_temp_lock a raw_spinlock_t(Clark Williams)
- Fix incorrect data types by changing them to signed on i.MX SC (Anson
Huang)
- Replace zero-length array with flexible-array member (Gustavo A. R.
Silva)
- Add support for i.MX8MP in the driver and in the DT bindings (Anson
Huang)
- Fix return value of the cpufreq_set_cur_state() function (Willy
Wolff)
- Remove abusing and scary WARN_ON in the cpufreq cooling device
(Daniel Lezcano)
- Fix build warning of incorrect argument type reported by sparse on
imx8mm (Anson Huang)
- Fix stub for the devfreq cooling device (Martin Blumenstingl)
- Fix cpu idle cooling documentation (Sergey Vidishev)
* tag 'thermal-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (52 commits)
Documentation: cpu-idle-cooling: Fix diagram for 33% duty cycle
thermal: devfreq_cooling: inline all stubs for CONFIG_DEVFREQ_THERMAL=n
thermal: imx8mm: Fix build warning of incorrect argument type
thermal/drivers/cpufreq_cooling: Remove abusing WARN_ON
thermal/drivers/cpufreq_cooling: Fix return of cpufreq_set_cur_state
thermal: imx8mm: Add i.MX8MP support
dt-bindings: thermal: imx8mm-thermal: Add support for i.MX8MP
thermal: qcom: tsens.h: Replace zero-length array with flexible-array member
thermal: imx_sc_thermal: Fix incorrect data type
thermal: int340x_thermal: Use scnprintf() for avoiding potential buffer overflow
thermal: int340x: processor_thermal: Add Tiger Lake support
thermal/x86_pkg_temp: Make pkg_temp_lock a raw_spinlock_t
dt-bindings: thermal: make cooling-maps property optional
dt-bindings: thermal: qcom-tsens: Remove redundant 'maxItems'
dt-bindings: thermal: sprd: Remove redundant 'maxItems'
thermal: imx: Calling imx_thermal_unregister_legacy_cooling() in .remove
thermal: qoriq: Sort includes alphabetically
thermal: qoriq: Use devm_add_action_or_reset() to handle all cleanups
thermal: rcar_thermal: Remove lock in rcar_thermal_get_current_temp()
thermal: rcar_thermal: Do not store ctemp in rcar_thermal_priv
...
|
|
Pull mfd updates from Lee Jones:
"New Drivers:
- Add support for IQS620A/621/622/624/625 Azoteq IQS62X Sensors
New Device Support:
- Add support for ADC, IRQ, Regulator, RTC and WDT to Ricoh RN5T618 PMIC
- Add support for Comet Lake to Intel LPSS
New Functionality:
- Add support for Charger Detection to Spreadtrum SC27xx PMICs
- Add support for Interrupt Polarity to Dialog Semi DA9062/61 PMIC
- Add ACPI enumeration support to Diolan DLN2 USB Adaptor
Fix-ups:
- Device Tree; iqs62x, rn5t618, cros_ec_dev, stm32-lptimer, rohm,bd71837, rohm,bd71847
- I2C registration; rn5t618
- Kconfig; MFD_CPCAP, AB8500_CORE, MFD_WM8994, MFD_WM97xx, MFD_STPMIC1
- Use flexible-array members; omap-usb-tll, qcom-pm8xxx
- Remove unnecessary casts; omap-usb-host, omap-usb-tll
- Power (suspend/resume/poweroff) enhancements; rk808
- Improve error/sanity checking; dln2
- Use snprintf(); aat2870-core
Bug Fixes:
- Fix PCI IDs in intel-lpss-pci"
* tag 'mfd-next-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (33 commits)
mfd: intel-lpss: Fix Intel Elkhart Lake LPSS I2C input clock
mfd: aat2870: Use scnprintf() for avoiding potential buffer overflow
mfd: dln2: Allow to be enumerated via ACPI
mfd: da9062: Add support for interrupt polarity defined in device tree
dt-bindings: bd718x7: Yamlify and add BD71850
mfd: dln2: Fix sanity checking for endpoints
mfd: intel-lpss: Add Intel Comet Lake PCH-V PCI IDs
mfd: sc27xx: Add USB charger type detection support
dt-bindings: mfd: Document STM32 low power timer bindings
mfd: rk808: Convert RK805 to shutdown/suspend hooks
mfd: rk808: Reduce shutdown duplication
mfd: rk808: Stop using syscore ops
mfd: rk808: Ensure suspend/resume hooks always work
mfd: rk808: Always use poweroff when requested
mfd: omap: Remove useless cast for driver.name
mfd: Kconfig: Fix some misspelling of the word functionality
mfd: pm8xxx: Replace zero-length array with flexible-array member
mfd: omap-usb-tll: Replace zero-length array with flexible-array member
mfd: cpcap: Fix compile if MFD_CORE is not selected
mfd: cros_ec: Check DT node for usbpd-notify add
...
|
|
This property allows the gpr register bit to be defined
for wake on lan support.
Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Reviewed-by: Fugang Duan <fugang.duan@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A bunch of fixes to avoid null pointer dereference in fbcon, fix a return
in xen, some DT bindings fixes, a vc4 issue with 1920x1200 mode validation,
and a conflicting framebuffer in vboxvideo.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200404090057.a3m7uw6tavwtcyon@gilmour.lan
|
|
Merge more updates from Andrew Morton:
- a lot more of MM, quite a bit more yet to come: (memcg, pagemap,
vmalloc, pagealloc, migration, thp, ksm, madvise, virtio,
userfaultfd, memory-hotplug, shmem, rmap, zswap, zsmalloc, cleanups)
- various other subsystems (procfs, misc, MAINTAINERS, bitops, lib,
checkpatch, epoll, binfmt, kallsyms, reiserfs, kmod, gcov, kconfig,
ubsan, fault-injection, ipc)
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (158 commits)
ipc/shm.c: make compat_ksys_shmctl() static
ipc/mqueue.c: fix a brace coding style issue
lib/Kconfig.debug: fix a typo "capabilitiy" -> "capability"
ubsan: include bug type in report header
kasan: unset panic_on_warn before calling panic()
ubsan: check panic_on_warn
drivers/misc/lkdtm/bugs.c: add arithmetic overflow and array bounds checks
ubsan: split "bounds" checker from other options
ubsan: add trap instrumentation option
init/Kconfig: clean up ANON_INODES and old IO schedulers options
kernel/gcov/fs.c: replace zero-length array with flexible-array member
gcov: gcc_3_4: replace zero-length array with flexible-array member
gcov: gcc_4_7: replace zero-length array with flexible-array member
kernel/kmod.c: fix a typo "assuems" -> "assumes"
reiserfs: clean up several indentation issues
kallsyms: unexport kallsyms_lookup_name() and kallsyms_on_each_symbol()
samples/hw_breakpoint: drop use of kallsyms_lookup_name()
samples/hw_breakpoint: drop HW_BREAKPOINT_R when reporting writes
fs/binfmt_elf.c: don't free interpreter's ELF pheaders on common path
fs/binfmt_elf.c: allocate less for static executable
...
|
|
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've mainly focused on fixing bugs and addressing
issues in recently introduced compression support.
Enhancement:
- add zstd support, and set LZ4 by default
- add ioctl() to show # of compressed blocks
- show mount time in debugfs
- replace rwsem with spinlock
- avoid lock contention in DIO reads
Some major bug fixes wrt compression:
- compressed block count
- memory access and leak
- remove obsolete fields
- flag controls
Other bug fixes and clean ups:
- fix overflow when handling .flags in inode_info
- fix SPO issue during resize FS flow
- fix compression with fsverity enabled
- potential deadlock when writing compressed pages
- show missing mount options"
* tag 'f2fs-for-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (66 commits)
f2fs: keep inline_data when compression conversion
f2fs: fix to disable compression on directory
f2fs: add missing CONFIG_F2FS_FS_COMPRESSION
f2fs: switch discard_policy.timeout to bool type
f2fs: fix to verify tpage before releasing in f2fs_free_dic()
f2fs: show compression in statx
f2fs: clean up dic->tpages assignment
f2fs: compress: support zstd compress algorithm
f2fs: compress: add .{init,destroy}_decompress_ctx callback
f2fs: compress: fix to call missing destroy_compress_ctx()
f2fs: change default compression algorithm
f2fs: clean up {cic,dic}.ref handling
f2fs: fix to use f2fs_readpage_limit() in f2fs_read_multi_pages()
f2fs: xattr.h: Make stub helpers inline
f2fs: fix to avoid double unlock
f2fs: fix potential .flags overflow on 32bit architecture
f2fs: fix NULL pointer dereference in f2fs_verity_work()
f2fs: fix to clear PG_error if fsverity failed
f2fs: don't call fscrypt_get_encryption_info() explicitly in f2fs_tmpfile()
f2fs: don't trigger data flush in foreground operation
...
|
|
In writing_usb_driver.rst:
Remove link to https://www.qbik.ch/usb/devices/ since it seems to be inactive since 2013
Update link to linux-usb mailing list archive
Signed-off-by: Joakim Lönnegren <joakimlonnegren@gmail.com>
Link: https://lore.kernel.org/r/20200312201354.285839-1-joakimlonnegren@gmail.om
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Delete identically named subsection to fix Documentation warning:
Documentation/driver-api/w1.rst:11: \
WARNING: duplicate label driver-api/w1:w1 api internal to the kernel, \
other instance in Documentation/driver-api/w1.rst
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20200330060132.7773-1-lukas.bulwahn@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Pull OpenRISC updates from Stafford Horne:
"A few cleanups all over the place, things of note:
- Enable the clone3 syscall
- Remove CONFIG_CROSS_COMPILE from Krzysztof Kozlowski
- Update to use mmgrab from Julia Lawall"
* tag 'for-linus' of git://github.com/openrisc/linux:
openrisc: Remove obsolete show_trace_task function
openrisc: Cleanup copy_thread_tls docs and comments
openrisc: Enable the clone3 syscall
openrisc: Convert copy_thread to copy_thread_tls
openrisc: use mmgrab
openrisc: configs: Cleanup CONFIG_CROSS_COMPILE
|
|
"On x86" and "On SPARC" are now definition list terms, like
"On PowerPC", "On other", and "On all".
The Credits list is now a bulleted list, like lots of Credits lists in
other files. This prevents the list from becoming a single long,
unpunctuated sentence in the generated documentation.
I also did a couple of other tiny readability improvements to the
"How do I use the magic SysRq key?" section while I was there.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Link: https://lore.kernel.org/r/20200403170701.10852-1-hi@alyssa.is
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Fix remaining broken references in kernel-parameters.txt.
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Jimmy Assarsson <jimmyassarsson@gmail.com>
Link: https://lore.kernel.org/r/20200402172614.3020-2-jimmyassarsson@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
x86/mpx was removed in commit 45fc24e89b7c
("x86/mpx: remove MPX from arch/x86"), this removes the documentation of
parameter nompx.
Fixes: 45fc24e89b7c ("x86/mpx: remove MPX from arch/x86")
Signed-off-by: Jimmy Assarsson <jimmyassarsson@gmail.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20200402172614.3020-1-jimmyassarsson@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
- 'structer' replaced with 'structure'
Signed-off-by: Vilhelm Prytz <vilhelm@prytznet.se>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
Linus Torvalds
Cambda Zhu
Johan Jonker
Ard Biesheuvel
Randy Dunlap
Jakub Kicinski
Pali Rohár
Eric Biggers
Roman Gushchin
Alexandru Ardelean
Lothar Rubusch
Masahiro Yamada
Mike Marshall
Takashi Iwai
Fangrui Song
Dominique Martinet
Borislav Petkov
Vilhelm Prytz
Martin Fuzzey
Dave Airlie
Joakim Lönnegren
Lukas Bulwahn
Alyssa Ross
Jimmy Assarsson