aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-06-10arm64: dts: amlogic: correct gpio-keys propertiesKrzysztof Kozlowski1-3/+1
gpio-keys children do not use unit addresses. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220609113911.380368-6-krzysztof.kozlowski@linaro.org
2021-02-03arm64: dts: meson: shorten audio card names for alsa compatibilityChristian Hewitt1-1/+1
This patch shortens all audio card model names by dropping the SoC prefix (for conformity) and rewording those that are still longer than alsa's 15 character name limit [0] to avoid userspace config issues. [0] https://github.com/torvalds/linux/blob/master/Documentation/sound/alsa-configuration.rst#common-parameters-for-top-sound-card-modules Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20210101063737.26635-1-christianshewitt@gmail.com
2020-12-07arm64: dts: meson: add audio playback to a95xChristian Hewitt1-0/+40
Add initial audio support limited to HDMI i2s. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20201203060023.9454-2-christianshewitt@gmail.com
2020-04-29arm64: dts: meson: fix leds subnodes nameNeil Armstrong1-1/+1
Fix the leds subnode names to match (^led-[0-9a-f]$|led) It fixes: meson-g12b-a311d-khadas-vim3.dt.yaml: leds: 'red', 'white' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-g12b-s922x-khadas-vim3.dt.yaml: leds: 'red', 'white' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-g12b-odroid-n2.dt.yaml: leds: 'blue' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-gxbb-nanopi-k2.dt.yaml: leds: 'stat' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-gxbb-nexbox-a95x.dt.yaml: leds: 'blue' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-gxbb-odroidc2.dt.yaml: leds: 'blue' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-gxbb-vega-s95-pro.dt.yaml: leds: 'blue' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-gxbb-vega-s95-meta.dt.yaml: leds: 'blue' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-gxbb-vega-s95-telos.dt.yaml: leds: 'blue' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-gxbb-wetek-hub.dt.yaml: leds: 'system' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-gxbb-wetek-play2.dt.yaml: leds: 'ethernet', 'system', 'wifi' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-gxl-s905x-libretech-cc.dt.yaml: leds: 'blue', 'system' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-gxl-s905d-libretech-pc.dt.yaml: leds: 'blue', 'green' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-gxm-rbox-pro.dt.yaml: leds: 'blue', 'red' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-gxm-s912-libretech-pc.dt.yaml: leds: 'blue', 'green' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-sm1-sei610.dt.yaml: leds: 'bluetooth' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-sm1-khadas-vim3l.dt.yaml: leds: 'red', 'white' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200326165958.19274-6-narmstrong@baylibre.com
2019-10-03arm64: dts: meson-gxbb-nexbox-a95x: add keep-power-in-suspend property in SDIO nodeNeil Armstrong1-0/+3
The WiFi firmware requires that the power is kept enabled while in suspend mode. Add the keep-power-in-suspend property in the SDIO node to specify that the power must be kept when entering in a system wide suspend state. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-29arm64: dts: meson: fix boards regulators states formatNeil Armstrong1-2/+2
This fixes the following DT schemas check errors: meson-gxbb-odroidc2.dt.yaml: gpio-regulator-tf_io: states:0: Additional items are not allowed (1800000, 1 were unexpected) meson-gxbb-odroidc2.dt.yaml: gpio-regulator-tf_io: states:0: [3300000, 0, 1800000, 1] is too long meson-gxbb-nexbox-a95x.dt.yaml: gpio-regulator: states:0: Additional items are not allowed (3300000, 1 were unexpected) meson-gxbb-nexbox-a95x.dt.yaml: gpio-regulator: states:0: [1800000, 0, 3300000, 1] is too long meson-gxbb-p200.dt.yaml: gpio-regulator: states:0: Additional items are not allowed (3300000, 1 were unexpected) meson-gxbb-p200.dt.yaml: gpio-regulator: states:0: [1800000, 0, 3300000, 1] is too long meson-gxl-s905x-hwacom-amazetv.dt.yaml: gpio-regulator: states:0: Additional items are not allowed (3300000, 1 were unexpected) meson-gxl-s905x-hwacom-amazetv.dt.yaml: gpio-regulator: states:0: [1800000, 0, 3300000, 1] is too long meson-gxbb-p201.dt.yaml: gpio-regulator: states:0: Additional items are not allowed (3300000, 1 were unexpected) meson-gxbb-p201.dt.yaml: gpio-regulator: states:0: [1800000, 0, 3300000, 1] is too long meson-g12b-odroid-n2.dt.yaml: gpio-regulator-tf_io: states:0: Additional items are not allowed (1800000, 1 were unexpected) meson-g12b-odroid-n2.dt.yaml: gpio-regulator-tf_io: states:0: [3300000, 0, 1800000, 1] is too long meson-gxl-s905x-nexbox-a95x.dt.yaml: gpio-regulator: states:0: Additional items are not allowed (3300000, 1 were unexpected) meson-gxl-s905x-nexbox-a95x.dt.yaml: gpio-regulator: states:0: [1800000, 0, 3300000, 1] is too long Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-19arm64: dts: meson: use the generic Ethernet PHY reset GPIO bindingsMartin Blumenstingl1-4/+4
The snps,reset-gpio bindings are deprecated in favour of the generic "Ethernet PHY reset" bindings. Replace snps,reset-gpio from the &ethmac node with reset-gpios in the ethernet-phy node. The old snps,reset-active-low property is now encoded directly as GPIO flag inside the reset-gpios property. snps,reset-delays-us is converted to reset-assert-us and reset-deassert-us. reset-assert-us is the second cell from snps,reset-delays-us while reset-deassert-us was the third cell. Instead of blindly copying the old values (which seems strange since they gave the PHY one second to come out of reset) over this also updates the delays based on the datasheets: - the Realtek RTL8211F PHY needs a 10ms assert delay (the datasheet mentions: "For a complete PHY reset, this pin must be asserted low for at least 10ms") and a 30ms deassert delay (the datasheet mentions: "Wait for a further 30ms (for internal circuits settling time) before accessing the PHY register". This applies to the following boards: GXBB NanoPi K2, GXBB Odroid-C2, GXBB Vega S95 variants, GXBB Wetek variants, GXL P230, GXM Khadas VIM2, GXM Nexbox A1, GXM Q200, GXM RBox Pro boards. - the ICPlus IP101GR PHY needs a 10ms assert delay (the datasheet mentions: "Trst | Reset period | 10ms") and a deassert delay of 10ms as well (the datasheet mentions: "Tclk_MII_rdy | MII/RMII clock output ready after reset released | 10ms"). This applies to the GXBB Nexbox A95X board. - the Micrel KSZ9031 seems to require a 100us delay but use the same (seemingly safe) values from RTL8211F due to lack of a board to verify this. This applies to the GXBB P200 board. The GXBB P201 board is left out from this conversion because it doesn't have a dedicated PHY node (because it's not clear which PHY is used on that board). Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-05-21arm64: dts: meson: fix mmc v2 chips max frequenciesJerome Brunet1-1/+1
According the datasheets, emmc v2 chips (gxbb and gxl) don't support more that 100Mhz in UHS-1 SD modes and HS in SDIO. Align the max-frequency to 100MHz for UHS-1 and 50MHz for HS Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-01-14arm64: dts: meson: Fix mmc cd-gpios polarityLoys Ollivier1-2/+1
Commit 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree") changed the behavior of "cd-inverted" to follow the device tree bindings specification: According to SDHCI standard, CD lines are specified as "active low". Using the "cd-inverted" property means that the CD line is "active high". Fix the SD card description for meson by setting the cd-gpios as "active low", according to the boards specifications, and dropping the "cd-inverted" property. Fixes: 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree") Signed-off-by: Loys Ollivier <lollivier@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-03-07ARM64: dts: amlogic: Convert to new-style SPDX license identifiersNeil Armstrong1-38/+1
Move the SPDX-License-Identifier lines to the top and drop the license splat. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-02-12ARM64: dts: meson: accept MAC addr from u-boot environmentJorge Ramirez-Ortiz1-0/+1
Extend configuring the MAC address from u-boot to all meson boards. I didn't test this changeset but having checked libretech's u-boot tree I believe it should just work. Signed-off-by: Jorge Ramirez-Ortiz <jramirez@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-10-11ARM64: dts: meson-gxbb-nexbox-a95x: Enable USB NodesPeter Korsgaard1-0/+29
Enable both gxbb USB controllers and add a 5V regulator for the OTG port VBUS, similar to p20x. Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-10-11ARM64: dts: meson-gxl: Take eMMC data strobe out of eMMC pinsNeil Armstrong1-1/+1
Since the Data Strobe pin is optional, take it out of the default eMMC pins and add a separate entry. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-09-05ARM64: dts: meson: add mmc clk gate pinsJerome Brunet1-4/+7
Add the pinctrl to switch mmc clk pins in gpio (pulled down) mode. This is necessary to be able to gate the clk outside of the SoC while keeping it running in the controller Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-09-05ARM64: dts: meson: remove cap-sd-highspeed from emmc nodesJerome Brunet1-1/+0
It does not make much sense to define cap-sd-highspeed in the emmc nodes Just remove it. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-08-22ARM64: dts: meson-gx: Add AO CEC nodesNeil Armstrong1-0/+7
This patch adds the AO CEC node in all the HDMI enabled boards DTS. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-05-17arm64: dts: meson-gxbb-nexbox-a95x: Fix node orderAndreas Färber1-26/+26
Sort nodes referenced by label alphabetically. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-04-04ARM64: dts: meson-gx: Add support for HDMI outputNeil Armstrong1-0/+23
Add HDMI output and connector nodes. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-03-06ARM64: dts: meson-gxbb-nexbox-a95x: add the ethernet PHY's reset GPIOMartin Blumenstingl1-0/+17
This resets the ethernet PHY during boot to get the PHY into a "clean" state. While here also specify the phy-handle of the ethmac node to make the PHY configuration similar to the one we have on GXL devices. This will allow us to specify OF-properties for the PHY itself. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-01-03ARM64: dts: meson-gx: Add Graphic Controller nodesNeil Armstrong1-0/+16
Add Video Processing Unit and CVBS Output nodes, and enable CVBS on selected boards. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-10-20ARM64: dts: meson-gxbb: Add MMC nodes to Nexbox A95xNeil Armstrong1-0/+122
Add support for eMMC/SD/SDIO on the Nexbox A95x. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-10-18ARM64: dts: meson-gxbb: Add rmii pinctrl node and rename rgmii nodeNeil Armstrong1-1/+2
For boards only supporting 10/100 ethernet over a RMII PHY link, add a separate pinctrl node. By the way, rename the existing node to rgmii specific naming in all boards dts. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-10-18ARM64: dts: meson-gxbb: Add support for the Nexbox A95X BoardNeil Armstrong1-0/+108
Add support for the S905 (GXBB) version of the Nexbox A95X. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.