aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/arch/powerpc/kernel/head_40x.S (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2019-05-03powerpc/40x: Don't use SPRN_SPRG_SCRATCH2 in EXCEPTION_PROLOGChristophe Leroy1-12/+9
Unlike said in the comment, r1 is not reused by the critical exception handler, as it uses a dedicated critirq_ctx stack. Decrementing r1 early is then unneeded. Should the above be valid, the code is crap buggy anyway as r1 gets some intermediate values that would jeopardise the whole process (for instance after mfspr r1,SPRN_SPRG_THREAD) Using SPRN_SPRG_SCRATCH2 to save r1 is then not needed, r11 can be used instead. This avoids one mtspr and one mfspr and makes the prolog closer to what's done on 6xx and 8xx. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/32: make the 6xx/8xx EXC_XFER_TEMPLATE() similar to the 40x/booke oneChristophe Leroy1-7/+6
6xx/8xx EXC_XFER_TEMPLATE() macro adds a i##n symbol which is unused and can be removed. 40x and booke EXC_XFER_TEMPLATE() macros takes msr from the caller while the 6xx/8xx version uses only MSR_KERNEL as msr value. This patch modifies the 6xx/8xx version to make it similar to the 40x and booke versions. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/32: move LOAD_MSR_KERNEL() into head_32.h and use itChristophe Leroy2-9/+15
As preparation for using head_32.h for head_40x.S, move LOAD_MSR_KERNEL() there and use it to load r10 with MSR_KERNEL value. In the mean time, this patch modifies it so that it takes into account the size of the passed value to determine if 'li' can be used or if 'lis/ori' is needed instead of using the size of MSR_KERNEL. This is done by using gas macro. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/32: Refactor EXCEPTION entry macros for head_8xx.S and head_32.SChristophe Leroy3-193/+122
EXCEPTION_PROLOG is similar in head_8xx.S and head_32.S This patch creates head_32.h and moves EXCEPTION_PROLOG macro into it. It also converts it from a GCC macro to a GAS macro in order to ease refactorisation with 40x later, since GAS macros allows the use of #ifdef/#else/#endif inside it. And it also has the advantage of not requiring the uggly "; \" at the end of each line. This patch also moves EXCEPTION() and EXC_XFER_XXXX() macros which are also similar while adding START_EXCEPTION() out of EXCEPTION(). Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/mm: print hash info in a helperChristophe Leroy4-23/+26
Reduce #ifdef mess by defining a helper to print hash info at startup. In the meantime, remove the display of hash table address to reduce leak of non necessary information. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/32s: don't try to print hash table address.Christophe Leroy1-2/+2
Due to %p, (ptrval) is printed in lieu of the hash table address. showing the hash table address isn't an operationnal need so just don't print it. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/32s: drop Hash_endChristophe Leroy2-4/+2
Hash_end has never been used, drop it. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/32s: map kasan zero shadow with PAGE_READONLY instead of PAGE_KERNEL_ROChristophe Leroy1-2/+8
For hash32, the zero shadow page gets mapped with PAGE_READONLY instead of PAGE_KERNEL_RO, because the PP bits don't provide a RO kernel, so PAGE_KERNEL_RO is equivalent to PAGE_KERNEL. By using PAGE_READONLY, the page is RO for both kernel and user, but this is not a security issue as it contains only zeroes. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/32s: set up an early static hash table for KASAN.Christophe Leroy3-26/+68
KASAN requires early activation of hash table, before memblock() functions are available. This patch implements an early hash_table statically defined in __initdata. During early boot, a single page table is used. For hash32, when doing the final init, one page table is allocated for each PGD entry because of the _PAGE_HASHPTE flag which can't be common to several virt pages. This is done after memblock get available but before switching to the final hash table, otherwise there are issues with TLB flushing due to the shared entries. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/32s: move hash code patching out of MMU_init_hw()Christophe Leroy3-14/+26
For KASAN, hash table handling will be activated early for accessing to KASAN shadow areas. In order to avoid any modification of the hash functions while they are still used with the early hash table, the code patching is moved out of MMU_init_hw() and put close to the big-bang switch to the final hash table. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/32: Add KASAN supportChristophe Leroy11-0/+188
This patch adds KASAN support for PPC32. The following patch will add an early activation of hash table for book3s. Until then, a warning will be raised if trying to use KASAN on an hash 6xx. To support KASAN, this patch initialises that MMU mapings for accessing to the KASAN shadow area defined in a previous patch. An early mapping is set as soon as the kernel code has been relocated at its definitive place. Then the definitive mapping is set once paging is initialised. For modules, the shadow area is allocated at module_alloc(). Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc: disable KASAN instrumentation on early/critical files.Christophe Leroy6-0/+36
All files containing functions run before kasan_early_init() is called must have KASAN instrumentation disabled. For those file, branch profiling also have to be disabled otherwise each if () generates a call to ftrace_likely_update(). Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/32: prepare shadow area for KASANChristophe Leroy5-0/+38
This patch prepares a shadow area for KASAN. The shadow area will be at the top of the kernel virtual memory space above the fixmap area and will occupy one eighth of the total kernel virtual memory space. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/32: make KVIRT_TOP dependent on FIXMAP_STARTChristophe Leroy2-6/+20
When we add KASAN shadow area, KVIRT_TOP can't be anymore fixed at 0xfe000000. This patch uses FIXADDR_START to define KVIRT_TOP. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/32: use memset() instead of memset_io() to zero BSSChristophe Leroy1-2/+2
Since commit 400c47d81ca38 ("powerpc32: memset: only use dcbz once cache is enabled"), memset() can be used before activation of the cache, so no need to use memset_io() for zeroing the BSS. Acked-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc: don't use direct assignation during early boot.Christophe Leroy2-5/+18
In kernel/cputable.c, explicitly use memcpy() instead of *y = *x; This will allow GCC to replace it with __memcpy() when KASAN is selected. Acked-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/prom_init: don't use string functions from lib/Christophe Leroy2-42/+171
When KASAN is active, the string functions in lib/ are doing the KASAN checks. This is too early for prom_init. This patch implements dedicated string functions for prom_init, which will be compiled in with KASAN disabled. Size of prom_init before the patch: text data bss dec hex filename 12060 488 6960 19508 4c34 arch/powerpc/kernel/prom_init.o Size of prom_init after the patch: text data bss dec hex filename 12460 488 6960 19908 4dc4 arch/powerpc/kernel/prom_init.o This increases the size of prom_init a bit, but as prom_init is in __init section, it is freed after boot anyway. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc: remove CONFIG_CMDLINE #ifdef messChristophe Leroy2-9/+6
This patch makes CONFIG_CMDLINE defined at all time. It avoids having to enclose related code inside #ifdef CONFIG_CMDLINE Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc: prepare string/mem functions for KASANChristophe Leroy10-13/+82
CONFIG_KASAN implements wrappers for memcpy() memmove() and memset() Those wrappers are doing the verification then call respectively __memcpy() __memmove() and __memset(). The arches are therefore expected to rename their optimised functions that way. For files on which KASAN is inhibited, #defines are used to allow them to directly call optimised versions of the functions without going through the KASAN wrappers. See commit 393f203f5fd5 ("x86_64: kasan: add interceptors for memset/memmove/memcpy functions") for details. Other string / mem functions do not (yet) have kasan wrappers, we therefore have to fallback to the generic versions when KASAN is active, otherwise KASAN checks will be skipped. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> [mpe: Fixups to keep selftests working] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/32: Move early_init() in a separate fileChristophe Leroy3-29/+37
In preparation of KASAN, move early_init() into a separate file in order to allow deactivation of KASAN for that function. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/mm: refactor pgd_alloc() and pgd_free() on nohashChristophe Leroy3-22/+12
pgd_alloc() and pgd_free() are identical on nohash 32 and 64. Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/mm: refactor pmd_pgtable()Christophe Leroy5-11/+5
pmd_pgtable() is identical on the 4 subarches, refactor it. Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/mm: refactor pgtable freeing functions on nohashChristophe Leroy3-86/+44
pgtable_free() and others are identical on nohash/32 and 64, so move them into asm/nohash/pgalloc.h Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/mm: Only keep one version of pmd_populate() functions on nohash/32Christophe Leroy1-20/+8
Use IS_ENABLED(CONFIG_BOOKE) to make single versions of pmd_populate() and pmd_populate_kernel() Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/mm: refactor definition of pgtable_cache[]Christophe Leroy5-86/+21
pgtable_cache[] is the same for the 4 subarches, lets make it common. Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/mm: refactor pte_alloc_one() and pte_free() families definition.Christophe Leroy5-97/+25
Functions pte_alloc_one(), pte_alloc_one_kernel(), pte_free(), pte_free_kernel() are identical for the four subarches. This patch moves their definition in a common place. Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/mm: inline pte_alloc_one_kernel() and pte_alloc_one() on PPC32Christophe Leroy3-16/+24
pte_alloc_one_kernel() and pte_alloc_one() are simple calls to pte_fragment_alloc(), so they are good candidates for inlining as already done on PPC64. Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/mm: don't use pte_alloc_kernel() until slab is available on PPC32Christophe Leroy1-6/+28
In the same way as PPC64, implement early allocation functions and avoid calling pte_alloc_kernel() before slab is available. Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/book3e: move early_alloc_pgtable() to init sectionChristophe Leroy1-2/+2
early_alloc_pgtable() is only used during init. Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/Kconfig: select PPC_MM_SLICES from subarch typeChristophe Leroy1-2/+2
Lets select PPC_MM_SLICES from the subarch config item instead of doing it via defaults declaration in the PPC_MM_SLICES item itself. Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/mm: get rid of nohash/32/mmu.h and nohash/64/mmu.hChristophe Leroy4-33/+14
Those files have no real added values, especially the 64 bit which only includes the common book3e mmu.h which is also included from 32 bits side. So lets do the final inclusion directly from nohash/mmu.h Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/mm: move pgtable_t in asm/mmu.hChristophe Leroy5-24/+3
pgtable_t is now identical for all subarches, move it to the top level asm/mmu.h Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/mm: convert Book3E 64 to pte_fragmentChristophe Leroy5-30/+17
Book3E 64 is the only subarch not using pte_fragment. In order to allow refactorisation, this patch converts it to pte_fragment. Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/mm: drop __bad_pte()Christophe Leroy2-4/+0
This has never been called (since Kernel has been in git at least), drop it. Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/mm: flatten function __find_linux_pte() step 3Christophe Leroy1-49/+49
__find_linux_pte() is full of if/else which is hard to follow allthough the handling is pretty simple. Previous patches left a { } block. This patch removes it. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/mm: flatten function __find_linux_pte() step 2Christophe Leroy1-32/+30
__find_linux_pte() is full of if/else which is hard to follow allthough the handling is pretty simple. Previous patch left { } blocks. This patch removes the first one by shifting its content to the left. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/mm: flatten function __find_linux_pte() step 1Christophe Leroy1-10/+22
__find_linux_pte() is full of if/else which is hard to follow allthough the handling is pretty simple. This patch flattens the function by getting rid of as much if/else as possible. In order to ease the review, this is done in three steps. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/mm: cleanup remaining ifdef mess in hugetlbpage.cChristophe Leroy1-7/+5
Only 3 subarches support huge pages. So when it is either 2 of them, it is not the third one. And mmu_has_feature() is known by all subarches so IS_ENABLED() can be used instead of #ifdef Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/mm: cleanup HPAGE_SHIFT setupChristophe Leroy5-24/+30
Only book3s/64 may select default among several HPAGE_SHIFT at runtime. 8xx always defines 512K pages as default FSL_BOOK3E always defines 4M pages as default This patch limits HUGETLB_PAGE_SIZE_VARIABLE to book3s/64 moves the definitions in subarches files. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/mm: move hugetlb_disabled into asm/hugetlb.hChristophe Leroy4-1/+4
No need to have this in asm/page.h, move it into asm/hugetlb.h Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/mm: cleanup ifdef mess in add_huge_page_size()Christophe Leroy4-34/+43
Introduce a subarch specific helper check_and_get_huge_psize() to check the huge page sizes and cleanup the ifdef mess in add_huge_page_size() Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/mm: add a helper to populate hugepdChristophe Leroy4-19/+20
This patchs adds a subarch helper to populate hugepd. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/mm: split asm/hugetlb.h into dedicated subarch filesChristophe Leroy4-83/+106
Three subarches support hugepages: - fsl book3e - book3s/64 - 8xx This patch splits asm/hugetlb.h to reduce the #ifdef mess. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/mm: make gup_hugepte() staticChristophe Leroy2-22/+19
gup_huge_pd() is the only user of gup_hugepte() and it is located in the same file. This patch moves gup_huge_pd() after gup_hugepte() and makes gup_hugepte() static. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/mm: make hugetlbpage.c depend on CONFIG_HUGETLB_PAGEChristophe Leroy2-6/+1
The only function in hugetlbpage.c which doesn't depend on CONFIG_HUGETLB_PAGE is gup_hugepte(), and this function is only called from gup_huge_pd() which depends on CONFIG_HUGETLB_PAGE so all the content of hugetlbpage.c depends on CONFIG_HUGETLB_PAGE. This patch modifies Makefile to only compile hugetlbpage.c when CONFIG_HUGETLB_PAGE is set. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/mm: move __find_linux_pte() out of hugetlbpage.cChristophe Leroy2-103/+104
__find_linux_pte() is the only function in hugetlbpage.c which is compiled in regardless on CONFIG_HUGETLBPAGE This patch moves it in pgtable.c. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/book3e: hugetlbpage is only for CONFIG_PPC_FSL_BOOK3EChristophe Leroy2-29/+20
As per Kconfig.cputype, only CONFIG_PPC_FSL_BOOK3E gets to select SYS_SUPPORTS_HUGETLBFS so simplify accordingly. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/64: only book3s/64 supports CONFIG_PPC_64K_PAGESChristophe Leroy9-72/+5
CONFIG_PPC_64K_PAGES cannot be selected by nohash/64. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/book3e: drop mmu_get_tsize()Christophe Leroy1-5/+0
This function is not used anymore, drop it. Fixes: b42279f0165c ("powerpc/mm/nohash: MM_SLICE is only used by book3s 64") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/mm: define subarch SLB_ADDR_LIMIT_DEFAULTChristophe Leroy5-9/+7
This patch defines a subarch specific SLB_ADDR_LIMIT_DEFAULT to remove the #ifdefs around the setup of mm->context.slb_addr_limit It also generalises the use of mm_ctx_set_slb_addr_limit() helper. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.