| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The new RDPMC enhancement, metrics clear mode, is to clear the
PERF_METRICS-related resources as well as the fixed-function performance
monitoring counter 3 after the read is performed. It is available for
ring 3. The feature is enumerated by the
IA32_PERF_CAPABILITIES.RDPMC_CLEAR_METRICS[bit 19]. To enable the
feature, the IA32_FIXED_CTR_CTRL.METRICS_CLEAR_EN[bit 14] must be set.
Two ways were considered to enable the feature.
- Expose a knob in the sysfs globally. One user may affect the
measurement of other users when changing the knob. The solution is
dropped.
- Introduce a new event format, metrics_clear, for the slots event to
disable/enable the feature only for the current process. Users can
utilize the feature as needed.
The latter solution is implemented in the patch.
The current KVM doesn't support the perf metrics yet. For
virtualization, the feature can be enabled later separately.
Suggested-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20241211160318.235056-1-kan.liang@linux.intel.com
|
|
The released OCR and FRONTEND events utilized more bits on Lunar Lake
p-core. The corresponding mask in the extra_regs has to be extended to
unblock the extra bits.
Add a dedicated intel_lnc_extra_regs.
Fixes: a932aa0e868f ("perf/x86: Add Lunar Lake and Arrow Lake support")
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20241216160252.430858-1-kan.liang@linux.intel.com
|
|
The 'x86_cpu_desc' and 'x86_cpu_id' structures are very similar.
Reduce duplicate infrastructure by moving the few users of
'x86_cpu_desc' to the much more common variant.
The existing X86_MATCH_VFM_STEPS() helper matches ranges of
steppings. Instead of introducing a single-stepping match function
which could get confusing when paired with the range, just use
the stepping min/max match helper and use min==max.
Note that this makes the table more vertically compact because
multiple entries like this:
INTEL_CPU_DESC(INTEL_SKYLAKE_X, 4, 0x00000000),
INTEL_CPU_DESC(INTEL_SKYLAKE_X, 5, 0x00000000),
INTEL_CPU_DESC(INTEL_SKYLAKE_X, 6, 0x00000000),
INTEL_CPU_DESC(INTEL_SKYLAKE_X, 7, 0x00000000),
can be consolidated down to a single stepping range.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20241213185131.8B610039%40davehans-spike.ostc.intel.com
|
|
From PMU's perspective, the new Arrow Lake U is the same as the
Meteor Lake.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20241121180526.2364759-1-kan.liang@linux.intel.com
|
|
Events with aux actions or aux sampling expect the PMI to coincide with the
event, which does not happen for large PEBS, so do not enable large PEBS in
that case.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lkml.kernel.org/r/20241022155920.17511-5-adrian.hunter@intel.com
|
|
ArrowLake-H contains 3 different uarchs, LionCove, Skymont and Crestmont.
It is different with previous hybrid processors which only contains two
kinds of uarchs.
This patch adds PMU support for ArrowLake-H processor, adds ARL-H
specific events which supports the 3 kinds of uarchs, such as
td_retiring_arl_h, and extends some existed format attributes like
offcore_rsp to make them be available to support ARL-H as well. Althrough
these format attributes like offcore_rsp have been extended to support
ARL-H, they can still support the regular hybrid platforms with 2 kinds
of uarchs since the helper hybrid_format_is_visible() would filter PMU
types and only show the format attribute for available PMUs.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Link: https://lkml.kernel.org/r/20240820073853.1974746-5-dapeng1.mi@linux.intel.com
|
|
The upcoming ARL-H hybrid processor contains 2 different atom uarchs
which have different PMU capabilities. To distinguish these atom uarchs,
CPUID.1AH.EAX[23:0] defines a native model ID which can be used to
uniquely identify the uarch of the core by combining with core type.
Thus a 3rd hybrid pmu type "hybrid_tiny" is defined to mark the 2nd
atom uarch. The helper find_hybrid_pmu_for_cpu() would compare the
hybrid pmu type and dynamically read core native id from cpu to identify
the corresponding hybrid pmu structure.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Link: https://lkml.kernel.org/r/20240820073853.1974746-4-dapeng1.mi@linux.intel.com
|
|
The BPF subsystem may capture LBR data on a counting event. However, the
current implementation assumes that LBR can/should only be used with
sampling events.
For instance, retsnoop tool ([0]) makes an extensive use of this
functionality and sets up perf event as follows:
struct perf_event_attr attr;
memset(&attr, 0, sizeof(attr));
attr.size = sizeof(attr);
attr.type = PERF_TYPE_HARDWARE;
attr.config = PERF_COUNT_HW_CPU_CYCLES;
attr.sample_type = PERF_SAMPLE_BRANCH_STACK;
attr.branch_sample_type = PERF_SAMPLE_BRANCH_KERNEL;
To limit the LBR for a sampling event is to avoid unnecessary branch
stack setup for a counting event in the sample read. Because LBR is only
read in the sampling event's overflow.
Although in most cases LBR is used in sampling, there is no HW limit to
bind LBR to the sampling mode. Allow an LBR setup for a counting event
unless in the sample read mode.
Fixes: 85846b27072d ("perf/x86: Add PERF_X86_EVENT_NEEDS_BRANCH_STACK flag")
Closes: https://lore.kernel.org/lkml/20240905180055.1221620-1-andrii@kernel.org/
Reported-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Andrii Nakryiko <andrii@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240909155848.326640-1-kan.liang@linux.intel.com
|
|
Running the ltp test cve-2015-3290 concurrently reports the following
warnings.
perfevents: irq loop stuck!
WARNING: CPU: 31 PID: 32438 at arch/x86/events/intel/core.c:3174
intel_pmu_handle_irq+0x285/0x370
Call Trace:
<NMI>
? __warn+0xa4/0x220
? intel_pmu_handle_irq+0x285/0x370
? __report_bug+0x123/0x130
? intel_pmu_handle_irq+0x285/0x370
? __report_bug+0x123/0x130
? intel_pmu_handle_irq+0x285/0x370
? report_bug+0x3e/0xa0
? handle_bug+0x3c/0x70
? exc_invalid_op+0x18/0x50
? asm_exc_invalid_op+0x1a/0x20
? irq_work_claim+0x1e/0x40
? intel_pmu_handle_irq+0x285/0x370
perf_event_nmi_handler+0x3d/0x60
nmi_handle+0x104/0x330
Thanks to Thomas Gleixner's analysis, the issue is caused by the low
initial period (1) of the frequency estimation algorithm, which triggers
the defects of the HW, specifically erratum HSW11 and HSW143. (For the
details, please refer https://lore.kernel.org/lkml/87plq9l5d2.ffs@tglx/)
The HSW11 requires a period larger than 100 for the INST_RETIRED.ALL
event, but the initial period in the freq mode is 1. The erratum is the
same as the BDM11, which has been supported in the kernel. A minimum
period of 128 is enforced as well on HSW.
HSW143 is regarding that the fixed counter 1 may overcount 32 with the
Hyper-Threading is enabled. However, based on the test, the hardware
has more issues than it tells. Besides the fixed counter 1, the message
'interrupt took too long' can be observed on any counter which was armed
with a period < 32 and two events expired in the same NMI. A minimum
period of 32 is enforced for the rest of the events.
The recommended workaround code of the HSW143 is not implemented.
Because it only addresses the issue for the fixed counter. It brings
extra overhead through extra MSR writing. No related overcounting issue
has been reported so far.
Fixes: 3a632cb229bf ("perf/x86/intel: Add simple Haswell PMU support")
Reported-by: Li Huafei <lihuafei1@huawei.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240819183004.3132920-1-kan.liang@linux.intel.com
Closes: https://lore.kernel.org/lkml/20240729223328.327835-1-lihuafei1@huawei.com/
|
|
Currently, the Sapphire Rapids and Granite Rapids share the same PMU
name, sapphire_rapids. Because from the kernel’s perspective, GNR is
similar to SPR. The only key difference is that they support different
extra MSRs. The code path and the PMU name are shared.
However, from end users' perspective, they are quite different. Besides
the extra MSRs, GNR has a newer PEBS format, supports Retire Latency,
supports new CPUID enumeration architecture, doesn't required the
load-latency AUX event, has additional TMA Level 1 Architectural Events,
etc. The differences can be enumerated by CPUID or the PERF_CAPABILITIES
MSR. They weren't reflected in the model-specific kernel setup.
But it is worth to have a distinct PMU name for GNR.
Fixes: a6742cb90b56 ("perf/x86/intel: Fix the FRONTEND encoding on GNR and MTL")
Suggested-by: Ahmad Yasin <ahmad.yasin@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20240708193336.1192217-3-kan.liang@linux.intel.com
|
|
The below error is observed on Ice Lake VM.
$ perf stat
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument)
for event (slots).
/bin/dmesg | grep -i perf may provide additional information.
In a virtualization env, the Topdown metrics and the slots event haven't
been supported yet. The guest CPUID doesn't enumerate them. However, the
current kernel unconditionally exposes the slots event and the Topdown
metrics events to sysfs, which misleads the perf tool and triggers the
error.
Hide the perf-metrics topdown events and the slots event if the
perf-metrics feature is not enumerated.
The big core of a hybrid platform can also supports the perf-metrics
feature. Fix the hybrid platform as well.
Closes: https://lore.kernel.org/lkml/CAM9d7cj8z+ryyzUHR+P1Dcpot2jjW+Qcc4CPQpfafTXN=LEU0Q@mail.gmail.com/
Reported-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Dongli Zhang <dongli.zhang@oracle.com>
Link: https://lkml.kernel.org/r/20240708193336.1192217-2-kan.liang@linux.intel.com
|
|
The architectural performance monitoring V6 supports a new range of
counters' MSRs in the 19xxH address range. They include all the GP
counter MSRs, the GP control MSRs, and the fixed counter MSRs.
The step between each sibling counter is 4. Add intel_pmu_addr_offset()
to calculate the correct offset.
Add fixedctr in struct x86_pmu to store the address of the fixed counter
0. It can be used to calculate the rest of the fixed counters.
The MSR address of the fixed counter control is not changed.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20240626143545.480761-9-kan.liang@linux.intel.com
|
|
Two new fields (the unit mask2, and the equal flag) are added in the
IA32_PERFEVTSELx MSRs. They can be enumerated by the CPUID.23H.0.EBX.
Update the config_mask in x86_pmu and x86_hybrid_pmu for the true layout
of the PERFEVTSEL.
Expose the new formats into sysfs if they are available. The umask
extension reuses the same format attr name "umask" as the previous
umask. Add umask2_show to determine/display the correct format
for the current machine.
Co-developed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20240626143545.480761-8-kan.liang@linux.intel.com
|
|
Different vendors may support different fields in EVENTSEL MSR, such as
Intel would introduce new fields umask2 and eq bits in EVENTSEL MSR
since Perfmon version 6. However, a fixed mask X86_RAW_EVENT_MASK is
used to filter the attr.config.
Introduce a new config_mask to record the real supported EVENTSEL
bitmask.
Only apply it to the existing code now. No functional change.
Co-developed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20240626143545.480761-7-kan.liang@linux.intel.com
|
|
A new PEBS data source format is introduced for the p-core of Lunar
Lake. The data source field is extended to 8 bits with new encodings.
A new layout is introduced into the union intel_x86_pebs_dse.
Introduce the lnl_latency_data() to parse the new format.
Enlarge the pebs_data_source[] accordingly to include new encodings.
Only the mem load and the mem store events can generate the data source.
Introduce INTEL_HYBRID_LDLAT_CONSTRAINT and
INTEL_HYBRID_STLAT_CONSTRAINT to mark them.
Add two new bits for the new cache-related data src, L2_MHB and MSC.
The L2_MHB is short for L2 Miss Handling Buffer, which is similar to
LFB (Line Fill Buffer), but to track the L2 Cache misses.
The MSC stands for the memory-side cache.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20240626143545.480761-6-kan.liang@linux.intel.com
|
|
The model-specific pebs_latency_data functions of ADL and MTL use the
"small" as a postfix to indicate the e-core. The postfix is too generic
for a model-specific function. It cannot provide useful information that
can directly map it to a specific uarch, which can facilitate the
development and maintenance.
Use the abbr of the uarch to rename the model-specific functions.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20240626143545.480761-5-kan.liang@linux.intel.com
|
|
From PMU's perspective, Lunar Lake and Arrow Lake are similar to the
previous generation Meteor Lake. Both are hybrid platforms, with e-core
and p-core.
The key differences include:
- The e-core supports 3 new fixed counters
- The p-core supports an updated PEBS Data Source format
- More GP counters (Updated event constraint table)
- New Architectural performance monitoring V6
(New Perfmon MSRs aliasing, umask2, eq).
- New PEBS format V6 (Counters Snapshotting group)
- New RDPMC metrics clear mode
The legacy features, the 3 new fixed counters and updated event
constraint table are enabled in this patch.
The new PEBS data source format, the architectural performance
monitoring V6, the PEBS format V6, and the new RDPMC metrics clear mode
are supported in the following patches.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20240626143545.480761-4-kan.liang@linux.intel.com
|
|
The current perf assumes that both GP and fixed counters are contiguous.
But it's not guaranteed on newer Intel platforms or in a virtualization
environment.
Use the counter mask to replace the number of counters for both GP and
the fixed counters. For the other ARCHs or old platforms which don't
support a counter mask, using GENMASK_ULL(num_counter - 1, 0) to
replace. There is no functional change for them.
The interface to KVM is not changed. The number of counters still be
passed to KVM. It can be updated later separately.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20240626143545.480761-3-kan.liang@linux.intel.com
|
|
The current perf assumes that the counters that support PEBS are
contiguous. But it's not guaranteed with the new leaf 0x23 introduced.
The counters are enumerated with a counter mask. There may be holes in
the counter mask for future platforms or in a virtualization
environment.
Store the PEBS event mask rather than the maximum number of PEBS
counters in the x86 PMU structures.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20240626143545.480761-2-kan.liang@linux.intel.com
|
|
New CPU #defines encode vendor and family as well as model.
Update INTEL_CPU_DESC() to work with vendor/family/model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20240520224620.9480-34-tony.luck%40intel.com
|
|
New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20240520224620.9480-32-tony.luck%40intel.com
|
|
Deduplicate sysfs ->show() callbacks which expose a string at a static
memory location. Use the newly introduced device_show_string() helper
in the driver core instead by declaring those sysfs attributes with
DEVICE_STRING_ATTR_RO().
No functional change intended.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/3a297850312b4ecb62d6872121de04496900f502.1713608122.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
To clean up the per CPU insanity of UP which causes sparse to be rightfully
unhappy and prevents the usage of the generic per CPU accessors on cpu_info
it is necessary to include <linux/percpu.h> into <asm/msr.h>.
Including <linux/percpu.h> into <asm/msr.h> is impossible because it ends
up in header dependency hell. The problem is that <asm/processor.h>
includes <asm/msr.h>. The inclusion of <linux/percpu.h> results in a
compile fail where the compiler cannot longer handle an include in
<asm/cpufeature.h> which references boot_cpu_data which is
defined in <asm/processor.h>.
The only reason why <asm/msr.h> is included in <asm/processor.h> are the
set/get_debugctlmsr() inlines. They are defined there because <asm/processor.h>
is such a nice dump ground for everything. In fact they belong obviously
into <asm/debugreg.h>.
Move them to <asm/debugreg.h> and fix up the resulting damage which is just
exposing the reliance on random include chains.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240304005104.454678686@linutronix.de
|
|
Pull performance events updates from Ingo Molnar:
- Add branch stack counters ABI extension to better capture the growing
amount of information the PMU exposes via branch stack sampling.
There's matching tooling support.
- Fix race when creating the nr_addr_filters sysfs file
- Add Intel Sierra Forest and Grand Ridge intel/cstate PMU support
- Add Intel Granite Rapids, Sierra Forest and Grand Ridge uncore PMU
support
- Misc cleanups & fixes
* tag 'perf-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Factor out topology_gidnid_map()
perf/x86/intel/uncore: Fix NULL pointer dereference issue in upi_fill_topology()
perf/x86/amd: Reject branch stack for IBS events
perf/x86/intel/uncore: Support Sierra Forest and Grand Ridge
perf/x86/intel/uncore: Support IIO free-running counters on GNR
perf/x86/intel/uncore: Support Granite Rapids
perf/x86/uncore: Use u64 to replace unsigned for the uncore offsets array
perf/x86/intel/uncore: Generic uncore_get_uncores and MMIO format of SPR
perf: Fix the nr_addr_filters fix
perf/x86/intel/cstate: Add Grand Ridge support
perf/x86/intel/cstate: Add Sierra Forest support
x86/smp: Export symbol cpu_clustergroup_mask()
perf/x86/intel/cstate: Cleanup duplicate attr_groups
perf/core: Fix narrow startup race when creating the perf nr_addr_filters sysfs file
perf/x86/intel: Support branch counters logging
perf/x86/intel: Reorganize attrs and is_visible
perf: Add branch_sample_call_stack
perf/x86: Add PERF_X86_EVENT_NEEDS_BRANCH_STACK flag
perf: Add branch stack counters
|
|
Pull x86 cleanups from Ingo Molnar:
- Change global variables to local
- Add missing kernel-doc function parameter descriptions
- Remove unused parameter from a macro
- Remove obsolete Kconfig entry
- Fix comments
- Fix typos, mostly scripted, manually reviewed
and a micro-optimization got misplaced as a cleanup:
- Micro-optimize the asm code in secondary_startup_64_no_verify()
* tag 'x86-cleanups-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
arch/x86: Fix typos
x86/head_64: Use TESTB instead of TESTL in secondary_startup_64_no_verify()
x86/docs: Remove reference to syscall trampoline in PTI
x86/Kconfig: Remove obsolete config X86_32_SMP
x86/io: Remove the unused 'bw' parameter from the BUILDIO() macro
x86/mtrr: Document missing function parameters in kernel-doc
x86/setup: Make relocated_ramdisk a local variable of relocate_initrd()
|
|
When commit c59a1f106f5c ("KVM: x86/pmu: Add IA32_PEBS_ENABLE
MSR emulation for extended PEBS") switched the initialization of
cpuc->guest_switch_msrs to use compound literals, it screwed up
the boolean logic:
+ u64 pebs_mask = cpuc->pebs_enabled & x86_pmu.pebs_capable;
...
- arr[0].guest = intel_ctrl & ~cpuc->intel_ctrl_host_mask;
- arr[0].guest &= ~(cpuc->pebs_enabled & x86_pmu.pebs_capable);
+ .guest = intel_ctrl & (~cpuc->intel_ctrl_host_mask | ~pebs_mask),
Before the patch, the value of arr[0].guest would have been intel_ctrl &
~cpuc->intel_ctrl_host_mask & ~pebs_mask. The intent is to always treat
PEBS events as host-only because, while the guest runs, there is no way
to tell the processor about the virtual address where to put PEBS records
intended for the host.
Unfortunately, the new expression can be expanded to
(intel_ctrl & ~cpuc->intel_ctrl_host_mask) | (intel_ctrl & ~pebs_mask)
which makes no sense; it includes any bit that isn't *both* marked as
exclude_guest and using PEBS. So, reinstate the old logic. Another
way to write it could be "intel_ctrl & ~(cpuc->intel_ctrl_host_mask |
pebs_mask)", presumably the intention of the author of the faulty.
However, I personally find the repeated application of A AND NOT B to
be a bit more readable.
This shows up as guest failures when running concurrent long-running
perf workloads on the host, and was reported to happen with rcutorture.
All guests on a given host would die simultaneously with something like an
instruction fault or a segmentation violation.
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Analyzed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Cc: stable@vger.kernel.org
Fixes: c59a1f106f5c ("KVM: x86/pmu: Add IA32_PEBS_ENABLE MSR emulation for extended PEBS")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Fix typos, most reported by "codespell arch/x86". Only touches comments,
no code changes.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20240103004011.1758650-1-helgaas@kernel.org
|
|
When running perf-stat command on Intel hybrid platform, perf-stat
reports the following errors:
sudo taskset -c 7 ./perf stat -vvvv -e cpu_atom/instructions/ sleep 1
Opening: cpu/cycles/:HG
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
config 0xa00000000
disabled 1
------------------------------------------------------------
sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8
sys_perf_event_open failed, error -16
Performance counter stats for 'sleep 1':
<not counted> cpu_atom/instructions/
It looks the cpu_atom/instructions/ event can't be enabled on atom PMU
even when the process is pinned on atom core. Investigation shows that
exclusive_event_init() helper always returns -EBUSY error in the perf
event creation. That's strange since the atom PMU should not be an
exclusive PMU.
Further investigation shows the issue was introduced by commit:
97588df87b56 ("perf/x86/intel: Add common intel_pmu_init_hybrid()")
The commit originally intents to clear the bit PERF_PMU_CAP_AUX_OUTPUT
from PMU capabilities if intel_cap.pebs_output_pt_available is not set,
but it incorrectly uses 'or' operation and leads to all PMU capabilities
bits are set to 1 except bit PERF_PMU_CAP_AUX_OUTPUT.
Testing this fix on Intel hybrid platforms, the observed issues
disappear.
Fixes: 97588df87b56 ("perf/x86/intel: Add common intel_pmu_init_hybrid()")
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231121014628.729989-1-dapeng1.mi@linux.intel.com
|
|
The branch counters logging (A.K.A LBR event logging) introduces a
per-counter indication of precise event occurrences in LBRs. It can
provide a means to attribute exposed retirement latency to combinations
of events across a block of instructions. It also provides a means of
attributing Timed LBR latencies to events.
The feature is first introduced on SRF/GRR. It is an enhancement of the
ARCH LBR. It adds new fields in the LBR_INFO MSRs to log the occurrences
of events on the GP counters. The information is displayed by the order
of counters.
The design proposed in this patch requires that the events which are
logged must be in a group with the event that has LBR. If there are
more than one LBR group, the counters logging information only from the
current group (overflowed) are stored for the perf tool, otherwise the
perf tool cannot know which and when other groups are scheduled
especially when multiplexing is triggered. The user can ensure it uses
the maximum number of counters that support LBR info (4 by now) by
making the group large enough.
The HW only logs events by the order of counters. The order may be
different from the order of enabling which the perf tool can understand.
When parsing the information of each branch entry, convert the counter
order to the enabled order, and store the enabled order in the extension
space.
Unconditionally reset LBRs for an LBR event group when it's deleted. The
logged counter information is only valid for the current LBR group. If
another LBR group is scheduled later, the information from the stale
LBRs would be otherwise wrongly interpreted.
Add a sanity check in intel_pmu_hw_config(). Disable the feature if other
counter filters (inv, cmask, edge, in_tx) are set or LBR call stack mode
is enabled. (For the LBR call stack mode, we cannot simply flush the
LBR, since it will break the call stack. Also, there is no obvious usage
with the call stack mode for now.)
Only applying the PERF_SAMPLE_BRANCH_COUNTERS doesn't require any branch
stack setup.
Expose the maximum number of supported counters and the width of the
counters into the sysfs. The perf tool can use the information to parse
the logged counters in each branch.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20231025201626.3000228-5-kan.liang@linux.intel.com
|
|
Some attrs and is_visible implementations are rather far away from one
another which makes the whole thing hard to interpret.
There are only two attribute groups which have both .attrs and
.is_visible, group_default and group_caps_lbr. Move them together.
No functional changes.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20231025201626.3000228-4-kan.liang@linux.intel.com
|
|
Currently, branch_sample_type !=0 is used to check whether a branch
stack setup is required. But it doesn't check the sample type,
unnecessary branch stack setup may be done for a counting event. E.g.,
perf record -e "{branch-instructions,branch-misses}:S" -j any
Also, the event only with the new PERF_SAMPLE_BRANCH_COUNTERS branch
sample type may not require a branch stack setup either.
Add a new flag NEEDS_BRANCH_STACK to indicate whether the event requires
a branch stack setup. Replace the needs_branch_stack() by checking the
new flag.
The counting event check is implemented here. The later patch will take
the new PERF_SAMPLE_BRANCH_COUNTERS into account.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20231025201626.3000228-2-kan.liang@linux.intel.com
|
|
Currently, the additional information of a branch entry is stored in a
u64 space. With more and more information added, the space is running
out. For example, the information of occurrences of events will be added
for each branch.
Two places were suggested to append the counters.
https://lore.kernel.org/lkml/20230802215814.GH231007@hirez.programming.kicks-ass.net/
One place is right after the flags of each branch entry. It changes the
existing struct perf_branch_entry. The later ARCH specific
implementation has to be really careful to consistently pick
the right struct.
The other place is right after the entire struct perf_branch_stack.
The disadvantage is that the pointer of the extra space has to be
recorded. The common interface perf_sample_save_brstack() has to be
updated.
The latter is much straightforward, and should be easily understood and
maintained. It is implemented in the patch.
Add a new branch sample type, PERF_SAMPLE_BRANCH_COUNTERS, to indicate
the event which is recorded in the branch info.
The "u64 counters" may store the occurrences of several events. The
information regarding the number of events/counters and the width of
each counter should be exposed via sysfs as a reference for the perf
tool. Define the branch_counter_nr and branch_counter_width ABI here.
The support will be implemented later in the Intel-specific patch.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20231025201626.3000228-1-kan.liang@linux.intel.com
|
|
The current ref-cycles event is only available on the fixed counter 2.
Starting from the GLC and GRT core, the architectural UnHalted Reference
Cycles event (0x013c) which is available on general-purpose counters
can collect the exact same events as the fixed counter 2.
Update the mapping of ref-cycles to 0x013c. So the ref-cycles can be
available on both fixed counter 2 and general-purpose counters.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230911144139.2354015-1-kan.liang@linux.intel.com
|
|
Unnecessary multiplexing is triggered when running an "instructions"
event on an MTL.
perf stat -e cpu_core/instructions/,cpu_core/instructions/ -a sleep 1
Performance counter stats for 'system wide':
115,489,000 cpu_core/instructions/ (50.02%)
127,433,777 cpu_core/instructions/ (49.98%)
1.002294504 seconds time elapsed
Linux architectural perf events, e.g., cycles and instructions, usually
have dedicated fixed counters. These events also have equivalent events
which can be used in the general-purpose counters. The counters are
precious. In the intel_pmu_check_event_constraints(), perf check/extend
the event constraints of these events. So these events can utilize both
fixed counters and general-purpose counters.
The following cleanup commit:
97588df87b56 ("perf/x86/intel: Add common intel_pmu_init_hybrid()")
forgot adding the intel_pmu_check_event_constraints() into update_pmu_cap().
The architectural perf events cannot utilize the general-purpose counters.
The code to check and update the counters, event constraints and
extra_regs is the same among hybrid systems. Move
intel_pmu_check_hybrid_pmus() to init_hybrid_pmu(), and
emove the duplicate check in update_pmu_cap().
Fixes: 97588df87b56 ("perf/x86/intel: Add common intel_pmu_init_hybrid()")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230911135128.2322833-1-kan.liang@linux.intel.com
|
|
The current hybrid initialization codes aren't well organized and are
hard to read.
Factor out intel_pmu_init_hybrid() to do a common setup for each
hybrid PMU. The PMU-specific capability will be updated later via either
hard code (ADL) or CPUID hybrid enumeration (MTL).
Splitting the ADL and MTL initialization codes, since they have
different uarches. The hard code PMU capabilities are not required for
MTL either. They can be enumerated by the new leaf 0x23 and
IA32_PERF_CAPABILITIES MSR.
The hybrid enumeration of the IA32_PERF_CAPABILITIES MSR is broken on
MTL. Using the default value.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230829125806.3016082-7-kan.liang@linux.intel.com
|
|
There is a fairly long list of grievances about the current code. The
main beefs:
1. hybrid_big_small assumes that the *HARDWARE* (CPUID) provided
core types are a bitmap. They are not. If Intel happened to
make a core type of 0xff, hilarity would ensue.
2. adl_get_hybrid_cpu_type() utterly inscrutable. There are
precisely zero comments and zero changelog about what it is
attempting to do.
According to Kan, the adl_get_hybrid_cpu_type() is there because some
Alder Lake (ADL) CPUs can do some silly things. Some ADL models are
*supposed* to be hybrid CPUs with big and little cores, but there are
some SKUs that only have big cores. CPUID(0x1a) on those CPUs does
not say that the CPUs are big cores. It apparently just returns 0x0.
It confuses perf because it expects to see either 0x40 (Core) or
0x20 (Atom).
The perf workaround for this is to watch for a CPU core saying it is
type 0x0. If that happens on an Alder Lake, it calls
x86_pmu.get_hybrid_cpu_type() and just assumes that the core is a
Core (0x40) CPU.
To fix up the mess, separate out the CPU types and the 'pmu' types.
This allows 'hybrid_pmu_type' bitmaps without worrying that some
future CPU type will set multiple bits.
Since the types are now separate, add a function to glue them back
together again. Actual comment on the situation in the glue
function (find_hybrid_pmu_for_cpu()).
Also, give ->get_hybrid_cpu_type() a real return type and make it
clear that it is overriding the *CPU* type, not the PMU type.
Rename cpu_type to pmu_type in the struct x86_hybrid_pmu to reflect the
change.
Originally-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230829125806.3016082-6-kan.liang@linux.intel.com
|
|
Use the intel_pmu_init_glc() and intel_pmu_init_grt() to replace the
duplicate code for ADL.
The current code already checks the PERF_X86_EVENT_TOPDOWN flag before
invoking the Topdown metrics functions. (The PERF_X86_EVENT_TOPDOWN flag
is to indicate the Topdown metric feature, which is only available for
the p-core.) Drop the unnecessary adl_set_topdown_event_period() and
adl_update_topdown_event().
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230829125806.3016082-5-kan.liang@linux.intel.com
|
|
From PMU's perspective, the ADL e-core and newer SRF/GRR have a similar
uarch. Most of the initialization code can be shared.
Factor out intel_pmu_init_grt() for the common initialization code.
The common part of the ADL e-core will be replaced by the later patch.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230829125806.3016082-4-kan.liang@linux.intel.com
|
|
The SPR and ADL p-core have a similar uarch. Most of the initialization
code can be shared.
Factor out intel_pmu_init_glc() for the common initialization code.
The common part of the ADL p-core will be replaced by the later patch.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230829125806.3016082-3-kan.liang@linux.intel.com
|
|
From PMU's perspective, the SPR/GNR server has a similar uarch to the
ADL/MTL client p-core. Many functions are shared. However, the shared
function name uses the abbreviation of the server product code name,
rather than the common uarch code name.
Rename these internal shared functions by the common uarch name.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230829125806.3016082-2-kan.liang@linux.intel.com
|
|
Pull perf event updates from Ingo Molnar:
- AMD IBS improvements
- Intel PMU driver updates
- Extend core perf facilities & the ARM PMU driver to better handle ARM big.LITTLE events
- Micro-optimize software events and the ring-buffer code
- Misc cleanups & fixes
* tag 'perf-core-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/uncore: Remove unnecessary ?: operator around pcibios_err_to_errno() call
perf/x86/intel: Add Crestmont PMU
x86/cpu: Update Hybrids
x86/cpu: Fix Crestmont uarch
x86/cpu: Fix Gracemont uarch
perf: Remove unused extern declaration arch_perf_get_page_size()
perf: Remove unused PERF_PMU_CAP_HETEROGENEOUS_CPUS capability
arm_pmu: Remove unused PERF_PMU_CAP_HETEROGENEOUS_CPUS capability
perf/x86: Remove unused PERF_PMU_CAP_HETEROGENEOUS_CPUS capability
arm_pmu: Add PERF_PMU_CAP_EXTENDED_HW_TYPE capability
perf/x86/ibs: Set mem_lvl_num, mem_remote and mem_hops for data_src
perf/mem: Add PERF_MEM_LVLNUM_NA to PERF_MEM_NA
perf/mem: Introduce PERF_MEM_LVLNUM_UNC
perf/ring_buffer: Use local_try_cmpxchg in __perf_output_begin
locking/arch: Avoid variable shadowing in local_try_cmpxchg()
perf/core: Use local64_try_cmpxchg in perf_swevent_set_period
perf/x86: Use local64_try_cmpxchg
perf/amd: Prevent grouping of IBS events
|
|
The Grand Ridge and Sierra Forest are successors to Snow Ridge. They
both have Crestmont core. From the core PMU's perspective, they are
similar to the e-core of MTL. The only difference is the LBR event
logging feature, which will be implemented in the following patches.
Create a non-hybrid PMU setup for Grand Ridge and Sierra Forest.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lore.kernel.org/r/20230522113040.2329924-1-kan.liang@linux.intel.com
|
|
Alderlake N is an E-core only product using Gracemont
micro-architecture. It fits the pre-existing naming scheme perfectly
fine, adhere to it.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230807150405.686834933@infradead.org
|
|
On SPR, the load latency event needs an auxiliary event in the same
group to work properly. There's a check in intel_pmu_hw_config()
for this to iterate sibling events and find a mem-loads-aux event.
The for_each_sibling_event() has a lockdep assert to make sure if it
disabled hardirq or hold leader->ctx->mutex. This works well if the
given event has a separate leader event since perf_try_init_event()
grabs the leader->ctx->mutex to protect the sibling list. But it can
cause a problem when the event itself is a leader since the event is
not initialized yet and there's no ctx for the event.
Actually I got a lockdep warning when I run the below command on SPR,
but I guess it could be a NULL pointer dereference.
$ perf record -d -e cpu/mem-loads/uP true
The code path to the warning is:
sys_perf_event_open()
perf_event_alloc()
perf_init_event()
perf_try_init_event()
x86_pmu_event_init()
hsw_hw_config()
intel_pmu_hw_config()
for_each_sibling_event()
lockdep_assert_event_ctx()
We don't need for_each_sibling_event() when it's a standalone event.
Let's return the error code directly.
Fixes: f3c0eba28704 ("perf: Add a few assertions")
Reported-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20230704181516.3293665-1-namhyung@kernel.org
|
|
Pull perf events updates from Ingo Molnar:
- Rework & fix the event forwarding logic by extending the core
interface.
This fixes AMD PMU events that have to be forwarded from the
core PMU to the IBS PMU.
- Add self-tests to test AMD IBS invocation via core PMU events
- Clean up Intel FixCntrCtl MSR encoding & handling
* tag 'perf-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Re-instate the linear PMU search
perf/x86/intel: Define bit macros for FixCntrCtl MSR
perf test: Add selftest to test IBS invocation via core pmu events
perf/core: Remove pmu linear searching code
perf/ibs: Fix interface via core pmu events
perf/core: Rework forwarding of {task|cpu}-clock events
|
|
When counting a FRONTEND event, the MSR_PEBS_FRONTEND is not correctly
set on GNR and MTL p-core.
The umask value for the FRONTEND events is changed on GNR and MTL. The
new umask is missing in the extra_regs[] table.
Add a dedicated intel_gnr_extra_regs[] for GNR and MTL p-core.
Fixes: bc4000fdb009 ("perf/x86/intel: Add Granite Rapids")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20230615173242.3726364-1-kan.liang@linux.intel.com
|
|
After commit b752ea0c28e3 ("perf/x86/intel/ds: Flush PEBS DS when changing
PEBS_DATA_CFG"), the cpuc->pebs_data_cfg may save some bits that are not
supported by real hardware, such as PEBS_UPDATE_DS_SW. This would cause
the VMX hardware MSR switching mechanism to save/restore invalid values
for PEBS_DATA_CFG MSR, thus crashing the host when PEBS is used for guest.
Fix it by using the active host value from cpuc->active_pebs_data_cfg.
Fixes: b752ea0c28e3 ("perf/x86/intel/ds: Flush PEBS DS when changing PEBS_DATA_CFG")
Signed-off-by: Like Xu <likexu@tencent.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230517133808.67885-1-likexu@tencent.com
|
|
Define bit macros for FixCntrCtl MSR and replace the bit hardcoding
with these bit macros. This would make code be more human-readable.
Perf commands 'perf stat -e "instructions,cycles,ref-cycles"' and
'perf record -e "instructions,cycles,ref-cycles"' pass.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230504072128.3653470-1-dapeng1.mi@linux.intel.com
|
|
From core PMU's perspective, Granite Rapids is similar to the Sapphire
Rapids. The key differences include:
- Doesn't need the AUX event workaround for the mem load event.
(Implement in this patch).
- Support Retire Latency (Has been implemented in the commit
c87a31093c70 ("perf/x86: Support Retire Latency"))
- The event list, which will be supported in the perf tool later.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230314170041.2967712-1-kan.liang@linux.intel.com
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Provide a virtual cache topology to the guest to avoid
inconsistencies with migration on heterogenous systems. Non secure
software has no practical need to traverse the caches by set/way in
the first place
- Add support for taking stage-2 access faults in parallel. This was
an accidental omission in the original parallel faults
implementation, but should provide a marginal improvement to
machines w/o FEAT_HAFDBS (such as hardware from the fruit company)
- A preamble to adding support for nested virtualization to KVM,
including vEL2 register state, rudimentary nested exception
handling and masking unsupported features for nested guests
- Fixes to the PSCI relay that avoid an unexpected host SVE trap when
resuming a CPU when running pKVM
- VGIC maintenance interrupt support for the AIC
- Improvements to the arch timer emulation, primarily aimed at
reducing the trap overhead of running nested
- Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
interest of CI systems
- Avoid VM-wide stop-the-world operations when a vCPU accesses its
own redistributor
- Serialize when toggling CPACR_EL1.SMEN to avoid unexpected
exceptions in the host
- Aesthetic and comment/kerneldoc fixes
- Drop the vestiges of the old Columbia mailing list and add [Oliver]
as co-maintainer
RISC-V:
- Fix wrong usage of PGDIR_SIZE instead of PUD_SIZE
- Correctly place the guest in S-mode after redirecting a trap to the
guest
- Redirect illegal instruction traps to guest
- SBI PMU support for guest
s390:
- Sort out confusion between virtual and physical addresses, which
currently are the same on s390
- A new ioctl that performs cmpxchg on guest memory
- A few fixes
x86:
- Change tdp_mmu to a read-only parameter
- Separate TDP and shadow MMU page fault paths
- Enable Hyper-V invariant TSC control
- Fix a variety of APICv and AVIC bugs, some of them real-world, some
of them affecting architecurally legal but unlikely to happen in
practice
- Mark APIC timer as expired if its in one-shot mode and the count
underflows while the vCPU task was being migrated
- Advertise support for Intel's new fast REP string features
- Fix a double-shootdown issue in the emergency reboot code
- Ensure GIF=1 and disable SVM during an emergency reboot, i.e. give
SVM similar treatment to VMX
- Update Xen's TSC info CPUID sub-leaves as appropriate
- Add support for Hyper-V's extended hypercalls, where "support" at
this point is just forwarding the hypercalls to userspace
- Clean up the kvm->lock vs. kvm->srcu sequences when updating the
PMU and MSR filters
- One-off fixes and cleanups
- Fix and cleanup the range-based TLB flushing code, used when KVM is
running on Hyper-V
- Add support for filtering PMU events using a mask. If userspace
wants to restrict heavily what events the guest can use, it can now
do so without needing an absurd number of filter entries
- Clean up KVM's handling of "PMU MSRs to save", especially when vPMU
support is disabled
- Add PEBS support for Intel Sapphire Rapids
- Fix a mostly benign overflow bug in SEV's
send|receive_update_data()
- Move several SVM-specific flags into vcpu_svm
x86 Intel:
- Handle NMI VM-Exits before leaving the noinstr region
- A few trivial cleanups in the VM-Enter flows
- Stop enabling VMFUNC for L1 purely to document that KVM doesn't
support EPTP switching (or any other VM function) for L1
- Fix a crash when using eVMCS's enlighted MSR bitmaps
Generic:
- Clean up the hardware enable and initialization flow, which was
scattered around multiple arch-specific hooks. Instead, just let
the arch code call into generic code. Both x86 and ARM should
benefit from not having to fight common KVM code's notion of how to
do initialization
- Account allocations in generic kvm_arch_alloc_vm()
- Fix a memory leak if coalesced MMIO unregistration fails
selftests:
- On x86, cache the CPU vendor (AMD vs. Intel) and use the info to
emit the correct hypercall instruction instead of relying on KVM to
patch in VMMCALL
- Use TAP interface for kvm_binary_stats_test and tsc_msrs_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (325 commits)
KVM: SVM: hyper-v: placate modpost section mismatch error
KVM: x86/mmu: Make tdp_mmu_allowed static
KVM: arm64: nv: Use reg_to_encoding() to get sysreg ID
KVM: arm64: nv: Only toggle cache for virtual EL2 when SCTLR_EL2 changes
KVM: arm64: nv: Filter out unsupported features from ID regs
KVM: arm64: nv: Emulate EL12 register accesses from the virtual EL2
KVM: arm64: nv: Allow a sysreg to be hidden from userspace only
KVM: arm64: nv: Emulate PSTATE.M for a guest hypervisor
KVM: arm64: nv: Add accessors for SPSR_EL1, ELR_EL1 and VBAR_EL1 from virtual EL2
KVM: arm64: nv: Handle SMCs taken from virtual EL2
KVM: arm64: nv: Handle trapped ERET from virtual EL2
KVM: arm64: nv: Inject HVC exceptions to the virtual EL2
KVM: arm64: nv: Support virtual EL2 exceptions
KVM: arm64: nv: Handle HCR_EL2.NV system register traps
KVM: arm64: nv: Add nested virt VCPU primitives for vEL2 VCPU state
KVM: arm64: nv: Add EL2 system registers to vcpu context
KVM: arm64: nv: Allow userspace to set PSR_MODE_EL2x
KVM: arm64: nv: Reset VCPU to EL2 registers if VCPU nested virt is set
KVM: arm64: nv: Introduce nested virtualization VCPU feature
KVM: arm64: Use the S2 MMU context to iterate over S2 table
...
|
Kan Liang
Dave Hansen
Adrian Hunter
Dapeng Mi
Tony Luck
Lukas Wunner
Thomas Gleixner
Linus Torvalds
Paolo Bonzini
Bjorn Helgaas
Peter Zijlstra
Namhyung Kim
Like Xu